Error when installing new wifi card. g50-70

Tired of having a crappy Realtek based wifi card I bought an Intel 7260 AC card as I'm upgrading my home network.
However when I install this industry standard m.2 card into it's industry standard m.2 slot and reboot.
I then get an Unauthorized Network Card message.
How do I fix this error message? It's just absurd.

Hi plupien79, welcome to the forum.
     According to your Hardware Maintenance Manual, page 80:
http://download.lenovo.com/consumer/mobiles_pub/lenovo_g_z_50_series_hmm.pdf
     These are the cards certified to work in your G50-70:
WirelessLan_Non_Intel, Ltn NFA335 1x1BN+BT4.0 PCIE M.2 WLAN FRU 20200558
WirelessLan_Non_Intel, Cbt BCM43142 1x1BN+BT4.0 PCIE M.2 WLAN FRU 20200557
WirelessLan_Non_Intel, Cbt RTL8723BE 1x1BN+BT4.0 PCIE M.2 WLAN FRU 20200570
WirelessLan_Non_Intel, Ltn NFA345 1x1AC+BT4.0 PCIE M.2 WLAN FRU 20200579
WirelessLan_Non_Intel, Cbt BCM43162 1x1AC+BT4.0 PCIE M.2 WLAN FRU 20200573
WirelessLan_Intel, Intel 3160 1x1AC+BT PCIE NGFF WLAN FRU 20200418
     Any other card will not pass the BIOS white list. Please note the FRU number for these cards. You can't install an "off the shelf" card, without the Lenovo branding. When buying a card, make sure it's expressly stated that it will work in a Lenovo Idea system.
Cheers
DragonRider
I'm DO'ing IT
Lenovo Y470 085525U 2nd generation Intel® Core™ i7-2630QM processor ( 2.00GHz 1333MHz 6MB )
IdeaCentre A520 Intel® Core™ i5-3230M processor ( 2.60GHz 2600MHz 3MB )
YOGA Tablet 2 Pro-1380F
X1 Carbon 2nd Gen (20A8) ThinkPad + T420

Similar Messages

Error when installing new font ?

When I try to install a new Z-font with SE73 from my c:\windows\font directory I get an error
True type table is missing PCLT
did I mis a step in the installation of a new font ??
how can I solve this, I can use the font in my sapscript but it doesn't print my font but the 'if not available' font instead which is helvetica
thanks already for vlauable input

thats a bit confusing, it's a red message but it says warning
I tried the other programm mentioned above but still I get the same warning.
in the report it's clear that the font installed is not used in the output on the screen. I can add the font in my sapscript but the output is not the font specified.
the font installed is Lucida sans EF which is part of the 'company' style but till now not yet implemented in SAP.
oops it's working now, new learning moment for me. never look at preview on screen for the kind of font you want to see , thanks for the input and confirmation of the procedure
Message was edited by:
A. de Smidt

Error when installing new license key

Hi, I am trying to install the license key for the Netweaver 7.01 Basis Test system with saplicense -install ifile=NSP.txt and am getting the following error message:
SAPLICENSE (Release 701) ERROR ***
     ERROR: Can not set DbSl trace function
     DETAILS: DbSlControl(DBSL_CMD_IMP_FUNC_SET) failed with return code 20
                     dbms_type = <db-type> (e.g. ora)
                     DIR_LIBRARY = <path to db-dll> (e.g. usr/sap/SID/SYS/exe/run)
Thanks for any help you can give.
The original license expired and I cannot log into the system any more so I can't use SLICENSE.

Hi,
Have you got the SAP License key by providing its relative proper Hardware key ? if its required get a new SAP License key again with its relative hardware key at SAP Service Market Place, , and apply it again by login with sap* user in client.
The variables DIR_LIBRARY & dbms_type are set correctly for the user Under which you are installing SAP license?
Have you tried the same activity with new Saplicense executable for 701 release ? Download new saplicense from SMP and try again.
Also do this at last.... Set your system date back to a date when the sap license was valid.... then reStart the system, log on to SAP client, go to transactoin SLICENSE, apply the new license using license file, verify the license application & then log off, change system date back to current date, and re-start sap system. The same activity you can do at command level also.
Regards,
Bhavik G. Shroff

Error when installing new version od adobe flash player

tried to install latest version of adobe flash player. a script error message at line # 1 missing object ...
HAPPENS when dowlonding the script an when runing it from the site

Thanks.
I'm using windows XP 32bit with explorer 8.
The current flash player version is 11.3.300.271
The error occurs after initialization and during the retrieve session.
The script error is missing object at line 1
Hanan

Disk read error when installing new OS on S10-2

Hello all.
I`ve looked thru this forum and knowledge base, but couldn`t find an answer so I`m appealing to the Lenovo community.
I recently purchased a S10-2 netbook in Mexico. Unfortunetely it`s in Spanish and I need English.(I`m writing a computer book and I need screen captures in English.) I don`t have a phone to call tech support or an external CD drive. I`ve sucessfully setup a dual boot with Ubuntu via USB flash drive. First I tried installing from a XP disk image (XP Pro and XP Home) using Power Iso, but when it rebooted, I received a disk read error. Then I tried extracting the installation files to the D-drive, rebooting to a command prompt, and installing directly. After going thru the initial setup screens, it went thru the motions of copying the installation files to the system, but when it rebooted, once again I received a disk read error.
Any help would be greatly appreciated.
Thanks.
Garry

run disk check before installing anything, you may have dead bad sectors on your hard disk.
if it's possible, remove your hard disk and install it under other computers.

Error when installing new iTunes, looking for administrator - but I am the administrator?

error 2426 appears, saying please log on as admin. I am the admin!

Hi,
Weird thing about outlook 2010 which I discovered is that it runs in less than an administrators permission. You have to right click on the icon and look inside to make it run as an administrator and you can make that permanent but it has some drawbacks. I assume that you are trying to delete or do something with the contacts that icloud couldn't sync. When you try to move them or delete them it says you don't have the permission. I ws working on another problem when I learned this by trial and error. Remember that Outlook can also run in safe mode by itself.
Anyway I don't know if that will help.
GR

System error when installing new itunes update

Cannot install latest itunes update...?

thats a bit confusing, it's a red message but it says warning
I tried the other programm mentioned above but still I get the same warning.
in the report it's clear that the font installed is not used in the output on the screen. I can add the font in my sapscript but the output is not the font specified.
the font installed is Lucida sans EF which is part of the 'company' style but till now not yet implemented in SAP.
oops it's working now, new learning moment for me. never look at preview on screen for the kind of font you want to see , thanks for the input and confirmation of the procedure
Message was edited by:
A. de Smidt

Error 2324 when installing new version

Got the following error when installing new version.
The installer has encountered an unexpected error. This may indicate a problem with this package. The error code is 2324
Also Tried to uninstall after this so I could install from scratch but that failed too. Now, iTunes is in a complete mess where I cannot use, uninstall or install.
No idea what to do now.

Greetings stain3565,
If you are having an issue with installing an update for iTunes for Windows, I would suggest that you troubleshoot using the steps in this article -
If you can't install or update iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Be well,
Brett L

HT1151 I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install

I keep getting an error message when installing new software that says "System extension cannot be used /system/library/extension/IoFireWireWDHID.kext was installed improperly" I have no idea what this means and all of my software seems to install okay

Hello Valerie Anderson,
I'm Harry from Norton Support team. Please check the information provided in a similar thread here:
https://discussions.apple.com/message/21854775#21854775
Let me know if this helps.
Thanks!
Harry

Error 322 when installing new router

I encounter this error when installing my new router. It says that my new router is not detected or something. Actually, after step 4, its says : New router or gateway not detected.
What should I do or check?
Thanks

Hey first of all try resetting the router reset button in such a way that power
light is blinking on the router & then do a complete network power
cycle i.e., unplug the power cables from the modem & from the router &
then plug in the power cable to the modem first once all the lights are
solid green you could plug in the power cable to the router & check out
it will definately work!!

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Problem with installing new line card 7600-SSC-400

Hi all,
I have a trouble when trying to install new line card 7600-SSC-400 on Cisco 6509. Here was the message displays on the screen after I finished installing the line card : "%C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 7, power not allowed: The image for the card is not bundled in image." I tried to install this line card on another slot, but it doesn't work. The attched item is logfile which I saved in the installing session. I don't know what I hvae to do now, please help me to resolve this problem !
Thanks so much,
Hieu

Hi Hieu,
You might want to run the following to see more detail of the error:
show diagnostic result module all detail
And I would also suggest that you reseat the 7600-SSC-400 line card firmly back to the switch, and check the status again.
If it's still showing the error, maybe you can try seating the module on a different slot, and check if you have the same issue.
If the issue still persist after reseating and testing it on different slot, then it might be a hardware issue, and you might want to open a TAC case to further investigate it.
Hope that helps.

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Error when installing app

I keep getting an error when installing some apps - unknown error (0xE8000013)
Anyone know what this is or why this is happening???
any help apreciated

leefilmer,
Have you tried the steps in article http://support.apple.com/kb/TS1702 ? Reporting the problem to the particular application developer may be helpful, since it seems to be occurring with some apps.
Oddly, the article I found documenting the error doesn't seem related to the issue you're experiencing: http://support.apple.com/kb/TS1266. Do you have a SIM PIN on your iPhone by chance?
Other than that, have you tried restoring your iPhone and setting it up as a new phone? More information can be found here: http://support.apple.com/kb/HT1414 .
Hope this helps,
Raleigh

Error when Installing Eax-console as part of Audigy support pack 3.6

<div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem:
I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently I used 3.5 and 3.6 in both OS for a short time.
now I had to format my harddisk an have installed a clean version of Win XP SP3. I installed an update pack (winboard.org), the latest direct X and drivers for nvidia motherboard and videocard. Then, when I tried to install this support pack, I get an error messagge I-00 when eax-console should have been installed, something about CTengine being unable to be installed.
I read through many of the solutions here in the forum, since this error seems to be not so rare. But up to now, nothing helped. This is, what my install.log tells me:
[EAX Console]
GUID={5B7E626-7885-4FC3-A66A-73548A4F0FD}
Warning=I-008 CTRegSvr fails to register C:\Programme\Creative\EAX\Karaoke.exc.
[Common Audio Driver Interface]
GUID={700932B3-A964-4878-82A2-96054622AF7}
Warning=I-007 RegSvr32 fails to un-register C:\Programme\Creative\ShareDLL\CADI\ctcadi.dll.
All other install.log from the other parts of the pack contain no warning. Everything except the EAX-console works fine, if I try to start that, I get an error "No components are registered", an I don't have a "karaoke" register, but otherwise it works well, I can use the effects and cmss.
What the heck could I do?
I made an new thread, since nobody seamed to react to my post in the support pack thread.

HRe: Error when Installing Eax-console as part of Audigy support pack 3.6o What you have is a missing file, or perhaps your system is wanting to install direct X redistributable or something similar. Do a search on your system for install.log and when you find the newest one, or second to newest one, open it with notepad. It will tell you exactly what you are missing. I was trying to install some components for my Elite Pro and it said in the install.log that it could not find DXREDIST. So I copied a version I had to the installing program's folder and it worked!? So take a look at that log and see what is missing......write back with your results if you dont mind. In the original post I had seen the registration problems with components. You can manually run regsvr32 with the /? switch and see how to unregister that yourself and then try the installation again.
Cheers,
jmacguire

Error when installing new wifi card. g50-70

Similar Messages

Maybe you are looking for