Error when inserting install disc

Hi, When inserting a retail OS X Tiger disc into my G5 Tower to do an archive and install, when the computer boots of the CD, I get a Kernal Panic and cannot continue?
I have run permissions, and disk verify and all OK, also have completed 'memtest' and all ok there too.
Any thoughts?
Thanks

When you try to boot from the disc, are you depressing the C key at startup? Or depressing the Option key at startup to activate the Startup Manager screen & then selecting the install disc? Whichever method you are using, try the other method.
KPs are usually caused by a hardware problem - USB, Firewire or RAM. Disconnect all external devices. If you have the Apple Hardware Test app on the discs that came with your Mac, run the AHT.
 Cheers, Tom

Similar Messages

I get one or the other error when i install SQL server 2012 SP1 in my Lab server

I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htm

Sorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected]

Error when inserting or changing in a sorted table

Hi Experts,
When i am executing a webdynpro application it says Error when inserting or changing in a sorted table. Can any one help for this.
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_COMPONENTCONTROLLER~GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: WDDOMODIFYVIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
in ST22
Object Definition
DATA: lo_node                   TYPE REF TO if_wd_context_node,
        lo_node_info              TYPE REF TO if_wd_context_node_info,
        lo_element                TYPE REF TO if_wd_context_element.
Additional Data declarations
DATA: lv_key TYPE string.
Get context node.
lo_node = wd_context->get_child_node( name = 'DROPDOWNLISTS' ).
lo_node_info = lo_node->get_node_info( ).
Call method to fetch the categories.
CALL METHOD cl_hap_wd_start_page_ui=>category_get_list
    EXPORTING
      add_on_application = add_on_application
    IMPORTING
      t_categories       = lt_categories.
Append Default selection entry 'All'.
lw_category-category_id = '00000000'.
lw_category-category_name = 'All'.
APPEND lw_category TO lt_categories.
Sort table after appending the new entry.
SORT lt_categories ASCENDING.
Loop through the category list and populate key(category_id) value(category_name) pair for
LOOP AT lt_categories INTO lw_category.
    lw_key_value-key = lw_category-category_id.
625     lw_key_value-value = lw_category-category_name.
>>>>>     APPEND lw_key_value TO lt_key_values.------>Here it throws an error
627     CLEAR: lw_key_value, lw_category.
628   ENDLOOP.
629
630 * Bind the category key-value pair to the context attribute.
631   CALL METHOD lo_node_info->set_attribute_value_set
632     EXPORTING
633       name      = 'CATEGORY_LIST'
634       value_set = lt_key_values.
635
636 * Make the entry 'All' as default selected.
637   CALL METHOD lo_node->set_attribute
638     EXPORTING
639       value = '00000000'
640       name = 'CATEGORY_LIST'.
641
642 ENDMETHOD.
643
644 method GET_EMPLOYEES.
645

Hello Durga,
from the error what I understood is lt_key_values is a sorted table and you are trying append a new line to it. Incase of sorted table you need to use the INSERT statement and not the APPEND statement.
INSERT lw_key_value INTO table lt_key_values.
BR, Saravanan

Error when inserting Web Dynpro script in Adobe form

Hi
In my WD component in one of the view I have an ADOBE form (Online scenario) and a button to save data into backend. In the ADOBE form everything is working properly, however the problem is when I click on the button to save, Its not getting into my action code. Even I am not getting any error other than the wait symbol.
In the form I have taken ZCI layout but when i'm inserting Webdynpro Script its showing an error 'Error when inserting Web Dynpro script'.
Please let me know why this error is getting.
Thanks
Ram

Hi Ram,
I hope you help me,
I have the same error, when I insert a web Dynrp Script, what version of SAPGUI do you use?
Thanks

Error when inserting Web Dynpro script

Hello,
I am trying to create a new form using fields from KNA1 and am using ISR controls. When I try to insert Webdynpro scripts i get message "Error when inserting Web Dynpro script" Message no. FPUIFB094.
Has anyone faced this error? no notes are available regarding this and in SDN.
Regards
Prasad

It must be atleast ALD 7.1. Check this [Thread|Re: Problem on Button; having the same issue. Also check the SAPNOTE 962763.

" Error when inserting in PSA table RSTSODSPART" when loading into PSA

Hello,
Did anyone encounter something similar, and found a solution ?
BI 7.0 - EnhP 1 - SP5
When loading data from R/3 into PSA, we encounter following error message:
" Error when inserting in PSA table RSTSODSPART"
===============================================================
- the first datapackage is written successfully to PSA,
but from the second datapackage onwards the error message pops-up
" Error when inserting in PSA table RSTSODSPART"
- The original dataselection in the infopackage is somewhere stored
If the selection in the InfoPackage is reduced (e.g. only one document i.o. a period)
it stil starts loading according the original selection (the month)
- If we create a new InfoPackage and select very few data (only one datapackage)
then we can load to PSA succesfully, but when we load to DSO we can't activate the DSO.
- We remarked that:
Two versions of the PSA exist for that datasource 0FI_GL_40:
a Table(/BIC/B0000555000) in version 1 exists,
a Table(/BIC/B0000555001) in version 2 exists
Thanks in advance,
Best regards

Hello All,
We had a problem similar to what Ilse Depoortere describes. The problem happens in our BW QA system a few days/weeks after it has been copied from Production. Data loads start failing with these two error messages:
RSM2 851 - Error when writing in PSA (Caller 32)
RSAR 130 - Error 7 when adding to PSA (Caller 70)
We have just implemented the fix described in note 1340371 (replaced the LIB_DBSL with patch level 247), and the problem is gone. Failed data load process chains can be restarted and finish successfully.
This has been a really useful discussion, thanks all! And thanks to my coworker Bob who found it.
Vince Vajda

TS3694 i have error when i install restore and update in file unknown occurred error 1015

i have error when i install restore and update in file unknown occurred error 1015

http://http://support.apple.com/kb/TS3694#error1015 this should help you with your problem.

Disc error when I install Panther

I have a powerbook G4 that is really acting up. It has come to the point I had to reinstall my original software. Now when I go too upgrade to Panther it tells me disc error at the end of the installation of the first disc. Also I can not get on the internet. I have installed the 10.2.8 uograde also. Thanks for any help
JOhn

Hi John!
Exactly which model PowerBook G4 is it?
What is the Processor speed?
What size is the Hard Drive, and how much space is available?
How much RAM is installed, and is it original or added?
When manufactured, which version of OS, was pre-installed?
Did you use the original system install discs to reinstall?
Did you perform an Erase & Install?
Are you using the Full Retail Version, of the Panther Install CDs?
ali b

Shared Technologies errors when re-installing Elements 10 from disc

What do I have to do to correct Shared Technologies errors when attempting to re-install Elements 10 from disc?

Hi LouEDG,
Please try renaming OOBE from this Location:
Windows:
C:\Program Files (x86)\Common Files\Adobe
Mac:
Library/Application Support/Adobe
Once done please try installing Elements 10 and it should work.
Regards,
Abhijit

Why am I getting Installation Failed error when running Install package?

Enterprise license holder here. Mac. I've installed ccplauncher, run it, and am now trying to run the Install.pkg. I'm getting an error:
Already tried running disc permissions, still nothing. Erased all old versions of CS (5, 5.5, 6) from my HD using AppCleaner so no resources or plists left behind before installing CC.

Jeff,
You may want to use /Utilities/Console and look at /Library/Logs/Adobe/Installers to see where the failure is actually occurring. Even though it's one install package, it's installing each application in sequence. If only one fails (and all the others succeed) you'll still see the message you received. There can be a lot in the logs, but you can use the Spotlight field to filter out the lines with "return code." Anything other than "0" (zero) indicates something that didn't complete. You can also look for words like "error" or "fail".
There are a bunch of things that can cause an error. I've sometimes had a problem with packages that include a lot of updates but rebuilding them seemed to fix it. Finding out exactly where the error is happening is a big help when you contact support.
I realize this isn't a solution, but hope it helps.
Ric

Error when inserting xml with xsi:noNamespaceSchemaLocation

Hello,
Hopefully this isn't a stupid question....
I am currently using Oracle 9.2.0.6.0 to try out XML.
I haven't been able to get our DBAs to set up XML DB in its entirety so I just have the basics, i.e. I have access to the xmltype object but none of the packages like DBMS_SCHEMA and DBMS_XDB. Therefore, I haven't been able to register any schemas in the database.
So what I'd like to know is why do I get an ORA-21700 error when I try to load an xml document which has the 'xsi:noNamespaceSchemaLocation' attribute'. If I take this out of the XML document, it loads.
From my initial reading, I got the impression that registering a schema in order to validate documents was an optional, although probably an ideal, step to take.
So another way of phrasing this subject might be: can one insert xml documents without the use of a schema?
The example code is shown below.
dbase> INSERT INTO MY_TABLE( id , message_type , status , rcvd_time, filename , xmlcol)
2 VALUES ( 1, 0 , 'RECEIVED', sysdate , 'tempfilename' ,
3 xmltype('<ExampleXML xmlns:xsi = "http://www.w3.org/2001/XMLSchema-instance"
4 xsi:noNamespaceSchemaLocation = "ExampleXML.xsd">
5 <tag1>
6 <tag2 attr1="something">Some data
7 </tag2>
8 </tag1>
9 </ExampleXML>')
10 );
xmltype('<ExampleXML xmlns:xsi = "http://www.w3.org/2001/XMLSchema-instance"
ERROR at line 3:
ORA-21700: object does not exist or is marked for delete
ORA-06512: at "SYS.XMLTYPE", line 0
ORA-06512: at line 1
dbase> ed
Wrote file afiedt.buf
1 INSERT INTO MY_TABLE ( id , message_type , status , rcvd_time, filename , xmlcol)
2 VALUES ( 1, 0 , 'RECEIVED', sysdate , 'tempfilename' ,
3 xmltype('<ExampleXML xmlns:xsi = "http://www.w3.org/2001/XMLSchema-instance"
4 >
5 <tag1>
6 <tag2 attr1="something">Some data
7 </tag2>
8 </tag1>
9 </ExampleXML>')
10* )
dbase> /
1 row created.
The xmlcol column was created simply as an xmltype column.

Basically using XMLType without XML DB is almost impossible in 9.2.x. Please have the DBA's install XML DB by running the script $ORACLE_HOME/rdbms/admin/catqm.sql. They can follow the installing XDB instuctions in the XML DB Developer's guide.
What is actually happening here is that the PARSER is hard wired to always check is a document that contains an noNamespaceSchemaLocation or schemaLocation tag is associated with an XML Schema that has been registered with Oracle XML DB. If is is, special action is takem, if it isn't then no special action is taken. Unfortunately for various arcane technical reasons if the the XDB repository is not present the check fails totally. Even if we fixed this bug, which has been marked not feasible to fix in the past, there are many other issues with the inbuilt XML technology having dependancies on the presence of the XML DB repository and XDB database user.
So the net/net is don't use XMLType or any XML related features in 9.2.x or later unless XML DB is installed. It is extremenly likely at this point in time that XML DB will become a mandatory component of the next release of the database. At that point you will no longer have an option. It will be automatically installed when a database is created or updated and there will be no way of un-installing it.

Errors when inserting and updating form using VIEW.

Here's my view:
CREATE OR REPLACE FORCE
VIEW "SH_ADD_EMPLOYEES_VW" ("EMP_ID", "DEPT_ID", "JOB_DESC_ID", "EMPNO", "EMP_FIRST", "EMP_LAST", "USER_NAME", "USER_INI", "DEPTNO", "DEPT_DESC", "ROLES_ID", "ADMIN", "CREATES", "APPROVES", "QUALITY", "CUST_SVC", "SH_LOCAL",
"SH_OFFICE", "SYSTEM")
AS
select
"SH_EMPLOYEES"."EMP_ID" as "EMP_ID",
"SH_EMPLOYEES"."DEPT_ID" as "DEPT_ID",
"SH_EMPLOYEES"."JOB_DESC_ID" as "JOB_DESC_ID",
"SH_EMPLOYEES"."EMPNO" as "EMPNO",
"SH_EMPLOYEES"."EMP_FIRST" as "EMP_FIRST",
"SH_EMPLOYEES"."EMP_LAST" as "EMP_LAST",
"SH_EMPLOYEES"."USER_NAME" as "USER_NAME",
"SH_EMPLOYEES"."USER_INI" as "USER_INI",
"SH_EMPLOYEES"."DEPTNO" as "DEPTNO",
"SH_EMPLOYEES"."DEPT_DESC" as "DEPT_DESC",
"DOC_ROLES"."ROLES_ID" as "ROLES_ID",
"DOC_ROLES"."ADMIN" as "ADMIN",
"DOC_ROLES"."CREATES" as "CREATES",
"DOC_ROLES"."APPROVES" as "APPROVES",
"DOC_ROLES"."QUALITY" as "QUALITY",
"DOC_ROLES"."CUST_SVC" as "CUST_SVC",
"DOC_ROLES"."SH_LOCAL" as "SH_LOCAL",
"DOC_ROLES"."SH_OFFICE" as "SH_OFFICE",
"DOC_ROLES"."SYSTEM" as "SYSTEM"
FROM "SH_EMPLOYEES" "SH_EMPLOYEES", "DOC_ROLES" "DOC_ROLES"
where "SH_EMPLOYEES"."EMP_ID" = "DOC_ROLES"."EMP_ID"
Here's my trigger (note - I am not using the EXCEPTION clause or (declaration of it) because it throws an error on msg=>: 'This is my message.' Any help here would be great as well.)
CREATE OR REPLACE TRIGGER bi_ADD_EMPLOYEES_VW
INSTEAD OF insert ON SH_ADD_EMPLOYEES_vw
for each row
declare
duplicate_info EXCEPTION;
PRAGMA EXCEPTION_INIT(duplicate_info, -00001);
begin
insert into SH_EMPLOYEES
(EMP_ID, DEPT_ID, JOB_DESC_ID, EMPNO, EMP_FIRST, EMP_LAST, USER_NAME, USER_INI, DEPTNO, DEPT_DESC)
values
(:new.EMP_ID, :new.DEPT_ID, :new.JOB_DESC_ID, :new.EMPNO, :new.EMP_FIRST, :new.EMP_LAST, :new.USER_NAME, :new.USER_INI, :new.DEPTNO, :new.DEPT_DESC);
insert into DOC_ROLES
(ROLES_ID, ADMIN, CREATES, APPROVES, QUALITY, CUST_SVC, SH_LOCAL, SH_OFFICE, SYSTEM)
VALUES (
:new.ROLES_ID, :new.ADMIN, :new.CREATES, :new.APPROVES, :new.QUALITY, :new.CUST_SVC, :new.SH_LOCAL, :new.SH_OFFICE, :new.SYSTEM);
EXCEPTION
WHEN duplicate_info THEN
RAISE_APPLICATION_ERROR (
num=> -20107
msg=> 'Duplicate employee');
END bi_ADD_EMPLOYEES_VW;
ERROR ON UPDATE:
ORA-20505: Error in DML: p_rowid=1001,
p_alt_rowid=EMP_ID, p_rowid2=2, p_alt_rowid2=ROLES_ID. ORA-01779: cannot modify
a column which maps to a non key-preserved table
ERROR ON INSERT:
ORA-01400: cannot insert NULL into
("SPICE_HUNTER1"."SH_EMPLOYEES"."EMP_ID") ORA-06512: at
"SPICE_HUNTER1.BI_SH_ADD_EMPLOYEES_VW", line 3 ORA-04088: error during execution
of trigger 'SPICE_HUNTER1.BI_SH_ADD_EMPLOYEES_VW' ORA-06512: at
"SYS.WWV_DBMS_SQL", line 549 ORA-06512: at "APEX_040000.WWV_FLOW_DML", line 1121
ORA-22816: unsupported feature with RETURNING clause
Error Unable to process row on table SH_ADD_EMPLOYEES_VW

From what I see you are not handling emp_id when it is null.. you need to assign it a value when null from sequence.. that column cannot be null, hence the error, and in order to "modify" a column in that table the DML needs that id to have a value.

Error when inserting into dynamically created filename-file

Howry
Am am receiving the following error when i am trying to insert into a file that have a dynamic filename (through declared variable, as date etc.).
I presume it is trying to look for the target file with the same name as the dynamic value passed through by the variable, but cannot find it- can anyone tell me how i can rather create the file as appose to insert into an already created file..?
Your help in this regard is much appreciated.
Here is the error:
ODI-1217: Session SAPO_hlr_suburbs (1577001) fails with return code 7000.
ODI-1226: Step 6_Ins_final fails after 1 attempt(s).
ODI-1240: Flow 6_Ins_final fails while performing a Integration operation. This flow loads target table #l_date.unl.
ODI-1228: Task 6_Ins_final (Integration) fails on the target FILE connection SAPO_HLR_SUBURBS.
Caused By: java.sql.SQLException: File C:\Files\Gero work\ODI In Files\SAPO_HLR_SUBURBS/2012-01-24 12:06:13.463.unl was not found
     at com.sunopsis.jdbc.driver.file.FileConnection.prepareForWriting(FileConnection.java:339)
     at com.sunopsis.jdbc.driver.file.impl.commands.CommandInsert.execute(CommandInsert.java:50)
     at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
     at com.sunopsis.jdbc.driver.file.FilePreparedStatement.executeUpdate(FilePreparedStatement.java:138)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeUpdate(SnpSessTaskSql.java:3218)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java:1785)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2805)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:68)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:619)

What operating system are you using?
The name of your file has the time within it , you cant have a filename with ':' in it on Windows.
Try using ALPHANUMERIC datatype for the variable and pull the current datetime as a char with something like :
select to_char( sysdate ,'YYYY-MM_DD HHMISS') from dual

Error when inserting a new record (Ctrl+Down)

Hello,
[http://img402.imageshack.us/my.php?image=12846351.jpg]
Here the problem is : when i press Ctrl+Down (Insert new record), i enter data into all those fields, but i got an error
Cannot Insert Record ("ROGER"."NUME") cannot be null (roger is my username which i logged on). And i completed all fields
Also, when inserting data into fields, when i click on another field, it points me back automatically to the last completed field, then when i click again on the next field, i can enter data in that field. why the cursor cannot be on the next field when i first click there?
i changed the property of the items Required = No (but however, in the database cannot be null).
Please help if you can.
Thanks

For your other issue, with null fields on your forms.
have you ever tried to log those fields value into a log table?
A better and simple idea is:
Create a temp table, with four columns: seq, section, message, type
Where section is the column to condition any search you want to make
message is the column to write anything you want
type is the column which holds the tpe of the record, like info, debug, warn, etc.
then create a database procedure
this procedure must recieve the section, message, type and insert them into the log table and do commit.
in yiour pre-insert trigger [forms level] or in your when-button-pressed or even better on your on-commit trigger [forms level]
write the following code:
begin
database_procdure('MY_FORM_NAME', 'THE VALUES ARE: 1='||:1||' 2='||:2||' 3='||:3, 'INFO');
end;
After that you can do a select in your sql*plus with the following statement:
select *
from temp_table
where selction like 'MY_FORM_NAME';
then you can track if any of the values you think is null or has a value, in fact, has a value.
best regards,
Abdel Miranda
AEMS Global Group
Panama

Error when inserting file 4KB in a BLOB column.

Hello,
I am getting the following error when I am trying to insert a file > 4KB in a
BLOB column.
ORA-01461: can bind a LONG value only for insert into a LONG column.
We are using Weblogic5.1.0 sp10, Oracle 8.0.5 with WL OCI driver.
There is no change even after setting the following property weblogic.oci.min_bind_size=660
Please can anyone help?
Thanks.

Hello,
I tried using the following sql stmts to override the NLS_LANG setting on both
server and client for a session.
ALTER SESSION SET NLS_LANGUAGE = AMERICAN;
ALTER SESSION SET NLS_TERRITORY = AMERICA;
It still gave the same error.
I tried the same using Oracle thin driver.Even then the same problem.
As I mentioned earlier, we are using oracle 8.0.5.
and here is the code I am using for writing BLOB data
java.sql.PreparedStatement prepstmt = conn.prepareStatement("Update TEST_BLOB
set BLOBATTACH = ? where IDX =1");
ByteArrayOutputStream ostream = new ByteArrayOutputStream();
ObjectOutputStream p = new ObjectOutputStream(ostream);
p.writeObject(data);
prepstmt.setBinaryStream(1, new ByteArrayInputStream(ostream.toByteArray()), ostream.size());
prepstmt.executeUpdate();
prepstmt.close();
Any suggestions ?
Thanks.
"Slava Imeshev" <[email protected]> wrote:
Latha,
You need to make sure you have the same NLS_LANG setting both for the
client
and the server.
Regards,
Slava Imeshev
"Latha Pusapaty" <[email protected]> wrote in message
news:[email protected]...
I Tried that. But still getting the same exception.
java.sql.SQLException: ORA-01461: can bind a LONG value only for insertinto a
LONG column
at weblogic.db.oci.OciCursor.getCDAException(OciCursor.java:230)
at weblogic.jdbcbase.oci.Statement.executeUpdate(Statement.java:980)
atweblogic.jdbc20.pool.PreparedStatement.executeUpdate(PreparedStatement.java:
47)
atweblogic.jdbc20.rmi.internal.PreparedStatementImpl.executeUpdate(PreparedSta
tementImpl.java:54)
atweblogic.jdbc20.rmi.SerialPreparedStatement.executeUpdate(SerialPreparedStat
ement.java:55)
at fictx.TRServlet.doPost(TRServlet.java, Compiled Code)
at javax.servlet.http.HttpServlet.service(HttpServlet.java, CompiledCode)
at javax.servlet.http.HttpServlet.service(HttpServlet.java, CompiledCode)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
Compiled Code)
atweblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java,
Compiled Code)
atweblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java,
Compiled Code)
atweblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
Manager.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java,Compiled
Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,Compiled
Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Same code is working fine for files less than 4000 bytes.
Oracle table has only one BLOB column.
I have set weblogic.oci.selectBlobChunkSize=1200 .
Where could be the problem?
Andreas Bittorf <[email protected]> wrote:
We resolved the problem as following:
ps = con.prepareStatement
("update tq_businessmodel set
businessmodel=?,lastupdate=?
"WHERE taskid=?");
ByteArrayOutputStream ostream = new ByteArrayOutputStream();
ObjectOutputStream p = new ObjectOutputStream(ostream);
p.writeObject(businessModel);
ps.setBinaryStream(1, newByteArrayInputStream(ostream.toByteArray()),
ostream.size());
ps.setTimestamp(2,new Timestamp(System.currentTimeMillis()));
ps.setLong(3,taskid);
ps.executeUpdate();

Error when inserting install disc

Similar Messages

Maybe you are looking for