Error when install Windows 7 2nd time [ boot screen coming always ]

When I install windows 7 for 2nd time, I can`t continue installing because of, a boot a screen coming always.
It is, choose a OS to continue and auto installation of windows 7 can`t run.
Please help me.

How did you install Windows 7 for 2nd time, with a installation disk? Make sure to enter the boot menu, then choose to boot from CD\DVD.
More instructions, you can refer to this link
http://windows.microsoft.com/en-in/windows/installing-reinstalling-windows#1TC=windows-7
As arnavsharma said, more information and a screenshot will be helpful
Yolanda Zhu
TechNet Community Support

Similar Messages

Error 0x80070017 when installing Windows 7 via Boot Camp...

I've been trying hard to research this issue and haven't come across anything that has worked for me.
At work, we have an iMac (Early-2009) that we wish to install Windows 7 on. Previous user has left, so I reinstalled Snow Leopard (10.6) and used Disk Utility from the disc to reformat complete to GUID single partition Mac OS Extended (Journaled), which is pretty standard for Macs. Mac OS X installed and booted just fine. I updated completely to 10.6.8 and all other updates. Only installed Microsoft Office 2011 and Firefox.
So Boot Camp begins...
Found that the early-2009 model doesn't "support" Windows 7 64-bit, so we are fine going with 32-bit. The 32-bit Windows 7 disc has been used to install Windows 7 using Boot Camp on 2 Mac Mini's (one Intel Core Duo, the other one Intel Core 2 Duo) just a few days ago.
Opened Boot Camp Assistant, partitioned the 1TB drive equally, inserted the Windows 7 disc, and clicked Restart.
It boots from the Windows 7 disc, I go through the options, choose the BOOTCAMP partition and format it (I assume Windows 7 is choosing NTFS for me). Click next.
It copies the files instantly, but then "begins" to Expand the files. It remains at 0% for 5-10 minutes (I can hear the Windows 7 DVD spin down and spin up, but mostly spin down). That's when the error hits:
"Windows cannot copy files required for installation. The files may be corrupt or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0x80070017"
I click Ok and cancel the install. Restart and boot back into Mac OS X. And here I am.
Important Notes:
I've tried multiple times with a 64-bit disc as well. I will likely go check out another 32-bit disc from our software department, but I know this disc works on other Macs.
This issue occurred a month back as well when we attempted to install Windows 7 via Boot Camp (so before the hard drive and OS were reformatted and reinstalled). I was hoping reformatting and reinstalling the Mac OS X would solve the issue.
The Superdrive appears to be working just fine.
I read somewhere that I need to use repair disk to fix it. Does anyone know if I can repair disk a NTFS partition? Or am I suppose to repair disk the parent drive itself? The place I read it wasn't specific AT ALL and the forum was closed and I couldn't find a way to get a hold of the person. It just said "Repair disk did the trick". People, if you find a solution to your own problem, POST the solution!
Thanks in advance!

Yea, I saw that kb article. I verified we have the early 2009 iMac. It's an iMac 9,1 (3.06 24-inch, A1225).
As far as different hardware, I really don't think so, but I'll have to double check with my fellow employees. The specs all match up, but I'll see if anyone remembers having to replace hardware or send it into Apple.
I did think of trying an external DVD drive too, I'll see if I can scrounge one up. I'll post if it works or not.
The employee using the machine knows Windows, but is willing to learn the Mac OS X. Diversify your experiences I always say!
An added note to the Repair Disk "solution". Turns out you can't run Repair Disk on NTFS partitions or the parent hard drive that contains that partition, which makes since. I can only run Repair Disk on the HFS+ partition which did no good. (This is, of course, from booting up using a Mac OS X Install DVD).
Mac_Win, thanks for the suggestions!

Blank screen when installing Windows 7 with Boot Camp - Mac Mini 2011

I'm new to the Mac scene, having barely any knowledge on the OS.
I've been trying to install Windows 7 via Boot Camp on my new Mac Mini (Latest offering from Apple).
I have an External DVD Drive which I have been using, connected via two USB's to the back of the Mac Mini itself. It's fully functioning, with the Mac recognizing the Drive. I've used it for some CD's and DVD's so far.
I have a full, licensed copy of Windows 7 Home Premium, bought from the Microsoft Store on a DVD. There's both a 64bit and 32bit DVD, of which I have tried both to install Windows 7.
I've been through the Boot Camp Assistant software, un ticking both the "Create a Windows 7 install disk" and "Download the latest Windows support software from Apple" because I already have the Windows 7 install disk. I've had troubles downloading the Windows support software from Apple, as it just stops about 1/4 of the download for no apparent reason.
So once I've made the partition, I insert the Windows 7 DVD into the External Disk Drive, and it reboots. At first it looks like the Disk Drive is working, as you can hear the Disk movement and a blue light on the front of the Disk Drive... But then the screen goes blank, and the Disk stops spinning (from what I can tell). Nothing else happens from then on.
Is there any reason as to why this is happening?
Thanks, Dominic

Yes. Booting from a USB-DVD to install Windows
The MacBook Air has extra drivers. Some people have edited the script preference plist to add their model Not all USB DVD devices may or may not work.
Burning electronic versions like an ISO or in .exe format you will see threads where that is the issue.

Error when installing windows 7

Hello... When installing Windows 7 Ultimate, I'm getting an error during the windows installation setup. I get the error 0x800024. I choose the correct partition, click install, and this error shows.
I'm on a mac pro and on snow leopard. I have boot camp 3.0.1, which doesn't show windows 7 when it's about to reboot into the installation screen. Is there anything I can do?

Have you looked here?
http://support.apple.com/kb/HT3986
Supposedly you need BootCamp 3.1 for Windows 7.
On a MacPro you can't have the Mac OS in slot 1 if you going to install Windows on a second drive. Just put the blank one in slot #1 (that you want Windows on) and then Mac OS drive in slot #2, #3 or #4 and it should work then.
Boot Camp can only use up to 2 partitions, Mac as #1 and/or Windows as #2. No 3rd partition. You have to have enough free space to use Boot Camp. If you have a 300 gig disk and you have 200 gigs worth of space used up it will only see the 100 gig of space left. And if it's an old disk you may not have enough CONTINUOUS space for it. The files may be all over and it can't find enough free space.
If on a second (blank) disk what I did was use Disk Utility to format/partition (UFS, Journaled) the whole disk as 1 partition and then let Boot Camp/Windows 7 (I used XP) repartition the disk as NTFS as the first partition (for XP) and left the second (for storage) alone. Or in your case just let Boot Camp/Windows partition it as one NTFS.
You have to tell it which one to use. If you don't have a choice then set the partition larger then 32 gigs then you should only have one choice, NTFS.
The Mac can't write to an NTFS disk so it can't make a NTFS partition. So that is why you just partition it like you would if you were only putting the Mac on it. (On an already blank disk). Then when Boot Camp/Windows takes over then Windows can write the NTFS partition.
The same with a Mac already on a hard drive. 1 partition. Boot Camp/Windows will then make the 2nd partition an NTFS partition (or what ever you want).
Hope this helps....

Error when installing windows 0x8007000d

Hi,
I just purchased a macbook pro retina display 13 inch (Mid 2014) and i've been attempting to install windows 8.1 through bootcamp however I seem to get the same error "cannot open the required file D;\source\install.esd" make sure that the files required for installation are available and restart the installation 0x8007000D".
I downloaded the iso through the microsoft website onto a windows 7 pc and transferred onto the macbook, from there i just followed the instructions on bootcamp. The error seems to be coming up after i complete the installation on osx, It reboots onto windows 8 and it gives me the error pretty much straight away.
For clarification i've used a 16gb usb
Any help would be great
Thanks in Advance

Have you looked here?
http://support.apple.com/kb/HT3986
Supposedly you need BootCamp 3.1 for Windows 7.
On a MacPro you can't have the Mac OS in slot 1 if you going to install Windows on a second drive. Just put the blank one in slot #1 (that you want Windows on) and then Mac OS drive in slot #2, #3 or #4 and it should work then.
Boot Camp can only use up to 2 partitions, Mac as #1 and/or Windows as #2. No 3rd partition. You have to have enough free space to use Boot Camp. If you have a 300 gig disk and you have 200 gigs worth of space used up it will only see the 100 gig of space left. And if it's an old disk you may not have enough CONTINUOUS space for it. The files may be all over and it can't find enough free space.
If on a second (blank) disk what I did was use Disk Utility to format/partition (UFS, Journaled) the whole disk as 1 partition and then let Boot Camp/Windows 7 (I used XP) repartition the disk as NTFS as the first partition (for XP) and left the second (for storage) alone. Or in your case just let Boot Camp/Windows partition it as one NTFS.
You have to tell it which one to use. If you don't have a choice then set the partition larger then 32 gigs then you should only have one choice, NTFS.
The Mac can't write to an NTFS disk so it can't make a NTFS partition. So that is why you just partition it like you would if you were only putting the Mac on it. (On an already blank disk). Then when Boot Camp/Windows takes over then Windows can write the NTFS partition.
The same with a Mac already on a hard drive. 1 partition. Boot Camp/Windows will then make the 2nd partition an NTFS partition (or what ever you want).
Hope this helps....

Unknown Hard Error when installing Windows XP?

Ok first off I tried installing Windows Vista Home Premium on my new 24in iMac and after installation had problems installing drivers. Found out it was because I had a 64 bit version of Vista and the iMacs dont support that. Then I got a copy of XP Home Service Pack 3 from a friend to try. Im not sure if it is 32 or 64 bit but I was going to try it anyways. Its starts to extract the files and get ready for the install but not long after it does that it gives me an unknown error and the blue screen of death.
"STOP: c0000221 Unknown Hard Error
\SystemRoot\System32\ntdll.dll"
Does anyone know what this means? I would really like to get one of them installed. I dont care which one...if anyone knows how I can put a 64bit version of Vista on my iMac that would probably be best since it installed fine and just messed up when installing the drivers. Otherwise can anyone tell me what to do about this unknown error? Or do I need to search around for yet another operating system cd?
Any help will be greatly appreciated.

Hi KadeP,
there is indeed not a solution for that CD-problem, since you are getting it when installing from the CD not after the installation, when there is a problem with that specific file on your harddisk.
So, apart from the checking of the CD for physical problems (dirt, dust, scratches) the only other solution would be the use of another CD and maybe doing a full disc-copy of that CD onto a CD-R or CD-RW and hoping the best.
As for the Vista procedures the hatter described, all these has to be done before even installing Vista and also on a Windows PC.
The outcome of that would be a modified Vista Installation DVD, which seems to be installing even on iMacs not really supported.
Since I don't have Vista I never tried it myself, though.
But the hatter is 'our local Vista/Windows 7 genius'
As for the 'old XP CD' you found:
such behaviour/error is usually a sign that the XP CD is not at Service Pack level 2 (SP2) which is a must for XP CDs.
However, you can use these instructions http://www.winsupersite.com/showcase/windowsxpsp2slipstream.asp to 'slipstream' yourself a XP SP2 installation CD.
But again, you have to do it on a running Windows PC.
Regards
Stefan

Error when installing windows 8 onto my Macbook Pro

I am trying to download Windows 8 onto my Macbook Pro, it is a 2011 Model and is running OS X Lion 10.7.5.
I have created a bootable usb drive through bootcamp with a windows 64 bit iso.
I then go through the Bootcamp wizard, when the computer tries to install windows 8, it cannot recognise the bootable usb. It prompts me to enter a drive. Therefore upon restarting I press the alt key, which allows me to select EFI boot. Once I have done this, it starts the windows 8 wizard. However there is a problem with the partition. It says this partition is in the wrong format, so I press the format option however it still will not continue with the wizard. The exact error it says is as follows:
'Windows cannoy be installed to this disk. The selected disk has an MBR partition table. Windows can only be installed to GPT disks.
Windows cannot be installed to this disk. This computer's hardwarre may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menu.'
I've been doing this for the last 6 hours to no avail, surely installing Windows 8 should not take this long. I am not sure what I am doing wrong, if anyone could help I would appreciate it greatly.
Thank you in advance.

Hi Dawn,
Since you're using Boot Camp you should post your questions in the Boot Camp discussions, found here:
http://discussions.apple.com/forum.jspa?forumID=1165
Good luck

CRC missing file error when installing windows

When trying to instal windows on my Mac Pro desktop I keep getting the same error message. I must have tried it 6 times and always get the same message whether I am trying to my main disk partitioned, or to my secondary disk. It tells me to check my disk and I have, and cleaned it, plus I have ued the same disk to instal windows on my laptop Mac Pro without problems.
The message follows...
Error:
SXS.dll: syntax error in manifest or policy file "f:\i386\asms\6000\msft\windows\common\controls\controls.man" on line 4
xxx
error:
installation failed f:\i386\asms. Error message: Data error (cycle redundancy check)
xxx
fatal error:
one of the components that windows needs to continue setup could not be installed.
Data error (cycle redundancy check)
If you are installing from a CD there might be a problem with the disk; try cleaning the disk or using another disk.
Please help!
Doug

It should be "Cyclic Redundancy Check" I believe. If I were you I would check the disc for scratches...etc., and even if you can't detect any that are very visible, it would still be a good idea to go out and purchase some stuff designed for fixing scratches/blemishes on CD's so you can use them again. If that doesn't work, I'm at a loss.

STOP: 0x0000007E pci.sys error when installing Windows XP

I am trying to delete the original partitions on my T400 so that I can install Windows XP. I have booted from a CD and as Windows XP loads I get the above error. I have disable shadowing, changed the HD to compatibility, core multi-processing is also disabled. Any ideas?
Solved!
Go to Solution.

Hello Miner,
I've changed the version of the install cd and it worked. Thanks for the help from both of you.
Regards,
Roberto

Error when installing windows 8.1 on iMac

I am using bootcamp to install windows 8.1 on my late 2013 iMac.
All goes well during the partionitioning phase but when the iMac reboots and windows starts-up to install, I keep getting an error message with "0x8007025D".
I am using a USB with an legitimate windows ISO image
Please help

1. Do you have a Fusion Drive?
2. Is this your first attempt at installing Windows on this partition?
3. Please verify your DVD/ISO using Microsoft FCIV tool - http://support.microsoft.com/en-us/kb/841290.

Installing windows first time boot camp

I have installed windows 7 on a partition in my macbook pro and am now unable to get back to the OSX. It defaults into starting in windows 7, is there something I am missing?
Please help

You skipped the Boot Camp Guide.
There is now in Windows a quick switch icon; a Boot Camp control panel with its own startup; as well as the one in OS X. T here is Apple OSSwitcher added to Windows services now.
x = Mac OS X on startup also in addition to Option key
http://www.apple.com/support/bootcamp links to FAQ, how to, manuals, support articles
Windows had to be the default to do all the updates and restarts.
guess you never tried boot Mac from another OS X volume.
Also in rare cases zap PRAM to clear the default OS.

Stuck during Installing windows 7 using boot camp

Hi,
Anybody please help. I tried to install Windows 7 using boot camp, but always stuck halfway...please see the attached image for my failed attempt step by step. Please correct me, if i miss anything
1)
2) Then when click continue, this error came out,
I did watch in youtube how to install windows using bootcamp, there is no this type of notification supposed to come out.
3) Then , I continued, created the window installer using bootable pen drive and download the windows support.
4) But the, It just END here without proceeding to install window.
WHY IT JUST STOP HERE???PLEASE, SOMEONE TRY TO EXPLAIN AND GUIDE ME...AND WONDER IF U SEE THE NEXT IMAGE, I NEVER CAN JUMP STRIGHT TO THIRD STEP (INSTALLED OR REMOVE WINDOW), SINCE I DO HAVE THE BOOTABLE WINDOWS INSTALLER AND UPADATED SUPPORT SOFTWARE. I cant select the third option, it just greyed...
I would be great if somebody can help me out...I did try to install the windows almost 10 times already, never success...
I am using Macbook Pro Retina 13in (late 2013), Maverick 10.9.2, 2.8 Ghz Intel core i7, 8GB 1600 Mhz DDR3

Turbostar,
Yes, i do have more than one partion on my mac hard disk, so u meant, boot camp cant work with multiple partions?
If i need to format hdisk, this will be the second time, with my 3month old macbook..

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

Error 0xc00000e9 when installing windows 7 on OSX lion

I have a mid 2011 model of macbook pro i7 15 inch , and i just upgraded to OSX lion from os leopard . I tried to install windows 7 via bootcamp 4.0 , and the download for the windows support software always hangs at mid point , and must retry several times before it completes. After which when starting to install windows 7 , at the screen where it says loading windows file , suddenly there is an error of 0xc00000e9 , and i could not continue to install after which , even though i have removed all USB. Is there any way to solve this or do i have to downgrade to bootcamp 3.0 to install the windows 7.
Thanks

No downgrade, what you need to do is head to Bootcamp and delete the Bootcamp partition
Then head to Disk Utility and Erase Free Space with Zero. this will take some time and write zeros' to all your spare space on the drive, it also reads those zeros back to confirm and when it can't do that the driver software will map off the problem sector on your drive.
Once that's finished, use the Bootcamp software again and Windows should install.
You should learn about Carbon Copy Cloner and WinClone so you can restore OS X or Windows
https://discussions.apple.com/docs/DOC-3045
also read this, if your not going to be using Windows heavily or for 3D games, then this might be a better solution that dual booting.
https://discussions.apple.com/docs/DOC-3321
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

Boot camp not recognize keyboard and mouse when installing windows 7 pro 64 bit

Hi,
I have some issue when installing windows 7 pro 64 bit using boot camp. after done partitioning the windows drive and when boot to windows installation process, i've got stuck in the first screen when choosing the language. it seems that the keyboard and mouse are not detected.
i'm using boot camp ver. 5.0.
does anyone have similar problem with me?

I have finally successfully installed Windows 7 x64 on MacBook Air 13.3" (2013) thru Bootcamp.
Problem: After Windows 7 install thru BootCamp, I got to the first login screen and not input devices (Mouse, keyboard, USB) worked. I tried to boot into Windows Safemode, but I received the error "Windows can not complete installation in Safe Mode".
Cause: WIndows 7 does not have native USB 3.0 drivers, included on the install images.
Resolution: I downloaded the latest device drivers with thru BootCamp and copied them to the USB Flash Drive that had my bootable Windows 7 x64 install on it. The second option in BootCamp is "Download Support Media". This does more than just download drivers. It creates a file called "autoattended.xml". This is key as it tells Windows during the install process to use the device drivers that you download. Otherwise, you need to do it manually, which you can't because you have no mouse or keyboard.
NOTE: I had no need of a super drive because I had all the files on one USB flash drive. Therefore, I don't think it matter which side of the MBA the USB drive was plugged in, as other solutions suggested.

Error when install Windows 7 2nd time [ boot screen coming always ]

Similar Messages

Maybe you are looking for