Error when importing entire folder with many logs
Hi,
I came across an error when trying to import an entire folder containing 118 logs (total size 63 MB), created by and imported to Signal Express 2012 (version 6.0.0).
After about 80 of them have been imported without problem the error, shown in the attached file, is displayed.
The remaining log files can be opened one by one after SE have been restarted so there are apparently no problems with the files.
My path to the folder containing the log files are 81 characters long. I also tried a shorter path with only 9 characters but it didn't help.
Seems like it's a bug in SE. Is there a workaround?
Regards
Jocke
Solved!
Go to Solution.
Attachments:
SEimporterror.PNG 8 KB
Hi JockeR,
The error message indicates that at least one TDMS file in your log folder was not generated by SignalExpress. SignalExpress 2012 can only import TDMS files generated by SignalExpress itself.
There is a utility on ni.com which can convert the non-SignalExpress TDMS into SignalExpress TDMS. Check it out here:
http://digital.ni.com/public.nsf/allkb/3CEAF51888A117EC862573980061D585?OpenDocument
Similar Messages
-
Error when importing footage captured with I-Movie!
Hi there -
Using the latest version of I-Movie..., latest everything (new G5)
I create a new blank project - and try importing the footage I captured previously in I-Movie.
I select the project file containing the captured footage, and select "import"......and..........
I get the error message:
ERROR DURING IMPORT
The file could not be imported: The file Macintosh HD/Users/xxx/Movies/Ireland 2 cant be imported; QuickTime couldnt parse it: -43
What's that all about?
Should be do-able - no? It's the latest version of Quicktime, OSX etc.
(there are no plugins in the plugins folder for I-Movie by the way)
Pls help!Hi Florence,
just to see, if I understood correctly:
you have project A, with some captured video...
now, you have a new project B
you choose "import"
and select "project A" for importing?
no, that doesn't work with iMHD...
your imported footage of project A is hiddin in a socalled "package" (in earlier versions ofIm you could see a "media folder", containing single .dv files...) you cannot import pkg into iM......
switch to finder
ctrl click - click on project A icon
choose "show package"
select "media"
copy files into new folder
switch to iM
import from new folder.....
besides: importing from tape is ... better/best-practise... -
When importing, creates folder with wrong date
I found a curious bug in Lightroom 4.2.
If I have pictures taken after 23:00, Lightroom creates an import folder in the next day, but the dates in the files are correct.
Example:
The file's date is: 29/11/2012 23:19.
However if I hover my mouse over the image in the import dialog:
The date that appears is 30/11/2012 00:19. Here's the detail:
After you import, you get the image in the wrong import folder, but the meta on the image is correct:
I've started to notice this before, but always thought of a wrong date on my camera. Just noticed that this happens with my camera, iPhone, and any other photo that has a time after 23:00.
Do you know if there is a solution for this?
Thank you in advance,
Manuel AzevedoDoes your computer time match with your camera time? Summer-/winter-time apart?
The reason, why I am asking this: the map module auto-assumes that these times match (rather than asking you in which UTC-time zone your image time stamps should be interpreted when tagging from a gpx-track).
Could be that something similar is happening in import module if you let LR auto-create destination folders based on date-time.
I have no experience with this as I prefer to explicitely give the names of the new destination folders myself.
Cornelia -
When i use view as list in finder and open a folder with many files i cant right click with mouse without selecting or highlighting a file....i just want to right click to paste an item or create a new folder...what can i do?
Thx for that im gonna try it....but is there a way to do it without using toolbar or cmd-c...? i mean using only the mouse?why does it have to highlight the file even though i click a bit next to it....?using icon view i can right click next to the folder and i wont have a problem but with list view that i prefer using it will highlight the whole row.....and i dont find free space to right click cause i got many files
-
IPhoto "unrecognized format" error when importing
Looking for some help on a weird one here.
I recently upgraded my Intel iMac to Snow Leopard and iPhoto '09 from Leopard and iPhoto '08. Recently, I've been getting an occasional error message when trying import images that have been scanned and placed in a folder in my Pictures folder.
Scenario #1 - I tried to import a folder with 7 different PNG images in it. iPhoto started the import process and then brought up an error message stating "Unreadable Files: 6 The following files could not be imported. (The file is in an unrecognized format.)." What I don't understand is that it imported one of the images. If it recognizes one PNG file, why not all of them? All were scanned at same time with same settings. I don't believe it's PNG specific and the next instance will explain why
Scenario #2 - I tried to share some images out of my iPhoto '09 library with my wife who is running a MacBook w/ iPhoto '08. I dragged an event directly to my drop box folder. She launched iPhoto and tried to import those images. Of the 154 images (all JPG's), she kept getting an error message that 27 of them were an "unrecognized format".
As an FYI...my existing iPhoto Library has 21,250 images in it. I was once told by an Apple Store employee that they have seen many times that iPhoto starts to act weird after a photo library reaches 20,000+ images. Not sure if that's true, but thought I'd mention it.
Anyone have any ideas here? This is really frustrating because I have a lot of historical images I need to scan and import. I don't want to fight this problem through that entire process.
Thanks in advance for the help and have a great day.
JoeHey there TD....sorry for delay, but I've been too tied up lately to try the new account idea. Going to do that later and thanks again for all of your help.
With that said, thanks to all for the feedback and comments. There is some very interesting stuff going on here, but I don't believe my issue is solely related to B/W images. I believe there is some validity to that theory, but not solely. Of the original 7 images that I scanned in Image Capture, 6 of the 7 were B/W and the only one that successfully imported was a Color image. To dispute that theory, the 2nd scenario I mentioned above was all Color images that were originally imported from my Nikon D90 (RGB format). I was copying those images from one machine to another and then tried to import them when I got those images. Machine they came from was running iPhoto 09' and machine they were going to was running iPhoto 08'.
I have gone back to scanning those B/W images in Epson Scan (finally got Epson to straighten that issue out). What I noticed during this last round is if I tried to import a large number of images, I'd get an error on a few of them. My work-around has been to only import 4 or 5 images at a time. Since doing that, I have had no issues with importing any of my B/W scans.
Again, thanks to all for the help and I'll keep you posted if I notice anything else that may seem to contribute. Take care and have a great day.
Joe -
Error when creating a folder ,iviews in the portal
Dear sap gurus ,
I m facing a error when creating a Folder or an iview in my portal i'm using EP 7.0 sp11 ,The error is :
Portal Runtime Error
An exception occurred while processing a request for :
<b>iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultFolderWizard
Component Name : com.sap.portal.admin.defaultwizards.DefaultFolderWizard
SQLException is not transient, error code = 1654, sql state = 72000 Batch rolled back. Caused by java.sql.BatchUpdateException: ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:343) at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10698) at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeBatch(BasicPreparedStatement.java:263) at com.sap.sql.jdbc.oracle.Oracle10gPreparedStatement.executeBatch(Oracle10gPreparedStatement.java:100) at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1129) at com.sap.sql.jdbc.common.CommonPreparedStatement.executeBatch(CommonPreparedStatement.java:991) at com.sap.engine.services.dbpool.wrappers.StatementWrapper.executeBatch(StatementWrapper.java:270) at com.sapportals.portal.pcd.pl.AttributeHeadersTable.insert(AttributeHeadersTable.java:259) at com.sapportals.portal.pcd.pl.PlObject.save(PlObject.java:518) at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:544) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildOnPersistence(XfsContext.java:1374) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildAndNotify(XfsContext.java:1128) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChild(XfsContext.java:1087) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createSubcontext(XfsContext.java:843) at com.sapportals.portal.pcd.gl.xfs.BasicContext.createBasicSubcontext(BasicContext.java:190) at com.sapportals.portal.pcd.gl.PcdPersContext.createSubcontext(PcdPersContext.java:191) at com.sapportals.portal.pcd.gl.PcdFilterContext.filterCreateSubcontext(PcdFilterContext.java:254) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:147) at com.sapportals.portal.pcd.gl.PcdGlContext.createSubcontext(PcdGlContext.java:440) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:624) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:619) at com.sap.portal.admin.wizard.folderwizardpanes.SavePane.doAfterSubmit(SavePane.java:59) at com.sapportals.admin.wizardframework.core.WizardInstance.doPost(WizardInstance.java:356) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:174) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:99) at com.sapportals.admin.wizardframework.AbstractDynamicWizard.doContent(AbstractDynamicWizard.java:98) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) .
Exception id: 10:50_23/11/07_0005_16892850
See the details for the exception ID in the log file</b>
Thanks and Regards,
sathyaHi Sathya
The following line in your log tells you what is wrong:
ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB
This is a configuration that you or the dba people need to do. The first thing I would check is if autoextend is on/off on your tablespace PSAPSR3DB. If it's 'off' you either need to put it to 'on' or manually extend the size of your tablespace depending on how much harddrvive space you have to play with. Here is a more detailed solution on how to do it:
Oracle Error : ORA-01654: unable to extend index string.string by string in tablespace string
Cause: Failed to allocate an extent of the required number of blocks for an index segment in the tablespace indicated.
Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more files to the tablespace indicated.
Br
Göran -
Error when import BI content 3.5.3
Hi All
I have error when import BI content 3.5.3 step at Tcode 'SAINT' (file SAPKIBIFIH.car) for mySAP ERP 2004 (ECC 5.0 IDES).
The error occur in step 3/5 after enter SAINT:Passw request.
System shown information "<b>Queue SAPKLTHQ10 has not yet been confirmed</b>".
In step 4/5 sytem shown statue/remarks "<b>The Add-on installation terminated during phase PROLOGUE</b>".
I think about installation THAI font package at Tcode "SMLT" uncompleted.
I run report <b>"RSCPINST"</b> at Tcode "SE38" for editing codepage after that the system shown error message "<b>MDMP is not supported foe SAP Business Information Warehouse. Message no.RIN010"</b> Please see sap note 563975.
<b>Note:</b> When i import Thai font package "SAPKLTHQ10" using Tcode "SMLT" the system shown error message "TL1277" in define schedule job step.
Message no. TL137
Diagnosis
You want to start the post-import methods for special texts (calendar texts, terminology, and glossary) for language Thai.
Before this can happen, the system checks whether this server is prepared for this language. The system also checks whether the language environment can be switched dynamically on this server (see ABAP command SET LOCAL LANGUAGE).
System response
The system established that the language environment cannot be switched to language Thai.
The language transport is stopped at this point.
Procedure
The switch of the language environment may fail for the following reasons:
1. The database codepage is not up-to-date.
2. The codepage information for language Thai is not up-to-date.
3. Locales for language Thai do not exist, or are invalid, at the operating system level.
4. The profile parameter zcsa/installed_languages has to be adjusted.
If an error occurs, proceed as follows:
1. Find out the name of the server on which the language import job ran. Log on to this server.
2. Check the language configuration using report RSCPINST. Solve the reported problem there.
If your system consists of multiple application servers and not all of them have authorization for language Thai, continue the language import on a server that has authorization for language Thai.
plaese help me to solve this problem.
thank a lot for all solutions.
Mooping.This is a long story that you write, but your problem seems just that you must "Confirm the queue". Is that correct?
Without this step no further Support Packages can be inserted into the system. Confirming the queue is done by one of the buttons in the SPAM transaction. Just put the mouse on the buttons and read the quick help to differentiate between the buttons.
I have never had a problem like this but I think it can happen if, together with the new BI version you also include one or more support packs. This happens automatically if these packages are available, so you may not even have noticed it. -
When loading a page with many hires images, Firefox becomes really slow and scrolling becomes jumpy then eventually becomes completely unresponsive. Unusual high memory usage of up to 2gigs just for firefox when loading these pages. This was never a problem with v3.6.
I encountered the same type of problem. Firefox running terribly slowly and slowing down my entire machine (Core i5 with 256GB SSD). Searching the forums, I found a couple of things about troubleshooting performance issues, one of which was to use '''hardware acceleration''', that is on by default. It was turned on on my PC, '''so I tried deactivating it, and it worked!'''
So doing the exact opposite as Mozilla support said solved the problem. It is really a pain now to work with Firefox. I'm using it because I have no choice, but I'd recommend IE and Chrome over Firefox... Whatever, the market will decide once Firefox has become to crappy... -
Transport Error when Importing appset in target system
We are receiving the below error when importing the appset TEST in Quality system.
We have include all the objects in the transport by setting UJT_TRANS_CHG to D for all TLOGO objects.
Any clues to what the problem could be?
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20110519104427
Post-processing taking place in client 100
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet TEST in Client 100 for RFC BI system
Import Step UPDPTAB completed without errors
Import Step ADMIN_DEF_UPD completed without errors
Import Step FILE_SERV_UPD completed without errors
Import Step DATA_TABLE_UPD completed without errors
After Import method for AppSet TEST finished successfully
Start of data checker messages
Missing File/Dir:
Missing File/Dir:
Dimension COSTCENTER's master is empty!
Dimension DATASRC's master is empty!
Dimension PROFITCENTER's master is empty!
BPF: Error reading master data
Invalid attribute name (ACCTYPE) in dimension (CO_ENTITY)
BPF: Validation error; Previous step has no matched step region "BR02"
BPF: Validation error; Previous step has no matched step region "BR05"
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20110519104506
Post-import methods of change/transport request BPDK900158 completed
Start of subsequent processing ... 20110519104427
End of subsequent processing... 20110519104506
Execute reports for change/transport request: BPDK900158
Reports for change/transport request BPDK900158 have been executed
Start of................ 20110519104506
End of.................. 20110519104506
Execution of programs after import (XPRA)
End date and time : 20110519104506
Ended with return code: ===> 8 <===Hi Naresh,
Thanks for reply.
We have checked driver dim and region dim(s) members. Its looks fine. Even though we are facing import error.
As per basis guidance we have executed program SE38--> UJA_DATA_CHECKER on source system appset. And observed there are several errors showing up related to BPFs & Invalid attribute name ACCTYPE for CO_ENTITY dimension.
If any of you faced similar issue. Please share your input in this regard.
Regards
Amit -
Error when importing CO Hierarchies from R/3 DEV to R/3 QAS
Dear SDN,
I am getting the following error when importing Cost center and cost element hierarchies from R/3 DEV to R/3 QAS...
Object OSOA 0COSTCENTER_0101_HIER has not yet been imported successfully
Object OSOA 0COSTELMNT_0102_HIER has not yet been imported successfully
Ended with Return code ===8...
But The two hierarchies were available in R/3 QAS and also i am able to utilise..
My doubt is if i transport these hierarchies from R/3 QAS to R/3 Production any major issues...
Now i want to test a data in BW DEV from R/3 Production data...
So, I am planning to transport These hierarchies from R/3 QAS to R/3 PROD...
Here we do not have BW QAS...So, getting data from R/3Production to BW DEV and testing...
After testing Directly use in BW Production...
So, Please suggest me why when importing these hierarchies errors occuring???
Help will be greatly appreciated with points...
Thanks in advance...Hi Venkat,
Please go through the following threads...
Hierarchy Transports
Transporting cost center and profit center standard hierarchies
/community [original link is broken]://Transporting a hierarchy
Transport Hierarchy
Khaja -
Error when importing ST_PI 2005_1_620
Hi
I am getting error when importing ST-PI 2005_1_620 in of our system.
Here is the details on the log:
Follow-up action PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L started at 20081027152321
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Errors occurred during post-handling PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L
PRGN_AFTER_IMP_ACTGROUP_ACGR belongs to package S_PROFGEN
The errors affect the following components:
BC-SEC-USR-PFC (Authorization and Role Management)
Follow-up action PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L ended at 20081027152325
Looking for your expert advise.
ThanksInvalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Have you reviewed the role?
Regards
Juan -
Error when importing from Excel in SAP
Hello experts,
My gets error when importing price list using the import form Xl menu :
(-1200) DBMCconnBase::EndTransaction SQLEndTran sqlState 08S01, nativeErr: 0, errText:[Microsoft][SQL Native Client] Communication link failure
This happens only when connected with SAP Client, it never happens when connected in terminal server directly on SAP server.
Server 2003, MSSQL 2005 SP2
SAP 2007 Sp01 PL08 HF01
This has always been working before, it has stopped working when he changed the motherboard 3 weeks ago. Nothing else have changed.
Any idea where to look at?
Thanks!
Chrishello Gordon,
Thanks for your answer. that would have probaly fix the issue
my techs fixed the issue by doing the 2 following thinks, i don't know if only one of them would have fix it.
1. in the boot.ini file there was a /3G in the end, restricting the memory to 1G for the OS. The tech deleted it.
2. in management studio, the technician changed the memory reserved for sql from 9/12 to 14/16Gb
there was probably not enough RAM available for the import.
since that change it works well.
Thanks again!
Christophe -
CL_SFW_SYSTEM_SETTINGS error when importing SPs
When we want to import the support packages SAP_BASIS, SAP_ABA, SAP_BW,
PI-BASIS untill packages level 7 ( we come from level 4) and the HR
untill package level 26 we run into the short text error when importing
the basis, aba, pi-basis and bw package.
I tried to use the following notes:
1281321 but this gives the error: DEQUEUE_ENQBADIIMPL_ENH
1483283 but this fails also as when I perform tp unlock_EU <SID>
pf=/usr/sap/<sid>trans/bin/TP_DOMAIN_<SID>.PFL it tells me it need to be done
via SE03.
1532661 this one sents me to note 1414700 and 1366282 but the last ones
sents you back to 1483283 and note 1414700 when I want to implement it
with snote it tells me I need to use transaction SE03 for system settings.
Is there any other option to get this issue fixed? as we need to upgradesome other systems aswell with these support packages
Dump message is:
Runtime error SYNTAX_ERROR
Datum en tijd 27.06.2011 14:05:47
Korte tekst
Syntax error in program "CL_SFW_SYSTEM_SETTINGS========CP ".
Wat is er gebeurd?
Error in the ABAP Application Program
The current ABAP program "CL_SFW_RO_FACTORY=============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
The following syntax error occurred in program
"CL_SFW_SYSTEM_SETTINGS========CP " in include
"CL_SFW_SYSTEM_SETTINGS========CCIMP " in
line 215:
"Type "SFW_BF_STATE_CHANGE" is unknown"
The include has been created and last changed by:
Created by: "SAP "
Last changed by: "SAP "
Error in the ABAP Application Program
The current ABAP program "CL_SFW_RO_FACTORY=============CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
enanalyse
The following syntax error was found in the program
CL_SFW_SYSTEM_SETTINGS========CP :
"Type "SFW_BF_STATE_CHANGE" is unknown"
Startpunt van runtime error
Programma CL_SFW_RO_FACTORY=============CP
Include CL_SFW_RO_FACTORY=============CCIMP
Regel 1.889
Moduletype (METHOD)
Modulenaam INIT
1862 obj = obj.
1863 ENDMETHOD. "create_object
1864
1865 method get_instance_for_locals.
1866 create object reg.
1867 reg->obj_factory = factory.
1868 ENDMETHOD. "get_instance_for_locals
1869
1870 ENDCLASS. "lcl_sfw_obj_registry IMPLEMENTATION
1871
1872
1873 ----
1874 * CLASS lcl_sfw_system_settings IMPLEMENTATION
1875 ----
1876 *
1877 ----
1878 class lcl_sfw_system_settings implementation.
1879
1880 method get_instance.
1881 if ( singleton is initial ).
1882 create object singleton.
1883 singleton->init( ).
1884 endif.
1885 instance = singleton.
1886 ENDMETHOD. "get_instance
1887
1888 method init.
>>>>> me->system_settings = cl_sfw_system_settings=>get_instance( ).
1890 ENDMETHOD. "init
1891
Edited by: C. Bults on Jun 27, 2011 2:35 PM
Removed customer system nameThe following is the solution.
Symptom
When you import the Support Packages SAP_BASIS 7.00 Support Package 14 and
Support Package16 in a queue, the runtime error SYNTAX_ERROR occurs in
class CL_SFW_SYSTEM_SETTINGS (program CL_SFW_SYSTEM_SETTINGS========CP).
More Terms
Syntax error, CL_SFW_SYSTEM_SETTINGS, SPAM, SYNTAX_ERROR,
CL_SFW_SYSTEM_SETTINGS========CP
Cause and Prerequisites
This problem is due to a program error.
Solution
Option 1:
Import Support Package 14 and Support Package 16 in separate queues.
Option 2:
After the error mentioned above occurred, regenerate the enhancement spot
SFW_SWITCH_CHANGED in transaction SE18.
To do this proceed as follows:
1. Call transaction SE18.
2. Enter the enhancement spot SFW_SWITCH_CHANGED.
3. Choose "Display".
4. Choose the menu option "Enhancement Spot -> Activate".
You can now import the queue using the Support Package Manager -
Error when importing object P_lis
Hello Experts ,
I have a task assigned to me where i have to write a program to get all the reports and their variants( variants without space and non obselete variants)
When i am trying to access the variant SDCAS_ADRSEL , I am getting a dump "Error when importing object P_lis ". It has got only one variant JOJO1 in the vari table . Please help me out with this.Hi Aditya,
You might need to provide a few more details on the dump.
I.e.
Exact details of the error that occured.
Where the error occurred
You can grab these out of the dump in ST22. That should help people out, to help understand what you are doing, as it's not really clear from your current description.
Cheers,
Katan -
Recover an entire folder with every recent file?
Hi,
Need to have an exact copy of a department drive from Friday. The other drive is intact so there is no "DR" scenario.
If I select the folder and choose show all recovery points, then select Friday. Does that Recover the entire folder with the most current backup of every file leading up to Friday, or just the files backed up Friday?
If not is there a way to do a point in time restore? Say like my file server dies and I need to restore every single file to the most current version that I have a copy of?
Thanks.Hi,
Every recovery point represents a full backup of the data source you are protecting, so it will contain all files even if they have not been updated for several days. After a full restore of that folder, the restored files will be of the exact
version they were at the point in time that the recovery point was taken.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT]
This posting is provided "AS IS" with no warranties, and confers no rights.
Maybe you are looking for
-
Hi guys, I cannot get my Apple TV to connect to the only available wifi connection in my building. Basically when I log on to it with other devices you have to type in a password (like all wifi connections) but then it opens a browser window with a u
-
Hello, I'm looking at how to downgrade my OS from windows 8 (pre-packaged from PCCASEGEAR) to windows 7, I have re-initialized my 2x 64gb SSD's RAID 0 setup when I go to install windows it complains that the BIOS doesn't allow booting from the drive.
-
How to debug or how to find where the problem...
Hi, I didn't getting this proc where's getting the problem. In which proc is raising the error and where's the problme. Please any body can help me getting out of from this error.. PROCEDURE Ysp_Payproc(udYrmonth IN Y_EMP_SAL_DETAILS.Yes_Year_Month%T
-
We are trying to build a formula in HFM v11.1.1 which will encompass the days in month. The days will be static ie: Jan=31, Feb=28, March=31. Has anyone used a similar formula?
-
Uploading custom pages to iPhoto photo books
I am trying to upload a custom page with photos and text to my iPhoto photo book. I am a digital scrapbooker. But I need to know the exact size with bleed to make sure that the text and photos appear the way I have designed. Is it possible to find o