Error when installing jam pack/audio content on new imac

Keep trying to install the audio/jam pack cd´s that came with my Logic Studio bundle on my new Imac/Leopard. When i´m almost done installing, it asks for the "logic" cd and then after a while i´m getting an error "installation failed"- disk corrupted" or something? I cannot as it works now find (almost) any of the audio files that i´m using (brass/horn sounds etc..). Anyone who´s had the same experience?
Thanks!

Also seeing this problem. I'm updating to latest logic and 10.5.3 right now to see if it mitigates it.

Similar Messages

Jam pack & audio content

I run a mac pro and logic in my studio, both up to date. I tossed my office PC into the trash. I'm now officially done with PC'S. Went with the IMAC.
Processor Name: Intel Core 2 Duo
Processor Speed: 3.06 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 3 MB
Memory: 4 GB
Bus Speed: 1.07 GHz
Boot ROM Version: IM101.00CC.B00
SMC Version (system): 1.53f13
My question is. Can I load The Jam pack & audio content from my logic 9 update discs into the new IMAC to use in garage band just to fiddle around. While I have nothing to do in my office!! This would be great. Thanks Bill

cowbell bill wrote:
My question is. Can I load The Jam pack & audio content from my logic 9 update discs into the new IMAC to use in garage band just to fiddle around.
Personally I did not tried yet with Logic contents disks but you can try using the shareware Pacifist app, which must do what you want.
!http://img59.imageshack.us/img59/4967/aglogo45.gif!

Installed Jam Pack but see no new loops in Garageband loop browser. Why not?

I successfully installed Jam Pack but don't see new loops in Garageband loop browser. Is there some extra step I'm supposed to do? Before, I had about 57 Rock/Blues loops, and I still have just that. I had 14 instruments under All Drums, and guess what? Still only 14.
I know the install completed successfully - it said so, anyway.
Clues?

Have you filters set on the Loop Browser? Make sure the GarageBand Preference "Loops > Keyword Browsing > Filter for more relevant content" is off. Otherwise you will see a fraction of the available loops.
To see, if the JamPack has been installed, set the pop-up meu at the top of the Loop Browser to "Rhythm Section". Is that available?
Did you reindex your Loops after installing the Jam Pack? And did you restart the Mac? In Mt. Lion only restarting a Mac will ensure, that an application is not resumed from a cache, when you launch it again.Restarting the Mac will terminate GarageBand for sure.
If restarting the Mac does not make the JamPack Loops show, rebuild the Loop index. See: Rebuilding the Loop Index in GarageBand 6 or earlier - Apple Support

Error when install maintenance pack 2

I install maintenance pack 2 today. It stops at BR688701_01.dms. The error is:
Started: Thu Jul 30 12:20:14 2009
Data Mover Release: 8.49
Database: PSDB (ENG)
SQL Error. Error Position: 36 Return: 904 - ORA-00904: "YEAR": 标识符无UPDATE PS_GPBR_RC_IREN SET YEARCD = YEAR
Error: SQL execute error for UPDATE PS_GPBR_RC_IREN SET YEARCD = YEAR
Ended: Thu Jul 30 12:20:14 2009
Unsuccessful completion
PeopleTools 8.49 - Data Mover
Copyright (c) 2009 PeopleSoft, Inc.
All Rights Reserved
Started: Thu Jul 30 12:20:14 2009
Data Mover Release: 8.49
Database: PSDB (ENG)
Message Set Number: 200
Message Number: 0
Message Reason: File: Data MoverSQL error. Stmt #: 0 Error Position: 36 Return: 904 - ORA-00904: "YEAR": 标识符无效
Failed SQL stmt:UPDATE PS_GPBR_RC_IREN SET YEARCD = YEAR (200,0)
SQL Error. Error Position: 36 Return: 904 - ORA-00904: "YEAR": 标识符无效
UPDATE PS_GPBR_RC_IREN SET YEARCD = YEAR
Error: SQL execute error for UPDATE PS_GPBR_RC_IREN SET YEARCD = YEAR
Ended: Thu Jul 30 12:20:14 2009
Unsuccessful completion
I find that the table PS_GPBR_RC_IREN has no row.
My entironment :
RedHat4
weblogic 9.2
oracle database 10.2.0.1
peopletools 8.49
hrms and campus solution 9.0
Edited by: hzg on Jul 30, 2009 12:25 PM

Yes, the column name is correct. When the error happened, I fond that the content of the BR688701_01.dms is:
UPDATE PS_GPBR_RC_IREN SET YEARCD = YEAR;
UPDATE PS_GPBR_SEFIP_EFDT SET YEARCD = YEAR;
UPDATE PS_GPBR_SEFIP_PARM SET YEARCD = YEAR;
UPDATE PS_GPBR_SERV_T_DT SET YEARCD = YEAR;
UPDATE PS_GPBR_SERV_T_DTA SET YEARCD = YEAR;
UPDATE PS_GPBR_SERV_T_DTL SET YEARCD = YEAR;
UPDATE PS_GPBR_STAKER_DTA SET YEARCD = YEAR;
UPDATE PS_GPBR_STAKER_MST SET YEARCD = YEAR;
I thought the error may be caused by the ‘YEAR’. However, I found that the tables had no row. So the command ‘UPDATE’cann’t execute. Does it mean I can skip this step?

License error when trying to reading purchased content on new computer

I have changed computers from the original purchase and license of a number of commercial text books. I have copied the "old" licensed content to a new computer but receive an error when I try to open the "old" content on the new computer. The error message indicates that I'm supposed to contact the original vendor and download the material again. Isn't there another/better way?

In addition to the manual method you are trying, there are a number of third party utilities that you can use to retrieve the music files and playlists from your iPod. You'll find that they have varying degrees of functionality and some will transfer movies, videos, photos, podcasts and games as well. Have a look at the web pages and documentation, this is just a small selection of what's available (check for the one's that have been upgraded to be Vista compatible). You can also read reviews of some of them here: Wired News - Rescue Your Stranded Tunes
TuneJack Windows Only
iPod2PC Windows Only
iGadget Windows Only
iDump Windows Only
iRepo Windows Only
iPodRip Mac & Windows
YamiPod Mac and Windows Versions
Music Rescue Mac & Windows
iPodCopy Mac and Windows Versions

"unrecognizable file format" error when trying to import 5S videos onto new iMac 27"

For some reason, all of my videos I have taken the past couple months will not import onto our home Mac; getting above error codes for each one. Photos seem to import okay...usually. Any ideas? iMac is brand new and both have allo updated software. Never had this problem before...

See Here for Importing Photos:
http://support.apple.com/kb/HT4083
And Here:
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Error when installing "contents of this disk cannot be changed".

I'm getting this error when installing Snow Leopard, 'The contents of this disk cannot be changed'.
Any ideas?

Install 10.5.8 COMBO update, then try SL.

Error when Installing Eax-console as part of Audigy support pack 3.6

<div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem:
I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently I used 3.5 and 3.6 in both OS for a short time.
now I had to format my harddisk an have installed a clean version of Win XP SP3. I installed an update pack (winboard.org), the latest direct X and drivers for nvidia motherboard and videocard. Then, when I tried to install this support pack, I get an error messagge I-00 when eax-console should have been installed, something about CTengine being unable to be installed.
I read through many of the solutions here in the forum, since this error seems to be not so rare. But up to now, nothing helped. This is, what my install.log tells me:
[EAX Console]
GUID={5B7E626-7885-4FC3-A66A-73548A4F0FD}
Warning=I-008 CTRegSvr fails to register C:\Programme\Creative\EAX\Karaoke.exc.
[Common Audio Driver Interface]
GUID={700932B3-A964-4878-82A2-96054622AF7}
Warning=I-007 RegSvr32 fails to un-register C:\Programme\Creative\ShareDLL\CADI\ctcadi.dll.
All other install.log from the other parts of the pack contain no warning. Everything except the EAX-console works fine, if I try to start that, I get an error "No components are registered", an I don't have a "karaoke" register, but otherwise it works well, I can use the effects and cmss.
What the heck could I do?
I made an new thread, since nobody seamed to react to my post in the support pack thread.

HRe: Error when Installing Eax-console as part of Audigy support pack 3.6o What you have is a missing file, or perhaps your system is wanting to install direct X redistributable or something similar. Do a search on your system for install.log and when you find the newest one, or second to newest one, open it with notepad. It will tell you exactly what you are missing. I was trying to install some components for my Elite Pro and it said in the install.log that it could not find DXREDIST. So I copied a version I had to the installing program's folder and it worked!? So take a look at that log and see what is missing......write back with your results if you dont mind. In the original post I had seen the registration problems with components. You can manually run regsvr32 with the /? switch and see how to unregister that yourself and then try the installation again.
Cheers,
jmacguire

Error when Installing Business Content BW 3.5

Hello Everyone,
When I "Drag n Drop" the infocube 0PS_C021, it shows following errors :
Object 0EMPLOYEE_EDUCATION (InfoSource,ISTD) could not be collected for object PA-PA-IO (Application,APCO)
Message no. RSO296
Diagnosis
You have collected objects in the BW Metadata Repository. Associated objects for the object PA-PA-IO of type Application,APCO have also been collected. Object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD was among these objects. This object 0EMPLOYEE_EDUCATION of type InfoSource,ISTD, is not, however, available in the Metadata Repository.
Object '0EMPLOYEE_EDUCATION' (ISTD) of type 'InfoSource' is not available in version 'D'
Message no. RSO252
Diagnosis
You wanted to generate an object with the name '0EMPLOYEE_EDUCATION' (in transport request ISTD) of type 'InfoSource' (TLOGO). This is, however, not available in the BW Repository database. It does not exist in the requested version D. If the version is 'D' then it is possible that an error arose during the delivery or installation. If the version is 'A' then the Object was either not created or not activated.
Please help me to solve these problems.
Regards
Sanjiv

Hi Sanjiv,
Check the below thread:
Error when Installing Business Content BW 3.5
http://help.sap.com/saphelp_nw2004s/helpdata/en/42/fbabd936493ee7e10000000a1553f7/content.htm
Reg
Pra

Getting error when installing CR XI R2 Service Pack 5

I am getting an error when installing CR XI R2 SP5 (cabinet file m148.cab missing or corrupt). I am downloading it from the Downloads section of the SAP Community Network.
Does anyone know where I can get another copy of this service pack?

Hi
If you are using Windows 2000 SP4 then install the "Update Rollup 1 for Windows 2000 SP4 (KB891861)" should resolve the error message for missing cabinet file when installing SP4 on Windows 2000, as stated in Release Notes of SP4.
Below is the link to download the Update Rollup 1 for Windows 2000 SP4 (KB891861):
http://www.microsoft.com/downloads/details.aspx?FamilyID=B54730CF-8850-4531-B52B-BF28B324C662&displaylang=en and http://support.microsoft.com/?kbid=891861
Then install SP5 for Crystal Report XI R2.
Hope this helps!!
Regards
Sourashree

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

Error when installing SDK on BW platform

We have successfully installed SDK to our DS client, but get an error when installing the extensions on the BW platform (SP12):
I understand that I need to reboot the portal server, but the error message indicate that the issue will not be resolved. Any suggestions?

Hi,
it could be that the depending extension was unpacked while installing the extension pack.
please go to folder C:\user\..\Analysis-config\plugins and check if the extension jar-file is available. If there is only a folder with the extension name you have to delete this folder,
uninstall the extension pack in your Design Studio (client side),
go to Eclipse and check the "Unpack after installing" checkbox in your project Features,
if it is checked please unckeck it,
export your extension pack to zip-file,
install your extenion pack again on client side,
now the jar-file should be available.
You sholud deploy your extension on Server without any errors.
kind regards
Patrick

Mount error when installing xcode 3 and iOS 4

Hi,
I ran into mount error when installing xcode 3.2.6 and iOS 4.3 downloaded from https://developer.apple.com/devcenter/download.action?path=/Developer_Tools/xcod e_3.2.6_and_ios_sdk_4.3__final/xcode_3.2.6_and_ios_sdk_4.3.dmg.
I work on Mac mini with Mac OS X 10.6.
Could anyone help? Thanks!
Regards,
Emily

Hi Ken,
Thanks for your advice! I would try to clean up for more free space. I just downloaded one dmg from another website linking to apple. I could successfully install that one, but very often the content in gdb window is empty. Even if the gdb works for some time initially, after loading some specific project, the gdb doesn't provide info any longer :-( Any idea?
It might be the best season in Shenzhen now. It is sunny, but not hot, with temperature from 25 degree centigrade to 30.
Regards,
Emily

Get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script

get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script
Also tried to chang places.sql or what ever to my back up .json file and that wouldnt work. Is there a way to just move my backup .json file some where my bookmarks are a bigger file and i t will take a bit to upload.

A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in the debugger, or let the script continue.
Script: chrome://browser/content/places/editBookmarkOverlay.js:909

Errors When Installing 0PUR_C01

Hi Friends,
I get the follwoing error when Installing this cube.
(1)Error when reading the update rules fr InfoCube 0DBDUNS_NUM, ISource 0DBDUNS_IMPORT_ATTR in vers.M
(2)Transfer rules 0RF_ARTHIER_ACT BWDCLNT100
(3) DataSource 0RF_ARTHIER_ACT for source system BWDCLNT100 is not available.
(4) Data source 0DBDUNS_IMPORT_ATTR not maintained
I tried to Install them from RSA5 , but they are not availble either, PLease advice,
Thanks in advance,

HEy Smily,
Try installing them from Business Content in RSA1.
These update rules etc need to be installed in BW from business content.
Also, data sources need to be installed from RSA5.
hope it helps...
Gaurav
Assign points if it helps**

Error when installing jam pack/audio content on new imac

Similar Messages

Maybe you are looking for