Error when inital load to cuble

we are in 3.5,
and I am doing a delta lode into a cube from ODS and it gives error says
"Incorrect records were discovered. The incorrect records could not be written into a PSA.
Time conversion from 0CALDAY to 0FISCPER (fiscal year K4) failed with value 13020601
Error 5 in the update"
Any idea? and how can I fix it.
Please advice me

your DSO has an incorrect CALDAY of 13020601 and there is an automatic conversion of CALDAY to FISCPER in your cube update rules .
Either delete this entry from the active data / change log of the DSO or correct the same and put necessary filters in the infopackage to load into cube.
Edited by: Arun Varadarajan on Feb 2, 2009 10:40 PM

Similar Messages

Error while init load of ODS

HI Gurus,
I deleted entire ODS data.And now want to do reinit load.But i am getting below error.
From where I can see and delete delta queue.How to do that resetting status and all..
Error for init package :
Deltas have already been loaded for the init. selection of request REQU_4EBWUXD8QKYLD7YV635G17CCR. A second initialization is therefore not possible with these selection conditions.
Procedure
If you want to carry out a new initialization, you have to choose selections that do not overlap.
If you want to repeat the init. for the same selection, you have to delete the delta queue in the source system, and restart the delta process.
Choose the menu entry 'Init. Selections in the Source System' from the Scheduler.
Please help.
Thanks,
Prasanna N.
Edited by: prasanna nadgouda on Jul 1, 2009 8:44 PM
Edited by: prasanna nadgouda on Jul 1, 2009 8:58 PM

HI,
While deleting that init request I get an warning..
If the delta process of your DataSource stipulates serialization, you can no longer post this init request or any subsequently requested delta requests to the DataStore objects that were filled previously, after you have deleted the initialization and reinitialized. This is because old inits and deltas still exist.
The DataStore object recognizes that new inits and deltas have been created that are not yet posted in the DataStore object and requires them to be updated. Otherwise the selections of the new inits overlap with the selections of the old inits that are still in the DataStore object, so that they cannot be posted.
Does this is somthing critical..How should I go ahead..?

Error when Bulk load hierarchy data

Hi,
While loading P6 Reporting databases following message error appears atthe step in charge of Bulk load hierarchy data into ODS.
<04.29.2011 14:03:59> load [INFO] (Message) - === Bulk load hierarchy data into ODS (ETL_LOADWBSHierarchy.ldr)
<04.29.2011 14:04:26> load [INFO] (Message) - Load completed - logical record count 384102.
<04.29.2011 14:04:26> load [ERROR] (Message) - SqlLoaderSQL LOADER ACTION FAILED. [control=D:\oracle\app\product\11.1.0\db_1\p6rdb\scripts\DATA_WBSHierarchy.csv.ldr] [file=D:\oracle\app\product\11.1.0\db_1\p6rdb\temp\WBSHierarchy\DATA_WBSHierarchy.csv]
<04.29.2011 14:04:26> load [INFO] (Progress) - Step 3/9 Part 5/6 - FAILED (-1) (0 hours, 0 minutes, 28 seconds, 16 milliseconds)
Checking corresponding log error file (see below) I see that effectively some records are rejected. Question is: How could I identify the source of the problem and fix it?
QL*Loader: Release 11.1.0.6.0 - Production on Mon May 2 09:03:22 2011
Copyright (c) 1982, 2007, Oracle. All rights reserved.
Control File: DATA_WBSHierarchy.csv.ldr
Character Set UTF16 specified for all input.
Using character length semantics.
Byteorder little endian specified.
Data File: D:\oracle\app\product\11.1.0\db_1\p6rdb\temp\WBSHierarchy\DATA_WBSHierarchy.csv
Bad File: DATA_WBSHierarchy.bad
Discard File: none specified
+(Allow all discards)+
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Bind array: 64 rows, maximum of 256000 bytes
Continuation: none specified
Path used: Conventional
Table WBSHIERARCHY, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
PARENTOBJECTID FIRST * WHT CHARACTER
PARENTPROJECTID NEXT * WHT CHARACTER
PARENTSEQUENCENUMBER NEXT * WHT CHARACTER
PARENTNAME NEXT * WHT CHARACTER
PARENTID NEXT * WHT CHARACTER
CHILDOBJECTID NEXT * WHT CHARACTER
CHILDPROJECTID NEXT * WHT CHARACTER
CHILDSEQUENCENUMBER NEXT * WHT CHARACTER
CHILDNAME NEXT * WHT CHARACTER
CHILDID NEXT * WHT CHARACTER
PARENTLEVELSBELOWROOT NEXT * WHT CHARACTER
CHILDLEVELSBELOWROOT NEXT * WHT CHARACTER
LEVELSBETWEEN NEXT * WHT CHARACTER
CHILDHASCHILDREN NEXT * WHT CHARACTER
FULLPATHNAME NEXT 8000 WHT CHARACTER
SKEY SEQUENCE (MAX, 1)
value used for ROWS parameter changed from 64 to 21
Record 14359: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 14360: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 14361: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 27457: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 27458: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 27459: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 38775: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 38776: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 38777: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 52411: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 52412: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 52413: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 114619: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 114620: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 127921: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 127922: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 164588: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 164589: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 171322: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 171323: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 186779: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 186780: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 208687: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 208688: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 221167: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 221168: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Record 246951: Rejected - Error on table WBSHIERARCHY, column PARENTLEVELSBELOWROOT.
ORA-01400: cannot insert NULL into ("ODSUSER"."WBSHIERARCHY"."PARENTLEVELSBELOWROOT")
Record 246952: Rejected - Error on table WBSHIERARCHY, column PARENTOBJECTID.
ORA-01722: invalid number
Table WBSHIERARCHY:
+384074 Rows successfully loaded.+
+28 Rows not loaded due to data errors.+
+0 Rows not loaded because all WHEN clauses were failed.+
+0 Rows not loaded because all fields were null.+
Space allocated for bind array: 244377 bytes(21 rows)
Read buffer bytes: 1048576
Total logical records skipped: 0
Total logical records read: 384102
Total logical records rejected: 28
Total logical records discarded: 0
Run began on Mon May 02 09:03:22 2011
Run ended on Mon May 02 09:04:07 2011
Elapsed time was: 00:00:44.99

Hi Mandeep,
Thanks for the information.
But still it doesnot seem to work.
Actally, i have Group ID and Group Name as display field in the Hiearchy table.
Group ID i have directly mapped to Group ID.
I have created a Split Hierarchy of Group Name and mapped it.
I have also made all the options configurations as per your suggestions, but it doenot work still.
Can you please help.
Thanks,
Priya.

No selection in infopackage possible when Init-load

Hello all,
I have created a loading proccess from an ODS to an Infocube via delta-load. I want to restrict the data and therefore I want to use the selction tab from the infopackage menu. But this is just possible when I choose full-load. When I choose Init-load or delta-load, there is no restriction possible in the selection screen.
Ho can I restict data when i load via delta? the release is 3.5.
Any help would be great.
Best Regards,
Stefan from Munich/Germany

Dear Stefan,
You can not restrict an init/ delta load from an DSO, because the data loaded will correspond to the change log table of the DSO.
What you can do is a "fake" delta. You put a "changed date" in you DSO (filled by the sy-datum in the update rule) and then do a full load from your DSO to your cube with the selection you want and changed data = today. But you will have to be careful in case of reload...
Hope it helps,
Rodolphe

Error when re-loading QuickTime

Recevied msg stating I needed to unload and load QuickTime. Unload appeared sucessful but nowreceiving the following error when trying to download Quicktime:
c:\Documents and Settings\Owner.YOUR-B54A0F8E5B\Local Settings\Temporary Internet Files\Content IE5\N6PX1OCQ\iTunesSetup[1].exe is not a valid win32 application
What do I need to do to get it to load?

Odd message error. Owner.Your-B54A0F8E5B, this number could just be from when the computer was new before the computer itself was giving a name, if it ever was.
The N6PX10CQ would be one of the directories to the Temporary Internet Files folder. I'd try deleting the contents of that folder and anything in the Temp folder as well that isn't neccessary. To see if that brings any luck.

Error when i loading data

Hi,
when i load the 3.x master data text throgh infopackage to PSA i got error as Caller 09 contains an error message.
The detailed messages--
 Diagnosis
 In the source system, there is no transfer structure available for
 InfoSource 0STOR_LOC_TEXT .
System Response
 The data transfer is terminated.
Procedure
 In the Administrator Workbench, regenerate from this source system the
 transfer structure for InfoSource 0STOR_LOC_TEXT .
Please urgent..
Thanks in Advance

Hi,
Thanks for quick response..
now i am not gettng above error for 0plant_attr, another error arises after DTP
in details tab it shows as
Exceptions in Substep: Extraction Completed
is shows program as
method raise_step_failed_callstack.
types: begin of lty_s_callstack,
 mainprogram like sy-repid,
 include like sy-repid,
 line type i,
 eventtype type dbglevtype,
 event type dbglevent,
 flag_system type c length 1,
 end of lty_s_callstack.
data: l_t_mycallstack type table of lty_s_callstack.
data: l_s_mycallstack type lty_s_callstack.
call 'ABAP_CALLSTACK' id 'DEPTH' field 99
 id 'CALLSTACK' field l_t_mycallstack. "#EC CI_CCALL
data: l_s_callstack type abap_callstack_line,
 l_t_callstack type abap_callstack.
loop at l_t_mycallstack into l_s_mycallstack from 2.
 move-corresponding l_s_mycallstack to l_s_callstack.
 append l_s_callstack to l_t_callstack.
endloop.
raise exception type cx_rs_step_failed
 exporting
 textid = i_textid
 previous = i_previous
 object = i_object
 key = i_key
 steptext = i_steptext
 t_callstack = l_t_callstack.
endmethod.
how can i rectify the error

Error during Init loading

Hi All,
I am loading the data from source system to infocube. And extraction mode as init load.When I am executing, I am getting an ABAP Debugger window and I am unable to load the data.
Please could help, how to load the data without getting ABAP Debugger window.
Thanks in Advance.

Hi Abdul,
Please look for start routine, end routine, field routine, Transformation routine, Update rule routine and check either of this have any break point set in the code.
Also if you are using DTP, check the settings over there, whether you have selected Debug mode while scheduling the load.
This might help!
Regards,
Melissa

NOWAIT error when sql loading

I've this process that would perform multiple sql load into the same table with append option. It was working fine and then I get this error in 1 of my load.
Number to load: ALL
Number to skip: 0
Errors allowed: 50
Continuation: none specified
Path used: Direct
Table OWNER.SCORES_TEMP, loaded from every logical record.
Insert option in effect for this table: APPEND
TRAILING NULLCOLS option in effect
Column Name Position Len Term Encl Datatype
ID FIRST * | O(") CHARACTER
HSE NEXT * | O(") CHARACTER
PROB NEXT * | O(") CHARACTER
MODEL NEXT * | O(") CHARACTER
SCORE_DATE NEXT * | O(") DATE YYYY-MM-DD
SQL*Loader-951: Error calling once/load initialization
ORA-00604: error occurred at recursive SQL level 1
ORA-00054: resource busy and acquire with NOWAIT specified
I;ve read that update could cause this error, but haven't found anything on sql loading. What to do?
Ku

Be sure that no one (tools, program, session, previous sqlldr session, etc ) are using the underlining table.
ciao

Getting error when we loading the data to 0TCT_C01

When we are loading the delta loads to 0TCT_C01 cube , Load got failed saying that "Job terminated in source system --> Request set to red".
Below is the details abou the dump:
Runtime Errors         COMPUTE_INT_TIMES_OVERFLOW
Exception              CX_SY_ARITHMETIC_OVERFLOW
Date and Time          10/05/2009 09:56:36
Short text
     Whole number overflow on multiplication.
What happened?
     Error in the ABAP Application Program
     The current ABAP program "CL_RSTCT_BIRS_EXTRACTION======CP" had to be
      terminated because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Please do help me to solve this error.
Thanks in advance.
Regards,
Anil

Hi Anil,
Please check the below SAP Note:
Note 1323805 - 0TCT_DS01 run time error -COMPUTE_INT_TIMES_OVERFLOW
Hope this helps.
Veerendra.

Getting a security error when I load VueLink

When I try to load VueLink in my browser to check the status of the servlet, I get the following error...
exception
javax.servlet.ServletException: Error instantiating servlet class com.cimmetry.servlet.VueServlet
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852)
     org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588)
     org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
     java.lang.Thread.run(Thread.java:619)
root cause
java.lang.SecurityException: class "com.cimmetry.core.ObjectID"'s signer information does not match signer information of other classes in the same package
     java.lang.ClassLoader.checkCerts(ClassLoader.java:807)
     java.lang.ClassLoader.preDefineClass(ClassLoader.java:488)
     java.lang.ClassLoader.defineClassCond(ClassLoader.java:626)
     java.lang.ClassLoader.defineClass(ClassLoader.java:616)
     java.security.SecureClassLoader.defineClass(SecureClassLoader.java:141)
     org.apache.catalina.loader.WebappClassLoader.findClassInternal(WebappClassLoader.java:2331)
     org.apache.catalina.loader.WebappClassLoader.findClass(WebappClassLoader.java:976)
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1451)
     org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1329)
     java.lang.Class.getDeclaredConstructors0(Native Method)
     java.lang.Class.privateGetDeclaredConstructors(Class.java:2389)
     java.lang.Class.getConstructor0(Class.java:2699)
     java.lang.Class.newInstance0(Class.java:326)
     java.lang.Class.newInstance(Class.java:308)
     org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:298)
     org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:852)
     org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:588)
     org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:489)
     java.lang.Thread.run(Thread.java:619)
Any Idea's?

Looks like a certificate error.
Check your cacerts file in C:\Program Files\jVue\jre\lib\security to ensure you have the proper entries if you are using SSL.

Error when execute Load Plan

Dear all,
When I tried to execute the Load Plan , I get this error:
ODI-1551 the dbms_lock acquisition faild with sql exception
OR06550: ????1?????7.
PL00201: identifier 'DBMS_LOCK' must be declared.
OR06550: ????1?????7.
PL/SQL statement ignored.
Thank you,

The link as below maybe helpful
dbms lock must be declared

Why have I an error when I load an external .swf?

Hello, everybody...
I have this error message when I try to load an external .swf into my .swf:
*** Violazione della sicurezza sandbox ***
SecurityDomain 'http://192.168.1.2/fms3/Logopedia/AnalisiVisiva.swf' ha cercato di accedere a un contesto incompatibile 'file:///C|/Documents%20and%20Settings/TOSHIBA%20SATELLITE/Desktop/Tesi%20Magistrale/Prog etti/VideoComm/VideoComm.swf'
SecurityError: Error #2070: Violazione della sicurezza sandbox: il chiamante http://192.168.1.2/fms3/Logopedia/AnalisiVisiva.swf non può accedere allo stage appartenente a file:///C|/Documents%20and%20Settings/TOSHIBA%20SATELLITE/Desktop/Tesi%20Magistrale/Proge tti/VideoComm/VideoComm.swf.
    at flash.display::Stage/requireOwnerPermissions()
    at flash.display::Stage/addEventListener()
    at fl.core::UIComponent/callLater()
    at fl.core::UIComponent/invalidate()
    at fl.controls::BaseButton/setMouseState()
    at fl.controls::BaseButton/mouseEventHandler()
My external .swf is a project that write on a server side text file the words that I write into textInput on client side. So I have an .asc file.
I use an Apache Web Server and FMS3.
Can someone helps me? Please.
Emiliano.

Hi gymtrainger55,
When having iTunes Store connectivity issues, the following articles provide the best solutions:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thanks,
Matt M.

Getting a #7 error when dynamically loading a VI using a DLL

Problem invoking a VI dynamically in LabVIEW 7.0.
Example files are attached (simply extract the files
in one directory).
I have a VI, Invoker.vi, that dynamically invokes
another one, Basic VI.vi.
If I use Invoker.vi natively, no problem, everything
works.
Now, I build Invoker.vi as a shared library
(Invoker.dll), and call it from an executable
(CallingLabVIEW.exe, requires .Net Framework 1.1,
you can create your own by simply calling the
long Invoker(LVBoolean *status) method from the DLL).
I get an error:
Open VI Reference in Invoker.vi->Invoker.vi.ProxyCaller
Anyone knows what I may be doing wrong?
I've tried putting the full path name of Basic VI.vi,
same result
Thanks in advance,
phil
Attachments:
Invoker.zip ‏42 KB

Zvezdana,
Thanks for the help, but... ...I had forgotten to mention that I *had* tried adding the VI in the build process. It didn't solve the issue, and in any case having to build with all the dynamic VIs would not be practical for what I'm trying to achieve.
Another note on this matter: I have an application (an EXE) built that calls dynamic VIs without having them included in the build, and that works. I believe adding dynamic VIs to the build is only useful if the dynamic VIs are not going to be deployed with the application otherwise. But, if they are available on the target host at the path specified when you run the application, it should work even if you didn't include them in the build.
Thanks again,
phil

Drawing error when pdf loads

I keep getting an error message saying "a drawing error has occurred" when I download a multi-page pdf which I've uploaded to one of my websites.
The download completes and looks ok but the message happens every time I start the download. Anyone got any ideas why this is happening? The pdf was generated in Photoshop CS3 and I've tried remaking the individual pdfs which make up the multi-page one but it makes no difference.

Hi Michael. Sorry about the delay in replying. The notification email went into my spam folder!
I'm using Dreamweaver CS3 to upload via ftp.

Error when opening down loads

when searching irish sites , if I open PDf file ,I can read it , if I save it ,Ican't reopen it ,an error occurs . thanks larry

Its the full version purshased I get no errors when down loading I get the icon on the down loaded file as I do on all dmg files from the web (could I pay for the posts/boxed version)
I have just tried again this morning and its worked !!

Error when inital load to cuble

Similar Messages

Maybe you are looking for