Error when installing latest GM45 integrated graphics drivers

I have a T400 64-bit Windows 7 machine with switchable graphics, model CTO 2764 . Current integrated graphic driver version is 8.15.10.1892.
I'm trying to update to latest driver version 8.15.10.1968, released 11/13/2009.
Following the installation notes, I changed the BIOS OS Detection for Switchable Graphics to Disabled and Graphics Device to Integrated Graphics. During the driver install, I'm getting the following error message: This computer does not meet the minimum requirements for installing the software.
Have tried several times, re-downloaded the package... still no change. Has anyone else experienced this error while updating their drivers?
Thanks!
T400 2764CTO
Windows 7 x64

It appears if you are unlucky enough to get ths recurrent fatal error(asI I have) and are not a pc tech, you have purchased a door stop. I have purchased hp printers for years but this will be the last. Like the previous consumer, I have wasted countless hours on this correction.... Will never happen again. I will not double the cost of the printer paying consultants who swoop in like vultures to correct the problem.

Similar Messages

Error when install latest ODB with Oracle Designer

I need to use Oracle Discoverer.
So I removed all traces of Oracle from my machine.
Installed Oracle Designer Suite.
It worked.
Then I installed Oracle Data Provider for .NET 9.2.0.2.102..
I got 2 errors during install. One was due to a service (OracleHomeAgent) which I shut down easily.
The other, was more trouble:
Error in writing to file C:\Oracle\Ora92\bin\oci.dll
I could find no more Oracle services to shut down.
Nor did an IISRESET release it .
So I told it to ignore copying that file.
Then it finished.
My web applications which use ODP seem to work fine.
But am I at risk for some error?
Why would OCI.DLL not allow itself to be installed?
Is that a problem?
thanks
David Kreth Allen

Most likely, some MS OS services, not Oracle services, are locking your oci.dll. Please refer to the following thread for a workaround.
Re: Can't install 9.2.0.4 Beta on WinXP - oci.dll is locked

Satellite A350 - error when installing latest Bios (64bit OS)

I can't figure out what is wrong: I'm trying to install the latest bios, bios-20090803144625 (64bit), on a Statellite 350 running Windows 7 RC. I get the following error from "Phoenig WinPhlash64": "Failed to receive system Bios information BCPSYS block signature was not found. Error code: -100"
I have also tried the 32bit installer without any luck.
I have tried to install in safe mode, but the installer will only run in "normal mode".
Any suggestions?
G

I believe you need to install the Value Added Package so the BIOS file can detect the hardware properly.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Error when installing the Integration Kit for SAP

Hello,
When installing the integration Kit I get the following error:
The installation of BO XI Integration for SAP Solutions cannot continue because WACS has been installed with BO Enterprise.
i have seen in BO-SAp Integration Kit Installation Error that I have to had selected the point Install Tomcat application server option, but I was not asked to.
I'm following the blog BusinessObjects and SAP - Part 1 of 4, and my installation screens are similar but not equal. for example, I fon't have the installation type new, but the quickk type. And I cannot select the database, too.
Of course the screen asking about the Web Application server with the option of installing the tomcat application server doesn't appear.
What have I done wrong?
What is the solution? Reinstalling everything but doing what?
Thanks and regards,
Ana.

Hi Ingo,
Yes, it is BO Edge.
I have deinstalled the BO Edge sw and now I have installed it again. This time I have selected the export installation type and I have select the TOMCAT. The installation has finished successfully, but when installing the SAP integration Kit, I have the same problem. The message about the WACS already installed appears again.
What else can I do?
Thanks and regards,
Ana.

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Error when Installing Eax-console as part of Audigy support pack 3.6

<div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem:
I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently I used 3.5 and 3.6 in both OS for a short time.
now I had to format my harddisk an have installed a clean version of Win XP SP3. I installed an update pack (winboard.org), the latest direct X and drivers for nvidia motherboard and videocard. Then, when I tried to install this support pack, I get an error messagge I-00 when eax-console should have been installed, something about CTengine being unable to be installed.
I read through many of the solutions here in the forum, since this error seems to be not so rare. But up to now, nothing helped. This is, what my install.log tells me:
[EAX Console]
GUID={5B7E626-7885-4FC3-A66A-73548A4F0FD}
Warning=I-008 CTRegSvr fails to register C:\Programme\Creative\EAX\Karaoke.exc.
[Common Audio Driver Interface]
GUID={700932B3-A964-4878-82A2-96054622AF7}
Warning=I-007 RegSvr32 fails to un-register C:\Programme\Creative\ShareDLL\CADI\ctcadi.dll.
All other install.log from the other parts of the pack contain no warning. Everything except the EAX-console works fine, if I try to start that, I get an error "No components are registered", an I don't have a "karaoke" register, but otherwise it works well, I can use the effects and cmss.
What the heck could I do?
I made an new thread, since nobody seamed to react to my post in the support pack thread.

HRe: Error when Installing Eax-console as part of Audigy support pack 3.6o What you have is a missing file, or perhaps your system is wanting to install direct X redistributable or something similar. Do a search on your system for install.log and when you find the newest one, or second to newest one, open it with notepad. It will tell you exactly what you are missing. I was trying to install some components for my Elite Pro and it said in the install.log that it could not find DXREDIST. So I copied a version I had to the installing program's folder and it worked!? So take a look at that log and see what is missing......write back with your results if you dont mind. In the original post I had seen the registration problems with components. You can manually run regsvr32 with the /? switch and see how to unregister that yourself and then try the installation again.
Cheers,
jmacguire

Having a constant error when downloading latest update for Illustrator CC, error message: Adobe Illustrator CC Latest Updates (December 2014) Installation failed. Error Code: U44M1P7

Having a constant error when downloading latest update for Illustrator CC, error message:
Adobe Illustrator CC Latest Updates (December 2014) Installation failed. Error Code: U44M1P7

U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

ISScript error when installing Palm Desktop

I am recieving the following error when installing palm desktop for a z22:
"1:The InstallScript engine is missing from this machine. If availible, please run ISScript.msi, or contact your support personal for further assistance,"
I know the setup app uses ISScript 11 so I have downloaded and installed it, but it is failing still. Does anyone have other suggestions?
some other info:
Platform: Windows XP Pro
Thanks in advance.
Paul
Post relates to: Zire

follow the steps provided. this is related to your problem.
Error - 1607: Unable to Install InstallShield Scripting Run Time
Update to the Latest InstallShield Installation Engines
http://knowledge.macrovision.com/selfservice/viewContent.do?externalId=Q108322&sliceId=1
When running into installation issues, it is always recommended that you use the latest InstallShield installation engines. This article contains steps on how to download and install the latest InstallShield engines for the installation version you are trying to install.
What to do?
Follow the Troubleshooting steps below:
Determine if the installation is compressed or uncompressed.
Launch Windows Explorer by pressing the Windows key + E or select Start > Run and type explorer.
Browse to the location of the installation files. For example, if the installation is on a CD, browse to the CD-ROM drive.
Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc.
If the installation file is the only file in the directory (a single installation file), continue with the remaining suggestions in Step 1. Otherwise, if there are other files in the same directory as the installation file, continue to Step 2.
When a single installation file is run, it uncompresses the installation files into a temporary location (usually the Temp directory). Use these steps to find the installation in the temporary location:
Start the single installation file, but do not continue or cancel the installation dialogs.
Browse to the Temp directory. For further information on how to find the Temp directory, see Clean the Temp Directory.
Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc. The uncompressed installation file should contain other files in the same directory. Continue with step 2.
Right-click on the installation file that you are trying to install and select Properties.
In the Properties dialog, click on the Version tab.
Look at the File Version field to determine the version number of the InstallShield engine you need. Follow the instructions for your version. If you started the installation in Step 1d, cancel it.
If the file version number is 2.0x or less:
Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine.
Download IkernelUpdate.exe.
Once downloaded, double-click it. This installs the InstallShield engine for your installation.
If the file version number starts with 6:
Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine.
Download IkernelUpdate.exe.
Once downloaded, double-click it. This installs the InstallShield engine for your installation.
If the file version number starts with 7:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\7 from the machine.
Download ISScript7.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the ISScript engine for the version of the setup.
If No:
If the file version is less the 7.01
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0700 from the machine.
Download InstallShieldEngineUpdate700.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 7.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0701 from the machine.
Download InstallShieldEngineUpdate701.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 8:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\8 from the machine.
Download ISScript8.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript8.msi file. This installs the IsScript engine for this version of the installation.
If the file version number starts with 9:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\9 from the machine.
Download ISScript9.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
If the file version is less the 9.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\00 from the machine.
Download InstallShieldEngineUpdate900.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 9.01:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\01 from the machine.
Download InstallShieldEngineUpdate901.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 9.5:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine.
Download ISScript10.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If the file version number starts with 10:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine.
Download ISScript10.zip
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
If the file version is less the 10.1 :
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\00 from the machine.
Download InstallShieldEngineUpdate1000.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version is greater than or equal to 10.1 :
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\01 from the machine.
Download InstallShieldEngineUpdate1001.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 10.5:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\1050 from the machine.
Download ISScript1050.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\50 from the machine.
Download InstallShieldEngineUpdate1050.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
If the file version number starts with 11:
Check if there is a file with a .msi extension in the same directory as the installation file.
If Yes:
Delete the folder C:\Program Files\Common Files\InstallShield\Driver\11 from the machine.
Download ISScript11.zip.
Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?.
Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
If No:
Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\11\00 from the machine.
Download InstallShieldEngineUpdate1100.exe.
Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
Post relates to: Treo 680 (Unlocked GSM)

Error when install Infrastructure 10g 10.1.2 in Windows2000 server

My environment:
RDBMS Version: 10.1.0.3.1
Operating System and Version: Windows2000 SP4
Product (i.e., OAS, IAS, etc): 10g AS Release 2
Product Version: 10.1.2
JDK Version: 1.4
I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
Subscriber Naming attribute: dc
Default Subscriber Name: server01
*** Resetting user DN and GUID information ...***
Done....
PL/SQL procedure successfully completed.
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
NLS_LANG character set = WE8MSWIN1252
NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
ERROR : Exception while configing SSO DAD :
oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
Please advice.
Thanks
Trung

I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Getting an "installer failed to initialize" error when installing CS5 from CD

Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5

Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Error when installing SDK on BW platform

We have successfully installed SDK to our DS client, but get an error when installing the extensions on the BW platform (SP12):
I understand that I need to reboot the portal server, but the error message indicate that the issue will not be resolved. Any suggestions?

Hi,
it could be that the depending extension was unpacked while installing the extension pack.
please go to folder C:\user\..\Analysis-config\plugins and check if the extension jar-file is available. If there is only a folder with the extension name you have to delete this folder,
uninstall the extension pack in your Design Studio (client side),
go to Eclipse and check the "Unpack after installing" checkbox in your project Features,
if it is checked please unckeck it,
export your extension pack to zip-file,
install your extenion pack again on client side,
now the jar-file should be available.
You sholud deploy your extension on Server without any errors.
kind regards
Patrick

Error when installing latest GM45 integrated graphics drivers

Similar Messages

Maybe you are looking for