Error when inserting transistion
I'm a new user to Final Cut X and every time I attempt to insert a tranistion, an error message comes up saying there is not enough clip to create the transistion without shortening the project. This never happened when using iMovie. What is going on?
chenderson22 wrote:
… In fact, I really find Final Cut to be quite akward to work with - much less intuitive than iMovie.
that's why it's called final cut PRO x' - you have to understand the concept of editing.
spend some hours reading the Manual
http://help.apple.com/finalcutpro/mac/10.0.6/
when you open a transition in the Precision Editor, you'd see what is meant with 'handles': additional clip material (here the red arrows point to it) beyond the edit point, which allows the transition.
.... there are tons of good books and tutorials avail, just google it.-
Similar Messages
-
Error when inserting or changing in a sorted table
Hi Experts,
When i am executing a webdynpro application it says Error when inserting or changing in a sorted table. Can any one help for this.
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_COMPONENTCONTROLLER~GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: WDDOMODIFYVIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
in ST22
Object Definition
DATA: lo_node TYPE REF TO if_wd_context_node,
lo_node_info TYPE REF TO if_wd_context_node_info,
lo_element TYPE REF TO if_wd_context_element.
Additional Data declarations
DATA: lv_key TYPE string.
Get context node.
lo_node = wd_context->get_child_node( name = 'DROPDOWNLISTS' ).
lo_node_info = lo_node->get_node_info( ).
Call method to fetch the categories.
CALL METHOD cl_hap_wd_start_page_ui=>category_get_list
EXPORTING
add_on_application = add_on_application
IMPORTING
t_categories = lt_categories.
Append Default selection entry 'All'.
lw_category-category_id = '00000000'.
lw_category-category_name = 'All'.
APPEND lw_category TO lt_categories.
Sort table after appending the new entry.
SORT lt_categories ASCENDING.
Loop through the category list and populate key(category_id) value(category_name) pair for
LOOP AT lt_categories INTO lw_category.
lw_key_value-key = lw_category-category_id.
625 lw_key_value-value = lw_category-category_name.
>>>>> APPEND lw_key_value TO lt_key_values.------>Here it throws an error
627 CLEAR: lw_key_value, lw_category.
628 ENDLOOP.
629
630 * Bind the category key-value pair to the context attribute.
631 CALL METHOD lo_node_info->set_attribute_value_set
632 EXPORTING
633 name = 'CATEGORY_LIST'
634 value_set = lt_key_values.
635
636 * Make the entry 'All' as default selected.
637 CALL METHOD lo_node->set_attribute
638 EXPORTING
639 value = '00000000'
640 name = 'CATEGORY_LIST'.
641
642 ENDMETHOD.
643
644 method GET_EMPLOYEES.
645Hello Durga,
from the error what I understood is lt_key_values is a sorted table and you are trying append a new line to it. Incase of sorted table you need to use the INSERT statement and not the APPEND statement.
INSERT lw_key_value INTO table lt_key_values.
BR, Saravanan -
Error when inserting Web Dynpro script in Adobe form
Hi
In my WD component in one of the view I have an ADOBE form (Online scenario) and a button to save data into backend. In the ADOBE form everything is working properly, however the problem is when I click on the button to save, Its not getting into my action code. Even I am not getting any error other than the wait symbol.
In the form I have taken ZCI layout but when i'm inserting Webdynpro Script its showing an error 'Error when inserting Web Dynpro script'.
Please let me know why this error is getting.
Thanks
RamHi Ram,
I hope you help me,
I have the same error, when I insert a web Dynrp Script, what version of SAPGUI do you use?
Thanks -
Error when inserting Web Dynpro script
Hello,
I am trying to create a new form using fields from KNA1 and am using ISR controls. When I try to insert Webdynpro scripts i get message "Error when inserting Web Dynpro script" Message no. FPUIFB094.
Has anyone faced this error? no notes are available regarding this and in SDN.
Regards
PrasadIt must be atleast ALD 7.1. Check this [Thread|Re: Problem on Button; having the same issue. Also check the SAPNOTE 962763.
-
" Error when inserting in PSA table RSTSODSPART" when loading into PSA
Hello,
Did anyone encounter something similar, and found a solution ?
BI 7.0 - EnhP 1 - SP5
When loading data from R/3 into PSA, we encounter following error message:
" Error when inserting in PSA table RSTSODSPART"
===============================================================
- the first datapackage is written successfully to PSA,
but from the second datapackage onwards the error message pops-up
" Error when inserting in PSA table RSTSODSPART"
- The original dataselection in the infopackage is somewhere stored
If the selection in the InfoPackage is reduced (e.g. only one document i.o. a period)
it stil starts loading according the original selection (the month)
- If we create a new InfoPackage and select very few data (only one datapackage)
then we can load to PSA succesfully, but when we load to DSO we can't activate the DSO.
- We remarked that:
Two versions of the PSA exist for that datasource 0FI_GL_40:
a Table(/BIC/B0000555000) in version 1 exists,
a Table(/BIC/B0000555001) in version 2 exists
Thanks in advance,
Best regardsHello All,
We had a problem similar to what Ilse Depoortere describes. The problem happens in our BW QA system a few days/weeks after it has been copied from Production. Data loads start failing with these two error messages:
RSM2 851 - Error when writing in PSA (Caller 32)
RSAR 130 - Error 7 when adding to PSA (Caller 70)
We have just implemented the fix described in note 1340371 (replaced the LIB_DBSL with patch level 247), and the problem is gone. Failed data load process chains can be restarted and finish successfully.
This has been a really useful discussion, thanks all! And thanks to my coworker Bob who found it.
Vince Vajda -
Errors when inserting and updating form using VIEW.
Here's my view:
CREATE OR REPLACE FORCE
VIEW "SH_ADD_EMPLOYEES_VW" ("EMP_ID", "DEPT_ID", "JOB_DESC_ID", "EMPNO", "EMP_FIRST", "EMP_LAST", "USER_NAME", "USER_INI", "DEPTNO", "DEPT_DESC", "ROLES_ID", "ADMIN", "CREATES", "APPROVES", "QUALITY", "CUST_SVC", "SH_LOCAL",
"SH_OFFICE", "SYSTEM")
AS
select
"SH_EMPLOYEES"."EMP_ID" as "EMP_ID",
"SH_EMPLOYEES"."DEPT_ID" as "DEPT_ID",
"SH_EMPLOYEES"."JOB_DESC_ID" as "JOB_DESC_ID",
"SH_EMPLOYEES"."EMPNO" as "EMPNO",
"SH_EMPLOYEES"."EMP_FIRST" as "EMP_FIRST",
"SH_EMPLOYEES"."EMP_LAST" as "EMP_LAST",
"SH_EMPLOYEES"."USER_NAME" as "USER_NAME",
"SH_EMPLOYEES"."USER_INI" as "USER_INI",
"SH_EMPLOYEES"."DEPTNO" as "DEPTNO",
"SH_EMPLOYEES"."DEPT_DESC" as "DEPT_DESC",
"DOC_ROLES"."ROLES_ID" as "ROLES_ID",
"DOC_ROLES"."ADMIN" as "ADMIN",
"DOC_ROLES"."CREATES" as "CREATES",
"DOC_ROLES"."APPROVES" as "APPROVES",
"DOC_ROLES"."QUALITY" as "QUALITY",
"DOC_ROLES"."CUST_SVC" as "CUST_SVC",
"DOC_ROLES"."SH_LOCAL" as "SH_LOCAL",
"DOC_ROLES"."SH_OFFICE" as "SH_OFFICE",
"DOC_ROLES"."SYSTEM" as "SYSTEM"
FROM "SH_EMPLOYEES" "SH_EMPLOYEES", "DOC_ROLES" "DOC_ROLES"
where "SH_EMPLOYEES"."EMP_ID" = "DOC_ROLES"."EMP_ID"
Here's my trigger (note - I am not using the EXCEPTION clause or (declaration of it) because it throws an error on msg=>: 'This is my message.' Any help here would be great as well.)
CREATE OR REPLACE TRIGGER bi_ADD_EMPLOYEES_VW
INSTEAD OF insert ON SH_ADD_EMPLOYEES_vw
for each row
declare
duplicate_info EXCEPTION;
PRAGMA EXCEPTION_INIT(duplicate_info, -00001);
begin
insert into SH_EMPLOYEES
(EMP_ID, DEPT_ID, JOB_DESC_ID, EMPNO, EMP_FIRST, EMP_LAST, USER_NAME, USER_INI, DEPTNO, DEPT_DESC)
values
(:new.EMP_ID, :new.DEPT_ID, :new.JOB_DESC_ID, :new.EMPNO, :new.EMP_FIRST, :new.EMP_LAST, :new.USER_NAME, :new.USER_INI, :new.DEPTNO, :new.DEPT_DESC);
insert into DOC_ROLES
(ROLES_ID, ADMIN, CREATES, APPROVES, QUALITY, CUST_SVC, SH_LOCAL, SH_OFFICE, SYSTEM)
VALUES (
:new.ROLES_ID, :new.ADMIN, :new.CREATES, :new.APPROVES, :new.QUALITY, :new.CUST_SVC, :new.SH_LOCAL, :new.SH_OFFICE, :new.SYSTEM);
EXCEPTION
WHEN duplicate_info THEN
RAISE_APPLICATION_ERROR (
num=> -20107
msg=> 'Duplicate employee');
END bi_ADD_EMPLOYEES_VW;
ERROR ON UPDATE:
ORA-20505: Error in DML: p_rowid=1001,
p_alt_rowid=EMP_ID, p_rowid2=2, p_alt_rowid2=ROLES_ID. ORA-01779: cannot modify
a column which maps to a non key-preserved table
ERROR ON INSERT:
ORA-01400: cannot insert NULL into
("SPICE_HUNTER1"."SH_EMPLOYEES"."EMP_ID") ORA-06512: at
"SPICE_HUNTER1.BI_SH_ADD_EMPLOYEES_VW", line 3 ORA-04088: error during execution
of trigger 'SPICE_HUNTER1.BI_SH_ADD_EMPLOYEES_VW' ORA-06512: at
"SYS.WWV_DBMS_SQL", line 549 ORA-06512: at "APEX_040000.WWV_FLOW_DML", line 1121
ORA-22816: unsupported feature with RETURNING clause
Error Unable to process row on table SH_ADD_EMPLOYEES_VWFrom what I see you are not handling emp_id when it is null.. you need to assign it a value when null from sequence.. that column cannot be null, hence the error, and in order to "modify" a column in that table the DML needs that id to have a value.
-
Error when inserting into dynamically created filename-file
Howry
Am am receiving the following error when i am trying to insert into a file that have a dynamic filename (through declared variable, as date etc.).
I presume it is trying to look for the target file with the same name as the dynamic value passed through by the variable, but cannot find it- can anyone tell me how i can rather create the file as appose to insert into an already created file..?
Your help in this regard is much appreciated.
Here is the error:
ODI-1217: Session SAPO_hlr_suburbs (1577001) fails with return code 7000.
ODI-1226: Step 6_Ins_final fails after 1 attempt(s).
ODI-1240: Flow 6_Ins_final fails while performing a Integration operation. This flow loads target table #l_date.unl.
ODI-1228: Task 6_Ins_final (Integration) fails on the target FILE connection SAPO_HLR_SUBURBS.
Caused By: java.sql.SQLException: File C:\Files\Gero work\ODI In Files\SAPO_HLR_SUBURBS/2012-01-24 12:06:13.463.unl was not found
at com.sunopsis.jdbc.driver.file.FileConnection.prepareForWriting(FileConnection.java:339)
at com.sunopsis.jdbc.driver.file.impl.commands.CommandInsert.execute(CommandInsert.java:50)
at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
at com.sunopsis.jdbc.driver.file.FilePreparedStatement.executeUpdate(FilePreparedStatement.java:138)
at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeUpdate(SnpSessTaskSql.java:3218)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java:1785)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2805)
at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:68)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:619)What operating system are you using?
The name of your file has the time within it , you cant have a filename with ':' in it on Windows.
Try using ALPHANUMERIC datatype for the variable and pull the current datetime as a char with something like :
select to_char( sysdate ,'YYYY-MM_DD HHMISS') from dual -
Error when inserting a new record (Ctrl+Down)
Hello,
[http://img402.imageshack.us/my.php?image=12846351.jpg]
Here the problem is : when i press Ctrl+Down (Insert new record), i enter data into all those fields, but i got an error
Cannot Insert Record ("ROGER"."NUME") cannot be null (roger is my username which i logged on). And i completed all fields
Also, when inserting data into fields, when i click on another field, it points me back automatically to the last completed field, then when i click again on the next field, i can enter data in that field. why the cursor cannot be on the next field when i first click there?
i changed the property of the items Required = No (but however, in the database cannot be null).
Please help if you can.
ThanksFor your other issue, with null fields on your forms.
have you ever tried to log those fields value into a log table?
A better and simple idea is:
Create a temp table, with four columns: seq, section, message, type
Where section is the column to condition any search you want to make
message is the column to write anything you want
type is the column which holds the tpe of the record, like info, debug, warn, etc.
then create a database procedure
this procedure must recieve the section, message, type and insert them into the log table and do commit.
in yiour pre-insert trigger [forms level] or in your when-button-pressed or even better on your on-commit trigger [forms level]
write the following code:
begin
database_procdure('MY_FORM_NAME', 'THE VALUES ARE: 1='||:1||' 2='||:2||' 3='||:3, 'INFO');
end;
After that you can do a select in your sql*plus with the following statement:
select *
from temp_table
where selction like 'MY_FORM_NAME';
then you can track if any of the values you think is null or has a value, in fact, has a value.
best regards,
Abdel Miranda
AEMS Global Group
Panama -
Error when inserting file 4KB in a BLOB column.
Hello,
I am getting the following error when I am trying to insert a file > 4KB in a
BLOB column.
ORA-01461: can bind a LONG value only for insert into a LONG column.
We are using Weblogic5.1.0 sp10, Oracle 8.0.5 with WL OCI driver.
There is no change even after setting the following property weblogic.oci.min_bind_size=660
Please can anyone help?
Thanks.Hello,
I tried using the following sql stmts to override the NLS_LANG setting on both
server and client for a session.
ALTER SESSION SET NLS_LANGUAGE = AMERICAN;
ALTER SESSION SET NLS_TERRITORY = AMERICA;
It still gave the same error.
I tried the same using Oracle thin driver.Even then the same problem.
As I mentioned earlier, we are using oracle 8.0.5.
and here is the code I am using for writing BLOB data
java.sql.PreparedStatement prepstmt = conn.prepareStatement("Update TEST_BLOB
set BLOBATTACH = ? where IDX =1");
ByteArrayOutputStream ostream = new ByteArrayOutputStream();
ObjectOutputStream p = new ObjectOutputStream(ostream);
p.writeObject(data);
prepstmt.setBinaryStream(1, new ByteArrayInputStream(ostream.toByteArray()), ostream.size());
prepstmt.executeUpdate();
prepstmt.close();
Any suggestions ?
Thanks.
"Slava Imeshev" <[email protected]> wrote:
Latha,
You need to make sure you have the same NLS_LANG setting both for the
client
and the server.
Regards,
Slava Imeshev
"Latha Pusapaty" <[email protected]> wrote in message
news:[email protected]...
I Tried that. But still getting the same exception.
java.sql.SQLException: ORA-01461: can bind a LONG value only for insertinto a
LONG column
at weblogic.db.oci.OciCursor.getCDAException(OciCursor.java:230)
at weblogic.jdbcbase.oci.Statement.executeUpdate(Statement.java:980)
atweblogic.jdbc20.pool.PreparedStatement.executeUpdate(PreparedStatement.java:
47)
atweblogic.jdbc20.rmi.internal.PreparedStatementImpl.executeUpdate(PreparedSta
tementImpl.java:54)
atweblogic.jdbc20.rmi.SerialPreparedStatement.executeUpdate(SerialPreparedStat
ement.java:55)
at fictx.TRServlet.doPost(TRServlet.java, Compiled Code)
at javax.servlet.http.HttpServlet.service(HttpServlet.java, CompiledCode)
at javax.servlet.http.HttpServlet.service(HttpServlet.java, CompiledCode)
atweblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java
Compiled Code)
atweblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java,
Compiled Code)
atweblogic.servlet.internal.ServletContextImpl.invokeServlet(ServletContextImp
l.java,
Compiled Code)
atweblogic.servlet.internal.ServletContextManager.invokeServlet(ServletContext
Manager.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.invokeServlet(MuxableSocketHTTP.java,Compiled
Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,Compiled
Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Same code is working fine for files less than 4000 bytes.
Oracle table has only one BLOB column.
I have set weblogic.oci.selectBlobChunkSize=1200 .
Where could be the problem?
Andreas Bittorf <[email protected]> wrote:
We resolved the problem as following:
ps = con.prepareStatement
("update tq_businessmodel set
businessmodel=?,lastupdate=?
"WHERE taskid=?");
ByteArrayOutputStream ostream = new ByteArrayOutputStream();
ObjectOutputStream p = new ObjectOutputStream(ostream);
p.writeObject(businessModel);
ps.setBinaryStream(1, newByteArrayInputStream(ostream.toByteArray()),
ostream.size());
ps.setTimestamp(2,new Timestamp(System.currentTimeMillis()));
ps.setLong(3,taskid);
ps.executeUpdate(); -
Error when inserting xml with xsi:noNamespaceSchemaLocation
Hello,
Hopefully this isn't a stupid question....
I am currently using Oracle 9.2.0.6.0 to try out XML.
I haven't been able to get our DBAs to set up XML DB in its entirety so I just have the basics, i.e. I have access to the xmltype object but none of the packages like DBMS_SCHEMA and DBMS_XDB. Therefore, I haven't been able to register any schemas in the database.
So what I'd like to know is why do I get an ORA-21700 error when I try to load an xml document which has the 'xsi:noNamespaceSchemaLocation' attribute'. If I take this out of the XML document, it loads.
From my initial reading, I got the impression that registering a schema in order to validate documents was an optional, although probably an ideal, step to take.
So another way of phrasing this subject might be: can one insert xml documents without the use of a schema?
The example code is shown below.
dbase> INSERT INTO MY_TABLE( id , message_type , status , rcvd_time, filename , xmlcol)
2 VALUES ( 1, 0 , 'RECEIVED', sysdate , 'tempfilename' ,
3 xmltype('<ExampleXML xmlns:xsi = "http://www.w3.org/2001/XMLSchema-instance"
4 xsi:noNamespaceSchemaLocation = "ExampleXML.xsd">
5 <tag1>
6 <tag2 attr1="something">Some data
7 </tag2>
8 </tag1>
9 </ExampleXML>')
10 );
xmltype('<ExampleXML xmlns:xsi = "http://www.w3.org/2001/XMLSchema-instance"
ERROR at line 3:
ORA-21700: object does not exist or is marked for delete
ORA-06512: at "SYS.XMLTYPE", line 0
ORA-06512: at line 1
dbase> ed
Wrote file afiedt.buf
1 INSERT INTO MY_TABLE ( id , message_type , status , rcvd_time, filename , xmlcol)
2 VALUES ( 1, 0 , 'RECEIVED', sysdate , 'tempfilename' ,
3 xmltype('<ExampleXML xmlns:xsi = "http://www.w3.org/2001/XMLSchema-instance"
4 >
5 <tag1>
6 <tag2 attr1="something">Some data
7 </tag2>
8 </tag1>
9 </ExampleXML>')
10* )
dbase> /
1 row created.
The xmlcol column was created simply as an xmltype column.Basically using XMLType without XML DB is almost impossible in 9.2.x. Please have the DBA's install XML DB by running the script $ORACLE_HOME/rdbms/admin/catqm.sql. They can follow the installing XDB instuctions in the XML DB Developer's guide.
What is actually happening here is that the PARSER is hard wired to always check is a document that contains an noNamespaceSchemaLocation or schemaLocation tag is associated with an XML Schema that has been registered with Oracle XML DB. If is is, special action is takem, if it isn't then no special action is taken. Unfortunately for various arcane technical reasons if the the XDB repository is not present the check fails totally. Even if we fixed this bug, which has been marked not feasible to fix in the past, there are many other issues with the inbuilt XML technology having dependancies on the presence of the XML DB repository and XDB database user.
So the net/net is don't use XMLType or any XML related features in 9.2.x or later unless XML DB is installed. It is extremenly likely at this point in time that XML DB will become a mandatory component of the next release of the database. At that point you will no longer have an option. It will be automatically installed when a database is created or updated and there will be no way of un-installing it. -
How to avoid mutating error when insert or update record
Hi ,
I have one transaction table which is having some detail record under one transaction number, after the one transaction number is over by insert or update, i
want to check the total amounts of one flag should be matched on same table if it is not then give error message. But i am getting mutating error on insert or update event trigger on statement level trigger on above table.
Is there any other way to avoid mutating error to solve the above problem or some temp table concepts to be used. help me its urgent.
Thanks in advance,
Sachin Khaladkar
PuneSachin, here's as short of an example as I could come up with on the fly. The sample data is ficticious and for example only.
Let's say I need to keep a table of items by category and my business rule states that the items in the table within each category must total to 100% at all times. So I want to insert rows and then make sure any category added sums to 100% or I will rollback the transation. I can't sum the rows in a row-level trigger because I'd have to query the table and it is mutating (in the middle of being changed by a transaction). Even if I could query it while it is mutating, there may be multiple rows in a category with not all yet inserted, so checking the sum after each row is not useful.
So here I will create;
1. the item table
2. a package to hold my record collection (associative array) for the trigger code (the category is used as a key to the array; if I insert 3 rows for a given category, I only need to sum that category once, right?
3. a before statement trigger to initialize the record collection (since package variables hang around for the entire database session, I need to clear the array before the start of every DML (INSERT in this case) statement against the item table)
4. a before row trigger to collect categories being inserted
5. an after statement trigger to validate my business rule
I then insert some sample data so you can see how it works. Let me know if you have any questions about this.
SQL> CREATE TABLE item_t
2 (category NUMBER(2) NOT NULL
3 ,item_code VARCHAR2(2) NOT NULL
4 ,pct NUMBER(3,2) NOT NULL);
Table created.
SQL>
SQL> CREATE OR REPLACE PACKAGE trg_pkg IS
2 TYPE t_item_typ IS TABLE OF item_t.category%TYPE
3 INDEX BY PLS_INTEGER;
4 t_item t_item_typ;
5 t_empty_item t_item_typ;
6 END trg_pkg;
7 /
Package created.
SQL> SHOW ERRORS;
No errors.
SQL>
SQL> CREATE OR REPLACE TRIGGER item_bs_trg
2 BEFORE INSERT
3 ON item_t
4 BEGIN
5 DBMS_OUTPUT.put_line('Initializing...');
6 trg_pkg.t_item := trg_pkg.t_empty_item;
7 END item_bs_trg;
8 /
Trigger created.
SQL> SHOW ERRORS;
No errors.
SQL>
SQL> CREATE OR REPLACE TRIGGER item_br_trg
2 BEFORE INSERT
3 ON item_t
4 FOR EACH ROW
5 BEGIN
6 trg_pkg.t_item(:NEW.category) := :NEW.category;
7 DBMS_OUTPUT.put_line('Inserted Item for Category: '||:NEW.category);
8 END item_br_trg;
9 /
Trigger created.
SQL> SHOW ERRORS;
No errors.
SQL>
SQL> CREATE OR REPLACE TRIGGER item_as_trg
2 AFTER INSERT
3 ON item_t
4 DECLARE
5 CURSOR c_item (cp_category item_t.category%TYPE) IS
6 SELECT SUM(pct) pct
7 FROM item_t
8 WHERE category = cp_category;
9 BEGIN
10 DBMS_OUTPUT.put_line('Verifying...');
11 FOR i IN trg_pkg.t_item.FIRST..trg_pkg.t_item.LAST LOOP
12 DBMS_OUTPUT.put_line('Checking Category: '||trg_pkg.t_item(i));
13 FOR rec IN c_item(trg_pkg.t_item(i)) LOOP
14 IF rec.pct != 1 THEN
15 RAISE_APPLICATION_ERROR(-20001,'Category '||trg_pkg.t_item(i)||' total = '||rec.pct);
16 END IF;
17 END LOOP;
18 END LOOP;
19 END item_as_trg;
20 /
Trigger created.
SQL> SHOW ERRORS;
No errors.
SQL> INSERT INTO item_t
2 SELECT 1, 'AA', .3 FROM DUAL
3 UNION ALL
4 SELECT 2, 'AB', .6 FROM DUAL
5 UNION ALL
6 SELECT 1, 'AC', .2 FROM DUAL
7 UNION ALL
8 SELECT 3, 'AA', 1 FROM DUAL
9 UNION ALL
10 SELECT 1, 'AA', .5 FROM DUAL
11 UNION ALL
12 SELECT 2, 'AB', .4 FROM DUAL;
Initializing...
Inserted Item for Category: 1
Inserted Item for Category: 2
Inserted Item for Category: 1
Inserted Item for Category: 3
Inserted Item for Category: 1
Inserted Item for Category: 2
Verifying...
Checking Category: 1
Checking Category: 2
Checking Category: 3
6 rows created.
SQL>
SQL> SELECT * FROM item_t ORDER BY category, item_code, pct;
CATEGORY IT PCT
1 AA .3
1 AA .5
1 AC .2
2 AB .4
2 AB .6
3 AA 1
6 rows selected.
SQL>
SQL> INSERT INTO item_t
2 SELECT 4, 'AB', .5 FROM DUAL
3 UNION ALL
4 SELECT 5, 'AC', .2 FROM DUAL
5 UNION ALL
6 SELECT 5, 'AA', .5 FROM DUAL
7 UNION ALL
8 SELECT 4, 'AB', .5 FROM DUAL
9 UNION ALL
10 SELECT 4, 'AC', .4 FROM DUAL;
Initializing...
Inserted Item for Category: 4
Inserted Item for Category: 5
Inserted Item for Category: 5
Inserted Item for Category: 4
Inserted Item for Category: 4
Verifying...
Checking Category: 4
INSERT INTO item_t
ERROR at line 1:
ORA-20001: Category 4 total = 1.4
ORA-06512: at "PNOSKO.ITEM_AS_TRG", line 12
ORA-04088: error during execution of trigger 'PNOSKO.ITEM_AS_TRG'
SQL>
SQL> SELECT * FROM item_t ORDER BY category, item_code, pct;
CATEGORY IT PCT
1 AA .3
1 AA .5
1 AC .2
2 AB .4
2 AB .6
3 AA 1
6 rows selected.
SQL> -
Error when inserting install disc
Hi, When inserting a retail OS X Tiger disc into my G5 Tower to do an archive and install, when the computer boots of the CD, I get a Kernal Panic and cannot continue?
I have run permissions, and disk verify and all OK, also have completed 'memtest' and all ok there too.
Any thoughts?
ThanksWhen you try to boot from the disc, are you depressing the C key at startup? Or depressing the Option key at startup to activate the Startup Manager screen & then selecting the install disc? Whichever method you are using, try the other method.
KPs are usually caused by a hardware problem - USB, Firewire or RAM. Disconnect all external devices. If you have the Apple Hardware Test app on the discs that came with your Mac, run the AHT.
Cheers, Tom -
Inconsistent datatypes error when inserting into a object
I am trying to insert some test data into the table emp.I have managed to succesfully create the objects and types but when I try to insert into the emp table I get a inconsistent datatypes error however I have checked the datatypes and they all seem fine. Can anyone help me.
thanks
CREATE OR REPLACE TYPE Address_T AS object
(ADDR1 VC2_40,
ADDR2 VC2_40,
CITY_TX VC2_40,
COUNTY_CD VC2_40,
POST_CD VC2_40);
CREATE OR REPLACE TYPE PERSON_T AS OBJECT (
LNAME_TX NAME_T,
FNAME_TX NAME_T,
BIRTH_DATE DATE,
TELEPHONE VC2_20,
EMAIL VC2_40);
CREATE OR REPLACE TYPE EMP_T AS OBJECT (
EMP_ID NUMBER (10),
PERSON PERSON_T,
ADDRESS ADDRESS_T,
HIRE_DATE DATE)
CREATE TABLE EMP OF EMP_T
(EMP_ID NOT NULL PRIMARY KEY);
INSERT INTO EMP VALUES (1,
PERSON_T('PETCH',
'GAVIN',
'23-JAN-80',
'(01964)550700',
'[email protected]'),
ADDRESS_T('67 CANADA',
'WALKINGTON',
'BEVERLEY',
'EAST YORKSHIRE',
'HU17 7RL'),
'11-FEB-02'
ERROR at line 1:
ORA-00932: inconsistent datatypesGavin,
What is your VC2_40 and NAME_T type definition? Your insert used these as varchar2, which is a built-in type not a user-defined type. If you explicitly define these to be varchar2's, the insert statement works fine.
Regards,
Geoff
I am trying to insert some test data into the table emp.I have managed to succesfully create the objects and types but when I try to insert into the emp table I get a inconsistent datatypes error however I have checked the datatypes and they all seem fine. Can anyone help me.
thanks
CREATE OR REPLACE TYPE Address_T AS object
(ADDR1 VC2_40,
ADDR2 VC2_40,
CITY_TX VC2_40,
COUNTY_CD VC2_40,
POST_CD VC2_40);
CREATE OR REPLACE TYPE PERSON_T AS OBJECT (
LNAME_TX NAME_T,
FNAME_TX NAME_T,
BIRTH_DATE DATE,
TELEPHONE VC2_20,
EMAIL VC2_40);
CREATE OR REPLACE TYPE EMP_T AS OBJECT (
EMP_ID NUMBER (10),
PERSON PERSON_T,
ADDRESS ADDRESS_T,
HIRE_DATE DATE)
CREATE TABLE EMP OF EMP_T
(EMP_ID NOT NULL PRIMARY KEY);
INSERT INTO EMP VALUES (1,
PERSON_T('PETCH',
'GAVIN',
'23-JAN-80',
'(01964)550700',
'[email protected]'),
ADDRESS_T('67 CANADA',
'WALKINGTON',
'BEVERLEY',
'EAST YORKSHIRE',
'HU17 7RL'),
'11-FEB-02'
ERROR at line 1:
ORA-00932: inconsistent datatypes -
Timeout expired error when inserting into a mirrored server
We have 3 SQL Server 2012 servers.
All 3 SQL Server has the same database, ie myDB.
In 2 of the servers (say server A and B), myDB is mirrored, and on the 3rd server myDb is NOT mirrored.
When the program calls a stored procedure to insert a record into a table in the database, on the mirrored servers (server A and B) sometimes it takes up to 7 seconds and gave an error "Timeout expired. The timeout period elapsed prior
to completion of the operation or the server is not responding. This failure occured while attempting to connect to the Principle server." This doesn't happen all the time, but happens often enough throughout the day.
The 3rd server (that is NOT mirrored) never gives this Timout expired error.
Will mirrored server cause slowness in writing, thus causes the Timeout expired error ?
Thank you.Since we can live with some missing data, I think we should use asynchronous mirroring instead of synchronous, do you agree ?
That may be an options, provided that you are on Enterprise Edition. As I recall, Standard Edition only has synchronhous mirroring.
There are caveats with asynchronous mirroring. One is data loss in case of a failover, which you say that you can live with. There may be more caveats, though. Unfortunately, since my role is more of a developer than a DBA, I'm not too well versed in
the details. Maybe someone else can fill in?
Can a firewall issue cause mirror latency, that in turn causes the delay in writing to the principal database ?
Firewalls and other network hiccups certainly can cause a latency.
Erland Sommarskog, SQL Server MVP, [email protected] -
Error when inserting in a table with an identity column
Hi,
I am new to Oracle SOA suite and ESB.
I have been through the Oracle training and have worked for about 2 months with the tooling.
We have a Database adabter that inserts data in 5 Tables with relations to each other.
Each table has his own not NULL Identity column.
When running/ testing the ESB service we get the error at the end of this post.
From this we learned that the Database adapter inserts the value NULL in the identity column.
We cannot find in the documentation how to get the database adabter to skip this first column and ignore it.
Is this possible within the wizard? Our impression is no
Is this possible somwhere else/
And if so How can we do this?
If anyone can help it would be greatly appreciated
Pepijn
Generic error.
oracle.tip.esb.server.common.exceptions.BusinessEventRejectionException: An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/GVB_PDI_PDI_Wegschrijven_Medewerkergegevens/testurv.wsdl [ testurv_ptt::insert(VastAdresCollection) ] - WSIF JCA Execute of operation 'insert' failed due to: DBWriteInteractionSpec Execute Failed Exception.
insert failed. Descriptor name: [testurv.VastAdres]. [Caused by: Cannot insert explicit value for identity column in table 'VastAdres' when IDENTITY_INSERT is set to OFF.]
; nested exception is:
ORABPEL-11616
DBWriteInteractionSpec Execute Failed Exception.
insert failed. Descriptor name: [testurv.VastAdres]. [Caused by: Cannot insert explicit value for identity column in table 'VastAdres' when IDENTITY_INSERT is set to OFF.]
Caused by Uitzondering [TOPLINK-4002] (Oracle TopLink - 10g Release 3 (10.1.3.3.0) (Build 070608)): oracle.toplink.exceptions.DatabaseException
Interne uitzondering: com.microsoft.sqlserver.jdbc.SQLServerException: Cannot insert explicit value for identity column in table 'VastAdres' when IDENTITY_INSERT is set to OFF.Foutcode: 544
Call:INSERT INTO dbo.VastAdres (ID, BeginDatum, Einddatum, Land, Plaats, Postcode, VolAdres) VALUES (?, ?, ?, ?, ?, ?, ?)
bind => [null, 1894-06-24 00:00:00.0, 1872-09-04 00:00:00.0, Nederland, Wijdewormer, 1456 NR, Oosterdwarsweg 8]
Query:InsertObjectQuery(<VastAdres null />).Hi,
Click on the resources tab in the ESB system/ Project to see the ESB system design and all the components in it.
Click on the Database adapter that you want to edit..and make the necesary changes..
Check this link.
http://download-uk.oracle.com/docs/cd/B31017_01/core.1013/b28764/esb008.htm for "6.8.2 How to Modify Adapter Services" section.
If you are calling a database procedure which inturn makes the insert, you will have to make changes in the database and you job would be much simpler. It seems there are limitations on what you can change in the Database adapter once it is created. Please check the link for further details.
Thanks,
Rajesh
Maybe you are looking for
-
Should I sell my iPod Touch 4th Gen.? If so, how much should I sell it for?
Hi, there! I'm new to this Apple Discussions page, so greetings to all. So I am thinking of selling my iPod Touch 4th Generation in order to buy the iPod Touch 5th Generation. My iPod has 16 gigabytes; I'm planning on getting the 5th Gen. 16gb as a r
-
I googled Firefox and tried to download the version I was using and it again downloaded this new version. I have no Firefox to use! Is there a way to get the 3.6 version back?
-
Multiple Digital Signatures (certificates) results in VERY slow PDF
I created a form in Lifecycle that typically has 8 signatures. As more signatures are added the form slows down significantly. Our director, who ultimately signs off on the document, has informed us that it took him 35+ minutes to approve 3 documen
-
Help! Can't open VRD_MC3 DVD's
I have an urgent project for a client who needs me to rip a bunch of high school basketball games for future editing. They are all VRD_MC3 DVD's! I've never seen this format before. The discs sometimes play upon insertion, but then the folder contain
-
EventId: 8198 & 1058 on new Dell T-420
Looks like some sort of licensing issue with the pre-installed OEM license on our new Dell T-420 running hyper-V role, the following event is logged at startup: 1058 - Security-SPP Installation of the Proof of Purchase from the ACPI table failed. Er