Error when installing SAP gateway in Flash Builder 4.6

I installed Flash Builder 4.6 but I am getting an error installing the SAP add-on. it says org.maven.ide.eclipse missing. I am running this as admin.

Ok, I seemed to have found a solution/workaround for the error.
After importing the Day 2 starter projects, I did not exit and restart Flash Builder. After exiting/restarting Flash Builder, I can now edit the .mxml files without the annoying "Finding occurrences" errors.

Similar Messages

  • Error while installing SAP Gateway

    Hi,
    I am getting the following error while installing SAP Gateway.
    INFO 2009-09-24 06:11:18.815
    Execute step stopInstance of component |NW_Gateway|ind|ind|ind|ind|0|0|NW_GW_Instance|ind|ind|ind|ind|7|0|NW_Instance|ind|ind|ind|ind|0|0
    INFO 2009-09-24 06:11:19.238
    Creating file C:\Program Files\sapinst_instdir\NW04S\STANDALONE\GW\stop_QAS_G00.log.
    ERROR 2009-09-24 06:11:19.238
    FSL-06002  Error 216 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (310), with parameter (E:\usr\sap\QAS\SYS\exe\nuc\NTI386\stopsap.exe ...).
    ERROR 2009-09-24 06:11:19.238
    MUT-03025  Caught ESyException in Modulecall: ESAPinstException: error text undefined.
    ERROR 2009-09-24 06:11:19.253
    FCO-00011  The step stopInstance with step key |NW_Gateway|ind|ind|ind|ind|0|0|NW_GW_Instance|ind|ind|ind|ind|7|0|NW_Instance|ind|ind|ind|ind|0|0|stopInstance was executed with status ERROR ( Last error reported by the step :Caught ESyException in Modulecall: ESAPinstException: error text undefined.).
    Regards,
    Rajiv

    Hi Sunny,
    This installation is being done on windows.
    The logs are
    Preprocess  of component |NW_Gateway|ind|ind|ind|ind|0|0|NW_First_Steps|ind|ind|ind|ind|0|0|W2K_ServicePack_Check|ind|ind|ind|ind|2|0
    INFO 2009-09-24 06:11:18.643
    Copied file 'C:/Program Files/sapinst_instdir/NW04S/STANDALONE/GW/keydb.xml' to 'C:/Program Files/sapinst_instdir/NW04S/STANDALONE/GW/keydb.2.xml'.
    INFO 2009-09-24 06:11:18.784
    Copied file 'C:/Program Files/sapinst_instdir/NW04S/STANDALONE/GW/statistic.xml' to 'C:/Program Files/sapinst_instdir/NW04S/STANDALONE/GW/statistic.5.xml'.
    INFO 2009-09-24 06:11:18.815
    Execute step stopInstance of component |NW_Gateway|ind|ind|ind|ind|0|0|NW_GW_Instance|ind|ind|ind|ind|7|0|NW_Instance|ind|ind|ind|ind|0|0
    INFO 2009-09-24 06:11:19.238
    Creating file C:\Program Files\sapinst_instdir\NW04S\STANDALONE\GW\stop_QAS_G00.log.
    ERROR 2009-09-24 06:11:19.238
    FSL-06002  Error 216 (Unknown, try 'net helpmsg <Nr>') in execution of a 'CreateProcess' function, line (310), with parameter (E:\usr\sap\QAS\SYS\exe\nuc\NTI386\stopsap.exe ...).
    Regards,
    Rajiv

  • Error when install sap license with 'saplicense -install'

    Dear experts,
    Error when install sap license with 'saplicense -install':
    SAPLICENSE (Release 640) ERROR ***
        ERROR:   Can not set DbSl trace function
        DETAILS: DbSlControl(DBSL_CMD_IMP_FUNS_SET) failed with return code 20
        RC-INFO: error loading dynamic db-library - check environment for:
                 dbms_type = <db-type>  (e.g. ora)
                 DIR_LIBRARY = <path to db-dll>  (e.g. /usr/sap/SID/SYS/exe/run)
    Could you gvie me any ieda?

    Another way is to open a command prompt as nspadm and run saplicense -install
    To do this follow the steps below
    Click "Start" -> "Run..." and enter:
    runas /u:nspadm cmd
    Enter nspadm's password. A command prompt appears running as user nspadm. Now change to \usr\sap\nsp\SYS\exe\run and run
    saplicense -install
    Hope this helps.
    Regards,
    Klause

  • Missing file error when installing SAP Front End

    When installing SAP front end, i am receiving following file missing error, please assist:
    I am using Windows XP Professional
    The SAP Front-End Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
    Click Finish to exit the wizard.
    The following program files are missing on the installation source:
    c:\sapexport34567\others\sapgui620\gui\windows\win32\sapgui\filc\odbc\mscreate.dir
    c:\sapexport34567\others\sapgui620\gui\windows\win32\sapgui\xxl\saplotgr.gid
    c:\sapexport34567\others\sapgui620\gui\windows\win32\sapgui\xxl\saplotuk.gid
    The installed applications may not function correctly until all program files are successfully installed. For detailed error descriptions, please open file://C:\SAPEXP1\Others\SAPGUI1\GUI\WINDOWS\WIN32\setup\saplogvw.exe .

    Hi Anand,
    I would not care about those files, because they are unneccessary. mscreate.dir is a 0 byte file which just tells that microsoft has created this directory. The *.gid files are winhelp files that get created when you first use the help function.
    Regards,
    Pascal

  • Error when installing SAP Netweaver Composition Environment 7.1

    Hello,
    I hope this is the right thread to ask this question. We have been trying to get a Java App running in the Enivironment, but we always get an error. When Installing the Composition Environment on a mashine that fulfills the minimum specs, the Message appears: "The Installation of SAP Netweaver CE 7.1 is finished, but some serious erros occured during the insall. Please see the installation log." Unfortunatelly the log does not really reveal what the Problem ist. The Book put out by SAP does not give any hints either. Any ideas of what could be going wrong? Sorry to not have more information.
    Jan

    Hello Jan Ba,
    please look for the log file called sapinst_dev.log, which is the main one for any Installations. It should contain the error you see on the high level GUI screen, please copy and paste its content here.
    Best regards,
    Tomas Black

  • "Finding occurrences" error when editing .mxml file in Flash Builder 4.6 Premium (Trial)

    I am evaluating Flash Builder 4.6.  Windows 7 Ultimate x64
    I am trying to go through the Flex in a week training series but I am getting a lot of the "Finding occurrences" errors when editing the mxml files.
    The error:
    An internal error occurred during: "Finding occurrences".
    java.lang.NullPointerException
    This error occurs almost every time an xml tag is edited.
    I can dismiss the error window that pops up by hitting 'Enter' and can continue editing the .mxml file but the error keeps repeating.
    I was getting this error in the Day 1 set of exercises but after awhile the errors just stopped.
    Now that I have imported the Day 2 starter projects, the error has started again but is occurring on almost every keystroke when editing an xml tag/element!.
    Anyone have any ideas how to correct this issue?

    Ok, I seemed to have found a solution/workaround for the error.
    After importing the Day 2 starter projects, I did not exit and restart Flash Builder. After exiting/restarting Flash Builder, I can now edit the .mxml files without the annoying "Finding occurrences" errors.

  • Error when installing sap solution manager

    Dear all,
    When i am installing SAP solution manager (SAP SOLMAN 7.0 EHP1SR1 WINDOWS_X86_64), I meet the following error:
    An error occurred while processing option SAP Solution Manager 7.0 EhP1 > SAP Systems > MS SQL Server > Central System > Central System( Last error reported by the step: ABAP processes of instance S01/DVEBMGS00 [ABAP: UNKNOWN] did not start after 10:30 minutes. Giving up.). You can now:
    Choose Retry to repeat the current step.
    Choose Log Files to get more information about the error.
    Stop the option and continue with it later.
    Log files are written to C:\Program Files/sapinst_instdir/SOLMAN/SYSTEM/MSS/CENTRAL/AS.
    Do anyone meet the same error before? Please help...
    Thanks.

    I had a similar issue because the size of the pagiing file, after increase the size of paging file to 20Gb, I solved the issue in my system. The instance wasn't up because the size of paging file.

  • Error when installing an ad hoc distribution build - what is this error?

    I've followed all the manual instructions to the letter I believe. But when installing the app and provisioning profile on an iPhone (one of the iPhones in the profile) the following error occurs:
    the application someAppName was not installed on the phone because an unknown error occurred OxE8000001
    Does anybody know what that means and how to fix it? I'm stumped!
    I wanted to test with an ad hoc distribution before trying to place the app in the app store.
    Thanks!
    doug

    Same here. I'm still trying to get the big picture as to what these deployment steps are for.
    I got my ad hocs to work, and now I'm trying to backtrack what I did:
    - Program Portal stuff:
    1. Added my device ID
    2. Created my app ID
    3. Created my adhoc distribution profile with matching app id and device id
    - Downloaded the adhoc mobileprovision files and placed it in ~/Library/MobileDevice/Provisioning Profiles
    - I have my certificates in my login keychain:
    1. Apple Worldwide Developer Relations
    2. (Developer) iPhone Developer: My Name
    3. (Ad hoc distribution) iPhone Distribution: My Name
    - I have a fresh XCode UIView based project:
    1. Created a duplicate of Release config for distribution
    2. Added entitlements.plist with get-task-allow set to false
    3. Set the Code Signing Entitlements build setting to entitlements.plist
    4. Set Code Signing Identity: Any iPhone OS Device = iPhone Distribution: My Name
    5. Set Code Signing Provisioning Profile: Any iPhone OS Device = My Ad Hoc Provisioning Profile Name
    6. Build the project (distribution config with device active sdk)
    7. Give the MyApp.app file and my downloaded adhoc .mobileprovision file to the other person
    - Install
    1. The other person drags the .mobileprovision to her iTunes
    2. The other person drags the MyApp.app file to her iTunes
    3. Syncing the iPhone successfully installs MyApp

  • Error when installing SAP NetWeaver AS ABAP 7.02 SP6 32-bit Trial

    Hello,
    I have tried several times to install "SAP NetWeaver AS ABAP 7.02 SP6 32-bit Trial".
    But i always get an error during install.
    I get this error:
    An error occurred while processing option SAP NetWeaver 7.0 including Enhancement Package 2 > SAP Application Server ABAP > MaxDB > Central System > Central System
    ( Last error reported by the step :Program 'Migration Monitor' exits with error code 2. For details see log file(s) import_monitor.java.log, import_monitor.log.
    My System specs are:
    Windows XP Professional SP3
    2GB RAM
    JRE 1.5.0_22 or JRE 1.4.2 (i have tried both)
    Maybe there is a problem with the correct file size of "Part 2 file" on the [download location|http://www.sdn.sap.com/irj/sdn/index?rid=/webcontent/uuid/f03b3428-91e5-2d10-5fae-9afaad060b0c]
    The file size of "part 2 file" should be:
    "SAP NetWeaver AS ABAP 7.02 SP6 32-bit Trial Version Part 2 (1.838.392.707 bytes)".
    But my file size is always only "1.837.289.009 bytes".
    I have tried to download the file with 3 different browsers on two different computers.
    Please help

    Hi Anders,
    No, there is no space anywhere. this is my log
    os.name = Windows XP
    os.arch = x86
    os.version = 5.1
    cpu.count = 4
    sun.cpu.endian = little
    sun.arch.data.model = 32
    sun.cpu.isalist = pentium_prommx pentium_pro pentiummmx pentium i486 i386 i86
    file.encoding = Cp1252
    file.separator = \
    path.separator = ;
    line.separator = CR/LF
    user.name = mphasis
    user.home = d:\Documents and Settings\nspadm.MPHNYLAP41L24
    user.dir = C:\Program Files\sapinst_instdir\NW702\AS-ABAP\ADA\CENTRAL
    user.language = en
    user.country = US
    java.version = 1.5.0_22
    java.vendor = Sun Microsystems Inc.
    java.vendor.url = http://java.sun.com/
    java.vm.version = 1.5.0_22-b03
    java.vm.vendor = Sun Microsystems Inc.
    java.vm.name = Java HotSpot(TM) Client VM
    java.vm.info = mixed mode
    java.compiler =
    java.class.version = 49.0
    java.home = C:\Program Files\Java\jre1.5.0_22
    java.ext.dirs = C:\Program Files\Java\jre1.5.0_22\lib\ext
    java.class.path = migmon.jar
    java.library.path = C:\Program Files\Java\jre1.5.0_22\bin;.;C:\WINDOWS\system32;C:\WINDOWS;D:\usr\sap\NSP\SYS\exe\uc\NTI386;D:\sapdb\clients\NSP\bin;D:\sapdb\clients\NSP\pgm;D:\sapdb\programs\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Windows Imaging\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files\Common Files\Roxio Shared\OEM\12.0\DLLShared\;C:\Program Files\Roxio\OEM\AudioCore\;C:\WINDOWS\system32\WindowsPowerShell\v1.0;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program Files\Windows Imaging\;C:\Program Files\Common Files\Roxio Shared\DLLShared\;C:\Program Files\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files\Common Files\Roxio Shared\OEM\DLLShared\;C:\Program Files\Common Files\Roxio Shared\OEM\12.0\DLLShared\;C:\Program Files\Roxio\OEM\AudioCore\;C:\WINDOWS\system32\WindowsPowerShell\v1.0
    java.io.tmpdir = D:\usr\sap\NSP\tmp\
    Required system resources are missing or not available:
      Import directory 'C:\SAPNW\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP2' does not have valid structure of subdirectories;
      Import directory 'C:\SAPNW\NWASABAPTRIAL70206\SAP_NetWeaver_702e_Export\DATA_UNITS\EXP3' does not have valid structure of subdirectories.
    I checked the EXP2 and EXP3 directories and there is a DB directory and some LABEL and PRODLABEL files there.
    thanks,

  • FATAL: shared memory region is being held at - Error when installing SAP with sapinst

    Hi guys
    This error is kinda odd since i have installed 3 systems under the same OS/DB Conditions
    Windows 2012 R2 with ASE 15.7.
    14GB Memory
    30GB PageFile
    Firewall Off
    On the previous two systems, when executing a System Copy using an Export File it completed with no problems.
    On this System Installation, during ASE Server Setup, SAPINST fails, checking ASE logs it seems releted to memory, but I cant figure out what is the problem since 14GB would be enough, and it never happened on the previous installations.
    Any idea what could be causing this?
    init logs.
    Finished loading file 'charset.loc'.
    03/13/15 06:23:20 AM End output from 'charset'.
    03/13/15 06:23:20 AM Character set 'utf8' has been successfully installed.
    03/13/15 06:23:20 AM Task succeeded: install a character set(s).
    03/13/15 06:23:20 AM Running task: set the default character set and/or default
                         sort order for the Adaptive Server.
    03/13/15 06:23:20 AM Setting the default character set to utf8
    03/13/15 06:23:20 AM Sort order 'binary' has already been installed.
    03/13/15 06:23:21 AM SQL command: exec sp_configure 'default character set id',
                         190, binary
    03/13/15 06:23:21 AM SQL command: exec sp_configure 'default sortorder id', 25,
                         utf8
    03/13/15 06:23:21 AM Sort order 'binary' has been successfully set to the
                         default.
    03/13/15 06:23:23 AM SQL command: shutdown
    03/13/15 06:23:25 AM Waiting 15 seconds for the operating system to reclaim
                         resources before rebooting.
    03/13/15 06:23:45 AM Calling the shell with
                         '"J:\sybase\AEC\ASE-15_0\bin\sqlsrvr.exe"
                         -d"J:\sybase\AEC\sybsystem\master.dat" -sAEC
                         -e"J:\sybase\AEC\ASE-15_0\install\AEC.log"
                         -i"J:\sybase\AEC\ini" -M"J:\sybase\AEC\ASE-15_0" '.
    03/13/15 06:23:55 AM Calling the shell with '0 = return code.'.
    03/13/15 06:24:11 AM Calling the shell with
                         '"J:\sybase\AEC\ASE-15_0\bin\sqlsrvr.exe"
                         -d"J:\sybase\AEC\sybsystem\master.dat" -sAEC
                         -e"J:\sybase\AEC\ASE-15_0\install\AEC.log"
                         -i"J:\sybase\AEC\ini" -M"J:\sybase\AEC\ASE-15_0" '.
    03/13/15 06:24:11 AM waiting for server 'AEC' to boot...
    03/13/15 06:24:21 AM SERVER ERROR: Failed to boot server 'AEC'.
    03/13/15 06:24:21 AM SERVER ERROR: Couldn't reboot server 'AEC' after changing
                         internal tables.
    03/13/15 06:24:25 AM CONNECTIVITY ERROR: Open Client message: 'ct_connect():
                         network packet layer: internal net library error: Net-Lib
                         protocol driver call to connect two endpoints failed
                         Failed to connect to the server - Error is 10061 No
                         connection could be made because the target machine
                         actively refused it.
    03/13/15 06:24:25 AM CONNECTIVITY ERROR: Initialization of auditinit
                         connectivity module failed.
    03/13/15 06:24:25 AM Task failed: set the default character set and/or default
                         sort order for the Adaptive Server. Terminating
                         configuration.
    03/13/15 06:24:25 AM Configuration failed.
    03/13/15 06:24:25 AM Exiting.
    03/13/15 06:24:25 AM The log file for this session is
                         'J:\sybase\AEC\ASE-15_0\init\logs\log0313.007'.
    03/13/15 06:24:25 AM Log close.
    Install Log
    00:0000:00000:00000:2015/03/13 06:24:13.07 kernel  SySAM: Using licenses from: J:\sybase\AEC\\SYSAM-2_0\licenses\SYBASE.lic;J:\sybase\AEC\\SYSAM-2_0\licenses\SYBASE_ASE_DE.lic
    00:0000:00000:00000:2015/03/13 06:24:13.70 kernel  SySAM: Checked out license for 2 ASE_CORE (2020.1231/permanent/100C 0F04 3F88 1821).
    00:0000:00000:00000:2015/03/13 06:24:13.70 kernel  This product is licensed to: SAP, for use with SAP Business Applications.
    00:0000:00000:00000:2015/03/13 06:24:13.70 kernel  Checked out license ASE_CORE
    00:0000:00000:00000:2015/03/13 06:24:13.70 kernel  Adaptive Server Enterprise (Enterprise Edition)
    00:0000:00000:00000:2015/03/13 06:24:13.71 kernel  Using config area from primary master device.
    00:0000:00000:00000:2015/03/13 06:24:13.71 kernel  Warning: Using default file 'J:\sybase\AEC\AEC.cfg' since a configuration file was not specified. Specify a configuration file name in the RUNSERVER file to avoid this message.
    00:0000:00000:00000:2015/03/13 06:24:13.73 kernel  Allocating a shared memory segment of size 131137536 bytes.
    00:0000:00000:00000:2015/03/13 06:24:13.73 kernel  WARNING: shared memory segment is being held by another application
    00:0000:00000:00000:2015/03/13 06:24:13.75 kernel  FATAL: shared memory region is being held at 131104768 bytes but 131137536 bytes are required
    00:0000:00000:00000:2015/03/13 06:24:13.75 kernel  kbcreate: couldn't create kernel region.
    00:0000:00000:00000:2015/03/13 06:24:13.75 kernel  kistartup: could not create shared memory
    Best
    Martin

    After implementing solution in Note 2011550 - SYB: SAP ASE on Windows fails to start, issue was fixed

  • Error when installing SAP Addons

    Hi all,
    When i am installing a SAP addon i got the following error:
    "Error: -1603 Fatal error during installation. Consult Windows Installer Help (Msi.chm) or MSDN for more information."
    Can somebody how to fix this problem.
    Thanks in advance,
    Chief

    I solved it what you need to do is: To clean the temp directory.
    Via Start - Run - %temp%.
    Greetz,
    Chief

  • Error when installing SAP BI

    Hi,
    iam going to install BI .iam getting this  following error at the time of installing sofrware units.
    ERROR 2008-12-04 10:50:14.86
    FCO-00011  The step enableUsageTypes with step key |NW_Onehost|ind|ind|ind|ind|0|0|SAP_Software_Features_Enablement|ind|ind|ind|ind|5|0|enableUsageTypes was executed with status ERROR ( Last error reported by the step :uncaught exception: nw.sdm.deploymentErrorWithLog:
    SDM deployment failed for at least one of the components to be deployed. SOLUTION: Check C:\Program Files/sapinst_instdir/NW04S/SYSTEM/ORA/CENTRAL/AS/callSdmViaSapinst.log for more information. (in script unknown, line 0: ???)).
    Regards,
    krushna ch Nayak.
    <Removed>
    Edited by: Arun Varadarajan on Dec 4, 2008 11:31 AM
    Edited by: Arun Varadarajan on Dec 4, 2008 11:31 AM

    Hi,
    Try this.....
    Open command prompt Navigate to directory /usr/sap///SDM/program and execute:
    sdm jstartup "mode=integrated"
    and Retry to install the same...
    Let us know your status..
    Regards,
    Gagan Deep Kaushal

  • Sql error when installing sap erp6.0 ides

    HI
       Any  one guide me , how to  increase the tempdb size in my sap system. this is sap ehp5 system and database is mssql2008 64bit.
       i have attached the screen shot for the issue and os is  windows2008 r2 64 bit
    regards
    vreddy

    Hello,
    You can increase the tempdb size with SQL Studio:
    Connect to your DB and navigate to the node Databases > System Databases. Right-click on tempdb, and then click Properties.
    In Database Properties, select the Files page.
    To increase the size of templog, increase the value in the Initial Size (MB) column for the file.
    Click OK.
    or with a SQL statement:
    ALTER DATABASE  tempdb  MODIFY FILE (name = templog, size = 70MB)
    Regards,
    Nicolas

  • Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

    I posted this in the Microsoft Community forums and was redirected here.
    Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
    Hello,
    In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
    I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
    so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
    start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
    I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
    So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
    this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
    the Windows logo and throbber, some error like this appeared:
    Fatal Error Performing Update Operation # of ##: ERROR CODE
    It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
    However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
    your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
    I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
    As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
    Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
    which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
    Thanks in advance to anyone who can help!
    So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
    If anyone here has any more specific ideas, lemme hear 'em.
    Thanks!

    To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
    you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
    this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
    answer.
    I will continue to update this thread as I try new things and get more information.
    Thank you.

  • Installing Groovy-Eclipse in Flash Builder

    Has anyone been successful in installing Groovy-Eclipse in Flash Builder. I am currently using Flash Builder 4.5 and starting to work with Groovy. Any help would be nice.
    Thanks,
    Nate

    Thanks,
    So I unchecked the maven integration but when trying to run the install I got:
    Cannot complete the install because one or more required items could not be found.
      Software being installed: Groovy-Eclipse Feature 2.1.3.xx-20110505-1900-e37 (org.codehaus.groovy.eclipse.feature.feature.group 2.1.3.xx-20110505-1900-e37)
      Missing requirement: JDT Core patch for Groovy-Eclipse plugin 2.1.3.xx-20110505-1900-e37 (org.codehaus.groovy.jdt.patch.feature.group 2.1.3.xx-20110505-1900-e37) requires 'org.eclipse.jdt.feature.group [3.7.0,3.7.1)' but it could not be found
      Cannot satisfy dependency:
        From: Groovy-Eclipse Feature 2.1.3.xx-20110505-1900-e37 (org.codehaus.groovy.eclipse.feature.feature.group 2.1.3.xx-20110505-1900-e37)
        To: org.codehaus.groovy.jdt.patch.feature.group [2.1.3.xx-20110505-1900-e37]
    This is really the error I been seeing. I guess the other one just came from the Maven part.

Maybe you are looking for