Error when installing Toshiba Tools and Power Saver

Hi,
I have a Satellite A100-771 and installed Windows XP Professional with SP2.
Afterwards I installed all drivers. After that I wanted to install the Toshiba Utilities and have got an error message : "Toshiba common Module not found! This setup will terminate."
Furthermore I tried to install the Power Saver Tool, which is more important as the uilities I think. And here I have got the error message: "A fatal error has occurred. This program will be terminated. Code:0x7E"
I am not sure what I can do else. I also installed the hotfixes for Windows which are on the ToolCD from Toshiba. But the problem is still there.
The difference between both errors is that the installation of the utilities setup stop before finishing installation. On the Power Safer installation, it finished on 100% and terminate the setup or the program after the installation.
May somebody can help me.
Eathen

There is a specific order that the Toshiba utilities and drivers have to be loaded in. This list is on the Toshiba download page, and the common modules is one the first utilities that has to be loaded for the others to work

Similar Messages

Mount error when installing xcode 3 and iOS 4

Hi,
I ran into mount error when installing xcode 3.2.6 and iOS 4.3 downloaded from https://developer.apple.com/devcenter/download.action?path=/Developer_Tools/xcod e_3.2.6_and_ios_sdk_4.3__final/xcode_3.2.6_and_ios_sdk_4.3.dmg.
I work on Mac mini with Mac OS X 10.6.
Could anyone help? Thanks!
Regards,
Emily

Hi Ken,
Thanks for your advice! I would try to clean up for more free space. I just downloaded one dmg from another website linking to apple. I could successfully install that one, but very often the content in gdb window is empty. Even if the gdb works for some time initially, after loading some specific project, the gdb doesn't provide info any longer :-( Any idea?
It might be the best season in Shenzhen now. It is sunny, but not hot, with temperature from 25 degree centigrade to 30.
Regards,
Emily

11gR2 Error when installing a database and schema

I have install 11gR2 on my laptop with window 7 4gb ram 500gb hard drive
I getting this error
ORA-01503: CREATE Controlfile / Failed
and
ORA-01158: Database already mounted
i need to set up a database a 3 different schema
because i am doing a install of Hyperion Share service, Essbase and Planning
Please advise

Pl do not post duplicate threads - 11gR2 Error when installing a database essbase on install of 11.1.2.1
Your original thread was moved to the Essbase forums since this is Essbase related
Srini

Satellite P100-488 - Installing Toshiba tools and utilities on Windows 7

Hello everybody,
I have purchased a pre-order of Windows 7 Professional for my laptop and would like to upgrade it from Windows Vista Home Premium installed on it at the moment.
However, I just have one question :
- Do you think I will be able to upgrade from Windows Vista Home to Windows 7 Professional without a full install ?
- Else, if I have to perform a full install, then is it possible to install the Toshiba tools and utilities from the CD (I have not found anything to do this) ?
Many thanks in advance.
Fred

Hi Fred
As I can see you have two questions. ;)
At first I must say that I don't believe anybody here will be able to offer exact answers but here is my opinion:
Q1 for OS installation I prefer full installation but I think you will be able to make Win7 upgrade. Problem is how the Toshiba tools and utilities will work after this upgrade. As far as I know in the past Toshiba has suggested removing some tools and utilities before upgrade installation starts.
So maybe you should think about full OS installation. I think it is better solution for you.
Q2 I the whole story I see one problem what if Toshiba will not offer Win7 support for your notebook model? Then you will have problem and just try to use Vista stuff in hope it will works with Win7 too. Anyway, in this forum you can find many postings where people confirm that most of Vista stuff runs well with Win7.
Good luck Fred.

Error when installing Ecc5.0 and IDES Ecc5.0

Hi all,
I tried to install Ecc5.0 and IDES ECC5.0 on same server( windows 2003,and Oracle9i),but when installing ECC5.0 after successfully install IDES Ecc5.0,used following two cases, there are errors.
Case one:
install IDES and ECC on different SAP system:
step one: instlling a Non-Unicode SAP Ecc 5.0 SR1 ABAP system --> installs central instance on both systems, T13 and T14, from DVD 51031149
Step two: instlling a Non-Unicode SAP Ecc 5.0 SR1 ABAP system --> installs database instance on T13, select IDES export DVDs(DVD 51031332) during the installation process, installation successfully.
Step 3: instlling a Non-Unicode SAP Ecc 5.0 SR1 ABAP system --> installs database instance on T14, select ERP 2004 export DVDs(DVD 51031867) during the installation process, there is error when installation went to Oracle database Load with something like name alreay in the database.
Case two:install IDES and ECC on same SAP system:
Base on the above error, I tried to install ECC database instance on T13 again with diffrent Schema ID from IEDS database instance.
still there is an error like "connect with sql failed, error # 257".
Could any one help me?
I ever successfully installed ECC5.0 without IDES

Pls let us know that could you able to install ECC5 IDES, if yes pls give EXPORT material no.
Thanks
Vijay

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple s

I have an error when installing apps on my mac from the apple store. It says "return to the purchase page and try again"... I think it is something to do with the installation process itself. I have tried to clear apple store cache, restarted apple store from debug menu, double checked my apple id account and etc..but doesn't work anyway.

I'm having the same problem and went as far as to delete and reinstall the AppStore and still no dice.

Getting an "installer failed to initialize" error when installing CS5 from CD

Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5

Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Getting error when i am creating and tesing data server in ODI

Hi,
Getting error when i am creating and tesing data server in oracle (Physical Architecture) in topology manager ODI.
Please anybody help me on this.
Java.net.ConnectException: Connection refused: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:529)
     at java.net.Socket.connect(Socket.java:478)
     at java.net.Socket.<init>(Socket.java:375)
     at java.net.Socket.<init>(Socket.java:189)
     at com.sunopsis.graphical.l.pm.a(pm.java)
     at com.sunopsis.graphical.l.pm.s(pm.java)
     at com.sunopsis.graphical.l.pm.g(pm.java)
     at com.sunopsis.graphical.l.pm.a(pm.java)
     at com.sunopsis.graphical.l.pm.a(pm.java)
     at com.sunopsis.graphical.l.iz.actionPerformed(iz.java)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.Component.processMouseEvent(Component.java:6263)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
     at java.awt.Dialog$1.run(Dialog.java:1046)
     at java.awt.Dialog$3.run(Dialog.java:1098)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.awt.Dialog.show(Dialog.java:1096)
     at java.awt.Component.show(Component.java:1563)
     at java.awt.Component.setVisible(Component.java:1515)
     at java.awt.Window.setVisible(Window.java:842)
     at java.awt.Dialog.setVisible(Dialog.java:986)
     at com.sunopsis.graphical.l.pm.q(pm.java)
     at com.sunopsis.graphical.l.pm.<init>(pm.java)
     at com.sunopsis.graphical.frame.b.jh.bx(jh.java)
     at com.sunopsis.graphical.frame.bo.w(bo.java)
     at com.sunopsis.graphical.frame.bo.d(bo.java)
     at com.sunopsis.graphical.frame.w.actionPerformed(w.java)
     at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
     at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
     at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
     at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
     at java.awt.Component.processMouseEvent(Component.java:6263)
     at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
     at java.awt.Component.processEvent(Component.java:6028)
     at java.awt.Container.processEvent(Container.java:2041)
     at java.awt.Component.dispatchEventImpl(Component.java:4630)
     at java.awt.Container.dispatchEventImpl(Container.java:2099)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
     at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
     at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
     at java.awt.Container.dispatchEventImpl(Container.java:2085)
     at java.awt.Window.dispatchEventImpl(Window.java:2478)
     at java.awt.Component.dispatchEvent(Component.java:4460)
     at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
     at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
     at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
     at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
Thanks,
Krish

So are you getting the same error when you try from the installed agent or the tool (Local agent)? Is your agent on the same machine or different machine. If so, does that particular machine can connect to the database?
Also, are you using the same JDBC driver that you are using in SQLDeveloper? Same URL?
Typically, connection refused error appears with wrong instance or wrong port. Try telnet-ing the in the database server and db port. See what happens there!!! The java stack that you provided here is not an SQL exception, it is related to socket creation. It has less to do with JDBC and more to do with physical resources like machine, port and permission.

Jrew error when install 8i client in chinese win98

I got the following error when installing the 817 client to chinese win98.
JREW caused an invalid page fault in
module JAVAI.DLL at 0167:6ee3803a.
Registers:
EAX=00000060 CS=0167 EIP=6ee3803a EFLGS=00000206
EBX=c0000005 SS=016f ESP=0063ebf0 EBP=0063f184
ECX=c15089f0 DS=016f ESI=00000009 FS=3587
EDX=816aac84 ES=016f EDI=00000000 GS=0000
Bytes at CS:EIP:
8b 4f 3c 33 c0 03 cf 2b f7 66 8b 41 14 33 d2 66
Stack dump:
0063f184 0063f2a0 0063f1c8 c0000005 00000000 00000000 00000000 00400000 00010000 00000000 00020000 6ee37ac9 00000009 0063edb8 00000104 0063ec58
How to resolve it ?

1. Yes, it's a distributed installation. I choose ABAP stack installation and then choose Java installation as add in.
2. Yes, J2EE_ADMIN & J2EE_GUEST can log on to system with password james123.
3. In usercheck log file, it contains a part of information of sapinst.log, shows below.
java.lang.ClassNotFoundException: com.sap.security.tools.UserCheck
        at com.sap.engine.offline.FileClassLoader.findClass(FileClassLoader.java:691)
        at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:600)
        at com.sap.engine.offline.FileClassLoader.loadClass(FileClassLoader.java:578)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:79)

"Could not complete scan" error when using Windows Fax and Scan

"Could not complete scan" error when using Windows Fax and Scan with a HP OfficeJet Pro 8600 Plus All-In-One network printer.
Printing is fine.
When using the HP Scan application, get the error "Scanner communication cannot be established".
When scanning from the printer itself it fails with the same message. In addition the printer panel displays the error:
"The scan could not be completed due to one or more of the following issues:
Connection to the computer is lost
The scanner is in use
OCR application is not installed"
My PC is a HP Compaq Pro 6300 SFF 64bit, with ethernet cable to the router and ethernet cable to the printer
Originally ran Windows 8.0; recently upgraded to Windows 8.1.
Older separate Netgear router and modem was replaced with a newer Netgear Router/Modem, but both experienced the same problem.
There was no problem with the original Windows 8.0 configuration and only after upgrading to 8.1 did the problem emerge.
On my home netowrk I have an HP ProBook 6550b running Windows 7 sp1 that uses wireless to get to the Router, and it has no problem with scanning.
I have followed the recommendations of a number of articles relating to this issue (including: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02915410&product=4323659#N94), but there has been no change in behaviour.
The printer has a static IP address;
Power settings have been adjusted to Never for Turn off Hard Disk; Sleep and Hybrid Sleep.
Scanning has been tested with all firewalls and antivirus turned off and in Selective Startup.
The printer has been plugged directly into the power socket.
With all these settings the Windows 8.1 cannot scan while the Windows 7 laptop with wireless to the router has no problems.
Appreciate any insights into this problem.
I can only surmise that the problem is a compatibility problem between the 8600 Printer and Windows 8.1.
Any ideas?
regards,
Motorbike

You can determine if there is compatiblity between the printer and PC by checking the Windows 8.1 hardware compatibility list. I have done that and it is shown to be fully compatible. If the driver you installed before was only the basic driver,it would explain the lack of scan and copy functionality.
Download and install the Windows 8.1 full feature driver and software on the HP Compaq Pro 6300 SFF 64bit PC .
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-108858-4&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Photoshop CS4 "Program Error" when using Text tool

Hello. I was having problems with Photoshop displaying a "Program Error" every so often, so I deleted the preference file and all seemed good. But after deleting the preference file for my Photoshop CS4 and re-launching Photoshop, the text tool causes Photoshop to display a Program Error when using the tool. It never did this before. Should I reinstall Photoshop? I am using a Powermac G5 running 10.5.8. I have already tried repairing the disk permissions.
Thanks

Thats kinda what I thought too, but the problem started happening randomly. It started when we were trying to use photomerge with large photos. The program just started giving the program errors. I still think it may be a font problem, but without going through my 2000+ fonts and disabling them one by one, how can I resolve this issue?
Thanks

Error when install Infrastructure 10g 10.1.2 in Windows2000 server

My environment:
RDBMS Version: 10.1.0.3.1
Operating System and Version: Windows2000 SP4
Product (i.e., OAS, IAS, etc): 10g AS Release 2
Product Version: 10.1.2
JDK Version: 1.4
I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
Subscriber Naming attribute: dc
Default Subscriber Name: server01
*** Resetting user DN and GUID information ...***
Done....
PL/SQL procedure successfully completed.
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
NLS_LANG character set = WE8MSWIN1252
NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
ERROR : Exception while configing SSO DAD :
oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
Please advice.
Thanks
Trung

I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Error when installing Toshiba Tools and Power Saver

Similar Messages

Maybe you are looking for