Error when importing language to repository

Siebel on Linux and DB2 as database
The siebel deployment was done with ENU as primary language. DEU as additional.
To get the DEU seed data I was running install_lang for DEU for Siebel Database. That was successfull.
Then I try to run import of deu language to the repository. Now I am getting the following error:
2011-09-27 14:15:12     SQL Statement:
insert into siebel.S_SYM_STR_INTL (APP_CD,
COMMENTS,
CONFLICT_ID,
CREATED,
CREATED_BY,
DB_LAST_UPD,
DB_LAST_UPD_SRC,
INACTIVE_FLG,
LANG_CD,
LAST_UPD,
LAST_UPD_BY,
MODIFICATION_NUM,
NAME,
REDO_FLG,
REPOSITORY_ID,
ROW_ID,
SSE_FLG,
SST_FLG,
SSV_FLG,
STRING_VALUE,
SYM_STR_ID,
SYM_STR_KEY) values (?, ?, ?, ?, ?, current timestamp - current timezone, 'repimexp', ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
2011-09-27 14:15:12     [IBM][CLI Driver][DB2/LINUX] SQL0302N The value of a host variable in the EXECUTE or OPEN statement is out of range for its corresponding use. SQLSTATE=22001
2011-09-27 14:15:12     
2011-09-27 14:15:12     22001: [IBM][CLI Driver][DB2/LINUX] SQL0302N The value of a host variable in the EXECUTE or OPEN statement is out of range for its corresponding use. SQLSTATE=22001
2011-09-27 14:15:12     
2011-09-27 14:15:12     Error inserting row ROW_ID = 1-11Y-G0G, PARENT_ID = 1-1-XYGB.
2011-09-27 14:15:12     Failed to insert data into INTL tables
2011-09-27 14:15:12     Error in doINTLImport.
2011-09-27 14:15:12     Error in Main function...
2011-09-27 14:15:12     Elapsed time: 1 min 39 sec.
2011-09-27 14:15:12     (logapi.cpp (184) err=1 sys=0) SBL-GEN-00001: (logapi.cpp: 184) error code = 1, system error = 0, msg1 = (null), msg2 = (null), msg3 = (null), msg4 = (null)
Can someone help?

Hi,
I assume you are using 8.1.1, if it is correct please check if ODBC is ok per section below:
http://download.oracle.com/docs/cd/E14004_01/books/SiebInstUNIX/SiebInstCOM_ConfigSES26.html#wp2227262
Also make sure you are running a supported db2 version and fixpack per SRSP guide:
http://download.oracle.com/docs/cd/E11886_01/V8/CORE/SRSP_81/SRSP_81_DBPlatforms2.html#wp1019620
Hope it helps,
Wilson

Similar Messages

  • Error when import BI content 3.5.3

    Hi All
    I have error when import BI content 3.5.3 step at Tcode 'SAINT' (file SAPKIBIFIH.car) for mySAP ERP 2004 (ECC 5.0 IDES).
    The error occur in step 3/5 after enter SAINT:Passw request.
    System shown information "<b>Queue SAPKLTHQ10 has not yet been confirmed</b>".
    In step 4/5 sytem shown statue/remarks "<b>The Add-on installation terminated during phase PROLOGUE</b>".
    I think about installation THAI font package at Tcode "SMLT" uncompleted.
    I run report <b>"RSCPINST"</b> at Tcode "SE38" for editing codepage after that the system shown error message "<b>MDMP is not supported foe SAP Business Information Warehouse. Message no.RIN010"</b> Please see sap note 563975.
    <b>Note:</b> When  i import Thai font package "SAPKLTHQ10" using Tcode "SMLT" the system shown error message "TL1277" in define schedule job step.
    Message no. TL137
    Diagnosis
    You want to start the post-import methods for special texts (calendar texts, terminology, and glossary) for language Thai.
    Before this can happen, the system checks whether this server is prepared for this language. The system also checks whether the language environment can be switched dynamically on this server (see ABAP command SET LOCAL LANGUAGE).
    System response
    The system established that the language environment cannot be switched to language Thai.
    The language transport is stopped at this point.
    Procedure
    The switch of the language environment may fail for the following reasons:
    1. The database codepage is not up-to-date.
    2. The codepage information for language Thai is not up-to-date.
    3. Locales for language Thai do not exist, or are invalid, at the operating system level.
    4. The profile parameter zcsa/installed_languages has to be adjusted.
    If an error occurs, proceed as follows:
    1. Find out the name of the server on which the language import job ran. Log on to this server.
    2. Check the language configuration using report RSCPINST. Solve the reported problem there.
    If your system consists of multiple application servers and not all of them have authorization for language Thai, continue the language import on a server that has authorization for language Thai.
    plaese help me to solve this problem.
    thank a lot for all solutions.
    Mooping.

    This is a long story that you write, but your problem seems just that you must "Confirm the queue". Is that correct?
    Without this step no further Support Packages can be inserted into the system. Confirming the queue is done by one of the buttons in the SPAM transaction. Just put the mouse on the buttons and read the quick help to differentiate between the buttons.
    I have never had a problem like this but I think it can happen if, together with the new BI version you also include one or more support packs. This happens automatically if these packages are available, so you may not even have noticed it.

  • ORA-907 ERROR WHEN IMPORT (COMMENT 처리)

    제품 : ORACLE SERVER
    작성날짜 : 1997-10-15
    ORA-907 ERROR WHEN IMPORT (COMMENT 처리)
    ========================================
    ORA-907: missing right parenthesis error
    이 error 는 export 한 table 을 create 시 comment 를 사용한 경우 발생하는 ORACLE error 이다.
    이는 version 8.0.4 에서 fix 되었다.
    이를 해결하기 위해서는 미리 table create script 를 돌려 temp_table 을
    create 하십시오.
    이 때 comment 를 모두 뺀 상태로 create 한다. 또는 /* */ 는 괜찮다.
    이후 INSERT INTO temp_table select * from original_table ;
    을 실행합니다.
    즉 original_table 을 temp_table 로 copy 한 후
    drop table original_table;
    rename temp_table to original_table ;
    을 한 후 table을 다시 export해서 다른 machine으로 import한다.
    또 이 -- 를 없애는 방법으로 아래의 C program을 이용할 수 있다.
    /* file name : cnvt_dmp.c
    * This program is to covert double dash remark expression
    * C language stype remark expression.
    #include <stdio.h>
    #define MAXWORDS 4
    char s_reserve[4][100]={ "NOT NULL", "CONSTRAINTS",")",","};
    int dash2remark();
    void main(argc,argv)
    int argc;
    char *argv[];
    FILE f_in, f_out;
    int i,j,lreserve;
    int chr1,chr2;
    char str1[100],str2[100],str3[100];
    if( argc != 3 ) {
    printf(" usage : cnvt_dmp infile.dmp outfile.dmp \n");
    exit(0);
    if( (f_in = fopen(argv[1],"r")) == NULL ) {
    printf("could't open the source file.: %s\n",argv[1]);
    exit(0);
    if( (f_out = fopen(argv[2],"w")) == NULL ) {
    printf("대상화일을 생성할 수가 없습니다.\n");
    exit(0);
    j = i = 0;
    while( (chr1 = fgetc(f_in)) != EOF && !ferror(f_in)) {
    if( chr1 == 'D' ) {
    str1[0]='D';
    fputc(chr1, f_out) ;
    for(i=1;i<7;i++) {
    chr1 = fgetc(f_in);
    str1[i] = chr1;
    fputc(chr1, f_out) ;
    str1[7] = 0;
    strcpy( str2,"DEFAULT");
    if ( strcmp( "DEFAULT",str1) == 0 ) {
    lreserve = 0;
              i =0;
    while( (chr2 = fgetc(f_in))!= ','){
    if ( chr2 == ')') break;
    str2[i] = chr2;
    if ( chr2 == '-' )
    lreserve = 1;
              i++;
    str2[i] = chr2;
    str2[i+1] = 0;
    printf(" lreserv => %d, str2=>%s\n",lreserve,str2);
    if (lreserve) {
    dash2remark(f_in,f_out,str2);
    else {
    for( i=0;i<strlen(str2);i++) fputc(str2,f_out);
    else {
    fputc(chr1, f_out );
    fclose(f_out);
    fclose(f_in);
    return;
    int dash2remark( f_in,f_out,str)
    FILE f_in,f_out;
    char *str;
    int i,j,start_pos=-1,end_pos=-1;
    for( i=0; i < strlen(str); i++ ) {
    if ( str[i] == '-') {
    start_pos = i;
    for( j =0 ; j < MAXWORDS; j++){
    if (strncmp(s_reserve[j],str+i,strlen(s_reserve[j]))== 0){
    end_pos = i;
    if ( start_pos > 0 ) {
    for(i=0;i< (start_pos-1); i++)
    fputc( str[i],f_out);
    fputc('/',f_out); fputc('*',f_out);
    for(i =i+2;i<(end_pos-1);i++)
    fputc(str[i],f_out);
    fputc('*',f_out); fputc('/',f_out);fputc(' ',f_out);
    for(i;i<strlen(str);i++)
    fputc(str[i],f_out);
    else {
    for(i=0;i<strlen(str);i++)
    fputc(str[i],f_out);
    return(1);
    이상입니다.

    Hi, i think that the problem is around the rollback segments.The solution is bring other rollback segments ONLINE state, if not exist others rollbackup,then you need create the other rollback segments and bring online state.
    If you need more information, you will must see the next DOC-ID on Metalink site,
    Note:121971.1
    Luck.
    Have a good day.
    Regards.

  • Transport Error when Importing appset in target system

    We are receiving the below error when importing the appset TEST in Quality system.
    We have include all the objects in the transport by setting UJT_TRANS_CHG to D for all TLOGO objects.
    Any clues to what the problem could be?
    Post-import method RS_AFTER_IMPORT started for APPS L, date and time: 20110519104427
    Post-processing taking place in client 100
    Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Activation Mode)
    Start After Import for AppSet TEST in Client 100 for RFC BI system
    Import Step UPDPTAB completed without errors
    Import Step ADMIN_DEF_UPD completed without errors
    Import Step FILE_SERV_UPD completed without errors
    Import Step DATA_TABLE_UPD completed without errors
    After Import method for AppSet TEST finished successfully
    Start of data checker messages
    Missing File/Dir:
    Missing File/Dir:
    Dimension COSTCENTER's master is empty!
    Dimension DATASRC's master is empty!
    Dimension PROFITCENTER's master is empty!
    BPF: Error reading master data
    Invalid attribute name (ACCTYPE) in dimension (CO_ENTITY)
    BPF: Validation error; Previous step has no matched step region "BR02"
    BPF: Validation error; Previous step has no matched step region "BR05"
    Start of the after-import method RS_APPS_AFTER_IMPORT for object type(s) APPS (Delete Mode)
    Nothing to delete.
    End of after import methode RS_APPS_AFTER_IMPORT (Delete Mode) - runtime: 00:00:00
    Errors occurred during post-handling RS_AFTER_IMPORT for APPS L
    RS_AFTER_IMPORT belongs to package RS
    The errors affect the following components:
        BW-WHM (Warehouse Management)
    Post-import method RS_AFTER_IMPORT completed for APPS L, date and time: 20110519104506
    Post-import methods of change/transport request BPDK900158 completed
          Start of subsequent processing ... 20110519104427
          End of subsequent processing... 20110519104506
    Execute reports for change/transport request: BPDK900158
    Reports for change/transport request BPDK900158 have been executed
          Start of................ 20110519104506
          End of.................. 20110519104506
    Execution of programs after import (XPRA)
    End date and time : 20110519104506
    Ended with return code:  ===> 8 <===

    Hi Naresh,
    Thanks for reply.
    We have checked driver dim and region dim(s) members. Its looks fine. Even though we are facing import error.
    As per basis guidance we have executed program  SE38--> UJA_DATA_CHECKER  on source system appset. And observed there are several errors showing up related to BPFs & Invalid attribute name ACCTYPE for CO_ENTITY dimension.
    If any of you faced similar issue. Please share your input in this regard.
    Regards
    Amit

  • "Error when interpreting the runtime repository"  BSP Component workbench

    Hello,
    I have enhance the Component BP_HEAD_SEARCH under some enhancement set in my development system. After transporting all my changes to Quality system, when checking the same development in BSP_WD_CMPWB it is showing an error -- "Error when interpreting the runtime repository" for the same component and enhancement set.
    I have copied the repository.xml file from the development and again transported it to Quality system, even then the same error is coming.
    Could anyone please suggest how to remove it Quality system, the error is not coming in Development system.
    Regards,
    Shobhit Srivastava

    Hi Pankaj,
    Try as above said
    find the enhancement Z_* bsp application ,compare it with SAP bsp application.
    if the XML file lost,
    add the xml file toZ_* BSP application..
    If it doesnt work leave it as it is.It will not affect your system.In our system also there is a  same error .
    Have a nice time!!!!!!!!!

  • Error when interpreting the runtime repository Message no. BSP_WD_TOOLS030

    Hi All,
    I have created an enhancement for ICWC component ICCMP_BP_DETAIL.
    While trying to diplay this using trn BSP_WD_CMPWB , I am getting the message
    Error when interpreting the runtime repository Message no. BSP_WD_TOOLS030.
    What is the reason behind this? Also while testing this application the web page that
    opens up remains blank...
    Can anybody help me out with this?
    thanks
    Juhi Kulshreshtha

    Juhi,
    I meant Re: Error while loading the runtime repository in transaction BSP_WD_CMPWB
    check it out.
    Regards,
    Amar.

  • "Error when interpreting the runtime repository"  for IUICOBJD component

    Hello experts,
    I create an enhancement set for IUICOBJD component, and the systems return my the error:
    "Error when interpreting the runtime repository"
    Then in ICWEB, this enhancement affect to the view  connectionObject. And this view doesn't appear.
    Someone had some problems to create an enhancement set for IUICOBJD component ??
    Is necesary to make somenthing  with IUICOBJ component before to create the enhancement for IUICOBJD.
    Could you tell me the steps to solve this??
    Thanks in advance.
    Best regards.

    Hello Ismail, thanks for you help, I have tried to make this and the repository is the same code.
    Do you know if is necesary to make something special to create an enhancement for IUICOBJD component ?? make something first with IUICOBJ and then with IUICOBJD???
    I haven't any problems with other components for example with IUICMD the enhancement run ok.
    Thanks in advance.
    Best regards.

  • Error when importing CO Hierarchies from R/3 DEV to R/3 QAS

    Dear SDN,
    I am getting the following error when importing Cost center and cost element hierarchies from R/3 DEV to R/3 QAS...
    Object OSOA  0COSTCENTER_0101_HIER has not yet been imported successfully
    Object OSOA  0COSTELMNT_0102_HIER has not yet been imported successfully
    Ended with Return code ===8...
    But The two hierarchies were available in R/3 QAS and also i am able to utilise..
    My doubt is if i transport these hierarchies from R/3 QAS to R/3 Production any major issues...
    Now i want to test a data in BW DEV from R/3 Production data...
    So, I am planning to transport These hierarchies from R/3 QAS to R/3 PROD...
    Here we do not have BW QAS...So, getting data from R/3Production to BW DEV and testing...
    After testing Directly use in BW Production...
    So, Please suggest me why when importing these hierarchies errors occuring???
    Help will be greatly appreciated with points...
    Thanks in advance...

    Hi Venkat,
    Please go through the following threads...
    Hierarchy  Transports
    Transporting cost center and profit center standard hierarchies
    /community [original link is broken]://Transporting a hierarchy
    Transport Hierarchy
    Khaja

  • Error when importing ST_PI 2005_1_620

    Hi
    I am getting error when importing ST-PI 2005_1_620 in of our system.
    Here is the details on the log:
      Follow-up action PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L started at 20081027152321
      Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
      Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
      Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
      Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
      Errors occurred during post-handling PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L
      PRGN_AFTER_IMP_ACTGROUP_ACGR belongs to package S_PROFGEN
      The errors affect the following components:
         BC-SEC-USR-PFC (Authorization and Role Management)
      Follow-up action PRGN_AFTER_IMP_ACTGROUP_ACGR for ACGR L ended at 20081027152325
    Looking for your expert advise.
    Thanks

    Invalid object D_MD_DATA in role SAP_SDCCN_ALL deleted
    Have you reviewed the role?
    Regards
    Juan

  • There is an error when create owb runtime repository

    ORACLE 9.0 owb 10.1.0.4
    There is an error when create owb runtime repository,it has been finished 88%.
    INS0022:衍生程序错误。
    The context in the log as follows:
    Tue Feb 24 15:08:55 CST 2009
    oracle.wh.util.DebugUtility: loading : class oracle/bali/rts/tools/RTSProperties
    Tue Feb 24 15:08:55 CST 2009
    oracle.wh.util.DebugUtility: loading : class oracle/bali/rts/tools/RTSProperties$_MutableResult
    Tue Feb 24 15:08:55 CST 2009
    oracle.wh.util.DebugUtility: loading : class oracle/bali/rts/tools/ListRTSWriter
    Tue Feb 24 15:08:55 CST 2009
    oracle.wh.util.DebugUtility: loading : class oracle/bali/rts/tools/XRTSGenerator
    Tue Feb 24 15:08:56 CST 2009
    oracle.wh.util.DebugUtility: loading : class oracle/bali/rts/tools/OrderedDictionary
    Tue Feb 24 15:08:56 CST 2009
    oracle.wh.util.DebugUtility: loading : class oracle/bali/rts/tools/XRTSMakeBundle
    Tue Feb 24 15:08:56 CST 2009
    oracle.wh.util.DebugUtility: loading : class oracle/bali/rts/tools/RTSWriter
    Tue Feb 24 15:08:56 CST 2009
    oracle.wh.util.DebugUtility: loading : class oracle/bali/rts/tools/UnicodeEscapes
    Tue Feb 24 15:08:56 CST 2009
    oracle.wh.util.DebugUtility: loading : class oracle/bali/rts/tools/XRTSParser$1
    Tue Feb 24 15:08:56 CST 2009
    oracle.wh.util.DebugUtility: loading : resource oracle/bali/rts/tools/Config.txt
    Tue Feb 24 15:10:04 CST 2009
    oracle.wh.util.DebugUtility: ORA-00603: ORACLE server session terminated by fatal error
    Tue Feb 24 15:10:04 CST 2009
    oracle.wh.util.DebugUtility: [processSPAWN]: A spawned program error. Exception = java.lang.Exception: Error : ORA-00603: ORACLE server session terminated by fatal error
    Tue Feb 24 15:10:04 CST 2009
    oracle.wh.util.DebugUtility: [processSPAWN]: Get the error, stop processing...
    I don't know how to solve the problem.
    who can help me? Thank you very much.
    Edited by: [email protected] on 2009-2-23 下午11:37

    This quesiton has been solved.
    I don't delete some same roles.
    Thanks.

  • "error when importing object" when selecting variant

    Hello,
    we recently migrated from 4.6 to 4.7.
    For some programs, when selecting a variant, this gives a runtime error, like
    Error when importing object "C131A2"
    What is the cause of this? Because the values in the variant aren't valid anymore?
    How can this be solved?
    Thanks in advance for the help

    Glad to help - you'll likely have to run it after every upgrade (for different reports).
    Rob

  • Error when importing from Excel in SAP

    Hello experts,
    My gets error when importing price list using the import form Xl menu :
    (-1200) DBMCconnBase::EndTransaction SQLEndTran sqlState 08S01, nativeErr: 0, errText:[Microsoft][SQL Native Client] Communication link failure
    This happens only when connected with SAP Client, it never happens when connected in terminal server directly on SAP server.
    Server 2003, MSSQL 2005 SP2
    SAP 2007 Sp01 PL08 HF01
    This has always been working before, it has stopped working when he changed the motherboard 3 weeks ago. Nothing else have changed.
    Any idea where to look at?
    Thanks!
    Chris

    hello Gordon,
    Thanks for your answer. that would have probaly fix the issue
    my techs fixed the issue by doing the 2 following thinks, i don't know if only one of them would have fix it.
    1. in the boot.ini file there was a /3G in the end, restricting the memory to 1G for the OS. The tech deleted it.
    2. in management studio, the technician changed the memory reserved for sql from 9/12 to 14/16Gb
    there was probably not enough RAM available for the import.
    since that change it works well.
    Thanks again!
    Christophe

  • Org.apache.jasper.JasperException; JCO error when Importing SAP Roles in C

    Hello experts,
    I have installed BOXI 3.1 SP3, Integration kit SP2, BW/BI 7.0 and ECC 6.0 on Windows 2008/64bit.
    My goal is to import the roles into CMS from SAP BW/BI but getting the follwoing errors:
    JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
    JCO.nativeInit(): Could not initialize dynamic link library sapjcorfc
    C:\Windows\SysWOW64\sapjcorfc.dll: Can't load AMD 64-bit .dll on a IA 32-bit platform.
    java.library.path [C:\Windows\SysWOW64\;D:\Business Objects\BusinessObjects Enterprise 12.0\win32_x86\]
    org.apache.jasper.JasperException
    I followed the note 1292144 - JCO error when Importing SAP Roles in CMC,but unfortunately without success.
    I installed SAP JCo Release 2.1.9 (64bit)
    Best regards
    Lutz
    Edited by: Lutz Heinrich on Aug 12, 2010 4:17 PM

    Install the 32bit version of the Java connector. BOBJ is 32bit so even on 64bit Windows you need the 32bit version of the Java Connector.
    Regards,
    Stratos

  • CL_SFW_SYSTEM_SETTINGS error when importing SPs

    When we want to import the support packages SAP_BASIS, SAP_ABA, SAP_BW,
    PI-BASIS untill packages level 7 ( we come from level 4) and the HR
    untill package level 26 we run into the short text error when importing
    the basis, aba, pi-basis and bw package.
    I tried to use the following notes:
    1281321 but this gives the error: DEQUEUE_ENQBADIIMPL_ENH
    1483283 but this fails also as when I perform tp unlock_EU <SID>
    pf=/usr/sap/<sid>trans/bin/TP_DOMAIN_<SID>.PFL it tells me it need to be done
    via SE03.
    1532661 this one sents me to note 1414700 and 1366282 but the last ones
    sents you back to 1483283 and note 1414700 when I want to implement it
    with snote it tells me I need to use transaction SE03 for system settings.
    Is there any other option to get this issue fixed? as we need to upgradesome other systems aswell with these support packages
    Dump message is:
    Runtime error          SYNTAX_ERROR
    Datum en tijd          27.06.2011 14:05:47
    Korte tekst
         Syntax error in program "CL_SFW_SYSTEM_SETTINGS========CP ".
    Wat is er gebeurd?
         Error in the ABAP Application Program
         The current ABAP program "CL_SFW_RO_FACTORY=============CP" had to be
          terminated because it has
         come across a statement that unfortunately cannot be executed.
         The following syntax error occurred in program
          "CL_SFW_SYSTEM_SETTINGS========CP " in include
          "CL_SFW_SYSTEM_SETTINGS========CCIMP " in
         line 215:
         "Type "SFW_BF_STATE_CHANGE" is unknown"
         The include has been created and last changed by:
         Created by: "SAP "
         Last changed by: "SAP "
         Error in the ABAP Application Program
         The current ABAP program "CL_SFW_RO_FACTORY=============CP" had to be
          terminated because it has
    come across a statement that unfortunately cannot be executed.
    enanalyse
    The following syntax error was found in the program
    CL_SFW_SYSTEM_SETTINGS========CP :
    "Type "SFW_BF_STATE_CHANGE" is unknown"
    Startpunt van runtime error
        Programma                               CL_SFW_RO_FACTORY=============CP
        Include                                 CL_SFW_RO_FACTORY=============CCIMP
        Regel                                   1.889
        Moduletype                              (METHOD)
        Modulenaam                              INIT
    1862           obj  = obj.
    1863   ENDMETHOD.                    "create_object
    1864
    1865   method get_instance_for_locals.
    1866     create object reg.
    1867     reg->obj_factory = factory.
    1868   ENDMETHOD.                    "get_instance_for_locals
    1869
    1870 ENDCLASS.                    "lcl_sfw_obj_registry IMPLEMENTATION
    1871
    1872
    1873 ----
    1874 *       CLASS lcl_sfw_system_settings IMPLEMENTATION
    1875 ----
    1876 *
    1877 ----
    1878 class lcl_sfw_system_settings implementation.
    1879
    1880   method get_instance.
    1881     if ( singleton is initial ).
    1882       create object singleton.
    1883       singleton->init( ).
    1884     endif.
    1885     instance = singleton.
    1886   ENDMETHOD.                    "get_instance
    1887
    1888   method init.
    >>>>>     me->system_settings = cl_sfw_system_settings=>get_instance( ).
    1890   ENDMETHOD.                    "init
    1891
    Edited by: C. Bults on Jun 27, 2011 2:35 PM
    Removed customer system name

    The following is the solution.
    Symptom
    When you import the Support Packages SAP_BASIS 7.00 Support Package 14 and
    Support Package16 in a queue, the runtime error SYNTAX_ERROR occurs in
    class CL_SFW_SYSTEM_SETTINGS (program CL_SFW_SYSTEM_SETTINGS========CP).
    More Terms
    Syntax error, CL_SFW_SYSTEM_SETTINGS, SPAM, SYNTAX_ERROR,
    CL_SFW_SYSTEM_SETTINGS========CP
    Cause and Prerequisites
    This problem is due to a program error.
    Solution
    Option 1:
    Import Support Package 14 and Support Package 16 in separate queues.
    Option 2:
    After the error mentioned above occurred, regenerate the enhancement spot
    SFW_SWITCH_CHANGED in transaction SE18.
    To do this proceed as follows:
    1. Call transaction SE18.
    2. Enter the enhancement spot SFW_SWITCH_CHANGED.
    3. Choose "Display".
    4. Choose the menu option "Enhancement Spot -> Activate".
    You can now import the queue using the Support Package Manager

  • Error when importing object P_lis

    Hello Experts ,
    I have a task assigned to me where i have to write a program to get all the reports and their variants( variants without space and non obselete variants)
    When i am trying to access the variant SDCAS_ADRSEL , I am getting a dump "Error when importing object P_lis ". It has got only one variant JOJO1 in the vari table  . Please help me out with this.

    Hi Aditya,
    You might need to provide a few more details on the dump. 
    I.e.
    Exact details of the error that occured.
    Where the error occurred
    You can grab these out of the dump in ST22. That should help people out, to help understand what you are doing, as it's not really clear from your current description. 
    Cheers,
    Katan

Maybe you are looking for

  • Error message when compiling book "file is corrupt" referring to a photo.  Or "cannot find original photo".  Can you use photos that have been "edited" out of "Book Mode"?

    Error message when compiling book "file is corrupt" referring to a photo.  Or "cannot find original photo".  Can you use photos that have been "edited" out of "Book Mode"?

  • Can't open Word 97 files

    My IPad2 has home sharing with my notebook PC, running Windows XP with service pack 3.  My problem is that several Apps will not read some Word 97 files. They show up in folder lists, etc, but trying to open them results in the message "An error occu

  • Nokia Lumia 1520 Firmware

    The 1520 is no longer available new in Australia do on a trip to Taiwan I purchased an RM937 CHT model. Back in Australia, reset the device and loaded 8.1 cyan and the device is brilliant... Almost... Firmware is still CHT firmware and I would like t

  • How to delete SAPScript in Quality server?

    Hello to All, our custom Z* SAPscript form has to be deleted in all systems. It is deleted in Development server in all clients, except client 000.. Unfortunately it remains in Quality server client 100 even after the transport is released. Any ideas

  • CONCAT TWO FIELDS

    Hi I am using oracle 9i and developer 6i in windows platform. I have two field Draft number(6,2),Length number((3) in my test table. My query is Select concat(concat(substr(draft,1,4),'/'),length) LOA_DFT from test I want to display my Draft and leng