Error when importing ESS components into PRD

Hi All,
I am importing ESS components into PRD in NWDI environment. One component goes through with status 'Import finished' but other components give status
'Outdated'. I see the error log and it is empty. What does 'Outdated' status mean.
Thanks,
Tom

try this... see if it helps
http://help.sap.com/saphelp_nw70/helpdata/en/2c/5f7ecd8ddc454ca86ff6e53919b0d1/frameset.htm
T.

Similar Messages

Error when importing SW comps into IR

When I tried to import SW comps into IR, it is giving an error
"Unable to read SWC versions from SLD "<host>:<prot>"
Any directions, thoughts...etc...
-Naveen.

Hi everyone,
Thanks for ur replies.

Properties of RFC destination SAPSLDAPI
RFC host:
%%RFCSERVER%%
program id: SAPSLDAPI_DP1
gateway host:
SVR-SAP03-DEV
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
RFC ping was successful
SLD server access settings:
host name: SVR-SAP03-DEV
port number: 50100
user : PIAPPLUSER
Use transaction SLDAPICUST if you wish to maintain the SLD server access data
Launching the SLD GUI in a separate browser window...
=> Verify in the browser GUI that the SLD is in a healthy running state!
Calling function LCR_LIST_BUSINESS_SYSTEMS
Retrieving data from the SLD server...
Function call returned exception code 4
=> Check whether the SLD is running!
Summary: Connection to SLD does not work
=> Check SLD function and configurations
Now checking access to the XI Profile
Properties of RFC destination LCRSAPRFC
RFC host:
%%RFCSERVER%%
program id: LCRSAPRFC_DP1
gateway host:
SVR-SAP03-DEV
gateway service: sapgw01
Testing the RFC connection to the SLD java client...
RFC ping was successful
Calling function EXCHANGE_PROFILE_GET_PARAMETER
Retrieving data from the XI Profile...
Function call terminated sucessfully
Retrieved value of
section = Connections
parameter = com.sap.aii.ib.server.connect.webas.r3.ashost
-> value =
Summary: Connection to the XI Profile works correctly

Error when building ESS components within NWDI for NW2004s

Hi I am trying to import thr ESS version 100 source code into the JDI.
I get the following errors
An internal server error occurred. Please refer to SAP note 774339 for more details on how to analyse the error condition.
Unclosed Statement detected when suspending session: com.tssap.dtr.pvc.basics.transaction.PreparedStatementReleasingConnection[insert into PVC_VSetElement( versionID , versionSetID , objectID , modOperation , isImported , deactivated , creationTime , lastModified , autoversion , activationSeqNo ) values (?, ?, ?, ?, ?, ?, ?, ?, ?, ?)]
Thanks
Theo

In case you have not solved this. This seems a problem with your DB. Try to redeploy your dbschema. I had a similar problem and this solved it for me.
Regards,
Christophe

Error when importing music CD into iTunes

I am trying to import an audio CD to iTunes. I have a (newish) macbook air using OSX 10.9.3, so I am using a Samsung Portable DVD Writer (SE-208).
iTunes can play the music file from the cd, but when I try to import a track/cd I get the following error message: "Error occurred while converting the file <song name>. The required disk cannot be found."
I have tried importing in different file formats, but I get the same error message each time. Please help!

Since your error message suggests that iTunes is finding the music to be ripped, I suspect that it isn’t finding the folder the music is supposed to be stored in. Open iTunes preferences and select the Advanced tab. If you store your music on your computer in the iTunes folder you should see: /Volumes/Music/iTunes in the first box labeled iTunes Media Folder Location. If you see something else, or if you store the music on an external drive, click on the Change button and select the folder where you want the ripped files to be placed.

Error when importing UTF8 Files into SOD

I was trying to import a UTF8 csv file into SOD (Lead Object) and I,m running into wierd errors only for some of the records. Mentioned below is the error: "An unexpected error occurred during the import of the following row".
It is basically messing the sequence of columns in the row.
Please advise.

Send me your CSV file and log file to [email protected] and I will take look at it.
Edited by: Bob B on Oct 1, 2008 9:17 AM

Windows error when importing Essbase cube into OBIEE

Hi all:
This question is perhaps more relevant to the OBIEE forum, but I put it up there a few days ago and got no response. So now I'm hoping to get some help on this side of BI land!
My issue is that I'm trying to import an Essbase cube (system 11) into BI Admin Tool, but whenver I go to "Import from multidimensional" and hit "OK" after entering in the essbase server name and log/pwd, the BI Admin tool crashes. I get no error msg except for a couple of errors I see in the Windows event log:
1. Faulting application path: C:\OracleBI\server\Bin\AdminTool.exe
Faulting module path: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin\essapinu.dll
2. Faulting application path: C:\OracleBI\server\Bin\AdminTool.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
I'm running a standalone OBIEE 10.1.3.4 on my local machine (Windows 7 32-bit) and the Essbase Server is on a separate Windows 2008 machine. I can ping between machines and all ports are open on the Essbase machine, so I don't think this is a network related issue. Also, my OBI RPD is working fine in all other respects. I have other data sources working in there with no trouble. My Essbase server is also working fine. I also tried to do this in a new RPD in case the old one was corrupted, but get the same issue.
Any help would be greatly appreciated.
thanks,
Akshay

Akshay,
You must have the Essbase client installed on the same machine where your OBI Administration Tool is installed. This should get you past the error that you are receiving and should fix your problem. Since you are running 32-bit just download the 32-bit Essbase client from Oracle. You will most likely need to run download the required files to install the Essbase client and with Hyperion 11x you should be familiar with that required software matrix since you have Essbase running on a seperate server already.
But now looking at your post I see that you state that one of the paths in your error is C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin\essapinu.dll. The path C:\Oracle\Middleware is usually seen in Hyperion EPM 11.1.2. So, are you running Essbase 11.1.2 and OBIEE 10g or are you running OBIEE 11g? You'll need to specificy as OBIEE 11g can only interface with Hyperion Essbase 11.1.2 at present. And if I recall correctly the 11.1.2 Essbase client does not work with OBIEE 10g. Please clarify on these points.
Let me know if that helps fix your issue. If that doesn't fix it post back here and we see if we can keep you going forward.
Don't forget to reward points.
Cheers,
Christian
http://www.artofbi.com

Error when importing songs/effects into GarageBand

Whenever I try to import a song or iLife sound effect into garageband, it comes up with an error reading.
Any ideas?

this may sound silly, since you've done these things, but in order try this
close the GB project first, then quit GB
log out of your account
log back in, and repair permissions again
launch GB, and create another new project
after that, i'm not sure what else to suggest at the moment. i can't quite figure out what directory GB can't find if it's not the project itself, or a general permissions problem.

Gettine error when importing .docx form into LiveCycle

I'm getting an error in LiveCycle Designer 8.21 when I attempt to open a form that a co-worker created as a .docx form with text fields and select boxes.
Every time I get the alert that "Word (version XP or onwards) could not be found on the machine". Because the Office suite is loaded from our servers as shared software, is this causing LiveCycle to error? There really isn't any way to install Office so that the program resides primarily on the hard drive.
Need to figure this out, as more and more people are creating forms in Word and we want to get on top of this and keep them compatible with the LiveCycle forms that we create and manage.
Any ideas?

Set this registry entry.
[HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Office\12.0\Word\InstallRoot]
"Path"="C:\\Program Files (x86)\\Microsoft Office\\Office14\\"

Error when importing ESS SCA

Hello,
I'm having this error at the Repository Step Import, all the imports (JEE, Buildt, etc etc) were imported succesfulli, but this is getting stoped at this point and I don't know why.
I'll appreciate a lot your help,
Regards,
Fatal Exception:com.sap.cms.tcs.interfaces.exceptions.TCSCommunicationException: communication error: VcmFailureException received: Could not upload propagatable segment contents
Request path: wp/aa7dab6589b511db9e990030057116fe/e49bc798f51e11dbcf1b369bc66fe44b
Error Condition: . Response status = 409 (Conflict):communication error: VcmFailureException received: Could not upload propagatable segment contents

Hi Maria,
this problem can normally be resolved by increasing the number of connections that your default DataSource can have to 100.
If you don't know how to configure this take a look here:
http://help.sap.com/saphelp_nw2004s/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/frameset.htm > click on the Manage Connection Pools link...
Once you increase Max Connections to 100 you will have to restart the cluster for it to take effect. Then try the import again.
Good luck!
Jeff

Error when importing psd files into Premiere Pro

I am using Adobe Premiere Pro CS4 and Photoshop CS4. Whenever I attempt to import a psd file I get this error message: "File format not supported". I have tested it with different file sizes and properties. My files are RGB and 8 bits/channel. Is there any way to resolve this problem? I am also using Adobe After Effects and importing psd files works great with it.
Thanks

Welcome to the forum.
The RGB and 8-bit take care of two possible causes, so thanks for getting those out of the way early on.
Does the PSD file contain Layers? Are any of them mostly Transparent, with just a few pixels, such as a small logo? Those have created issues.
What is the exact version of CS4, that you are running? Seems that there WAS an issue with PSD's in an earlier version, and that a later update fixed that.
There is another element with PSD's, that has caused issues, but my feeble mind is suddenly blank on what that was about. Seems that Colin Brougham commented on it not that long ago. I'll see if I can drege up one of those threads, but you might aslo want to do a Search on "PrPro" and "PSD," though the forum Search might still be broken. Maybe Google, and also look for replies from Colin. I'll do the same too. IIRC, one had to Open the offending PSD in PS, and just do a Save_As with a short file name, and a short Path (not buried deeply inside a sub-folder structure), and all was good, but do not recall any other details at the moment. I would also eliminate any spaces in the new file name, just to eliminate any issue there - use the _ like in the old DOS days, though do not think that one had to adhere to the old 8.3 structure.
Good luck,
Hunt

Error when importing fileuploader class into forms 9.0.4

Hi all,
I have a problem when I try to import the fileuploader class that is included with the oracle forms demos. I get the following message:
Importing Class oracle.forms.demos.uploadclient.FileUploader...
...exception: java.lang.NoClassDefFoundError: oracle/forms/ui/VBean
How I specify the environment variable CLASSPATH so the class can be imported?.

Hi,
make sure that the f90all.jar file in the forms90/java directory is referenced in the Forms90_Builder_Classpath registry variable before starting the Forms Developer
Frank

Error while importing MS project into cProject

Hi
I am getting the below error while importing MS project client file or XML file into cProjects.
dpr_shared087
Logon language becomes original language
Message no. DPR_SHARED087
Diagnosis
The logon language is defined as a possible text language in Customizing for Collaboration Projects under Specify Text Languages. Therefore, it is valid.
System Response
The logon language becomes the original language of the new object that was created.
Kindly suggest what configuration data if any is missing.
Regards
Srikrishna

Hi
I am getting the below error while importing MS project into cProject.
Error occurred when importing from Microsoft Project
Message no. DPR_UI_BSP116
Diagnosis
When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
The XML string contains errors because the values from Microsoft Project were transferred without verification.
Procedure for System Administration
Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
Kindly suggest, if the below steps for importing MS project is ok or not?
step 1: Create project in MS project with tasks.
step 2: Maintain maping fields of MSP in cProject configurat
step 3: Import MPP file into cProject using "Import" button.
step 4: I am getting the above error while importing the MPP file.
Regards
Srikrishna

Transport Error when Importing appset in target system

We are receiving the below error when importing the appset TEST in Quality system.
We have include all the objects in the transport by setting UJT_TRANS_CHG to D for all TLOGO objects.
Any clues to what the problem could be?
Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20110519104427
Post-processing taking place in client 100
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
Start After Import for AppSet TEST in Client 100 for RFC BI system
Import Step UPDPTAB completed without errors
Import Step ADMIN_DEF_UPD completed without errors
Import Step FILE_SERV_UPD completed without errors
Import Step DATA_TABLE_UPD completed without errors
After Import method for AppSet TEST finished successfully
Start of data checker messages
Missing File/Dir:
Missing File/Dir:
Dimension COSTCENTER's master is empty!
Dimension DATASRC's master is empty!
Dimension PROFITCENTER's master is empty!
BPF: Error reading master data
Invalid attribute name (ACCTYPE) in dimension (CO_ENTITY)
BPF: Validation error; Previous step has no matched step region "BR02"
BPF: Validation error; Previous step has no matched step region "BR05"
Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
Nothing to delete.
End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
RS_AFTER_IMPORT belongs to package RS
The errors affect the following components:
 BW-WHM (Warehouse Management)
Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20110519104506
Post-import methods of change/transport request BPDK900158 completed
 Start of subsequent processing ... 20110519104427
 End of subsequent processing... 20110519104506
Execute reports for change/transport request: BPDK900158
Reports for change/transport request BPDK900158 have been executed
 Start of................ 20110519104506
 End of.................. 20110519104506
Execution of programs after import (XPRA)
End date and time : 20110519104506
Ended with return code: ===> 8 <===

Hi Naresh,
Thanks for reply.
We have checked driver dim and region dim(s) members. Its looks fine. Even though we are facing import error.
As per basis guidance we have executed program SE38--> UJA_DATA_CHECKER on source system appset. And observed there are several errors showing up related to BPFs & Invalid attribute name ACCTYPE for CO_ENTITY dimension.
If any of you faced similar issue. Please share your input in this regard.
Regards
Amit

Error when import BI content 3.5.3

Hi All
I have error when import BI content 3.5.3 step at Tcode 'SAINT' (file SAPKIBIFIH.car) for mySAP ERP 2004 (ECC 5.0 IDES).
The error occur in step 3/5 after enter SAINT:Passw request.
System shown information "Queue SAPKLTHQ10 has not yet been confirmed".
In step 4/5 sytem shown statue/remarks "The Add-on installation terminated during phase PROLOGUE".
I think about installation THAI font package at Tcode "SMLT" uncompleted.
I run report "RSCPINST" at Tcode "SE38" for editing codepage after that the system shown error message "MDMP is not supported foe SAP Business Information Warehouse. Message no.RIN010" Please see sap note 563975.
Note: When i import Thai font package "SAPKLTHQ10" using Tcode "SMLT" the system shown error message "TL1277" in define schedule job step.
Message no. TL137
Diagnosis
You want to start the post-import methods for special texts (calendar texts, terminology, and glossary) for language Thai.
Before this can happen, the system checks whether this server is prepared for this language. The system also checks whether the language environment can be switched dynamically on this server (see ABAP command SET LOCAL LANGUAGE).
System response
The system established that the language environment cannot be switched to language Thai.
The language transport is stopped at this point.
Procedure
The switch of the language environment may fail for the following reasons:
1. The database codepage is not up-to-date.
2. The codepage information for language Thai is not up-to-date.
3. Locales for language Thai do not exist, or are invalid, at the operating system level.
4. The profile parameter zcsa/installed_languages has to be adjusted.
If an error occurs, proceed as follows:
1. Find out the name of the server on which the language import job ran. Log on to this server.
2. Check the language configuration using report RSCPINST. Solve the reported problem there.
If your system consists of multiple application servers and not all of them have authorization for language Thai, continue the language import on a server that has authorization for language Thai.
plaese help me to solve this problem.
thank a lot for all solutions.
Mooping.

This is a long story that you write, but your problem seems just that you must "Confirm the queue". Is that correct?
Without this step no further Support Packages can be inserted into the system. Confirming the queue is done by one of the buttons in the SPAM transaction. Just put the mouse on the buttons and read the quick help to differentiate between the buttons.
I have never had a problem like this but I think it can happen if, together with the new BI version you also include one or more support packs. This happens automatically if these packages are available, so you may not even have noticed it.

Error when importing ST_PI 2005_1_620

Hi
I am getting error when importing ST-PI 2005_1_620 in of our system.
Here is the details on the log:
Follow-up action PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L started at 20081027152321
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Errors occurred during post-handling PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L
PRGN_AFTER_IMP_ACTGROUP_ACGR belongs to package S_PROFGEN
The errors affect the following components:
BC-SEC-USR-PFC (Authorization and Role Management)
Follow-up action PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L ended at 20081027152325
Looking for your expert advise.
Thanks

Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
Have you reviewed the role?
Regards
Juan

Error when importing ESS components into PRD

Similar Messages

Maybe you are looking for