Error when Installing Acrobat X Pro

I am getting an error when I installed Acrobat X Pro. It says some optional component failed to install correctly.
Bellow is the details it gave for the error. Thanks for any help you can offer.
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ... WARNING: DW066 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 2 warning(s)
WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0
WARNING: DW066: OS requirements not met for {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1310.Error writing to file: C:\Config.Msi\57bded6.rbf. Verify that you have access to that directory.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1310.Error writing to file: C:\Config.Msi\57bded6.rbf. Verify that you have access to that directory.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

Same problem, everything was ok with other applicatiosn (PS, DW, Illustrator) but Acrobat X Pro does not install. I tried several times, followed some instructiosn for "CS4 does not install" and "error 1310", "error exit code 6". Nothing. I use Vista with sufficient parameters. here is my error message in detail:
Exit Code: 6
Please see specific errors and warnings below for troubleshooting. For example, ERROR: DW050 ...
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 0 warning(s)
----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
ERROR: Error 1310.Error writing to file: C:\Config.Msi\c4523a9.rbf. Verify that you have access to that directory.
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1310.Error writing to file: C:\Config.Msi\c4523a9.rbf. Verify that you have access to that directory.
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Acrobat Professional: Install failed

Similar Messages

Error when installing Acrobat 11 Pro under Mac OS 10.8.3

When trying to install Acrobat 11 Pro on my iMac (2.5 GHz Intel Core i5, 8 GB RAM, OS 10.8.3) I get an error message saying "installation failed" during the "validating packages" process. The software seems to run o.k., but I'm unable to apply any updates. Any suggestions?

To investigate problem at our end, we require following logs:
1) /private/var/log/install.log
2) /tmp/oobelib.log
3) /tmp/amt3.log
4) ~/Library/Logs/PDApp.log
(It might be that out of 2,3 and 4 a few are not present. Ignore those not present on the system)

HELP! when installing Acrobat X Pro, the checkbox says "OS REQUIREMENTS NOT MET.?"

HELP! when installing Acrobat X Pro, the checkbox says "OS REQUIREMENTS NOT MET. CURRENT OS: WINDOWS VISTA SP0 64 BIT." SERVICE PACK 2 RECOMMENDED."
Then after install, it says fatal error 1603 --and im still stuck with adobe acrobat 9.

mylenium,
sorry.
the issue is i run windows 7, but acrobat x thinks im on windows vista for some reason.
the install goes all the way thru --and then gives the fatal error 1603.
indd, illustrator and photoishop are on without issue....
maybe there is a patch i need to try?
thanks,
chris
(graphic designer 15 years)

Error when launching Acrobat XI Pro

I get an error when launching Acrobat XI Pro:
Adobe License Utility has stopped working.
A problem has caused the program to stop working
correctly. Please close the program.

Hi toeneez,
Please try repairing Acrobat and check.
Try running the licensing fix patch available at : Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI
Regards,
Rave

When installing acrobat XI pro the 'select a product' drop down menu does not include my product?

when installing acrobat XI pro the 'select a product' drop down menu does not include my product?

For future reference... if you have the trial version installed and plan to buy it after trying it out, there is no need to uninstall it. It can be activted to full use with the serial number from your purchase.
You should still be able to download and install the trial version and use your serial number to activate it. For the direct download link to the trial below, be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
http://prodesigntools.com/adobe-acrobat-xi-pro-standard-reader-direct-download-links.html

How to disable the internet explorer 9 automaticly installation when installing Acrobat XI Pro

Hi,
I do have a Win7 WS with IE8 (and I dont want to upgrade to Internet Explorer 9). When I do install Acrobat XI Pro, automaticly IE 9 will be also installed. How can I stop this?

Acrobat installers do not install other products.
Ben

Error 1603 when installing Acrobat XI Pro - no luck with any suggestions

Hi all - I have been trying to download Acrobat XI Pro via the Creative Cloud installer, but I'm getting the following message:
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message:
ERROR: Third party payload installer AcroPro.msi failed with exit code: 1603
I have successfully installed Photoshop and InDesign in the same way. I have tried the following suggestions from the Community:
Empty Temp folder
Re-register msiexec
Uninstall/Cleanup Tool/Reinstall
It gets to about 42% and fails every time. Any ideas?
many thanks!

Thanks Ned. I had already tried those suggestions. Our IT Ops Manager finally sorted this out by running the installer manually, rather than through the Creative Cloud installer. It was 'Adobe PDF Creation Add-On 11.0.01', which was not removed via the Cleaner Tool.

Error 16 when installing Acrobat XI Pro

I recently purchased Adobe Acrobat XI Pro for Palomar Audubon use. While installing on a PC running Windows 8.1 I received an "error 16" message instructing me to uninstall/reinstall the program. Since then I have been informed that 1.) the entered serial number (<Serial Number removed by moderator >) is invalid and 2.) I need to uninstall and reinstall the program. At my wits end I ask that SOMEBODY can solve this dilemma for me. Let me know at: < Email ID Removed by Moderator >Although I have previously been very pleased with available donations through TechSoup I am gradually becoming more and more disheartened by this installation problem?
Now another message:
Acrobat failed to connect to a DDE server.

Thanks for offering to remove Allen Rippe:
[email protected]<mailto:[email protected]>
From the Acrobat forum,
(the sooner, the better.)
Thanks again,
Allen Rippe
Sent from my iPhone

How do I fix the Database Organizer Error when using Acrobat 9 Pro on desktop PC with Windows 8.1 and 64-bit OS?

After loading Acrobat 9 Pro on my desktop PC (Windows 8.1; 64-bit OS), opening and closing a previously saved pdf file, I constantly get a message pop-up that indicates a "database organizer" error.
How do I fix this?
I have read multiple responses at various forums and they do not seem to apply, or have not worked for others, with regard to the details of my version of Acrobat and Windows OS.
I'm beginning to think that the only solution is to purchase the latest version of Acrobat Pro and install it on my PC, which, of course, I would prefer not to do, unless this is my only viable option.
Can this problem, specific to my version of Acrobat and Windows OS, be fixed or is the simple answer: purchase the latest version of Acrobat Pro, because there is no fix for my version of Acrobat/Windows OS?
Any help would be greatly appreciated.
FHW

Hi Frank ,
Please refer to the following link and see if this helps.
https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
Regards
Sukrit Dhingra

Error when installing on Macbook Pro

I have some trouble when installing Final Cut Express HD on My Macbook Pro (intel duo core processor). It says some hardware is missing - AGP graphic card. I've search for the solution on Apple Support before and I found that there is an update 3.0.1 which could be fixed this problem directly. When I install this update, it says "it's no need for this update on this computer". What should I do now? Many thanks for responds.
Mac OS X (10.3.9)

FCE is not supposed to work on the new Intel Macs but there are workarounds.
The simplest is to just press the "esc" key when you get the error message.
Let me know if it works for you.
A new version of FCE is due soon which will work on both the old and new Macs.
Ian.

Setup interruped when installing Acrobat XI Pro

I just purchased ACrobat XI Pro for Windows and tried to install it today. I did not touch the computer during the install but it gave me this error and will not install
I rebooted and tried running the install from the CD again and the same error occurs
Setup Interrupted
The wizard was interrupted before Adobe Acrobat XI Pro could be completely installed.
Your system has not beenb modified. To complete installation at another time, please run setup again.
I have tried running setup again and no matter what I do the product does not install properly.
I am running Windows 8 64-bit
Thanks

See if you can install it via downloading it. Just use the serial number from the disk to activate it...
http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html

Fatal error when installing Acrobat Pro subscription

I have a subscription for Adobe Acrobat Pro and have never been able to install it. When I try to install it, I get a Fatal Error message. I've tried restarting the computer and re-downloading it.

The message I get is as follows:
Error Encountered
Fatal error during installation.
I am using Windows 7 Home Premium.
This error occurs as the product is downloading, when the download is nearly complete.
Thanks!

I installed Acrobat X Pro on a Windows 7 Laptop. I get error 1602 when attempting to update the product. Does anyone have any suggestions to fix it?

I installed Acrobat X Pro on a Windows 7 laptop and get error code 1602 when attempting to update it. I have tried the Repair Acrobat installation function in the help menu.

Hey fdciii,
Please try renaming the ARM folder at this location:
C:\ProgramData\Adobe\ARM
Now try updating Acrobat from the Help menu.
You can also try installing updates from the following link:
http://www.adobe.com/downloads/updates.html
Regards,
Anubha

SideBySide errors after new acrobat 9 pro install

hello,
i am building a clean install of windows 7 pro 64-bit on my laptop. after installing acrobat 9 pro, i now get several errors in the event viewer:
Activation context generation failed for "C:\Program Files (x86)\Adobe\Acrobat 9.0\Designer 8.2\FormDesigner.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0. 7601.17514_none_fa396087175ac9ac.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.76 01.17514_none_41e6975e2bd6f2b2.manifest.
Log Name:      Application
Source:        SideBySide
Date:          12/26/2011 2:59:58 AM
Event ID:      80
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      Lenovo
Description:
Activation context generation failed for "C:\Program Files (x86)\Adobe\Acrobat 9.0\Designer 8.2\FormDesigner.exe".Error in manifest or policy file "" on line . A component version required by the application conflicts with another component version already active. Conflicting components are:. Component 1: C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0. 7601.17514_none_fa396087175ac9ac.manifest. Component 2: C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_6.0.76 01.17514_none_41e6975e2bd6f2b2.manifest.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="SideBySide" />
    <EventID Qualifiers="49409">80</EventID>
    <Level>2</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2011-12-26T09:59:58.000000000Z" />
    <EventRecordID>11324</EventRecordID>
    <Channel>Application</Channel>
    <Computer>Lenovo</Computer>
    <Security />
</System>
<EventData>
    <Data>C:\Windows\WinSxS\manifests\amd64_microsoft.windows.common-controls_6595b64144ccf1d f_6.0.7601.17514_none_fa396087175ac9ac.manifest</Data>
    <Data>C:\Windows\WinSxS\manifests\x86_microsoft.windows.common-controls_6595b64144ccf1df_ 6.0.7601.17514_none_41e6975e2bd6f2b2.manifest</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>C:\Program Files (x86)\Adobe\Acrobat 9.0\Designer 8.2\FormDesigner.exe</Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
    <Data>
    </Data>
</EventData>
</Event>
the errors occur shortly after booting the system. is there a fix for these errors?

z solution is pretty simple. as always when users should repair Adobe Corp errors while Adobe Corp's time of sweat dreams....
1. download & install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package ATL Security Update (latest VC++2005) both x86 & x64:
    http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=14 431
   this is mainly for availability of ms assembly "Microsoft.VC80.CRT" version="8.0.50608.0" processorArchitecture="x86" (and amd64) publicKeyToken="1fc8b3b9a1e18e3b" in ur Win7sp1x64;
2. download & install z free resources editor application from here http://www.angusj.com/resourcehacker/
3. open in Resource Hacker file FormDesigner.exe subfolder '24' then '1' and click string 1033. then change z part of this string as explained below. in short it's just swap all "x86" entries to "*" ones (means either x86 or amd64):
a) original string:
<assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"><assemblyIdentity version="1.0.0.0" processorArchitecture="x86" name="FormDesigner" type="win32"></assemblyIdentity><description>Themed Form Designer</description><dependency><dependentAssembly><assemblyIdentit y type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" publicKeyToken="6595b64144ccf1df" language="*" processorArchitecture="x86"></assemblyIdentity></dependentAssembly></ dependency><dependency><dependentAssembly><assemblyIdentity type="win32" name="Microsoft.VC80.CRT" version="8.0.50727.762" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity></dependentAssem bly></dependency><dependency><dependentAssembly><assemblyIdentity type="win32" name="Microsoft.VC80.MFC" version="8.0.50727.762" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity></dependentAssem bly></dependency><dependency><dependentAssembly><assemblyIdentity type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" processorArchitecture="*" publicKeyToken="6595b64144ccf1df" language="*"></assemblyIdentity></dependentAssembly></dependency><dep endency><dependentAssembly><assemblyIdentity type="win32" name="Microsoft.VC80.CRT" version="8.0.50608.0" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity></dependentAssem bly></dependency><dependency><dependentAssembly><assemblyIdentity type="win32" name="Microsoft.VC80.MFC" version="8.0.50608.0" processorArchitecture="x86" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity></dependentAssem bly></dependency><trustInfo xmlns="urn:schemas-microsoft-com:asm.v3"><security><requestedPrivileg es>
<requestedExecutionLevel level="asInvoker" uiAccess="false"></requestedExecutionLevel>
</requestedPrivileges></security></trustInfo></assembly>
b) modded string:
<assembly xmlns="urn:schemas-microsoft-com:asm.v1" manifestVersion="1.0"><assemblyIdentity version="1.0.0.0" processorArchitecture="*" name="FormDesigner" type="win32"></assemblyIdentity><description>Themed Form Designer</description><dependency><dependentAssembly><assemblyIdentity type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" publicKeyToken="6595b64144ccf1df" language="*" processorArchitecture="*"></assemblyIdentity></dependentAssembly></dependency><dependency ><dependentAssembly><assemblyIdentity type="win32" name="Microsoft.VC80.CRT" version="8.0.50727.762" processorArchitecture="*" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity></dependentAssembly></dependency><de pendency><dependentAssembly><assemblyIdentity type="win32" name="Microsoft.VC80.MFC" version="8.0.50727.762" processorArchitecture="*" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity></dependentAssembly></dependency><de pendency><dependentAssembly><assemblyIdentity type="win32" name="Microsoft.Windows.Common-Controls" version="6.0.0.0" processorArchitecture="*" publicKeyToken="6595b64144ccf1df" language="*"></assemblyIdentity></dependentAssembly></dependency><dependency><dependentAs sembly><assemblyIdentity type="win32" name="Microsoft.VC80.CRT" version="8.0.50608.0" processorArchitecture="*" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity></dependentAssembly></dependency><de pendency><dependentAssembly><assemblyIdentity type="win32" name="Microsoft.VC80.MFC" version="8.0.50608.0" processorArchitecture="*" publicKeyToken="1fc8b3b9a1e18e3b"></assemblyIdentity></dependentAssembly></dependency><tr ustInfo xmlns="urn:schemas-microsoft-com:asm.v3"><security><requestedPrivileges>
<requestedExecutionLevel level="asInvoker" uiAccess="false"></requestedExecutionLevel>
</requestedPrivileges></security></trustInfo></assembly>
that's all. enjoy.
rgds,
P.S. maybe u can skip item#1. up 2 u. sorry i'm not sure because i've started from item#1 due to another errors with ID 33. that was solved by install of z above ms vc++2005 update x86.

When installing Acrobat Pro 11 on Windows 7 32 bit, it just hangs and won't install

When installing Acrobat Pro 11 on Windows 7 32 bit, it takes you through all the way to install, then it just hangs and won't install.

Hi mrmacnology,
Please check and ensure that you should not have any prior version of Acrobat already installed on your computer.
Do you get any specific error message?
You might try installing Acrobat from a different browser.
Regards,
Anubha

Error when Installing Acrobat X Pro

Similar Messages

Maybe you are looking for