Error when installing NSP 7.02 = R3load.exe -testconnect rc = -1073740791

Hi,
I am trying to install NSP 7.02, but unfortunately I am stuck on an error.
The error comes when starting step u201CImport ABAPu201D.
The error is: u2018C:\usr\sap\NSP\SYS\exe\uc\NTI386\R3load.exe -testconnect' exits with error code -1073740791.
I already looked at the R3load.exe.log, but it is empty.
I am a developer and I donu2019t have a lot of knowledge about installing Netweaver, so I searched on the internet for a solution but I could not find it.
I did R3trans u2013d, and it returns the following:
This is r3trans version 6.19 (release 720 - 06.04.10 - 16:31:00 with UA1430.1 /
prepared for CSN 1287305).
unicode enabled version
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
r3trans finished (0012).
I have tried several things: The 64 bits version, The 32 bits version, starting the MAXDB: NSP manually from services. When I open SAPMMC I don't see a db instance, but I donu2019t know if it should be already there.
Every time it gives the same error, what can I do?
Thanks in advance,
Regards, Robin
Edited by: Robin Vleeschhouwer on Oct 27, 2011 4:37 PM

Hi Srikishan,
Thanks for your fast answer.
I installed MaxDB DMB GUI from the directory:  \NWABAPTRIAL70206_64\MAXDBTOOLS
and logged in with username u201Ccontrolu201D and used the password I gave in the installation.
This was new for me and I learned something new about database management. Thank you for that.
I solved the error but it was just a really stupid mistake from me.
A friend told me once that when installing Netweaver I have to put the date in the future so that the license wonu2019t expire . So before I installed Netweaver I set the date to 2099.
That was the problem, when I didnu2019t do that then there was no error message.
Again thanks for helping.
Regards, Robin
Edited by: Robin Vleeschhouwer on Oct 28, 2011 10:01 AM
Edited by: Robin on Oct 28, 2011 10:01 AM

Similar Messages

  • Error when install sap license with 'saplicense -install'

    Dear experts,
    Error when install sap license with 'saplicense -install':
    SAPLICENSE (Release 640) ERROR ***
        ERROR:   Can not set DbSl trace function
        DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
        RC-INFO: error loading dynamic db-library - check environment for:
                 dbms_type = <db-type>  (e.g. ora)
                 DIR_LIBRARY = <path to db-dll>  (e.g. /usr/sap/SID/SYS/exe/run)
    Could you gvie me any ieda?

    Another way is to open a command prompt as nspadm and run saplicense -install
    To do this follow the steps below
    Click "Start" -> "Run..." and enter:
    runas /u:nspadm cmd
    Enter nspadm's password. A command prompt appears running as user nspadm. Now change to \usr\sap\nsp\SYS\exe\run and run
    saplicense -install
    Hope this helps.
    Regards,
    Klause

  • TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    I get an apple application support error when installing itunes. It says uninstall and re-install.  Does not work.  same message.  What is a solution?

    Is that an error 2 message?
    If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Error when installing Media Sync

    I just got my first BlackBerry (Bold with v4.6.0.162) and am in the process of installing the destop software as outlined in this post:
    http://supportforums.blackberry.com/rim/board/message?board.id=BlackBerryDesktopSoftware&thread.id=3...
    I've installed the USB drivers, the Desktop Manager without Roxio Media Manager and was moving on to the installation of the Media Sync tool.
    When installing from within the Desktop Manager it stops working and shuts down.
    When installing from the downloaded BlackBerryMediaSync.exe file, I receive the following error message:
    "Setup could not locate the Software License Agreement information.  Setup cannot continue and will now exit."
    I'm working with a Dell, Vostro 1510, Vista Basic.  I've tried "run as administrator" and also when logged on as the administrator with the same results.
    Any thoughts or assistance will be greatly appreciated as I've not been able to track down this problem anywhere.

    Hi lighthouse007:
    Can you install Media Sync as a stand alone product?  (http://na.blackberry.com/eng/services/media/mediasync.jsp)
    Does it work if you launch it outside of Desktop Manager after you do this?  Does it work if launched from within Desktop Manager?
    Cheers
    M
    Need additional information on BlackBerry products?
    visit: http://www.blackberry.net

  • HT4759 getting hresult: 0x80070091 error when installing iCloud on vista sp2 pc

    getting hresult: 0x80070091 error when installing iCloud on vista sp2 pc

    There is a very long way which is removing anything related to Apple including stuff in the registry.
    The short way is as follows. It worked for me.
    I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
    1. Remove the Apple account from Outlook.  In my case a me.com account.
    2. Disconnect the connection to ICloud in the control panel of version 3.1.
    REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
    3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
    4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
    and C\Program Files\Common Files \Apple.  My computer is 64 bits.
    5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud.  I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
    6. then I was able to install ICloud 4 immediately.  Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

  • HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.

    I keep getting an windows installation error when installing icloud for windows 7.  I have tried installing manually without success.

    There is a very long way which is removing anything related to Apple including stuff in the registry.
    The short way is as follows. It worked for me.
    I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
    1. Remove the Apple account from Outlook.  In my case a me.com account.
    2. Disconnect the connection to ICloud in the control panel of version 3.1.
    REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
    3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
    4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
    and C\Program Files\Common Files \Apple.  My computer is 64 bits.
    5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud.  I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
    6. then I was able to install ICloud 4 immediately.  Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

  • Error number 207 error type SPECIFIC_CODE IMPORT ABAP phase error when install database instance

    IMPORT ABAP phase error when install database instance
    Error number 207 error type SPECIFIC_CODE.
    In phase   "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution? 
    Thanks in advance
    synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
    syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
    syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
    synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
    Account user="IboSap-PC\nspadm" does not exist.
    Failed action:  with parameters
    Error number 207 error type SPECIFIC_CODE

    It is not easy, really , it has taken many hours and at the End I got the problems,.
    so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
    without any problem.  In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
    I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
    anyway. thank you for all.
    Best Regards.

  • Red errors when installing 0ABC_CLASS

    Get many red errors when installing 0ABC_CLASS, one red error is "Table /BI0/OTABC_CLASS could not be activated"
    Note: 0ABC_CLASS does not contain any attribute, that means we don't have to find other InfoObjects which are attributes of 0ABC_CLASS to install to get rid of these red errors when installing 0ABC_CLASS.
    It's activated in a just installed BW 3.5, could it be any patch reason or some other reasons?
    Everyone's input is welcome!

    hey Eugene,
    Under SM21, these are system logs for today:
    Failed to write to file, error 0028
    > File: /usr/sap/QDW/DVEBMGS00/data/stat
    Perform rollback
    Run-time error "LOAD_PROGRAM_NOT_FOUND" occurred
    Database error -289 at EXE
    > SQL0289N Unable to allocate new pages in table space
    > "QDW#STABD". SQLSTATE=57011 row=1
    > Include RSCOLL00 line 0534.
    Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
    > Short dump "051107 070016 qd1sbwdb DDIC " generated
    Transaction Canceled 00 671 ( LOAD_PROGRAM_NOT_FOUND 20051107070016qd1sbwdb DDIC 0001 )
    Perform rollback
    Database error -289 at EXE
    > SQL0289N Unable to allocate new pages in table space
    > "QDW#STABD". SQLSTATE=57011
    Database error -289 at EXE
    Database error -289 at EXE
    > SQL0289N Unable to allocate new pages in table space
    > "QDW#STABD". SQLSTATE=57011
    Database error -289 at EXE
    Failed to write to file, error 0028
    > File: /usr/sap/QDW/DVEBMGS00/data/stat
    Perform rollback
    Run-time error "LOAD_PROGRAM_NOT_FOUND" occurred
    Database error -289 at EXE
    > SQL0289N Unable to allocate new pages in table space
    > "QDW#STABD". SQLSTATE=57011 row=1
    > Include RSCOLL00 line 0534.
    Run-time error "DBIF_DSQL2_SQL_ERROR" occurred
    > Short dump "051107 080013 qd1sbwdb DDIC " generated
    Transaction Canceled 00 671 ( LOAD_PROGRAM_NOT_FOUND 20051107080013qd1sbwdb DDIC 0001 )
    Perform rollback

  • ISScript error when installing Palm Desktop

    I am recieving the following error when installing palm desktop for a z22:
    "1:The InstallScript engine is missing from this machine. If availible, please run ISScript.msi, or contact your support personal for further assistance,"
    I know the setup app uses ISScript 11 so I have downloaded and installed it, but it is failing still. Does anyone have other suggestions?
    some other info:
    Platform: Windows XP Pro
    Thanks in advance.
    Paul 
    Post relates to: Zire

    follow the steps provided. this is related to your problem.  
    Error - 1607: Unable to Install InstallShield Scripting Run Time
    Update to the Latest InstallShield Installation Engines
    http://knowledge.macrovision.com/selfservice/viewContent.do?externalId=Q108322&sliceId=1
    When running into installation issues, it is always recommended that you use the latest InstallShield installation engines. This article contains steps on how to download and install the latest InstallShield engines for the installation version you are trying to install.
    What to do?
    Follow the Troubleshooting steps below:
    Determine if the installation is compressed or uncompressed. 
    Launch Windows Explorer by pressing the Windows key + E or select Start > Run and type explorer. 
    Browse to the location of the installation files. For example, if the installation is on a CD, browse to the CD-ROM drive. 
    Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc. 
    If the installation file is the only file in the directory (a single installation file), continue with the remaining suggestions in Step 1. Otherwise, if there are other files in the same directory as the installation file, continue to Step 2. 
    When a single installation file is run, it uncompresses the installation files into a temporary location (usually the Temp directory). Use these steps to find the installation in the temporary location:
    Start the single installation file, but do not continue or cancel the installation dialogs. 
    Browse to the Temp directory. For further information on how to find the Temp directory, see Clean the Temp Directory. 
    Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc. The uncompressed installation file should contain other files in the same directory. Continue with step 2.
    Right-click on the installation file that you are trying to install and select Properties. 
    In the Properties dialog, click on the Version tab. 
    Look at the File Version field to determine the version number of the InstallShield engine you need. Follow the instructions for your version. If you started the installation in Step 1d, cancel it.
    If the file version number is 2.0x or less:
    Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine. 
    Download IkernelUpdate.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for your installation.
    If the file version number starts with 6:
    Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine. 
    Download IkernelUpdate.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for your installation.
    If the file version number starts with 7:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\7 from the machine. 
    Download ISScript7.zip. 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the ISScript engine for the version of the setup.
    If No:
    If the file version is less the 7.01 
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0700 from the machine. 
    Download InstallShieldEngineUpdate700.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version is greater than or equal to 7.01: 
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0701 from the machine. 
    Download InstallShieldEngineUpdate701.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version number starts with 8:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\8 from the machine. 
    Download ISScript8.zip. 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript8.msi file. This installs the IsScript engine for this version of the installation.
    If the file version number starts with 9:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\9 from the machine. 
    Download ISScript9.zip
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If No:
    If the file version is less the 9.01: 
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\00 from the machine. 
    Download InstallShieldEngineUpdate900.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version is greater than or equal to 9.01: 
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\01 from the machine. 
    Download InstallShieldEngineUpdate901.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version number starts with 9.5:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine. 
    Download ISScript10.zip 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If the file version number starts with 10:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine. 
    Download ISScript10.zip
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If No:
    If the file version is less the 10.1 :
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\00 from the machine. 
    Download InstallShieldEngineUpdate1000.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version is greater than or equal to 10.1 :
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\01 from the machine. 
    Download InstallShieldEngineUpdate1001.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version number starts with 10.5:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\1050 from the machine. 
    Download ISScript1050.zip. 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If No:
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\50 from the machine. 
    Download InstallShieldEngineUpdate1050.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version number starts with 11:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\11 from the machine. 
    Download ISScript11.zip. 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If No:
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\11\00 from the machine. 
    Download InstallShieldEngineUpdate1100.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation. 
    Post relates to: Treo 680 (Unlocked GSM)

  • Error when install Infrastructure 10g 10.1.2 in Windows2000 server

    My environment:
    RDBMS Version: 10.1.0.3.1
    Operating System and Version: Windows2000 SP4
    Product (i.e., OAS, IAS, etc): 10g AS Release 2
    Product Version: 10.1.2
    JDK Version: 1.4
    I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
    Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
    Subscriber Naming attribute: dc
    Default Subscriber Name: server01
    *** Resetting user DN and GUID information ...***
    Done....
    PL/SQL procedure successfully completed.
    No errors.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
    With the Partitioning, Real Application Clusters, OLAP and Data Mining options
    NLS_LANG character set = WE8MSWIN1252
    NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
    ERROR : Exception while configing SSO DAD :
    oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
    at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
    at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
    Please advice.
    Thanks
    Trung

    I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
    When you get the error, start OID using the command line then try running the config assistant again.
    Hope this helps
    Alex

  • ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    ?I am getting an error when installing on my dell inspiron with latest updates for drivers.  Error 1406.  I have the problem with Scan Snap software and a full version of reader.

    Error 1402 | Error 1406 | Acrobat, Reader

  • What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

    Hello,
    My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
    The complete error message is:
    Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
    What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
    What I did already:
    check my RAM (16go gskill)
    remove unnecessary hard drives
    replace my "old" SSD with a clean new one
    remove my sound cards
    remove the mouse and use only keyboard
    reset the BIOS
    check every LED on the motherboard (asus sabertooth z77) and there is no problem
    What are the problems?
    Thanks,
    Adrien.

    Hi,
    If all images cannot be installed, we have a reason to suspect the hardware cause.
    If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
    Alex Zhao
    TechNet Community Support

  • Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

    I posted this in the Microsoft Community forums and was redirected here.
    Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
    Hello,
    In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
    I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
    so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
    start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
    I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
    So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
    this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
    the Windows logo and throbber, some error like this appeared:
    Fatal Error Performing Update Operation # of ##: ERROR CODE
    It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
    However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
    your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
    I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
    As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
    Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
    which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
    Thanks in advance to anyone who can help!
    So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
    If anyone here has any more specific ideas, lemme hear 'em.
    Thanks!

    To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
    you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
    this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
    answer.
    I will continue to update this thread as I try new things and get more information.
    Thank you.

  • Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

    I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
    UnsatisfiedLinkError exception loading native library: njni10
    Configuration assistant "Oracle Net Configuration Assistant" failed
    The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

    Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

  • Getting an "installer failed to initialize" error when installing CS5 from CD

    Getting an "installer failed to initialize" error when installing CS5 from CD
    Mac OS X Version 10.7.5

    Try using the Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html
    If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
    CS5:
    http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Maybe you are looking for

  • -69 Error Message After Update

    Has anyone else gotten the -69 error message since they downloaded the most recent update? I can't get any of my new downloads (movies or music) to transfer from the computer to my IPOD. I'm very frustrated and would appreciate any help that you can

  • Need to Restore - HELP Please

    Yesterday my IPOD quit working and I got the sad icon with the ! I managed to get into the disk mode and hooked it up to my laptop and it synched. I used it today and it quit working after about 20 minutes. Will somebody please let me know what to ex

  • 2.5" external enclosure (bus powered) any thoughts, experience, suggestions

    I'm about to purchase a bigger hard drive for my macbook, I thought I could put the old one in an external enclosure that's bus powered, any experience with that ? I'm thinking about the Bytecc BT-280SATA but couldn't find it here in Quebec, Canada.

  • PDF viewer widget

    Anyone has found a way to display PDFs using an HTML widget? The only way I've found that works reasonably well is to covert the PDF pages to individual images (using any of the many utilities that can do that) and use a JQuery slider to display the

  • Correct long lasting bugs

    This is really the feature that I would need most. No bugs I have submitted since I am using Framemaker (version 3 !) where ever corrected. One example: If a word contains a non breaking space, it will never be hyphenated. This is a bug because in so