Error when installing on Macbook Pro

I have some trouble when installing Final Cut Express HD on My Macbook Pro (intel duo core processor). It says some hardware is missing - AGP graphic card. I've search for the solution on Apple Support before and I found that there is an update 3.0.1 which could be fixed this problem directly. When I install this update, it says "it's no need for this update on this computer". What should I do now? Many thanks for responds.
  Mac OS X (10.3.9)  

FCE is not supposed to work on the new Intel Macs but there are workarounds.
The simplest is to just press the "esc" key when you get the error message.
Let me know if it works for you.
A new version of FCE is due soon which will work on both the old and new Macs.
Ian.

Similar Messages

  • New HDD formatted externally but reverts when installed in MacBook Pro

    Hello! I apologize if this is really long. I'm hoping someone can help me out!
    My MacBook Pro recently crashed. I woke it from sleep one evening and was greeted with a flashing folder & question mark. I ended up using this as an excuse to upgrade  from the original 500gb HDD and purchased a new 1TB Seagate HDD (Model : STBD1000100 ) I installed the new HDD and booted from the Internet Recovery system. From there I entered Disc Utility and tried to format the HDD. No luck. When I would try to partition it how I was supposed to, it gives me an error saying it cannot create a partition or even erase the drive. After searching this site, I found a tutorial on how to do it external. I put the new HDD into a case and plugged it in via USB. From here I was able to format the HDD and even install OSX Lion (this is what my Mac came with.). After formatting and installing the operating system, I reinstalled the HDD into my Mac. I plugged in the external HDD I have been using since the crash & opened up start up disk. When the options came up, the new HDD wasn't there! I went into Disk Utility again to make sure it was at least recognizing the HDD. DU showed the hard drive but when I clicked on it, it said the drive was unformatted and the partition I had made previously was now renamed and grayed out. I can't modify it in anyway.
    Am I doing something wrong? Can someone give me the steps on how to properly do this if I am doing it wrong? Or, could it be my SATA cable?
    Thanks for reading!
    Macbook Pro-> Mid 2012
    Error Message Given in Disk Utility -> "Wiping volume data to prevent future accidental probing failed."

    If you take the new 1 TB HDD out and connect it to the MBP via USB, will it boot the MBP?  If so the internal SATA cable is in all probability the offender.  First try the poor man's approach:
    http://macperformanceguide.com/blog/2011/20110415_1_Tinfoilfix--howto.html
    If no success, then a new SATA cable will probably be required,  An Apple store genius bar appointment will confirm this.
    Ciao.

  • Error when installing Acrobat 11 Pro under Mac OS 10.8.3

    When trying to install Acrobat 11 Pro on my iMac (2.5 GHz Intel Core i5, 8 GB RAM, OS 10.8.3) I get an error message saying "installation failed" during the "validating packages" process. The software seems to run o.k., but I'm unable to apply any updates. Any suggestions?

    To investigate problem at our end, we require following logs:
    1) /private/var/log/install.log
    2) /tmp/oobelib.log
    3) /tmp/amt3.log
    4) ~/Library/Logs/PDApp.log
    (It might be that out of 2,3 and 4 a few are not present. Ignore those not present on the system)

  • Error when Installing Acrobat X Pro

    I am getting an error when I installed Acrobat X Pro. It says some optional component failed to install correctly.
    Bellow is the details it gave for the error. Thanks for any help you can offer.
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ... WARNING: DW066 ...
    -------------------------------------- Summary --------------------------------------
      - 0 fatal error(s), 3 error(s), 2 warning(s)
    WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0
    WARNING: DW066: OS requirements not met for {8706963D-5F48-47CC-998B-DAB70B089DB8} Suite Shared Configuration CS6 3.0.0.0
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: Error 1310.Error writing to file: C:\Config.Msi\57bded6.rbf.   Verify that you have access to that directory.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1310.Error writing to file: C:\Config.Msi\57bded6.rbf.   Verify that you have access to that directory.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed

    Same problem, everything was ok with other applicatiosn (PS, DW, Illustrator) but Acrobat X Pro does not install. I tried several times, followed some instructiosn for "CS4 does not install" and "error 1310", "error exit code 6". Nothing. I use Vista with sufficient parameters. here is my error message in detail:
    Exit Code: 6
    Please see specific errors and warnings below for troubleshooting. For example,  ERROR: DW050 ...
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 3 error(s), 0 warning(s)
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: Error 1310.Error writing to file: C:\Config.Msi\c4523a9.rbf.   Verify that you have access to that directory.
    ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
    MSI Error message: Error 1310.Error writing to file: C:\Config.Msi\c4523a9.rbf.   Verify that you have access to that directory.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed

  • Error when updating software macbook pro

    when I try to update software, it says "an error has occured and cannot update" then asks if I want to restart.

    Please detail all you have done to resolve your issue.  Need this information so that the users can avoid the "been there, done that" scenario type responses.  This is to avoid repeating the troubleshooting you may have already tried.  Thank you. 

  • Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"

    Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"

    Did you try more than once? If so:
    Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • Boot camp not recognize keyboard and mouse when installing windows 7 pro 64 bit

    Hi,
    I have some issue when installing windows 7 pro 64 bit using boot camp. after done partitioning the windows drive and when boot to windows installation process, i've got stuck in the first screen when choosing the language. it seems that the keyboard and mouse are not detected.
    i'm using boot camp ver. 5.0.
    does anyone have similar problem with me?

    I have finally successfully installed Windows 7 x64 on MacBook Air 13.3" (2013) thru Bootcamp.
    Problem:  After Windows 7 install thru BootCamp, I got to the first login screen and not input devices (Mouse, keyboard, USB) worked.   I tried to boot into Windows Safemode, but I received the error  "Windows can not complete installation in Safe Mode".
    Cause:  WIndows 7 does not have native USB 3.0 drivers, included on the install images.
    Resolution:  I downloaded the latest device drivers with thru BootCamp and copied them to the USB Flash Drive that had my bootable Windows 7 x64 install on it.  The second option in BootCamp is "Download Support Media".  This does more than just download drivers.  It creates a file called "autoattended.xml".  This is key as it tells Windows during the install process to use the device drivers that you download.  Otherwise, you need to do it manually, which you can't because you have no mouse or keyboard.
    NOTE:  I had no need of a super drive because I had all the files on one USB flash drive.  Therefore, I don't think it matter which side of the MBA the USB drive was plugged in, as other solutions suggested.

  • Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

    I posted this in the Microsoft Community forums and was redirected here.
    Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
    Hello,
    In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
    I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
    so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
    start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
    I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
    So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
    this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
    the Windows logo and throbber, some error like this appeared:
    Fatal Error Performing Update Operation # of ##: ERROR CODE
    It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
    However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
    your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
    I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
    As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
    Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
    which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
    Thanks in advance to anyone who can help!
    So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
    If anyone here has any more specific ideas, lemme hear 'em.
    Thanks!

    To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
    you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
    this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
    answer.
    I will continue to update this thread as I try new things and get more information.
    Thank you.

  • OS X Mavericks 10.9.1 can't be installed on MacBook Pro retina late 2013

    OS X Mavericks 10.9.1 can't be installed on MacBook Pro retina late 2013
    OS X Mavericks 10.9.1 installer is available in the App Store but it can't be downloaded because "OS X Mavericks can't be installed on this computer".
    If the installer of version 10.9 is already in the application folder it can't be updated for the same reason.
    I've seen that they are two versions of the updater that are downloadable from apple's website and one is specific for the MacBook Pro retina late 2013.
    I suspect that the installer in the App Store is not an universal installer. It is stupid because you can't reinstall that Mac is needed.
    I phoned to Apple (AppleCare) and they don't know why this happens.

    Hello,
    Try to boot the 15" MBPr as target when connected to your MBA (if you have the right cables and adapters).
    From the MBA, install on the 15" MBPr's disk, in that order :
    The 10.9.1 update for Mavericks except MBPr
    Download
    and then the 10.9.1 update for Mavericks specific for MBPr
    Download
    The MBPr should be bootable again. I did it for an external HD.
    Hope this helps.
    Best,
    ÉrIC Miclo

  • Error when Installing Eax-console as part of Audigy support pack 3.6

    <div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem:
    I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently I used 3.5 and 3.6 in both OS for a short time.
    now I had to format my harddisk an have installed a clean version of Win XP SP3. I installed an update pack (winboard.org), the latest direct X and drivers for nvidia motherboard and videocard. Then, when I tried to install this support pack, I get an error messagge I-00 when eax-console should have been installed, something about CTengine being unable to be installed.
    I read through many of the solutions here in the forum, since this error seems to be not so rare. But up to now, nothing helped. This is, what my install.log tells me:
    [EAX Console]
    GUID={5B7E626-7885-4FC3-A66A-73548A4F0FD}
    Warning=I-008 CTRegSvr fails to register C:\Programme\Creative\EAX\Karaoke.exc.
    [Common Audio Driver Interface]
    GUID={700932B3-A964-4878-82A2-96054622AF7}
    Warning=I-007 RegSvr32 fails to un-register C:\Programme\Creative\ShareDLL\CADI\ctcadi.dll.
    All other install.log from the other parts of the pack contain no warning. Everything except the EAX-console works fine, if I try to start that, I get an error "No components are registered", an I don't have a "karaoke" register, but otherwise it works well, I can use the effects and cmss.
    What the heck could I do?
    I made an new thread, since nobody seamed to react to my post in the support pack thread.

    HRe: Error when Installing Eax-console as part of Audigy support pack 3.6o What you have is a missing file, or perhaps your system is wanting to install direct X redistributable or something similar. Do a search on your system for install.log and when you find the newest one, or second to newest one, open it with notepad. It will tell you exactly what you are missing. I was trying to install some components for my Elite Pro and it said in the install.log that it could not find DXREDIST. So I copied a version I had to the installing program's folder and it worked!? So take a look at that log and see what is missing......write back with your results if you dont mind. In the original post I had seen the registration problems with components. You can manually run regsvr32 with the /? switch and see how to unregister that yourself and then try the installation again.
    Cheers,
    jmacguire

  • ISScript error when installing Palm Desktop

    I am recieving the following error when installing palm desktop for a z22:
    "1:The InstallScript engine is missing from this machine. If availible, please run ISScript.msi, or contact your support personal for further assistance,"
    I know the setup app uses ISScript 11 so I have downloaded and installed it, but it is failing still. Does anyone have other suggestions?
    some other info:
    Platform: Windows XP Pro
    Thanks in advance.
    Paul 
    Post relates to: Zire

    follow the steps provided. this is related to your problem.  
    Error - 1607: Unable to Install InstallShield Scripting Run Time
    Update to the Latest InstallShield Installation Engines
    http://knowledge.macrovision.com/selfservice/viewContent.do?externalId=Q108322&sliceId=1
    When running into installation issues, it is always recommended that you use the latest InstallShield installation engines. This article contains steps on how to download and install the latest InstallShield engines for the installation version you are trying to install.
    What to do?
    Follow the Troubleshooting steps below:
    Determine if the installation is compressed or uncompressed. 
    Launch Windows Explorer by pressing the Windows key + E or select Start > Run and type explorer. 
    Browse to the location of the installation files. For example, if the installation is on a CD, browse to the CD-ROM drive. 
    Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc. 
    If the installation file is the only file in the directory (a single installation file), continue with the remaining suggestions in Step 1. Otherwise, if there are other files in the same directory as the installation file, continue to Step 2. 
    When a single installation file is run, it uncompresses the installation files into a temporary location (usually the Temp directory). Use these steps to find the installation in the temporary location:
    Start the single installation file, but do not continue or cancel the installation dialogs. 
    Browse to the Temp directory. For further information on how to find the Temp directory, see Clean the Temp Directory. 
    Search for the installation file. The typical names for installation files are setup.exe, update.exe, installer.exe, etc. The uncompressed installation file should contain other files in the same directory. Continue with step 2.
    Right-click on the installation file that you are trying to install and select Properties. 
    In the Properties dialog, click on the Version tab. 
    Look at the File Version field to determine the version number of the InstallShield engine you need. Follow the instructions for your version. If you started the installation in Step 1d, cancel it.
    If the file version number is 2.0x or less:
    Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine. 
    Download IkernelUpdate.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for your installation.
    If the file version number starts with 6:
    Delete the folder C:\Program Files\Common Files\InstallShield\engine from the machine. 
    Download IkernelUpdate.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for your installation.
    If the file version number starts with 7:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\7 from the machine. 
    Download ISScript7.zip. 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the ISScript engine for the version of the setup.
    If No:
    If the file version is less the 7.01 
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0700 from the machine. 
    Download InstallShieldEngineUpdate700.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version is greater than or equal to 7.01: 
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\0701 from the machine. 
    Download InstallShieldEngineUpdate701.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version number starts with 8:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\8 from the machine. 
    Download ISScript8.zip. 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript8.msi file. This installs the IsScript engine for this version of the installation.
    If the file version number starts with 9:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\9 from the machine. 
    Download ISScript9.zip
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If No:
    If the file version is less the 9.01: 
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\00 from the machine. 
    Download InstallShieldEngineUpdate900.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version is greater than or equal to 9.01: 
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\09\01 from the machine. 
    Download InstallShieldEngineUpdate901.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version number starts with 9.5:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine. 
    Download ISScript10.zip 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If the file version number starts with 10:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\10 from the machine. 
    Download ISScript10.zip
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If No:
    If the file version is less the 10.1 :
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\00 from the machine. 
    Download InstallShieldEngineUpdate1000.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version is greater than or equal to 10.1 :
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\01 from the machine. 
    Download InstallShieldEngineUpdate1001.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version number starts with 10.5:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\1050 from the machine. 
    Download ISScript1050.zip. 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If No:
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\10\50 from the machine. 
    Download InstallShieldEngineUpdate1050.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation.
    If the file version number starts with 11:
    Check if there is a file with a .msi extension in the same directory as the installation file.
    If Yes:
    Delete the folder C:\Program Files\Common Files\InstallShield\Driver\11 from the machine. 
    Download ISScript11.zip. 
    Unzip this file. For more information on unzipping files, see How Do I Unzip a File in Windows XP? or How Do I Use the WinZip Utility in Windows 2000 or Earlier?. 
    Double-click the IsScript.msi file. This installs the IsScript engine for this version of the installation.
    If No:
    Delete the folder C:\Program Files\Common Files\InstallShield\Professional\RunTime\11\00 from the machine. 
    Download InstallShieldEngineUpdate1100.exe. 
    Once downloaded, double-click it. This installs the InstallShield engine for this version of the installation. 
    Post relates to: Treo 680 (Unlocked GSM)

  • Firefox 12 just installed on MacBook Pro, OSX 106.8. FF looks great, seems faster also. BUT, on tab menu, the small triangle (to list the tab info) is missing;

    Firefox 12 just installed on MacBook Pro, OSX 106.8. FF looks great, seems faster also. BUT, on tab menu, the small triangle (to list the tab info) is missing; I can't find a way to reinstall it using the View->Toolbars->Customise option. Can you help?

    You will only see the "List All Tabs" button in Firefox 12+ if there are that many tabs open that you get the Tab bar scroll buttons appearing.
    * Permanent List-all-tabs Button: https://addons.mozilla.org/firefox/addon/permanent-listalltabs/
    Bug 714281 - Show the all tabs button only when the tab strip overflows

  • HT1338 When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    When turning on Macbook pro laptop I receive a blank screen for a few seconds, then a folder with a ? is displayed  and remains as if the computer is now Frozen. Mac book  Pro leopard operating system. What can I do to get past the freeze?

    Could the disk have failed?
    Can you hear it?
    Boot from the install DVD and see what Disk Utility says.

  • HELP!  when installing Acrobat X Pro, the checkbox says "OS REQUIREMENTS NOT MET.?"

    HELP!  when installing Acrobat X Pro, the checkbox says "OS REQUIREMENTS NOT MET. CURRENT OS: WINDOWS VISTA SP0 64 BIT." SERVICE PACK 2 RECOMMENDED." 
    Then after install, it says fatal error 1603 --and im still stuck with adobe acrobat 9.

    mylenium,
    sorry.
    the issue is i run windows 7, but acrobat x thinks im on windows vista for some reason.
    the install goes all the way thru --and then gives the fatal error 1603.
    indd, illustrator and photoishop are on without issue....
    maybe there is a patch i need to try?
    thanks,
    chris
    (graphic designer 15 years)

  • When waking my macbook pro it sometimes takes 3 opening and closings to wake up

    when waking my macbook pro it sometimes takes 3 opening and closings to wake up. Why?

    I get something like this:
    1/19/14 7:26:22.557 PM configd[18]: DHCP en0: RENEW/REBIND transmit failed
    1/19/14 7:27:27.155 PM configd[18]: network changed: DNS* Proxy
    1/19/14 7:27:27.161 PM configd[18]: network changed: v4(en0!:192.168.25.113) DNS+ Proxy+ SMB
    That failed message recurs in Console while my MBP cannot connect to my wifi. The "network changed" messages correspond to the point when my MBP does finally connect.
    Here's another piece. I have Windows 8.1 installed through Boot Camp. When I run Windows, I get no wifi problems. I don't know how much that helps, but it's a piece of info!

Maybe you are looking for