Error when installing following program

Here is the error message that will show up as the installer
finished extracting the file(s)
Title of box: Adobe Flash Professional
Text of box: A problem occured while extracting the archive.
Please try downloading the Adobe Flash Professional again.
No joke, I've downloaded it 17 times so far.
I really hope the next time I download it, it completes.
-Please post some help-
Thank you for readin' :)

Title of box:
and the Text of box do not count as the message, just telling
you specific information :).

Similar Messages

Error when Installing Eax-console as part of Audigy support pack 3.6

<div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem:
I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently I used 3.5 and 3.6 in both OS for a short time.
now I had to format my harddisk an have installed a clean version of Win XP SP3. I installed an update pack (winboard.org), the latest direct X and drivers for nvidia motherboard and videocard. Then, when I tried to install this support pack, I get an error messagge I-00 when eax-console should have been installed, something about CTengine being unable to be installed.
I read through many of the solutions here in the forum, since this error seems to be not so rare. But up to now, nothing helped. This is, what my install.log tells me:
[EAX Console]
GUID={5B7E626-7885-4FC3-A66A-73548A4F0FD}
Warning=I-008 CTRegSvr fails to register C:\Programme\Creative\EAX\Karaoke.exc.
[Common Audio Driver Interface]
GUID={700932B3-A964-4878-82A2-96054622AF7}
Warning=I-007 RegSvr32 fails to un-register C:\Programme\Creative\ShareDLL\CADI\ctcadi.dll.
All other install.log from the other parts of the pack contain no warning. Everything except the EAX-console works fine, if I try to start that, I get an error "No components are registered", an I don't have a "karaoke" register, but otherwise it works well, I can use the effects and cmss.
What the heck could I do?
I made an new thread, since nobody seamed to react to my post in the support pack thread.

HRe: Error when Installing Eax-console as part of Audigy support pack 3.6o What you have is a missing file, or perhaps your system is wanting to install direct X redistributable or something similar. Do a search on your system for install.log and when you find the newest one, or second to newest one, open it with notepad. It will tell you exactly what you are missing. I was trying to install some components for my Elite Pro and it said in the install.log that it could not find DXREDIST. So I copied a version I had to the installing program's folder and it worked!? So take a look at that log and see what is missing......write back with your results if you dont mind. In the original post I had seen the registration problems with components. You can manually run regsvr32 with the /? switch and see how to unregister that yourself and then try the installation again.
Cheers,
jmacguire

HT4759 getting hresult: 0x80070091 error when installing iCloud on vista sp2 pc

getting hresult: 0x80070091 error when installing iCloud on vista sp2 pc

There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.

I keep getting an windows installation error when installing icloud for windows 7. I have tried installing manually without success.

There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

ISScript error when installing Palm Desktop

I am recieving the following error when installing palm desktop for a z22:
"1:The InstallScript engine is missing from this machine. If availible, please run ISScript.msi, or contact your support personal for further assistance,"
I know the setup app uses ISScript 11 so I have downloaded and installed it, but it is failing still. Does anyone have other suggestions?
some other info:
Platform: Windows XP Pro
Thanks in advance.
Paul
Post relates to: Zire

follow the steps provided. this is related to your problem.
Error - 1607: Unable to Install InstallShield Scripting Run Time
Update to the Latest InstallShield Installation Engines
http://knowledge.macrovision.com/selfservice/viewContent.do?externalId=Q108322&sliceId=1
When running into installation issues, it is always recommended that you use the latest InstallShield installation engines. This article contains steps on how to download and install the latest InstallShield engines for the installation version you are trying to install.
What to do?
Follow the Troubleshooting steps below:
Determine if the installation is compressed or uncompressed.
Launch Windows Explorer by pressing the Windows key + E or select Start > Run and type explorer.
Browse to the location of the installation files. For example, if the installation is on a CD, browse to the CD-ROM drive.
Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc.
If the installation file is the only file in the directory (a single installation file), continue with the remaining suggestions in Step 1. Otherwise, if there are other files in the same directory as the installation file, continue to Step 2.
When a single installation file is run, it uncompresses the installation files into a temporary location (usually the Temp directory). Use these steps to find the installation in the temporary location:
Start the single installation file, but do not continue or cancel the installation dialogs.
Browse to the Temp directory. For further information on how to find the Temp directory, see Clean the Temp Directory.
Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc. The uncompressed installation file should contain other files in the same directory. Continue with step 2.
Right-click on the installation file that you are trying to install and select Properties.
In the Properties dialog, click on the Version tab.
Look at the File Version field to determine the version number of the InstallShield engine you need. Follow the instructions for your version. If you started the installation in Step 1d, cancel it.
If the file version number is 2.0x or less:
Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine.
Download IkernelUpdate.exe.
Once downloaded, double-click it. This installs the InstallShield engine for your installation.
If the file version number starts with 6:
Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine.
Download IkernelUpdate.exe.
Once downloaded, double-click it. This installs the InstallShield engine for your installation.
If the file version number starts with 7:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\7 from the machine.
Download ISScript7.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the ISScript engine for the version of the setup.
If No:
If the file version is less the 7.01
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0700 from the machine.
Download InstallShieldEngineUpdate700.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 7.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0701 from the machine.
Download InstallShieldEngineUpdate701.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 8:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\8 from the machine.
Download ISScript8.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript8.msi file. This installs the IsScript engine for this version of the installation.
If the file version number starts with 9:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\9 from the machine.
Download ISScript9.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
If the file version is less the 9.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\00 from the machine.
Download InstallShieldEngineUpdate900.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 9.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\01 from the machine.
Download InstallShieldEngineUpdate901.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 9.5:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine.
Download ISScript10.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If the file version number starts with 10:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine.
Download ISScript10.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
If the file version is less the 10.1 :
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\00 from the machine.
Download InstallShieldEngineUpdate1000.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 10.1 :
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\01 from the machine.
Download InstallShieldEngineUpdate1001.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 10.5:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\1050 from the machine.
Download ISScript1050.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\50 from the machine.
Download InstallShieldEngineUpdate1050.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 11:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\11 from the machine.
Download ISScript11.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\11\00 from the machine.
Download InstallShieldEngineUpdate1100.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
Post relates to: Treo 680 (Unlocked GSM)

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Getting an "installer failed to initialize" error when installing CS5 from CD

Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5

Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Error when Generating the Program

Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
"Error when generating the program" Message no. /SAPAPO/TSM141
Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
Possible causes:
1. The template has been corrupted
2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
Anyone encountered this error message and any possible solutions to this issue.
Thanks
Surender

I did find an ABAP Dump when looking at ST22. The short message is as follows:
Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
Date and Time          05/14/2007 19:33:54
Short text
     Jump distance is too large and cannot be generated.
What happened?
     A jump distance is too large and cannot be generated.
     A control structure or a routine with "CHECK" or "EXIT" contains
     too many ABAP statements.
     Error in the ABAP Application Program
     The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
      determined that
     within an ABAP event a control structure (for example, IF..ENDIF
     or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
     become too large. The resulting jump distance is too large so that
    it could no longer be generated.
    With the internal load format, the jump distance must not be
    greater than 32768 (this is the size of approximately 10.000
    ABAP statements).
    The jump distance that is to be generated, however, is 50885.
How to correct the error
   The ABAP application program must be changed.

Error when installing SM7 "The step runMigrationMonitor with step key "

Hi all
Please help for the following error when installing
ERROR 2009-06-13 00:27:13.515
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Regards
Kevin

Hi Uday
import.monitor.java.log
Loading of 'SASACONT1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 4, failed 0, total 29.
Import Monitor jobs: running 3, waiting 22, completed 4, failed 0, total 29.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 4, failed 1, total 29.
Loading of 'REPOSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 22, completed 4, failed 2, total 29.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 0, waiting 22, completed 4, failed 3, total 29.
Import Monitor jobs: running 1, waiting 21, completed 4, failed 3, total 29.
Import Monitor jobs: running 2, waiting 20, completed 4, failed 3, total 29.
Import Monitor jobs: running 3, waiting 19, completed 4, failed 3, total 29.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 2, waiting 19, completed 4, failed 4, total 29.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 1, waiting 19, completed 4, failed 5, total 29.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 19, completed 4, failed 6, total 29.
Import Monitor jobs: running 1, waiting 18, completed 4, failed 6, total 29.
Import Monitor jobs: running 2, waiting 17, completed 4, failed 6, total 29.
Import Monitor jobs: running 3, waiting 16, completed 4, failed 6, total 29.
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 2, waiting 16, completed 4, failed 7, total 29.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 16, completed 4, failed 8, total 29.
Loading of 'STERM_TEXT' import package: ERROR
Import Monitor jobs: running 0, waiting 16, completed 4, failed 9, total 29.
Import Monitor jobs: running 1, waiting 15, completed 4, failed 9, total 29.
Import Monitor jobs: running 2, waiting 14, completed 4, failed 9, total 29.
Import Monitor jobs: running 3, waiting 13, completed 4, failed 9, total 29.
Loading of 'SEOSUBCODF' import package: ERROR
Import Monitor jobs: running 2, waiting 13, completed 4, failed 10, total 29.
Loading of 'E071K' import package: ERROR
Import Monitor jobs: running 1, waiting 13, completed 4, failed 11, total 29.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 13, completed 4, failed 12, total 29.
Import Monitor jobs: running 1, waiting 12, completed 4, failed 12, total 29.
Import Monitor jobs: running 2, waiting 11, completed 4, failed 12, total 29.
Import Monitor jobs: running 3, waiting 10, completed 4, failed 12, total 29.
Loading of 'ATAB' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 4, failed 13, total 29.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 1, waiting 10, completed 4, failed 14, total 29.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 0, waiting 10, completed 4, failed 15, total 29.
Import Monitor jobs: running 1, waiting 9, completed 4, failed 15, total 29.
Import Monitor jobs: running 2, waiting 8, completed 4, failed 15, total 29.
Import Monitor jobs: running 3, waiting 7, completed 4, failed 15, total 29.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 7, completed 4, failed 16, total 29.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 1, waiting 7, completed 4, failed 17, total 29.
Loading of 'SAPSLEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 7, completed 4, failed 18, total 29.
Import Monitor jobs: running 1, waiting 6, completed 4, failed 18, total 29.
Import Monitor jobs: running 2, waiting 5, completed 4, failed 18, total 29.
Import Monitor jobs: running 3, waiting 4, completed 4, failed 18, total 29.
Loading of 'SAPDDIM' import package: ERROR
Import Monitor jobs: running 2, waiting 4, completed 4, failed 19, total 29.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 1, waiting 4, completed 4, failed 20, total 29.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 4, failed 21, total 29.
Import Monitor jobs: running 1, waiting 3, completed 4, failed 21, total 29.
Import Monitor jobs: running 2, waiting 2, completed 4, failed 21, total 29.
Import Monitor jobs: running 3, waiting 1, completed 4, failed 21, total 29.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 4, failed 22, total 29.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 4, fail
ed 23, total 29.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 4, failed 24, total 29.
Edited by: Kevin Wong on Jun 18, 2009 11:23 AM
Edited by: Kevin Wong on Jun 18, 2009 11:24 AM

Error when Installing Business Content BW 3.5

Hello Everyone,
When I "Drag n Drop" the infocube 0PS_C021, it shows following errors :
Object 0EMPLOYEE_EDUCATION (InfoSource,ISTD) could not be collected for object PA-PA-IO (Application,APCO)
Message no. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object PA-PA-IO of type Application,APCO have also been collected. Object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD was among these objects. This object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD, is not, however, available in the Metadata Repository.
Object '0EMPLOYEE_EDUCATION' (ISTD) of type 'InfoSource' is not available in version 'D'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '0EMPLOYEE_EDUCATION' (in transport request ISTD) of type 'InfoSource' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Please help me to solve these problems.
Regards
Sanjiv

Hi Sanjiv,
Check the below thread:
Error when Installing Business Content BW 3.5
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fbabd936493ee7e10000000a1553f7/content.htm
Reg
Pra

Oracle Application Server for SLES Linux error when install

I try install Oracle Application Server Infrastructure (as_linux_x86_portal_wireless_101202) on SLES:
1. I install orarun package.
2. Install patch 3167528 - remove entries from the "/etc/services"
error when install - the OPMN process manager failed to start.
I read opmn/logs: can't load shared library libdb.so.2...
I check /usr/bin/libdb.so and found libdb-4.3.so
I create simbolik link libdb.so.2 to libdb-4.3.so and retry install oracle Application Server Infrastructure, but have this error again.
I try install Oracle Application Server Infrastructure on several linux distribs, but have this error again adn again..
how I can fix this error? help mee pls..

I think that you need to download a patch for that error, this patch is just a library that you need create a link to it.
Follow this Metalink Note 790943.1
Greetings

Get_Block Error when installing an application

Hi all,
I tried to recover a backup I had made some days ago, and I got the following error when installing the application:
Error GET_BLOCK Error.
ORA-20001: GET_STMT error. ORA-20001: Execution of the statement was unsuccessful. ORA-06550: line 34, column 68: PLS-00103: Encountered the symbol &quot;&amp;&quot; when expecting one of the following: ) , * &amp; = - + &lt; / &gt; at in is mod remainder not rem &lt;an exponent (**)&gt; &lt;&gt; or != or ~= &gt;= &lt;= &lt;&gt; and or like like2 like4 likec between || multiset member submultiset <pre> &lt;br&gt;begin &lt;
I looked in the .sql application and searched for the "&quot;" or even for the symbols &" and I found nothing. I checked the character set and it seems right, the application is in UNICODE-UTF8 and the database is in UTF8 as well. I'm working with APEX version 4.1.1 and apex listener 1.1.
Has anyone got this error before, or does anyone have a tip on where to investigate?
Thanks in advance.
Elena.

For those who have gotten this error as well..
The problem was in the buttons Expand /Collapse that I had in some trees. I had them with a redirect url pointing to a javascript code like this:
javascript.apex.widget.tree.expand_all('id');I changed these buttons, I set an action "Defined by a Dynamic Action". This DA is called when the button is clicked and executes this javascript code:
apex.widget.tree.expand_all('id');Now it works. Hope it can help someone.
Elena.

I get an error when installing Call To Call

I always get this error when installing the Skype Call To Call toolbar:
"The installer has encountered an unexpected error installing this package,this may indicate a problem with this package.The Error code is 2738"
Help anyone?

Just in case, even though it's for a different error message, try the procedure from the following user tip:
"The administrator has set policies to prevent this installation" error messages when installing iTunes for Windows on Windows Vista and Windows 7 systems

Access Denied Error when Installing Suitcase

I am encountering an Access Denied Error when installing Suitcase X1 on a 600 MHz G3 ibook running 10.4.3 with all updates and it gets to 2 items remaining to be installed and I get access denied error and then another screen pops up and says "You do not have enough access privileges for this installation". I am logged in as an administrator, I tried creating a new Administrator account, I have repaired permissions, I have tried downloading a new file, all with no luck and now I am stuck. Any ideas?
G3 Pismo, G4 Desktop Mac OS X (10.4.3)

Hi,
Firstly, please let us know if it is a workgroup or domain environment.
Also, please let us know more details about the configurations of the server and clients.
Meanwhile, you can check the settings by referring to the following:
Allow someone to connect to your computer using Remote Desktop Connection
http://windows.microsoft.com/en-HK/windows7/allow-someone-to-connect-to-your-computer-using-remote-desktop-connection
Remote Desktop Connection: frequently asked questions
http://windows.microsoft.com/en-hk/windows/remote-desktop-connection-faq#1TC=windows-8
If issue persists, please provide us the unedited error message or screenshot for further research.
Thanks.
Jeremy Wu
TechNet Community Support

Jrew error when install 8i client in chinese win98

I got the following error when installing the 817 client to chinese win98.
JREW caused an invalid page fault in
module JAVAI.DLL at 0167:6ee3803a.
Registers:
EAX=00000060 CS=0167 EIP=6ee3803a EFLGS=00000206
EBX=c0000005 SS=016f ESP=0063ebf0 EBP=0063f184
ECX=c15089f0 DS=016f ESI=00000009 FS=3587
EDX=816aac84 ES=016f EDI=00000000 GS=0000
Bytes at CS:EIP:
8b 4f 3c 33 c0 03 cf 2b f7 66 8b 41 14 33 d2 66
Stack dump:
0063f184 0063f2a0 0063f1c8 c0000005 00000000 00000000 00000000 00400000 00010000 00000000 00020000 6ee37ac9 00000009 0063edb8 00000104 0063ec58
How to resolve it ?

1. Yes, it's a distributed installation. I choose ABAP stack installation and then choose Java installation as add in.
2. Yes, J2EE_ADMIN & J2EE_GUEST can log on to system with password james123.
3. In usercheck log file, it contains a part of information of sapinst.log, shows below.
java.lang.ClassNotFoundException: com.sap.security.tools.UserCheck
        at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
        at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
        at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)

Error when installing following program

Similar Messages

Maybe you are looking for