Error when installing device drivers with 8.2 update

I get the following error when I try to install the updated drivers on the device driver CD set (this is when I first insert CD 1 and click install drivers). I discovered this error when I was installing labview 8.2 and when I was installing it said to insert the device driver CD. This error came up and when I subsequently tried to install it by itself I kept getting this error. I also switched CD rom drives and it still gave the error. Could the CD be corrupted??
The error is:
.\UberInstaller.cpp(1255): IInstallerError 10009
Fatal Error. Unable to create temporary file.
Unable to copy original D:\SupportFiles\resourceEng.dll to C:\DOCUME~1\LAPTOP~1\LOCALS~1\Temp\nii49D.tmp.
Windows Error Windows Error 23: Data error (cyclic redundancy check).
Any ideas?? Is it possible to download the set of drivers? I know I can download them individually but it would be helpful to be able to download the 3 CD set.
Thanks
J Bowen
US Marine; A Brunswick Family Boat Company
Product Integrity, Component Testing, and Validation
LabVIEW 8.2
CompactDAQ
DaqPad 6015
SCC-2345

Hello,
This definitely looks like a CD and/or CD drive issue - I've seen similar. If your CD drives were the same, you may try with another, although that's not necessarily helping you on your development machine. Another thing to try is copying the contents of the CD to your hard drive, and installing from there. This has the added benefit if/when you build installers in LabVIEW for your applications that IF you have to include additional installers (this is an option in the installer build spec) THEN they will be referenced from your hard drive INSTEAD of the CDs, which you would otherwise be prompted for... if you happen to have misplaced them, this can be a point of frustration!
I hope this helps!
Best Regards,
JLS
Message Edited by JLS on 09-12-2006 02:15 PM
Best,
JLS
Sixclear

Similar Messages

Error when install sap license with 'saplicense -install'

Dear experts,
Error when install sap license with 'saplicense -install':
SAPLICENSE (Release 640) ERROR ***
    ERROR:   Can not set DbSl trace function
    DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
    RC-INFO: error loading dynamic db-library - check environment for:
             dbms_type = <db-type> (e.g. ora)
             DIR_LIBRARY = <path to db-dll> (e.g. /usr/sap/SID/SYS/exe/run)
Could you gvie me any ieda?

Another way is to open a command prompt as nspadm and run saplicense -install
To do this follow the steps below
Click "Start" -> "Run..." and enter:
runas /u:nspadm cmd
Enter nspadm's password. A command prompt appears running as user nspadm. Now change to \usr\sap\nsp\SYS\exe\run and run
saplicense -install
Hope this helps.
Regards,
Klause

Error while installing Device Drivers from Disk1 for Labview 8.2

I am having trouble installing the Device Driver Reference CDs for LabView. I already installed LabView 8.2.1. When I try to install the device drivers from Disk1, I get the following error message :
.\UberInstaller.cpp(1458): IInstallerError 10009
Fatal Error. Unable to create temporary file.
Unable to copy original d\SupportFiles\resourceEng.dll to C:\DOCUME~1\x0039441\LOCALS~1\Temp\nii478.tmp.
Windows Error Windows Error 64: The specified network name is no longer available.
I can open the cd and see its contents, but I am unable to install it.
Can anyone help me in resolving this error.
thanks
Siddharth
Message Edited by Siddharth D on 08-05-2008 06:31 AM

Well I am stuck with this problem

Error when install latest ODB with Oracle Designer

I need to use Oracle Discoverer.
So I removed all traces of Oracle from my machine.
Installed Oracle Designer Suite.
It worked.
Then I installed Oracle Data Provider for .NET 9.2.0.2.102..
I got 2 errors during install. One was due to a service (OracleHomeAgent) which I shut down easily.
The other, was more trouble:
Error in writing to file C:\Oracle\Ora92\bin\oci.dll
I could find no more Oracle services to shut down.
Nor did an IISRESET release it .
So I told it to ignore copying that file.
Then it finished.
My web applications which use ODP seem to work fine.
But am I at risk for some error?
Why would OCI.DLL not allow itself to be installed?
Is that a problem?
thanks
David Kreth Allen

Most likely, some MS OS services, not Oracle services, are locking your oci.dll. Please refer to the following thread for a workaround.
Re: Can't install 9.2.0.4 Beta on WinXP - oci.dll is locked

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either

I have a mid 2009 macbook pro and my issue is that I installed windows 7 and when I wan to install the drivers it says " bootcamp x64 is unsupported on this computer model" I tried installing the drivers with the bootcamp 4 but it did not work either it says that i have a newer bootcamp version. I tried a few tricks but they didnot work. I hope to be helped

Welcome to Apple Support Communities
You can install a 64-bit Windows 7 or Vista version in your Mac. Make sure you downloaded these drivers > http://support.apple.com/kb/DL1630 Also, if you have the Snow Leopard DVD you used to upgrade your Mac or the OS X DVD that came with your Mac, you can use it to install the Boot Camp drivers

Error when installing drivers-WoW Wired Headset

This is the error i get when installing the drivers, firmware worked fine.
Error Code: -5004 : 0x80070005
Error Information:
>SetupDLL\SetupDLL.cpp (968)
PAPP:Sound Blaster World of Warcraft Headset
PVENDOR:Creative Technology Ltd (http://www.creative.com)
PGUID:0429B343-D023-4524-89BC-0478E0D9E3C3
$9..0.429
@Windows Service Pack 2 (6002) IE 8.0.600.8999

It appears if you are unlucky enough to get ths recurrent fatal error(asI I have) and are not a pc tech, you have purchased a door stop. I have purchased hp printers for years but this will be the last. Like the previous consumer, I have wasted countless hours on this correction.... Will never happen again. I will not double the cost of the printer paying consultants who swoop in like vultures to correct the problem.

Error when installing SM7 "The step runMigrationMonitor with step key "

Hi all
Please help for the following error when installing
ERROR 2009-06-13 00:27:13.515
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Regards
Kevin

Hi Uday
import.monitor.java.log
Loading of 'SASACONT1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 4, failed 0, total 29.
Import Monitor jobs: running 3, waiting 22, completed 4, failed 0, total 29.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 4, failed 1, total 29.
Loading of 'REPOSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 22, completed 4, failed 2, total 29.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 0, waiting 22, completed 4, failed 3, total 29.
Import Monitor jobs: running 1, waiting 21, completed 4, failed 3, total 29.
Import Monitor jobs: running 2, waiting 20, completed 4, failed 3, total 29.
Import Monitor jobs: running 3, waiting 19, completed 4, failed 3, total 29.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 2, waiting 19, completed 4, failed 4, total 29.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 1, waiting 19, completed 4, failed 5, total 29.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 19, completed 4, failed 6, total 29.
Import Monitor jobs: running 1, waiting 18, completed 4, failed 6, total 29.
Import Monitor jobs: running 2, waiting 17, completed 4, failed 6, total 29.
Import Monitor jobs: running 3, waiting 16, completed 4, failed 6, total 29.
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 2, waiting 16, completed 4, failed 7, total 29.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 16, completed 4, failed 8, total 29.
Loading of 'STERM_TEXT' import package: ERROR
Import Monitor jobs: running 0, waiting 16, completed 4, failed 9, total 29.
Import Monitor jobs: running 1, waiting 15, completed 4, failed 9, total 29.
Import Monitor jobs: running 2, waiting 14, completed 4, failed 9, total 29.
Import Monitor jobs: running 3, waiting 13, completed 4, failed 9, total 29.
Loading of 'SEOSUBCODF' import package: ERROR
Import Monitor jobs: running 2, waiting 13, completed 4, failed 10, total 29.
Loading of 'E071K' import package: ERROR
Import Monitor jobs: running 1, waiting 13, completed 4, failed 11, total 29.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 13, completed 4, failed 12, total 29.
Import Monitor jobs: running 1, waiting 12, completed 4, failed 12, total 29.
Import Monitor jobs: running 2, waiting 11, completed 4, failed 12, total 29.
Import Monitor jobs: running 3, waiting 10, completed 4, failed 12, total 29.
Loading of 'ATAB' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 4, failed 13, total 29.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 1, waiting 10, completed 4, failed 14, total 29.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 0, waiting 10, completed 4, failed 15, total 29.
Import Monitor jobs: running 1, waiting 9, completed 4, failed 15, total 29.
Import Monitor jobs: running 2, waiting 8, completed 4, failed 15, total 29.
Import Monitor jobs: running 3, waiting 7, completed 4, failed 15, total 29.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 7, completed 4, failed 16, total 29.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 1, waiting 7, completed 4, failed 17, total 29.
Loading of 'SAPSLEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 7, completed 4, failed 18, total 29.
Import Monitor jobs: running 1, waiting 6, completed 4, failed 18, total 29.
Import Monitor jobs: running 2, waiting 5, completed 4, failed 18, total 29.
Import Monitor jobs: running 3, waiting 4, completed 4, failed 18, total 29.
Loading of 'SAPDDIM' import package: ERROR
Import Monitor jobs: running 2, waiting 4, completed 4, failed 19, total 29.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 1, waiting 4, completed 4, failed 20, total 29.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 4, failed 21, total 29.
Import Monitor jobs: running 1, waiting 3, completed 4, failed 21, total 29.
Import Monitor jobs: running 2, waiting 2, completed 4, failed 21, total 29.
Import Monitor jobs: running 3, waiting 1, completed 4, failed 21, total 29.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 4, failed 22, total 29.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 4, fail
ed 23, total 29.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 4, failed 24, total 29.
Edited by: Kevin Wong on Jun 18, 2009 11:23 AM
Edited by: Kevin Wong on Jun 18, 2009 11:24 AM

I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple s

I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple store from debug menu, double checked my apple id account and etc..but doesn't work anyway.

I'm having the same problem and went as far as to delete and reinstall the AppStore and still no dice.

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Unknown Hard Error when installing Windows XP?

Ok first off I tried installing Windows Vista Home Premium on my new 24in iMac and after installation had problems installing drivers. Found out it was because I had a 64 bit version of Vista and the iMacs dont support that. Then I got a copy of XP Home Service Pack 3 from a friend to try. Im not sure if it is 32 or 64 bit but I was going to try it anyways. Its starts to extract the files and get ready for the install but not long after it does that it gives me an unknown error and the blue screen of death.
"STOP: c0000221 Unknown Hard Error
\SystemRoot\System32\ntdll.dll"
Does anyone know what this means? I would really like to get one of them installed. I dont care which one...if anyone knows how I can put a 64bit version of Vista on my iMac that would probably be best since it installed fine and just messed up when installing the drivers. Otherwise can anyone tell me what to do about this unknown error? Or do I need to search around for yet another operating system cd?
Any help will be greatly appreciated.

Hi KadeP,
there is indeed not a solution for that CD-problem, since you are getting it when installing from the CD not after the installation, when there is a problem with that specific file on your harddisk.
So, apart from the checking of the CD for physical problems (dirt, dust, scratches) the only other solution would be the use of another CD and maybe doing a full disc-copy of that CD onto a CD-R or CD-RW and hoping the best.
As for the Vista procedures the hatter described, all these has to be done before even installing Vista and also on a Windows PC.
The outcome of that would be a modified Vista Installation DVD, which seems to be installing even on iMacs not really supported.
Since I don't have Vista I never tried it myself, though.
But the hatter is 'our local Vista/Windows 7 genius'
As for the 'old XP CD' you found:
such behaviour/error is usually a sign that the XP CD is not at Service Pack level 2 (SP2) which is a must for XP CDs.
However, you can use these instructions http://www.winsupersite.com/showcase/windowsxpsp2slipstream.asp to 'slipstream' yourself a XP SP2 installation CD.
But again, you have to do it on a running Windows PC.
Regards
Stefan

Error when Installing Eax-console as part of Audigy support pack 3.6

<div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem:
I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently I used 3.5 and 3.6 in both OS for a short time.
now I had to format my harddisk an have installed a clean version of Win XP SP3. I installed an update pack (winboard.org), the latest direct X and drivers for nvidia motherboard and videocard. Then, when I tried to install this support pack, I get an error messagge I-00 when eax-console should have been installed, something about CTengine being unable to be installed.
I read through many of the solutions here in the forum, since this error seems to be not so rare. But up to now, nothing helped. This is, what my install.log tells me:
[EAX Console]
GUID={5B7E626-7885-4FC3-A66A-73548A4F0FD}
Warning=I-008 CTRegSvr fails to register C:\Programme\Creative\EAX\Karaoke.exc.
[Common Audio Driver Interface]
GUID={700932B3-A964-4878-82A2-96054622AF7}
Warning=I-007 RegSvr32 fails to un-register C:\Programme\Creative\ShareDLL\CADI\ctcadi.dll.
All other install.log from the other parts of the pack contain no warning. Everything except the EAX-console works fine, if I try to start that, I get an error "No components are registered", an I don't have a "karaoke" register, but otherwise it works well, I can use the effects and cmss.
What the heck could I do?
I made an new thread, since nobody seamed to react to my post in the support pack thread.

HRe: Error when Installing Eax-console as part of Audigy support pack 3.6o What you have is a missing file, or perhaps your system is wanting to install direct X redistributable or something similar. Do a search on your system for install.log and when you find the newest one, or second to newest one, open it with notepad. It will tell you exactly what you are missing. I was trying to install some components for my Elite Pro and it said in the install.log that it could not find DXREDIST. So I copied a version I had to the installing program's folder and it worked!? So take a look at that log and see what is missing......write back with your results if you dont mind. In the original post I had seen the registration problems with components. You can manually run regsvr32 with the /? switch and see how to unregister that yourself and then try the installation again.
Cheers,
jmacguire

Root.sh failed throws error when installing Oracle Grid Infrastructure 11.2

Hi,
root.sh failed with the following error when installing / configuring the oracle grid infrastructure version 11.2.0.1 for standalone on RHEL 6
Now product-specific root actions will be performed.
2011-10-10 11:46:55: Checking for super user privileges
2011-10-10 11:46:55: User has super user privileges
2011-10-10 11:46:55: Parsing the host name
Using configuration parameter file: /apps/opt/oracle_infra/crs/install/crsconfig_params
Creating trace directory
LOCAL ADD MODE
Creating OCR keys for user 'oracle', privgrp 'oinstall'..
Operation successful.
CRS-4664: Node vmhost1 successfully pinned.
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /apps/opt/oracle_infra/crs/install/roothas.pl line 296.
I followed the steps / solution provided in the ID 1069182.1. But no use.
Are there any workaround?
Thanks
-KarthicK
Edited by: user11984375 on Oct 10, 2011 7:06 AM

Check the logfiles under $GRID_HOME/log/<node_name>/cssd/
I had seen the same problem and the following resolved the problem for me.
[root@rac1 ~]# rm -f /usr/tmp/.oracle/* /tmp/.oracle/* /var/tmp/.oracle/*
[root@rac1 ~]# > $ORA_CRS_HOME/log/<node_name>/cssd/<node_name>.pid
HTH,
Raj Mareddi
http://www.freeoraclehelp.com

Error While Installing IDES ECC6 with SQL Server 2005

Dear Experts,
I found an error while installing IDES ECC6 with SQL Server 2005. The error is raising at the stage of 17 of 24 processing the procedure of 195 of 197 (sap_z_set_permissions).
I have tried several times by configuring different type of activites but still i am facing the same problem at the same stage. Please help me in thig regard.
I herewith pasted hereunder log files information
Regards,
B.Sudharsan
ERROR 2008-01-17 18:38:47
FCO-00011 The step ExeProcs with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs was executed with status ERROR .
INFO 2008-01-17 18:40:05
An error occured and the user decide to stop.\n Current step "|NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|1|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_Postload|ind|ind|ind|ind|10|0|NW_Postload_MSS|ind|ind|ind|ind|2|0|MssProcs|ind|ind|ind|ind|1|0|ExeProcs".
ERROR 2008-01-17 18:38:47
MDB-05053 Errors when executing sql command: <p nr="0"/> If this message is displayed as a warning - it can be ignored. If this is an error - call your SAP support.

Sudarshan,
Occasionally, mid-way through the upgrade, DB permissions to users might change. Check to see, if the users SAP<SID>, OPS$ users have the DBA privilege. Re-assign the role and try continuing with the upgrade.

Error when install Infrastructure 10g 10.1.2 in Windows2000 server

My environment:
RDBMS Version: 10.1.0.3.1
Operating System and Version: Windows2000 SP4
Product (i.e., OAS, IAS, etc): 10g AS Release 2
Product Version: 10.1.2
JDK Version: 1.4
I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
Subscriber Naming attribute: dc
Default Subscriber Name: server01
*** Resetting user DN and GUID information ...***
Done....
PL/SQL procedure successfully completed.
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
NLS_LANG character set = WE8MSWIN1252
NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
ERROR : Exception while configing SSO DAD :
oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
Please advice.
Thanks
Trung

I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex

Error when installing device drivers with 8.2 update

Similar Messages

Maybe you are looking for