Error when installing Oracle8i for Windows98

I got an error when Oracle8i for Windows 98 was finished with its install. I ignored the error and tried using the database. Everything seems to work fine. Has anyone encountered this error. Does anyone think this will cause a problem in the future, if so, any suggestions to fix the problem. Any info/suggestions will be helpful.
The error is as follows:
ORACLE caused an invalid page fault in
module KERNEL32.DLL at 0167:bff7b9a6.
Registers:
EAX=00000000 CS=0167 EIP=bff7b9a6 EFLGS=00000246
EBX=02952450 SS=016f ESP=0712fbe0 EBP=0295231c
ECX=0712fbfc DS=016f ESI=067f1030 FS=51d7
EDX=02952310 ES=016f EDI=028562ec GS=0000
Bytes at CS:EIP:
ff 76 04 e8 13 89 ff ff 5e c2 04 00 56 8b 74 24
Stack dump:
02952450 067e388c 067f1030 02952450
76003481 0712fbfc 02952310 02952450
7600265e 00000000 02952310 029522b0
029522bc 76003283 029522b0 7600e420
null

i have the same problem (ORACLE caused an invalid page fault in module KERNEL32.DLL ...) in the end of the oracle8i, win98 install. But also for the developper 6.0 when it's installed in the same 8i oracle_home. I've installed in another oracle_home directory and it seems to work.

Similar Messages

HT6413 I keep getting a installation pkg error when installing icloud for windows 7 on my pc.

I keep getting an windows installation error when installing icloud for windows 7. I have tried installing manually without success.

There is a very long way which is removing anything related to Apple including stuff in the registry.
The short way is as follows. It worked for me.
I have seen that in the forum EXCEPT the registry trick which is missing and does the different.
1. Remove the Apple account from Outlook. In my case a me.com account.
2. Disconnect the connection to ICloud in the control panel of version 3.1.
REBOOT and open Outlook to see that all traces of the email account and of ICloud are gone.
3. Uninstall ICloud 3.1. I used REVO Uninstaller in Safe way mode. It removed some stuff in the registry from what I see; but not sure.
4. Delete as much stuff as possible in the C \Program Files (x86) \Common Files \ Apple
and C\Program Files\Common Files \Apple. My computer is 64 bits.
5. Go to the registry by typing regedit.exe or simply type regedit in the Start Box. Search for ICloud. I deleted TWO entries related to ICloud. Otherwise, you will still see the ICloud control panel despite the fact that you removed 3.1.
6. then I was able to install ICloud 4 immediately. Upon restarting it asked me my email and password and added itseft to Outlook like it was before. Be aware that you address book in Outlook could be deleted, so do an export before.

Driver Version Not Found" Error when installing drivers for X-fi Xtreme audio

I recently bought the game Bioshock off steam and have been unable to play as it crashes as soon as I try to launch it. After doing some digging around I found out it was a sound problem. When I was looking at the drivers for my sound card (Sound Blaster X-Fi Xtreme Audio) I noticed that the driver called:?XFXA_PCDRV_LB__04_0079.exe has a fix for Bioshock. However when I install the driver I get the error "Driver version not found". I am positi've it is the correct driver for my sound card. I am on Windows 7 64bit.

Hey!
I have Vista Ultimate x64 and I ran windows update couple days ago. There was a new update for my xtreme audio pci-e. I installed it and now my driver version in creative software update is .3.2. Before i updated i ran creative's own software update. It didn't find any new drivers. I was WTF. I think that new driver fixed my volume problem. I had problem's when there was a deep bass in a song. The sound card lowered volume levels then somehow. Now that happens no more. In vista's device control it shows the driver version as 6.0.0.203. Driver date is 7 october 2008.

Encountering errors when installing OO40 for oracle 10g version 10.1.0.5.2

Hello:
I am installing an oracle application (argus) on a machine running Windows 2008 Server and Oracle 11g Database..
The Argus installation manual says that Oracle Objects should be installed.
I found the version listed in the Sibject line but when I tried to run the installer, it comes up with an error dialog box that says "Abnormal program termination. An internal error has occured. Please provide the following files to Oracle Support" and then says "Unlknown" three times.
Did anybody encounter this scenario? How did you resolve it?
Venki

Hi:
While I am still waiting for someone to help to solve the issue, I did some research. I used the Oracel Universal Installer and checked into the Products.XML associated with the installation for Oracle Objects I downloaded from Oracle site. The Installer came up with the following error message:
Some components in the Stage Area have stage versions less than 10.2.0.0.0. Please ensure that all the components have their stage versions greater than or equal to 10.2.0.0
I opened Products.XML and all components are 10.1.x.
Any idea where I can get compatible versions?
Venki

Error when installing update for desktop software

when i try to update my software i am getting the error message saying
Blackberry Destiop Software requires that Microsoft Visual C++ 2008 SP1 RAedistributable package is installed . Can some one please help me

I'm having the exact same problem - I even downloaded the update from Microsoft 3 times and I still get the error message. The last few updates of BBdesktop have been problematic for me - I had to skip the last one because the sync kept on crashing. My loyalty to the brand is beginning to falter....

Error when installing QuickTime for iTunes 7

"The installlation of QuickTime did not complete successfully. iTunes requires QuickTime."
That's exactly how it appears, typo and all, when I attempt to install iTunes 7.
Here are a few errors from a log file:
MessageType: INSTALLMESSAGE_INFO
Message: 1: ISMsiServerStartup Failure, Failed to create InstallDriver, Error = 0x80029c4a
Returning: 1L
MessageType: INSTALLMESSAGE_INFO
Message: 1: MsiServerStartup failed. Abort installation.
Returning: 1L
MessageType: INSTALLMESSAGE_INFO
Message: Action ended 16:41:27: ISMsiServerStartup. Return value 1603.
Returning: 1L
MessageType: INSTALLMESSAGE_INFO
Message: Action ended 16:41:27: ISStartup. Return value 3.
Returning: 1L
I can post the rest if it would help. I've googled for this and can't turn up anything. Any help would be appreciated.
I've also checked the InstallDriver parameters in C:\WINDOWS\system32\dcomcnfg.exe are set to the launching user.

Ok...Here's what will solve your problem for sure. I know because it worked for me.
Step 1.) If you have itunes/quicktime on your computer, uninstall quicktime using the installer that came with it. You don't need to uninstall itunes.
Step 2.) Reboot your computer and terminate/disable all antivirus/spyware shields/protection.
Step 3.) Click start, run, type regedit, and navigate to the key that was mentioned when you first tried to install/upgrade itunes and quicktime. Delete the folder the key (value) resides in, which is something like: QuickTimePlayerLib.QuickTimePlayerApp (whatever is said from the installer).
Step 4.) Close the registry editor, and install the new itunes/quicktime. You might want to download it again to start with a fresh copy.
Note: If you did as I said, it will work and quicktime/windows will not be harmed because of the registry editing.
Hope this solves this problem once and for all. Have fun!

Error when installing ICQ for Mac

Today I attempted to install the official ICQ messenger for Mac (which I downloaded here: http://download.icq.com/download/mac/en ) but the installation of the .air file failed and asked me to contact the software creator for a new installation file.
Recommended system requirements:
Mac OS X v10.4.9 or later (ok)
Flash 10 and above (ok)
Adobe Air 2.5 (ok)
The system.log shows the following error:
========================================================================
Mar 13 12:16:35 Daniels-MacBook-Air.local Adobe AIR Application Installer[1192]: Application Installer begin with version 3.6.0.6090 on Mac OS 10.8.2 x86
Mar 13 12:16:35 Daniels-MacBook-Air.local Adobe AIR Application Installer[1192]: Commandline is: /Users/daniel/Downloads/icq4mac.air
Mar 13 12:16:35 Daniels-MacBook-Air.local Adobe AIR Application Installer[1192]: Installed runtime (3.6.0.6090) located at /Library/Frameworks/Adobe AIR.framework
Mar 13 12:16:35 Daniels-MacBook-Air.local Adobe AIR Application Installer[1192]: Unpackaging file:///Users/daniel/Downloads/icq4mac.air to /var/folders/ck/5qfd1kc92ks3zk03zcgp3q9w0000gn/T/FlashTmp.mwWFwx
Mar 13 12:16:36 Daniels-MacBook-Air.local Adobe AIR Application Installer[1192]: Package signature validation failed
Mar 13 12:16:36 Daniels-MacBook-Air.local Adobe AIR Application Installer[1192]: Got an unexpected fatal error while unpackaging: [ErrorEvent type="error" bubbles=false cancelable=false eventPhase=2 text="invalid package signature" errorID=5022]
========================================================================
So it's quite obvious that the package signature failed. However, I was able to install this messenger on another machine successfully, so I'm wondering why it always fails for this MacBook.

First of all, thanks for your answer. No I've had no previous versions of ICQ installed on this system, it's a brand new MacBook.
It should be the same version since they apparently didn't update it since 2011. It actually still works on the other machine but I can't seem to get it working on this one.
I re-downloaded the installer like 5 times but it always returned the same error message, unfortunately. The package signature validation continues failing all the time.

Error when installing itunes for windows 7 64-bit

I just bought a new laptop with windows 7 on it. I downloaded itunes and when i try to run the setup.exe it says:
"This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify that this is a valid windows installer package"
I tried saving the exe file to my hard drive instead of running it. I tried running as administrator.
I even downloaded older versions of itunes (9.0.2)(9.0.1) and tried to install and it said the same thing.
I downloaded just to see if it was a problem with my computer not giving me access to install things and it installed just fine.
I downloaded the 64-bit version of the software.
I also disabled my anti virus and firewall temporarily.
Just to save my sanity I downloaded the new version of iTunes on my girlfriends laptop who also has a 64 bit version of windows 7 and tried to run the installer. It ran just fine.
This is really frustrating me so any help would be greatly appreciated.

Just to save my sanity I downloaded the new version of iTunes on my girlfriends laptop who also has a 64 bit version of windows 7 and tried to run the installer. It ran just fine.
Do you still have the known-good installer on the girlfriend's laptop?
If so, I'd try copying it to an external hard drive or large-enough thumb drive, or burning it to a CD-R. Carry it back to your PC, copy the iTunes64Setup to your hard drive (don't run the install from the external or CD-R), and then try running an install from that known-good installer.
Does that one go through properly?
(Thinking here that the installers might have been getting damaged during the download to your PC ... if we could bypass that step, we might be able to get the beggar installed.)

Plenty of makes errors when installing 8.1.6

Hello everyone
please help me. I got plenty of target make scripts not found errors when installing Oracle8i 8.1.6 on Redhat 7.0
This is perplexing - I can even get to the stage where you guys got all those linking errors.
Help will be most appreciated! Thanks!

Did you set all the environment variables as instructed in the insatllation manual?

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

Oracle Application Server for SLES Linux error when install

I try install Oracle Application Server Infrastructure (as_linux_x86_portal_wireless_101202) on SLES:
1. I install orarun package.
2. Install patch 3167528 - remove entries from the "/etc/services"
error when install - the OPMN process manager failed to start.
I read opmn/logs: can't load shared library libdb.so.2...
I check /usr/bin/libdb.so and found libdb-4.3.so
I create simbolik link libdb.so.2 to libdb-4.3.so and retry install oracle Application Server Infrastructure, but have this error again.
I try install Oracle Application Server Infrastructure on several linux distribs, but have this error again adn again..
how I can fix this error? help mee pls..

I think that you need to download a patch for that error, this patch is just a library that you need create a link to it.
Follow this Metalink Note 790943.1
Greetings

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Error when installing Oracle8i for Windows98

Similar Messages

Maybe you are looking for