Error when inserting into dynamically created filename-file

Howry
Am am receiving the following error when i am trying to insert into a file that have a dynamic filename (through declared variable, as date etc.).
I presume it is trying to look for the target file with the same name as the dynamic value passed through by the variable, but cannot find it- can anyone tell me how i can rather create the file as appose to insert into an already created file..?
Your help in this regard is much appreciated.
Here is the error:
ODI-1217: Session SAPO_hlr_suburbs (1577001) fails with return code 7000.
ODI-1226: Step 6_Ins_final fails after 1 attempt(s).
ODI-1240: Flow 6_Ins_final fails while performing a Integration operation. This flow loads target table #l_date.unl.
ODI-1228: Task 6_Ins_final (Integration) fails on the target FILE connection SAPO_HLR_SUBURBS.
Caused By: java.sql.SQLException: File C:\Files\Gero work\ODI In Files\SAPO_HLR_SUBURBS/2012-01-24 12:06:13.463.unl was not found
     at com.sunopsis.jdbc.driver.file.FileConnection.prepareForWriting(FileConnection.java:339)
     at com.sunopsis.jdbc.driver.file.impl.commands.CommandInsert.execute(CommandInsert.java:50)
     at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
     at com.sunopsis.jdbc.driver.file.FilePreparedStatement.executeUpdate(FilePreparedStatement.java:138)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeUpdate(SnpSessTaskSql.java:3218)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java:1785)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2805)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:68)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:619)

What operating system are you using?
The name of your file has the time within it , you cant have a filename with ':' in it on Windows.
Try using ALPHANUMERIC datatype for the variable and pull the current datetime as a char with something like :
select to_char( sysdate ,'YYYY-MM_DD HHMISS') from dual

Similar Messages

Error when inserting into table - Undefined Variable

DB = Oracle 10.2.0.1
WEBSERV = Apache 2.0.55
LANG = PHP5
I have created (or more accurately, copied) a php script to insert data into one of my database tables when I press submit. The code is as follows (my connect string works fine and its included in the dbutils.php file):
<?php
if($submit == "submit"){
include "dbutils.php";
$query = "insert into users values (seq_user_usr_id.NEXTVAL, '$usr_name')";
$cursor = OCIParse ($db_conn, $query);
if ($cursor == false){
    echo OCIError($cursor)."<BR>";
    exit;
$result = OCIExecute ($cursor);
if ($result == false){
    echo OCIError($cursor)."<BR>";
    exit;
OCICommit ($db_conn);
OCILogoff ($db_conn);
else{
   echo '
    <html><body>
    <form method="post" action="index.php">
<table width="400" border="0" cellspacing="0" cellpadding="0">
<tr>
    <td>Please enter a username:</td>
    <td><input type="text" name="usr_name"></input><br></td>
</tr>
<tr>
    <td><input type="submit" name="button" value="Submit"></input></td>
</tr>
</table>
    </form>
    </body></html>
?></p>I am getting the following error regarding an undefined variable:
[Fri Jan 20 13:11:22 2006] [error] [client 127.0.0.1] PHP Notice: Undefined variable: submit in C:\\Program Files\\Apache Group\\Apache2\\htdocs\\mywebsite\\test.php on line 3
Where would I declare this variable? It is just a check to see if the submit button is pressed as far as I can see. Any help would be greatfully appreciated.
W8

I have changed the code to this:
<?php
if($submit == "submit"){
include "dbutils.php";
$usr_name = $_POST['usr_name'];
$query = "insert into users (column1, column2) values (seq_user_usr_id.NEXTVAL, '$usr_name')";
$cursor = OCIParse ($db_conn, $query);
if ($cursor == false){
echo OCIError($cursor)."
exit;
$result = OCIExecute ($cursor);
if ($result == false){
echo OCIError($cursor)."
exit;
OCICommit ($db_conn);
OCILogoff ($db_conn);
else{
$submit = $_POST['submit'];
echo '
<html><body>
<form method="post" action="index.php">
<table width="400" border="0" cellspacing="0" cellpadding="0">
<tr>
<td>Please enter a username:</td>
<td><input type="text" name="usr_name"></input>
</td>
</tr>
<tr>
<td><input type="submit" name="submit" value="submit"></input></td>
</tr>
</table>
</form>
</body></html>
?>And now I am getting the following error:
[Mon Jan 23 13:45:32 2006] [error] [client 127.0.0.1] PHP Notice: Undefined index: submit in C:\\Program Files\\Apache Group\\Apache2\\htdocs\\mywebsite\\test2.php on line 24Does anyone have any ideas?
I am struggling to find an example to work from to get this working. If anyone can point me to any literature that will explain the code so that I can work this out for myself that would also be a great help.

Inconsistent datatypes error when inserting into a object

I am trying to insert some test data into the table emp.I have managed to succesfully create the objects and types but when I try to insert into the emp table I get a inconsistent datatypes error however I have checked the datatypes and they all seem fine. Can anyone help me.
thanks
CREATE OR REPLACE TYPE Address_T AS object
(ADDR1                VC2_40,
ADDR2               VC2_40,
CITY_TX          VC2_40,
COUNTY_CD          VC2_40,
POST_CD          VC2_40);
CREATE OR REPLACE TYPE PERSON_T AS OBJECT (
LNAME_TX           NAME_T,
FNAME_TX           NAME_T,
BIRTH_DATE          DATE,
TELEPHONE          VC2_20,
EMAIL               VC2_40);
CREATE OR REPLACE TYPE EMP_T AS OBJECT (
EMP_ID     NUMBER (10),
PERSON     PERSON_T,
ADDRESS ADDRESS_T,
HIRE_DATE DATE)
CREATE TABLE EMP OF EMP_T
(EMP_ID NOT NULL PRIMARY KEY);
INSERT INTO EMP VALUES (1,
PERSON_T('PETCH',
'GAVIN',
'23-JAN-80',
'(01964)550700',
'[email protected]'),
ADDRESS_T('67 CANADA',
'WALKINGTON',
'BEVERLEY',
'EAST YORKSHIRE',
'HU17 7RL'),
'11-FEB-02'
ERROR at line 1:
ORA-00932: inconsistent datatypes

Gavin,
What is your VC2_40 and NAME_T type definition? Your insert used these as varchar2, which is a built-in type not a user-defined type. If you explicitly define these to be varchar2's, the insert statement works fine.
Regards,
Geoff
I am trying to insert some test data into the table emp.I have managed to succesfully create the objects and types but when I try to insert into the emp table I get a inconsistent datatypes error however I have checked the datatypes and they all seem fine. Can anyone help me.
thanks
CREATE OR REPLACE TYPE Address_T AS object
(ADDR1                VC2_40,
ADDR2               VC2_40,
CITY_TX          VC2_40,
COUNTY_CD          VC2_40,
POST_CD          VC2_40);
CREATE OR REPLACE TYPE PERSON_T AS OBJECT (
LNAME_TX           NAME_T,
FNAME_TX           NAME_T,
BIRTH_DATE          DATE,
TELEPHONE          VC2_20,
EMAIL               VC2_40);
CREATE OR REPLACE TYPE EMP_T AS OBJECT (
EMP_ID     NUMBER (10),
PERSON     PERSON_T,
ADDRESS ADDRESS_T,
HIRE_DATE DATE)
CREATE TABLE EMP OF EMP_T
(EMP_ID NOT NULL PRIMARY KEY);
INSERT INTO EMP VALUES (1,
PERSON_T('PETCH',
'GAVIN',
'23-JAN-80',
'(01964)550700',
'[email protected]'),
ADDRESS_T('67 CANADA',
'WALKINGTON',
'BEVERLEY',
'EAST YORKSHIRE',
'HU17 7RL'),
'11-FEB-02'
ERROR at line 1:
ORA-00932: inconsistent datatypes

ORA-06502: error when inserting into table via db link with long datatype

Folks,
I am getting the following error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small.
This occurs when an insert is done via a database link into a table that has a LONG data type for one of the columns, and the string contains some carriage returns and or line feeds.
I have checked by removing the db link, and inserting into a local table with identical column data types, where there is no error.
So this might be another db link bug?
So I need to remove the carriage returns and/or line feeds
in my pl/sql block in the page process. I have tried
l_text := REPLACE(l_text, CHR(10), ' ');
l_text := REPLACE(l_text, CHR(13), NULL);
but still getting the ORA-06502. Would really appreciate some advice here, please.
Cheers
KIM

Scott,
Time to 'fess up':
My fault sorry, the error was coming from another page process where I had allowed insufficient string length for one of the variables, and my error message did not identify the page process clearly.
This leads me to make a request for future releases, could the system error messages state which page process caused the problem?
One other thing I notice, and this might be a feature not a fault, the page processes are numbered: "Page Process: 3 of 5". However process 3 is not the 3rd one to be processed, and probably refers to the order in which they are created. Should the number reflect the process order?
Cheers
KIM

Error when inserting into a table

Hi,
I am running this insert stmt
SQL> insert into cntct select * from CUSTSRV_ADMN.cntct_bk1;
ERROR at line 1:
ORA-01733: virtual column not allowed here
Below is the table structure.
SQL> desc cntct;
Name Null? Type
CNTCT_KEY NOT NULL NUMBER(10)
CNTCT_NUM NOT NULL CHAR(12)
SRC_SYS_DESC NOT NULL VARCHAR2(5)
ACTVTY_DT NOT NULL DATE
CNTCT_TYPE_DESC NOT NULL VARCHAR2(15)
CNTCT_INIATR_CD NOT NULL CHAR(1)
CNTCT_INIATR_DESC NOT NULL VARCHAR2(10)
CNTCT_INIATR_NAME NOT NULL VARCHAR2(30)
CNTCT_INIATR_PHONE_NUM VARCHAR2
CNTCT_STUS_CD NOT NULL CHAR(1)
CNTCT_STUS_DESC NOT NULL VARCHAR2(10)
CNTCT_AGE_DAYS_CNT NOT NULL NUMBER(4)
CNTCT_ELPSD_TIME_SEC_CNT NOT NULL NUMBER(10)
CNTCT_RCVD_DT NOT NULL DATE
CNTCT_OPEN_DT NOT NULL DATE
CNTCT_RSLTN_DT NOT NULL DATE
CNTCT_NEW_IND NOT NULL CHAR(1)
HIGHST_NMIS_CD NOT NULL NUMBER(1)
INIATNG_AGENT_KEY NOT NULL NUMBER(5)
CLSNG_AGENT_KEY NOT NULL NUMBER(5)
CNTCT_ID NOT NULL VARCHAR2(20)
IMG_NUM NOT NULL VARCHAR2(13)
PRVDR_NPI NOT NULL VARCHAR2(10)
PRVDR_TIN NOT NULL VARCHAR2(9)
CNTCT_OPEN_DTIME NOT NULL DATE
CNTCT_RSLTN_DTIME NOT NULL DATE
Please advise.
Regards,
Narayan

No its another table.
I also tried using columns instead of '*'
SQL> insert into cntct
2 select CNTCT_KEY,
3 CNTCT_NUM,
4 SRC_SYS_DESC,
5 ACTVTY_DT,
6 CNTCT_TYPE_DESC,
7 CNTCT_INIATR_CD,
8 CNTCT_INIATR_DESC,
9 CNTCT_INIATR_NAME,
10 CNTCT_INIATR_PHONE_NUM,
11 CNTCT_STUS_CD,
12 CNTCT_STUS_DESC,
13 CNTCT_AGE_DAYS_CNT,
14 CNTCT_ELPSD_TIME_SEC_CNT,
15 CNTCT_RCVD_DT,
16 CNTCT_OPEN_DT,
17 CNTCT_RSLTN_DT,
18 CNTCT_NEW_IND,
19 HIGHST_NMIS_CD,
20 INIATNG_AGENT_KEY,
21 CLSNG_AGENT_KEY,
22 CNTCT_ID,
23 IMG_NUM,
24 PRVDR_NPI,
25 PRVDR_TIN,
26 CNTCT_OPEN_DTIME,
27 CNTCT_RSLTN_DTIME
28 from CUSTSRV_ADMN.cntct_bk1;
Still have the same error.
insert into cntct
ERROR at line 1:
ORA-01733: virtual column not allowed here
Please advise.
Regards,
Narayan

Timeout expired error when inserting into a mirrored server

We have 3 SQL Server 2012 servers.
All 3 SQL Server has the same database, ie myDB.
In 2 of the servers (say server A and B), myDB is mirrored, and on the 3rd server myDb is NOT mirrored.
When the program calls a stored procedure to insert a record into a table in the database, on the mirrored servers (server A and B) sometimes it takes up to 7 seconds and gave an error "Timeout expired. The timeout period elapsed prior
to completion of the operation or the server is not responding. This failure occured while attempting to connect to the Principle server." This doesn't happen all the time, but happens often enough throughout the day.
The 3rd server (that is NOT mirrored) never gives this Timout expired error.
Will mirrored server cause slowness in writing, thus causes the Timeout expired error ?
Thank you.

Since we can live with some missing data, I think we should use asynchronous mirroring instead of synchronous, do you agree ?
That may be an options, provided that you are on Enterprise Edition. As I recall, Standard Edition only has synchronhous mirroring.
There are caveats with asynchronous mirroring. One is data loss in case of a failover, which you say that you can live with. There may be more caveats, though. Unfortunately, since my role is more of a developer than a DBA, I'm not too well versed in
the details. Maybe someone else can fill in?
Can a firewall issue cause mirror latency, that in turn causes the delay in writing to the principal database ?
Firewalls and other network hiccups certainly can cause a latency.
Erland Sommarskog, SQL Server MVP, [email protected]

Error when inserting into a internal table

hello.
I get the fowolling error.
An exception occurred that is explained in detail below.
The exception, which is assigned to class 'CX_SY_OPEN_SQL_DB', was not caught
and
therefore caused a runtime error.
The reason for the exception is:
In a SELECT access, the read file could not be placed in the target
field provided.
Either the conversion is not supported for the type of the target field,
the target field is too small to include the value, or the data does not
have the format required for the target field.
I did a join of 5 table and it is inseting into an interal table wich tpye is al the fields that i am pulling from the other tables. can someone please help. thanks

Performance wise its not suggested to use CORRESPONDING FIELDS so better take care of the fields u are selecting into table by having the structure of internal table exactly like the fields u are selecting, in the same order.
ex:
types: begin of ty_vbap,
           vbeln type vbeln,
           posnr type posnr,
          end of ty_vbap.
data: it_vbap type standard table of ty_vbap.
select vbeln posnr into table it_vbap from vbap where ...
кu03B1ятu03B9к

" Error when inserting in PSA table RSTSODSPART" when loading into PSA

Hello,
Did anyone encounter something similar, and found a solution ?
BI 7.0 - EnhP 1 - SP5
When loading data from R/3 into PSA, we encounter following error message:
" Error when inserting in PSA table RSTSODSPART"
===============================================================
- the first datapackage is written successfully to PSA,
but from the second datapackage onwards the error message pops-up
" Error when inserting in PSA table RSTSODSPART"
- The original dataselection in the infopackage is somewhere stored
If the selection in the InfoPackage is reduced (e.g. only one document i.o. a period)
it stil starts loading according the original selection (the month)
- If we create a new InfoPackage and select very few data (only one datapackage)
then we can load to PSA succesfully, but when we load to DSO we can't activate the DSO.
- We remarked that:
Two versions of the PSA exist for that datasource 0FI_GL_40:
a Table(/BIC/B0000555000) in version 1 exists,
a Table(/BIC/B0000555001) in version 2 exists
Thanks in advance,
Best regards

Hello All,
We had a problem similar to what Ilse Depoortere describes. The problem happens in our BW QA system a few days/weeks after it has been copied from Production. Data loads start failing with these two error messages:
RSM2 851 - Error when writing in PSA (Caller 32)
RSAR 130 - Error 7 when adding to PSA (Caller 70)
We have just implemented the fix described in note 1340371 (replaced the LIB_DBSL with patch level 247), and the problem is gone. Failed data load process chains can be restarted and finish successfully.
This has been a really useful discussion, thanks all! And thanks to my coworker Bob who found it.
Vince Vajda

When I try to save a new file from numbers, I'm given the error of it can't create a file. why would that be?

when I try to save a new file from numbers, I'm given the error of it can't create a file. why would that be?

Try using /Applications/Utilities/Disk Utility to repair file permissions.
Bob

I keep getting write errors (-50) when I try to create new files or folders on my Gen 5 Airport Extreme USB disk.

Write errors (-50) when I try to create new files or folders on my Airport Extreme USB disk. Restarting the Airport Extreme seems to solve the issue. Any idea why this occurring? It doesn't seem to be OS specific, meaning I can't write to the drive from a Windows PC or a MacBook Pro.

Although, I would consider it rare, it is quite possible that this drive is just not 100% compatible with the AirPorts. Typically, in these cases, the AirPort will not even recognize the drive at all ... or it will, but not allow you to access it. I actually haven't come across a case where you can read but not write to a drive consistently or vice versa ... except from Windows-based computers. Sorry!

Error 7 occurred at open/create/replace file

Hello,
I have searched the forum and could not find any useful information regarding my problem, so hope you may shed some light. MyVI can create a new csv (text) file by using the time to name the file, so every time the new file will be created with a different name and file path is not a relative path. I can run the VI in both development environment and stand along executable without any problem. But,
One of my colleagues cannot run the executable exe on her machine because Error 7 occurred at Open/Create/Replace File in xxxx.vi Possible reason: LabVIEW: File not found. The file might be in a different location or deleted. Use the command prompt or the file explorer to verify that the path is correct.
My question is why only she cannot run this exe on her machine. I have checked a few different PC in my office and all of them can run this exe without problem, so I am pretty sure the code is fine.
I have already ask her to do,
Run the executable as administrator
Save the new file to other drives (not C: drive)
but she still cannot run the executable. I dont think this is a premission issue, otherwise, LabVIEW would give a different error, Error 8 I believe.
Both her PC and my PC is running Windows 7 professional 64-bit. The only difference I can see is that she is based in US and I am based Australia. Does anyone have any idea? Please help.
Thanks,
Sherman

I’m not sure but expecting like below,
As you said, your creating file name with Time. Make sure file name is correct and there is no special characters (like, / or : ). If your formatting time to string with “Format Date/Time String.vi” (while creating file name), based on UTC format, string will change.
UTC format specifies if the output string is in Universal Time or in the configured time zone for the computer. If TRUE, date/time string is in Universal Time. The default is FALSE.
Make sure you have access rights to create files into mentioned folder. Try to create new file manually.
Munna

Error 5 occurred at Open/Create/Replace File in Write spreadsheet String.vi

Hi everyone,
can anyone help me with this problem?
"error 5 occurred at Open/Create/Replace File in Write spreadsheet String.vi "
I've been using this part of the program for over a year an suddenly this error occures. But not always, mainly at the very beginning of my tests when the file should not be open.
Info: I'm using a realtime PXI-System. Maybe the amount of data can cause the problem? (about 2MB)
Grüße
Meike
Attachments:
writeResults.jpg ‏345 KB
error5.jpg ‏52 KB

Hi Meike,
is the file opened by a different program? Do you try to access it by FTP in parallel to your VI?
You could use basic file functions instead of WriteSpreadsheetFile. That way you could open the file before starting the loop, keep it open all the time and close it once you're finished - with the added benefit of easier error handling…
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Error when inserting or changing in a sorted table

Hi Experts,
When i am executing a webdynpro application it says Error when inserting or changing in a sorted table. Can any one help for this.
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_COMPONENTCONTROLLER~GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: WDDOMODIFYVIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
in ST22
Object Definition
DATA: lo_node                   TYPE REF TO if_wd_context_node,
        lo_node_info              TYPE REF TO if_wd_context_node_info,
        lo_element                TYPE REF TO if_wd_context_element.
Additional Data declarations
DATA: lv_key TYPE string.
Get context node.
lo_node = wd_context->get_child_node( name = 'DROPDOWNLISTS' ).
lo_node_info = lo_node->get_node_info( ).
Call method to fetch the categories.
CALL METHOD cl_hap_wd_start_page_ui=>category_get_list
    EXPORTING
      add_on_application = add_on_application
    IMPORTING
      t_categories       = lt_categories.
Append Default selection entry 'All'.
lw_category-category_id = '00000000'.
lw_category-category_name = 'All'.
APPEND lw_category TO lt_categories.
Sort table after appending the new entry.
SORT lt_categories ASCENDING.
Loop through the category list and populate key(category_id) value(category_name) pair for
LOOP AT lt_categories INTO lw_category.
    lw_key_value-key = lw_category-category_id.
625     lw_key_value-value = lw_category-category_name.
>>>>>     APPEND lw_key_value TO lt_key_values.------>Here it throws an error
627     CLEAR: lw_key_value, lw_category.
628   ENDLOOP.
629
630 * Bind the category key-value pair to the context attribute.
631   CALL METHOD lo_node_info->set_attribute_value_set
632     EXPORTING
633       name      = 'CATEGORY_LIST'
634       value_set = lt_key_values.
635
636 * Make the entry 'All' as default selected.
637   CALL METHOD lo_node->set_attribute
638     EXPORTING
639       value = '00000000'
640       name = 'CATEGORY_LIST'.
641
642 ENDMETHOD.
643
644 method GET_EMPLOYEES.
645

Hello Durga,
from the error what I understood is lt_key_values is a sorted table and you are trying append a new line to it. Incase of sorted table you need to use the INSERT statement and not the APPEND statement.
INSERT lw_key_value INTO table lt_key_values.
BR, Saravanan

Error when inserting Web Dynpro script in Adobe form

Hi
In my WD component in one of the view I have an ADOBE form (Online scenario) and a button to save data into backend. In the ADOBE form everything is working properly, however the problem is when I click on the button to save, Its not getting into my action code. Even I am not getting any error other than the wait symbol.
In the form I have taken ZCI layout but when i'm inserting Webdynpro Script its showing an error 'Error when inserting Web Dynpro script'.
Please let me know why this error is getting.
Thanks
Ram

Hi Ram,
I hope you help me,
I have the same error, when I insert a web Dynrp Script, what version of SAPGUI do you use?
Thanks

Error when inserting Web Dynpro script

Hello,
I am trying to create a new form using fields from KNA1 and am using ISR controls. When I try to insert Webdynpro scripts i get message "Error when inserting Web Dynpro script" Message no. FPUIFB094.
Has anyone faced this error? no notes are available regarding this and in SDN.
Regards
Prasad

It must be atleast ALD 7.1. Check this [Thread|Re: Problem on Button; having the same issue. Also check the SAPNOTE 962763.

Error when inserting into dynamically created filename-file

Similar Messages

Maybe you are looking for