Error: When importing a Webserive using AWS Model
Hi Experts,
The webservice is created in .NET and i am able to test the same.
When i try to import the same into Webdynpro, i am getting the following error.
Even i tried to import the webservice after saving it locally also, i am getting the following error.
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.WebserviceClientException: GenericServiceFactory initialization problem. Could not load web service model. See nested exception for details.
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:149)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.<init>(DGenericServiceImpl.java:49)
at com.sap.engine.services.webservices.espbase.client.dynamic.GenericServiceFactory.createService(GenericServiceFactory.java:71)
at com.sap.tc.webdynpro.model.webservice.metadata.WSModelInfo.getOrCreateWsrService(WSModelInfo.java:411)
... 53 more
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.ProxyGeneratorException: Proxy Generator Error. Problem with WSDL file parsing. See nested message.
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:182)
at com.sap.engine.services.webservices.espbase.client.dynamic.impl.DGenericServiceImpl.generateProxyFiles(DGenericServiceImpl.java:146)
... 56 more
Caused by: com.sap.engine.lib.xml.util.NestedException: IO Exception occurred while parsing file:Cannot connect to http://xxx/ws/service.asmx?Config1.WSDL, passing via http proxy: :80: Connection refused: connect -> java.io.IOException: Cannot connect to http://xxxx/ws/service.asmx?Config1.WSDL, passing via http proxy: :80: Connection refused: connect
at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1028)
at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadWSDLDocument(WSDLDOMLoader.java:1115)
at com.sap.engine.services.webservices.jaxrpc.wsdl2java.ProxyGenerator.generateProxy(ProxyGenerator.java:178)
... 57 more
Caused by: java.io.IOException: Cannot connect to http://xxxx/ws/service.asmx?Config1.WSDL, passing via http proxy: :80: Connection refused: connect
at com.sap.engine.services.webservices.tools.WSDLDownloadResolver.resolveEntity(WSDLDownloadResolver.java:161)
at com.sap.engine.services.webservices.wsdl.WSDLDOMLoader.loadDOMDocument(WSDLDOMLoader.java:1008)
... 59 more
Thanks & Regards,
Palani
Edited by: Palaniappan A on Jan 5, 2010 6:05 AM
Hi Experts,
I am not able to Paste, WSDL code here.
Please help me to sort out this problem.
<?xml version="1.0" encoding="utf-8" ?>
- <wsdl:definitions xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:tm="http://microsoft.com/wsdl/mime/textMatching/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="Wartsila.PTIP.WebServices.CatalogueServices" xmlns:s="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" targetNamespace="Wartsila.PTIP.WebServices.CatalogueServices" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/">
- <wsdl:types>
- <s:schema elementFormDefault="qualified" targetNamespace="Wartsila.PTIP.WebServices.CatalogueServices">
- <s:element name="GetMaterialInfo">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="materialNumber" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="materialDescription" type="s:string" />
</s:sequence>
</s:complexType>
</s:element>
- <s:element name="GetMaterialInfoResponse">
- <s:complexType>
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="GetMaterialInfoResult" type="tns:ArrayOfMaterialInfo" />
</s:sequence>
</s:complexType>
</s:element>
- <s:complexType name="ArrayOfMaterialInfo">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="unbounded" name="MaterialInfo" nillable="true" type="tns:MaterialInfo" />
</s:sequence>
</s:complexType>
- <s:complexType name="MaterialInfo">
- <s:sequence>
<s:element minOccurs="0" maxOccurs="1" name="VendorNumber" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="CurrencyCode" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="MaterialNumber" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="ShortText" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="OrderUnit" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="NetPrice" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="PriceUnit" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="MaterialGroup" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="DeliveryTime" type="s:string" />
<s:element minOccurs="0" maxOccurs="1" name="GlAccount" type="s:string" />
</s:sequence>
</s:complexType>
<s:element name="ArrayOfMaterialInfo" nillable="true" type="tns:ArrayOfMaterialInfo" />
</s:schema>
</wsdl:types>
- <wsdl:message name="GetMaterialInfoSoapIn">
<wsdl:part name="parameters" element="tns:GetMaterialInfo" />
</wsdl:message>
- <wsdl:message name="GetMaterialInfoSoapOut">
<wsdl:part name="parameters" element="tns:GetMaterialInfoResponse" />
</wsdl:message>
- <wsdl:message name="GetMaterialInfoHttpGetIn">
<wsdl:part name="materialNumber" type="s:string" />
<wsdl:part name="materialDescription" type="s:string" />
</wsdl:message>
- <wsdl:message name="GetMaterialInfoHttpGetOut">
<wsdl:part name="Body" element="tns:ArrayOfMaterialInfo" />
</wsdl:message>
- <wsdl:message name="GetMaterialInfoHttpPostIn">
<wsdl:part name="materialNumber" type="s:string" />
<wsdl:part name="materialDescription" type="s:string" />
</wsdl:message>
- <wsdl:message name="GetMaterialInfoHttpPostOut">
<wsdl:part name="Body" element="tns:ArrayOfMaterialInfo" />
</wsdl:message>
- <wsdl:portType name="ServiceSoap">
- <wsdl:operation name="GetMaterialInfo">
<wsdl:input message="tns:GetMaterialInfoSoapIn" />
<wsdl:output message="tns:GetMaterialInfoSoapOut" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:portType name="ServiceHttpGet">
- <wsdl:operation name="GetMaterialInfo">
<wsdl:input message="tns:GetMaterialInfoHttpGetIn" />
<wsdl:output message="tns:GetMaterialInfoHttpGetOut" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:portType name="ServiceHttpPost">
- <wsdl:operation name="GetMaterialInfo">
<wsdl:input message="tns:GetMaterialInfoHttpPostIn" />
<wsdl:output message="tns:GetMaterialInfoHttpPostOut" />
</wsdl:operation>
</wsdl:portType>
- <wsdl:binding name="ServiceSoap" type="tns:ServiceSoap">
<soap:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetMaterialInfo">
<soap:operation soapAction="Wartsila.PTIP.WebServices.CatalogueServices/GetMaterialInfo" style="document" />
- <wsdl:input>
<soap:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:binding name="ServiceSoap12" type="tns:ServiceSoap">
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http" />
- <wsdl:operation name="GetMaterialInfo">
<soap12:operation soapAction="Wartsila.PTIP.WebServices.CatalogueServices/GetMaterialInfo" style="document" />
- <wsdl:input>
<soap12:body use="literal" />
</wsdl:input>
- <wsdl:output>
<soap12:body use="literal" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:binding name="ServiceHttpGet" type="tns:ServiceHttpGet">
<http:binding verb="GET" />
- <wsdl:operation name="GetMaterialInfo">
<http:operation location="/GetMaterialInfo" />
- <wsdl:input>
<http:urlEncoded />
</wsdl:input>
- <wsdl:output>
<mime:mimeXml part="Body" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:binding name="ServiceHttpPost" type="tns:ServiceHttpPost">
<http:binding verb="POST" />
- <wsdl:operation name="GetMaterialInfo">
<http:operation location="/GetMaterialInfo" />
- <wsdl:input>
<mime:content type="application/x-www-form-urlencoded" />
</wsdl:input>
- <wsdl:output>
<mime:mimeXml part="Body" />
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
- <wsdl:service name="Service">
- <wsdl:port name="ServiceSoap" binding="tns:ServiceSoap">
<soap:address location="http://ptipqa.wartsila.com/ws/service.asmx" />
</wsdl:port>
- <wsdl:port name="ServiceSoap12" binding="tns:ServiceSoap12">
<soap12:address location="http://ptipqa.wartsila.com/ws/service.asmx" />
</wsdl:port>
- <wsdl:port name="ServiceHttpGet" binding="tns:ServiceHttpGet">
<http:address location="http://ptipqa.wartsila.com/ws/service.asmx" />
</wsdl:port>
- <wsdl:port name="ServiceHttpPost" binding="tns:ServiceHttpPost">
<http:address location="http://ptipqa.wartsila.com/ws/service.asmx" />
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
Regards,
Palani
Edited by: Palaniappan A on Jan 11, 2010 6:49 AM
Similar Messages
-
Error when importing business layer using the eulpi
Hi there,
I have a problem importing a new business area into my TEST EUL environment from my DEV EUL. (they are on different databases, i.e. one EUL for each database but all databases are identical apart from database name).
i.e. 1st I export the business area from DEV using the following command:
eulapi -connect username/password@${DATABASE} -export ${EXP_FILE} -business_area "${BUS_AREA}" -identifier -log ${LOG_FILE} -audit_info
and it works perfectly, and I can import the resulting Business area file into a new EUL if the Business area already exists, however, if the business area does not exist on the TEST eul then I get the following error using the command:
eulapi -connect username/password@${DATABASE} -import ${EXP_FILE} -identifier -preserve_workbook_owner -import_rename_mode refresh -log ${LOG_FILE}
Could not locate the Folder with identifier 'XXXXX' in the target End User Layer
Import completed, but with warnings. Please check the result.
This command works to replace the business area if it already exists, but fails if the business area does not already exist, which is actually what I want to do, i.e. create business area in DEV and export it and then import to TEST as part of the test cycle.
The above command actually creates the business area but not the underlying folder. All permissions, database links etc on both DEV and TEST environments are identical.
Your help is appreciated!Hi,
The export of the business area contains details of the business area and which folders are contained in the business area, but not the details of the folders themselves.
Hence if you import a new business area and the folders contained in the BA are not in the EUL you will get an error locating the folder.
Therefore to create a new BA you need to export all the folders in the BA and then export the BA itself. Then when you import you need to import the new folders first, then the BA.
Rod West -
Error when importing from Excel in SAP
Hello experts,
My gets error when importing price list using the import form Xl menu :
(-1200) DBMCconnBase::EndTransaction SQLEndTran sqlState 08S01, nativeErr: 0, errText:[Microsoft][SQL Native Client] Communication link failure
This happens only when connected with SAP Client, it never happens when connected in terminal server directly on SAP server.
Server 2003, MSSQL 2005 SP2
SAP 2007 Sp01 PL08 HF01
This has always been working before, it has stopped working when he changed the motherboard 3 weeks ago. Nothing else have changed.
Any idea where to look at?
Thanks!
Chrishello Gordon,
Thanks for your answer. that would have probaly fix the issue
my techs fixed the issue by doing the 2 following thinks, i don't know if only one of them would have fix it.
1. in the boot.ini file there was a /3G in the end, restricting the memory to 1G for the OS. The tech deleted it.
2. in management studio, the technician changed the memory reserved for sql from 9/12 to 14/16Gb
there was probably not enough RAM available for the import.
since that change it works well.
Thanks again!
Christophe -
Error when working with TableView using JCA
Hi sdns,
I am getting an iview rutnime error when working with Tableview using JCA. Here i am putting all my code, go thorugh it and tell me if any error is there.One more thing is Usermappping and all properties are set to system object.
Now you can throught he code which is followed by error also.
<u>Java file.</u>
public class DisplayComponent extends PageProcessorComponent {
public DynPage getPage() {
return new DisplayComponentDynPage();
public static class DisplayComponentDynPage extends JSPDynPage {
private JCATviewBean bean;
public void doInitialization() {
IPortalComponentProfile profile =
((IPortalComponentRequest) getRequest())
.getComponentContext()
.getProfile();
Object o = profile.getValue("myBean");
if (o == null || !(o instanceof JCATviewBean)) {
bean = new JCATviewBean();
profile.putValue("myBean", bean);
} else {
bean = (JCATviewBean) o;
// fill your bean with data here...
IPortalComponentRequest request =
(IPortalComponentRequest) this.getRequest();
doJca(request);
public void doProcessAfterInput() throws PageException {
public void doProcessBeforeOutput() throws PageException {
this.setJspName("Report.jsp");
private IConnection getConnection(
IPortalComponentRequest request,
String alias)
throws Exception {
IConnectorGatewayService cgService =
(IConnectorGatewayService) PortalRuntime
.getRuntimeResources()
.getService(
IConnectorService.KEY);
ConnectionProperties prop =
new ConnectionProperties(
request.getLocale(),
request.getUser());
return cgService.getConnection(alias, prop);
public void doJca(IPortalComponentRequest request) {
IConnectionFactory connectionFactory = null;
IConnection client = null;
String rfm_name = "BAPI_COMPANYCODE_GETLIST";
try {
try {
// pass the request & system alias
// Change the alias to whatever the alias is for your R/3 system
client = getConnection(request, "MyIDES");
} catch (Exception e) {
System.out.println(
"Couldn't establish a connection with a target system.");
return;
Start Interaction
IInteraction interaction = client.createInteractionEx();
IInteractionSpec interactionSpec =
interaction.getInteractionSpec();
interactionSpec.setPropertyValue("Name", rfm_name);
CCI api only has one datatype: Record
RecordFactory recordFactory = interaction.getRecordFactory();
MappedRecord importParams =
recordFactory.createMappedRecord(
"CONTAINER_OF_IMPORT_PARAMS");
IFunctionsMetaData functionsMetaData =
client.getFunctionsMetaData();
IFunction function = functionsMetaData.getFunction(rfm_name);
if (function == null) {
System.out.println(
"Couldn't find " + rfm_name + " in a target system.");
return;
How to invoke Function modules
System.out.println("Invoking... " + function.getName());
MappedRecord exportParams =
(MappedRecord) interaction.execute(
interactionSpec,
importParams);
How to get structure values
IRecord exportStructure = (IRecord) exportParams.get("RETURN");
String columnOne = exportStructure.getString("TYPE");
String columnTwo = exportStructure.getString("CODE");
String columnThree = exportStructure.getString("MESSAGE");
System.out.println(" RETURN-TYPE = " + columnOne);
System.out.println(" RETURN-CODE = " + columnTwo);
System.out.println(" RETURN-MESSAGE =" + columnThree);
How to get table values
IRecordSet exportTable =
(IRecordSet) exportParams.get("COMPANYCODE_LIST");
exportTable.beforeFirst();
// Moves the cursor before the first row.
while (exportTable.next()) {
String column_1 = exportTable.getString("COMP_CODE");
String column_2 = exportTable.getString("COMP_NAME");
System.out.println(
" COMPANYCODE_LIST-COMP_CODE = " + column_1);
System.out.println(
" COMPANYCODE_LIST-COMP_NAME = " + column_2);
// create the tableview mode in the bean
bean.createData(exportTable);
Closing the connection
client.close();
} catch (ConnectorException e) {
// app.putValue("error", e);
System.out.println("Caught an exception: \n" + e);
} catch (Exception e) {
System.out.println("Caught an exception: \n" + e);
<u>Bena file</u>
package com.sap.JCA.bean;
import java.util.Vector;
import com.sapportals.connector.execution.structures.IRecordSet;
import com.sapportals.htmlb.table.DefaultTableViewModel;
import com.sapportals.htmlb.table.TableViewModel;
public class JCATviewBean {
public DefaultTableViewModel model;
public TableViewModel getModel() {
return this.model;
public void setModel(DefaultTableViewModel model) {
this.model = model;
public void createData(IRecordSet table) {
// this is your column names
Vector column = new Vector();
column.addElement("Company Code");
column.addElement("Company Name");
// all this logic is for the data part.
Vector rVector = new Vector();
try {
table.beforeFirst();
while (table.next()) {
Vector data = new Vector();
data.addElement(table.getString("COMP_CODE"));
data.addElement(table.getString("COMP_NAME"));
rVector.addElement(data);
} catch (Exception e) {
e.printStackTrace();
// this is where you create the model
this.setModel(new DefaultTableViewModel(rVector, column));
<b>JSP File:</b>
<%@ taglib uri="tagLib" prefix="hbj" %>
<jsp:useBean id="myBean" scope="application" class="com.sap.JCA.bean.JCATviewBean" />
<hbj:content id="myContext" >
<hbj:page title="PageTitle">
<hbj:form id="myFormId" >
<br>
<hbj:textView id = "tv1" text = "<b>TableView Example Using JCA</b> <br>"/>
<hbj:tableView
id="myTableView1"
model="myBean.model"
design="ALTERNATING"
headerVisible="true"
footerVisible="true"
fillUpEmptyRows="true"
navigationMode="BYLINE"
selectionMode="MULTISELECT"
headerText="TableView example1"
visibleFirstRow="1"
visibleRowCount="30"
width="500 px"
/>
</hbj:form>
</hbj:page>
</hbj:content>
<b>Error when Executing this component:</b><u></u>
Portal Runtime Error
<b>An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com/sapportals/portal/htmlb/page/PageProcessorComponent.
Exception id: 12:21_28/10/05_0173_94105150
See the details for the exception ID in the log file</b>
If anybody find the error please reply to this post.
Regards,
sireesha.Thanks for your response Martin,
I have already seen the log file but im couldn't findout anything from that since it is so long here im putting some part of please see this.if u able to find it clarify me,
<b>Here the log file:</b>
1.5#001321FD6213005D0000907100001CB000040419258FBF4E#1130405957843#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907200001CB00004041925916735#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907300001CB0000404192591688D#1130405957953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120E00001CB00004041925C953D7#1130405961625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907400001CB000040419275B24FC#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907500001CB000040419275B25D9#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907600001CB000040419275B2E27#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907700001CB000040419275B2EFA#1130405987953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD6213005D0000907800001CB0000404192924ED59#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907900001CB0000404192924EE36#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907A00001CB0000404192924F652#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907B00001CB0000404192924F710#1130406017953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job#
#1.5#001321FD621300650000120F00001CB000040419295CCD8B#1130406021625#com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory##com.sap.aii.af.sample.adapter.ra.SPIManagedConnectionFactory.XIManagedConnectionFactoryController.run()######04d7f690469311da8d52001321fd6213#Thread[Thread-114,5,SAPEngine_System_Thread[impl:5]_Group]##0#0#Debug#1#/Applications/ExchangeInfrastructure/AdapterFramework/ThirdPartyRoot/comsap/Server/Adapter Framework#Java###MCF with GUID is running. (,)#3#964bfca0444711dabb51001321fd6213#com.sap.engine.services.deploy.server.ApplicationLoader@1586c77#964bfca0444711dabb51001321fd6213#
#1.5#001321FD6213005D0000907C00001CB0000404192AEEB1E2#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###within the infinite of the Scheduler Thread#
#1.5#001321FD6213005D0000907D00001CB0000404192AEEB2C0#1130406047953#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.persistence.jdo.DataBaseJobStore#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler/JobStore#Plain###With in the acquireLockForNextAvailableJob DataStore#
#1.5#001321FD6213005D0000907E00001CB0000404192AEEBAD8#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Acquired the job null#
#1.5#001321FD6213005D0000907F00001CB0000404192AEEBB9E#1130406047968#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#sap.com/crm.trexr3#trexr3.com.sapmarkets.isa.services.schedulerservice.SchedulerThread#J2EE_ADMIN#530##obtdev3_O09_94105150#Guest#8a2bbd20444711da932c001321fd6213#Thread[SchedulerThread,5,SAPEngine_Application_Thread[impl:3]_Group]##0#0#Info#1#/System/Scheduler#Plain###Did not find any job.So, Waiting for sometime for the next job# -
Error when import BI content 3.5.3
Hi All
I have error when import BI content 3.5.3 step at Tcode 'SAINT' (file SAPKIBIFIH.car) for mySAP ERP 2004 (ECC 5.0 IDES).
The error occur in step 3/5 after enter SAINT:Passw request.
System shown information "<b>Queue SAPKLTHQ10 has not yet been confirmed</b>".
In step 4/5 sytem shown statue/remarks "<b>The Add-on installation terminated during phase PROLOGUE</b>".
I think about installation THAI font package at Tcode "SMLT" uncompleted.
I run report <b>"RSCPINST"</b> at Tcode "SE38" for editing codepage after that the system shown error message "<b>MDMP is not supported foe SAP Business Information Warehouse. Message no.RIN010"</b> Please see sap note 563975.
<b>Note:</b> When i import Thai font package "SAPKLTHQ10" using Tcode "SMLT" the system shown error message "TL1277" in define schedule job step.
Message no. TL137
Diagnosis
You want to start the post-import methods for special texts (calendar texts, terminology, and glossary) for language Thai.
Before this can happen, the system checks whether this server is prepared for this language. The system also checks whether the language environment can be switched dynamically on this server (see ABAP command SET LOCAL LANGUAGE).
System response
The system established that the language environment cannot be switched to language Thai.
The language transport is stopped at this point.
Procedure
The switch of the language environment may fail for the following reasons:
1. The database codepage is not up-to-date.
2. The codepage information for language Thai is not up-to-date.
3. Locales for language Thai do not exist, or are invalid, at the operating system level.
4. The profile parameter zcsa/installed_languages has to be adjusted.
If an error occurs, proceed as follows:
1. Find out the name of the server on which the language import job ran. Log on to this server.
2. Check the language configuration using report RSCPINST. Solve the reported problem there.
If your system consists of multiple application servers and not all of them have authorization for language Thai, continue the language import on a server that has authorization for language Thai.
plaese help me to solve this problem.
thank a lot for all solutions.
Mooping.This is a long story that you write, but your problem seems just that you must "Confirm the queue". Is that correct?
Without this step no further Support Packages can be inserted into the system. Confirming the queue is done by one of the buttons in the SPAM transaction. Just put the mouse on the buttons and read the quick help to differentiate between the buttons.
I have never had a problem like this but I think it can happen if, together with the new BI version you also include one or more support packs. This happens automatically if these packages are available, so you may not even have noticed it. -
Error when importing CO Hierarchies from R/3 DEV to R/3 QAS
Dear SDN,
I am getting the following error when importing Cost center and cost element hierarchies from R/3 DEV to R/3 QAS...
Object OSOA 0COSTCENTER_0101_HIER has not yet been imported successfully
Object OSOA 0COSTELMNT_0102_HIER has not yet been imported successfully
Ended with Return code ===8...
But The two hierarchies were available in R/3 QAS and also i am able to utilise..
My doubt is if i transport these hierarchies from R/3 QAS to R/3 Production any major issues...
Now i want to test a data in BW DEV from R/3 Production data...
So, I am planning to transport These hierarchies from R/3 QAS to R/3 PROD...
Here we do not have BW QAS...So, getting data from R/3Production to BW DEV and testing...
After testing Directly use in BW Production...
So, Please suggest me why when importing these hierarchies errors occuring???
Help will be greatly appreciated with points...
Thanks in advance...Hi Venkat,
Please go through the following threads...
Hierarchy Transports
Transporting cost center and profit center standard hierarchies
/community [original link is broken]://Transporting a hierarchy
Transport Hierarchy
Khaja -
CL_SFW_SYSTEM_SETTINGS error when importing SPs
When we want to import the support packages SAP_BASIS, SAP_ABA, SAP_BW,
PI-BASIS untill packages level 7 ( we come from level 4) and the HR
untill package level 26 we run into the short text error when importing
the basis, aba, pi-basis and bw package.
I tried to use the following notes:
1281321 but this gives the error: DEQUEUE_ENQBADIIMPL_ENH
1483283 but this fails also as when I perform tp unlock_EU <SID>
pf=/usr/sap/<sid>trans/bin/TP_DOMAIN_<SID>.PFL it tells me it need to be done
via SE03.
1532661 this one sents me to note 1414700 and 1366282 but the last ones
sents you back to 1483283 and note 1414700 when I want to implement it
with snote it tells me I need to use transaction SE03 for system settings.
Is there any other option to get this issue fixed? as we need to upgradesome other systems aswell with these support packages
Dump message is:
Runtime error SYNTAX_ERROR
Datum en tijd 27.06.2011 14:05:47
Korte tekst
Syntax error in program "CL_SFW_SYSTEM_SETTINGS========CP ".
Wat is er gebeurd?
Error in the ABAP Application Program
The current ABAP program "CL_SFW_RO_FACTORY=============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_SFW_SYSTEM_SETTINGS========CP " in include
"CL_SFW_SYSTEM_SETTINGS========CCIMP " in
line 215:
"Type "SFW_BF_STATE_CHANGE" is unknown"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_SFW_RO_FACTORY=============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
enanalyse
The following syntax error was found in the program
CL_SFW_SYSTEM_SETTINGS========CP :
"Type "SFW_BF_STATE_CHANGE" is unknown"
Startpunt van runtime error
Programma CL_SFW_RO_FACTORY=============CP
Include CL_SFW_RO_FACTORY=============CCIMP
Regel 1.889
Moduletype (METHOD)
Modulenaam INIT
1862 obj = obj.
1863 ENDMETHOD. "create_object
1864
1865 method get_instance_for_locals.
1866 create object reg.
1867 reg->obj_factory = factory.
1868 ENDMETHOD. "get_instance_for_locals
1869
1870 ENDCLASS. "lcl_sfw_obj_registry IMPLEMENTATION
1871
1872
1873 ----
1874 * CLASS lcl_sfw_system_settings IMPLEMENTATION
1875 ----
1876 *
1877 ----
1878 class lcl_sfw_system_settings implementation.
1879
1880 method get_instance.
1881 if ( singleton is initial ).
1882 create object singleton.
1883 singleton->init( ).
1884 endif.
1885 instance = singleton.
1886 ENDMETHOD. "get_instance
1887
1888 method init.
>>>>> me->system_settings = cl_sfw_system_settings=>get_instance( ).
1890 ENDMETHOD. "init
1891
Edited by: C. Bults on Jun 27, 2011 2:35 PM
Removed customer system nameThe following is the solution.
Symptom
When you import the Support Packages SAP_BASIS 7.00 Support Package 14 and
Support Package16 in a queue, the runtime error SYNTAX_ERROR occurs in
class CL_SFW_SYSTEM_SETTINGS (program CL_SFW_SYSTEM_SETTINGS========CP).
More Terms
Syntax error, CL_SFW_SYSTEM_SETTINGS, SPAM, SYNTAX_ERROR,
CL_SFW_SYSTEM_SETTINGS========CP
Cause and Prerequisites
This problem is due to a program error.
Solution
Option 1:
Import Support Package 14 and Support Package 16 in separate queues.
Option 2:
After the error mentioned above occurred, regenerate the enhancement spot
SFW_SWITCH_CHANGED in transaction SE18.
To do this proceed as follows:
1. Call transaction SE18.
2. Enter the enhancement spot SFW_SWITCH_CHANGED.
3. Choose "Display".
4. Choose the menu option "Enhancement Spot -> Activate".
You can now import the queue using the Support Package Manager -
ORA-00054 error when loading Oracle table using Data Services
Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Mariethe ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright. -
Transport Error when Importing appset in target system
We are receiving the below error when importing the appset TEST in Quality system.
We have include all the objects in the transport by setting UJT_TRANS_CHG to D for all TLOGO objects.
Any clues to what the problem could be?
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20110519104427
Post-processing taking place in client 100
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet TEST in Client 100 for RFC BI system
Import Step UPDPTAB completed without errors
Import Step ADMIN_DEF_UPD completed without errors
Import Step FILE_SERV_UPD completed without errors
Import Step DATA_TABLE_UPD completed without errors
After Import method for AppSet TEST finished successfully
Start of data checker messages
Missing File/Dir:
Missing File/Dir:
Dimension COSTCENTER's master is empty!
Dimension DATASRC's master is empty!
Dimension PROFITCENTER's master is empty!
BPF: Error reading master data
Invalid attribute name (ACCTYPE) in dimension (CO_ENTITY)
BPF: Validation error; Previous step has no matched step region "BR02"
BPF: Validation error; Previous step has no matched step region "BR05"
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20110519104506
Post-import methods of change/transport request BPDK900158 completed
Start of subsequent processing ... 20110519104427
End of subsequent processing... 20110519104506
Execute reports for change/transport request: BPDK900158
Reports for change/transport request BPDK900158 have been executed
Start of................ 20110519104506
End of.................. 20110519104506
Execution of programs after import (XPRA)
End date and time : 20110519104506
Ended with return code: ===> 8 <===Hi Naresh,
Thanks for reply.
We have checked driver dim and region dim(s) members. Its looks fine. Even though we are facing import error.
As per basis guidance we have executed program SE38--> UJA_DATA_CHECKER on source system appset. And observed there are several errors showing up related to BPFs & Invalid attribute name ACCTYPE for CO_ENTITY dimension.
If any of you faced similar issue. Please share your input in this regard.
Regards
Amit -
TS4020 I get "server error" when I try to use icloud on my Windows 7 pc
I get "server error" when I try to use icloud.1 on my Windows 7 pc
How do I resolve this problem?Hi doggywag,
Yes, you must have an iOS device or a Mac to create an iCloud account.
Cheers,
GB -
I'm getting an "invalid column name" error when I try to use the xmlelement() function (and the like). Is this function only available on 9i Release 2? How do I find the SQLX functions and/or load them up for use? Hopefully someone will see this as a quick question and answer it for me!
Cheers,
FishReply
Sorry. These are not loadable they are core database functionality only available with 9.2.0.1.0 and later.. -
Error when importing ST_PI 2005_1_620
Hi
I am getting error when importing ST-PI 2005_1_620 in of our system.
Here is the details on the log:
Follow-up action PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L started at 20081027152321
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Errors occurred during post-handling PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L
PRGN_AFTER_IMP_ACTGROUP_ACGR belongs to package S_PROFGEN
The errors affect the following components:
BC-SEC-USR-PFC (Authorization and Role Management)
Follow-up action PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L ended at 20081027152325
Looking for your expert advise.
ThanksInvalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Have you reviewed the role?
Regards
Juan -
ORA-907 ERROR WHEN IMPORT (COMMENT 처리)
제품 : ORACLE SERVER
작성날짜 : 1997-10-15
ORA-907 ERROR WHEN IMPORT (COMMENT 처리)
========================================
ORA-907: missing right parenthesis error
이 error 는 export 한 table 을 create 시 comment 를 사용한 경우 발생하는 ORACLE error 이다.
이는 version 8.0.4 에서 fix 되었다.
이를 해결하기 위해서는 미리 table create script 를 돌려 temp_table 을
create 하십시오.
이 때 comment 를 모두 뺀 상태로 create 한다. 또는 /* */ 는 괜찮다.
이후 INSERT INTO temp_table select * from original_table ;
을 실행합니다.
즉 original_table 을 temp_table 로 copy 한 후
drop table original_table;
rename temp_table to original_table ;
을 한 후 table을 다시 export해서 다른 machine으로 import한다.
또 이 -- 를 없애는 방법으로 아래의 C program을 이용할 수 있다.
/* file name : cnvt_dmp.c
* This program is to covert double dash remark expression
* C language stype remark expression.
#include <stdio.h>
#define MAXWORDS 4
char s_reserve[4][100]={ "NOT NULL", "CONSTRAINTS",")",","};
int dash2remark();
void main(argc,argv)
int argc;
char *argv[];
FILE f_in, f_out;
int i,j,lreserve;
int chr1,chr2;
char str1[100],str2[100],str3[100];
if( argc != 3 ) {
printf(" usage : cnvt_dmp infile.dmp outfile.dmp \n");
exit(0);
if( (f_in = fopen(argv[1],"r")) == NULL ) {
printf("could't open the source file.: %s\n",argv[1]);
exit(0);
if( (f_out = fopen(argv[2],"w")) == NULL ) {
printf("대상화일을 생성할 수가 없습니다.\n");
exit(0);
j = i = 0;
while( (chr1 = fgetc(f_in)) != EOF && !ferror(f_in)) {
if( chr1 == 'D' ) {
str1[0]='D';
fputc(chr1, f_out) ;
for(i=1;i<7;i++) {
chr1 = fgetc(f_in);
str1[i] = chr1;
fputc(chr1, f_out) ;
str1[7] = 0;
strcpy( str2,"DEFAULT");
if ( strcmp( "DEFAULT",str1) == 0 ) {
lreserve = 0;
i =0;
while( (chr2 = fgetc(f_in))!= ','){
if ( chr2 == ')') break;
str2[i] = chr2;
if ( chr2 == '-' )
lreserve = 1;
i++;
str2[i] = chr2;
str2[i+1] = 0;
printf(" lreserv => %d, str2=>%s\n",lreserve,str2);
if (lreserve) {
dash2remark(f_in,f_out,str2);
else {
for( i=0;i<strlen(str2);i++) fputc(str2,f_out);
else {
fputc(chr1, f_out );
fclose(f_out);
fclose(f_in);
return;
int dash2remark( f_in,f_out,str)
FILE f_in,f_out;
char *str;
int i,j,start_pos=-1,end_pos=-1;
for( i=0; i < strlen(str); i++ ) {
if ( str[i] == '-') {
start_pos = i;
for( j =0 ; j < MAXWORDS; j++){
if (strncmp(s_reserve[j],str+i,strlen(s_reserve[j]))== 0){
end_pos = i;
if ( start_pos > 0 ) {
for(i=0;i< (start_pos-1); i++)
fputc( str[i],f_out);
fputc('/',f_out); fputc('*',f_out);
for(i =i+2;i<(end_pos-1);i++)
fputc(str[i],f_out);
fputc('*',f_out); fputc('/',f_out);fputc(' ',f_out);
for(i;i<strlen(str);i++)
fputc(str[i],f_out);
else {
for(i=0;i<strlen(str);i++)
fputc(str[i],f_out);
return(1);
이상입니다.Hi, i think that the problem is around the rollback segments.The solution is bring other rollback segments ONLINE state, if not exist others rollbackup,then you need create the other rollback segments and bring online state.
If you need more information, you will must see the next DOC-ID on Metalink site,
Note:121971.1
Luck.
Have a good day.
Regards. -
"error when importing object" when selecting variant
Hello,
we recently migrated from 4.6 to 4.7.
For some programs, when selecting a variant, this gives a runtime error, like
Error when importing object "C131A2"
What is the cause of this? Because the values in the variant aren't valid anymore?
How can this be solved?
Thanks in advance for the helpGlad to help - you'll likely have to run it after every upgrade (for different reports).
Rob -
Org.apache.jasper.JasperException; JCO error when Importing SAP Roles in C
Hello experts,
I have installed BOXI 3.1 SP3, Integration kit SP2, BW/BI 7.0 and ECC 6.0 on Windows 2008/64bit.
My goal is to import the roles into CMS from SAP BW/BI but getting the follwoing errors:
JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc
C:\Windows\SysWOW64\sapjcorfc.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform.
java.library.path [C:\Windows\SysWOW64\;D:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\]
org.apache.jasper.JasperException
I followed the note 1292144 - JCO error when Importing SAP Roles in CMC,but unfortunately without success.
I installed SAP JCo Release 2.1.9 (64bit)
Best regards
Lutz
Edited by: Lutz Heinrich on Aug 12, 2010 4:17 PMInstall the 32bit version of the Java connector. BOBJ is 32bit so even on 64bit Windows you need the 32bit version of the Java Connector.
Regards,
Stratos
Maybe you are looking for
-
Aggregating Slowly Changing Dimension
Hi All: I have a problem with whole lot of changes in the dimension values (SCD), need to create a view or stored procedure: Two Tables within the Oracle db are joined Tbl1: Store Summary consisting of Store ID, SUM(Sales Qty) Tbl2(View): Store View
-
hai friends, I'm new to BI 7.. UP TO BW 3.5 we are using infosource .. but with out infosource also we can upload the data into data targets in BI 7.0 then ,what is the use of INFO SOURCE in BI 7.0 could u plz tell me the situation .. that
-
Disk Permission Repair failure after partially successful update
The 10.5.2 update of my PowerBook G4 stalled at 'Writing Package Receipt'. After a hard reboot, I was able to access the desktop. The About This Mac showed 10.5.2 but there were no appropriate confirmation files in Receipts/boms or in the Console Log
-
XIUSER - Service users role/profile at R/3 system
All, Currently, we have the following scenarios 1) IDoc to XI to 3rd Party System 2) 3rd Party System to XI to R/3 RFC 3) R/3 RFC to XI to 3rd Party System These scenarios are working using service user XIUSER with SAP_ALL, SAP_NEW access at R/3. I w
-
i have connected my phone to find y iphone.however,the device isnt showing up on find my iphone which is a huge problem because i need to to be able to activate and use my phone.what can i do?