Error when installing UPK developer server 12.1

Hello,
I am getting error as "There was an unexpected error running SQL scripts. Setup will now terminate." when installing UPK developer server 12.1. Any ideas why this would come?
thanks and regards,
SD

I did another round of testing and got the same error again. This time I have collected the install log which is as below-
Installation Starts
Microsoft .NET Framework 4.5: already installed
Windows Installer 3.1: already installed
Microsoft Visual C++ 2012 Redistributable: already installed
Microsoft Visual C++ 2012 Redistributable (64-bit): already installed
Microsoft Visual Studio 2010 Tools for Office Redistributable: already installed
Windows Process Activation Service: already enabled
World Wide Web Publishing Service: already enabled
Call:[ValidateURL]
Call:[GetWinAcctInfo]
Call:[CheckFolderPermission]
Call:[CheckLocalGroupsForUser]
Call:[CheckSpecificFolderPermission]
Call:[CheckNestedGroupsForUser]
Call:[CheckNestedGroupsForUser]
Call:[CheckNestedGroupsForUser]
Call:[CheckFolderPermission]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckSpecificFolderPermission]
Call:[CheckNestedGroupsForUser]
Call:[CheckNestedGroupsForUser]
Call:[CheckFolderPermission]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckLocalGroupsForUser]
Call:[CheckSpecificFolderPermission]
Call:[CheckNestedGroupsForUser]
Call:[CheckNestedGroupsForUser]
Call:[CheckFolderPermission]
Call:[CheckSpecificFolderPermission]
Call:[CheckNestedGroupsForUser]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll: enabled successfully
Installation Aborted
it says aborted because I only have the option to click on OK and installer exits.
User Productivity Kit
There was an unexpected error running SQL scripts. Setup will now terminate.
OK 
any thoughts?
many thanks,
SD

Similar Messages

  • Error installing UPK developer server version 11.1.0.0

    hi all,
    am trying to install UPK developer server version 11.1.0.0 on Windows server 2008 R2 SP1 with Oracle DB as backend. After I complete the installtaion wizard and click on install, I get the below error-
    Library error
    Encountered a problem while populating the library.  Error code: 1.  Would you like to open the log file?
    Click 'Yes' to open the log file or click 'No' to continue the installation.
    Yes   No  
    I get this message during the stage where it says "Please wait while setup populates the library. This operation can take over an hour in some environments."
    Has anyone seen this? please advice.
    thanks and regards,
    SD

    I did another round of testing and got the same error again. This time I have collected the install log which is as below-
    Installation Starts
    Microsoft .NET Framework 4.5: already installed
    Windows Installer 3.1: already installed
    Microsoft Visual C++ 2012 Redistributable: already installed
    Microsoft Visual C++ 2012 Redistributable (64-bit): already installed
    Microsoft Visual Studio 2010 Tools for Office Redistributable: already installed
    Windows Process Activation Service: already enabled
    World Wide Web Publishing Service: already enabled
    Call:[ValidateURL]
    Call:[GetWinAcctInfo]
    Call:[CheckFolderPermission]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckSpecificFolderPermission]
    Call:[CheckNestedGroupsForUser]
    Call:[CheckNestedGroupsForUser]
    Call:[CheckNestedGroupsForUser]
    Call:[CheckFolderPermission]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckSpecificFolderPermission]
    Call:[CheckNestedGroupsForUser]
    Call:[CheckNestedGroupsForUser]
    Call:[CheckFolderPermission]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckLocalGroupsForUser]
    Call:[CheckSpecificFolderPermission]
    Call:[CheckNestedGroupsForUser]
    Call:[CheckNestedGroupsForUser]
    Call:[CheckFolderPermission]
    Call:[CheckSpecificFolderPermission]
    Call:[CheckNestedGroupsForUser]
    C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_isapi.dll: enabled successfully
    Installation Aborted
    it says aborted because I only have the option to click on OK and installer exits.
    User Productivity Kit
    There was an unexpected error running SQL scripts. Setup will now terminate.
    OK 
    any thoughts?
    many thanks,
    SD

  • Oracle - Microsoft  Odbc Error while installing UPK on Server 2008 64 bit..

    upk VERSION: 3.5.1
    os: windows 2008 server 64 bit
    oracle: 11g.1 for 64 bit
    i have created a user with sysdba and other privileges and i am able to login into database as well.
    but when i try to run the UPK ( server) installer and select the ORacle database i am getting following error after entering user name and password.
    Error:
    ====
    An error occur while trying to connect to the server"
    MSDAORA: there was an error logging into oracle
    Error: oracle client and networking components were not found.
    {Microsoft ODBC for Oracle} there was an error logging into oracle .
    error: Microsoft ODBC Driver manager Driver SQLALLOCHandle on SQL_Handle_Env_failed(0).
    Any help would be highly appreciate.
    thanks.

    Hi,
    Have you found a solution for this problem yet?
    I am facing the same issue.
    I would be very gratefull for a solution to this problem.
    Edited by: [email protected] on 11.06.2010 03:43

  • Error when installing NetWeaver Developer Studio 7

    Hi,
    I am having problems installing the NetWeaver Developer Studio 7.0.0. which comes bundled with the SAP NetWeaver 7.0 - Trial Version on Linux. To initiate installation, i double-clicked on the IDE70Setup file located in the client/IDE folder. I filled in the options presented by the wizard and installation proceeded. However halfway it terminated abruptly, and displayed an error message as shown below:
    Missing file: 'C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.java.ide_7.0.0\plugin_customization.ini'.
    Has anybody who encountered this problem before help me out? Any help would be greatly appreciated. Thanks!

    Hi
    Thanks a lot for a quick reply I have tried to install the updates from these two sites.
    --https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710/site.xml     
    --https://nwds.sap.com/swdc/downloads/updates/netweaver/nwds/ce/710/policy.xml     
    This is an error I m getting.
    "No features found on the selected site(s) choose the diferent site or site category"
    One question do i have to install the Sap Netweaver CE7.1_SR3... to run this Developer Studio coz I just downlaoded  the Dev Studio 7.1 and I am running it on my machine. but I am using JDK 6 not 5 will that be a problem.
    Yonela

  • Error when install Infrastructure 10g 10.1.2 in Windows2000 server

    My environment:
    RDBMS Version: 10.1.0.3.1
    Operating System and Version: Windows2000 SP4
    Product (i.e., OAS, IAS, etc): 10g AS Release 2
    Product Version: 10.1.2
    JDK Version: 1.4
    I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
    Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
    Subscriber Naming attribute: dc
    Default Subscriber Name: server01
    *** Resetting user DN and GUID information ...***
    Done....
    PL/SQL procedure successfully completed.
    No errors.
    Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
    With the Partitioning, Real Application Clusters, OLAP and Data Mining options
    NLS_LANG character set = WE8MSWIN1252
    NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
    ERROR : Exception while configing SSO DAD :
    oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
    at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
    at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
    Please advice.
    Thanks
    Trung

    I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
    When you get the error, start OID using the command line then try running the config assistant again.
    Hope this helps
    Alex

  • Oracle Application Server for SLES Linux error when install

    I try install Oracle Application Server Infrastructure (as_linux_x86_portal_wireless_101202) on SLES:
    1. I install orarun package.
    2. Install patch 3167528 - remove entries from the "/etc/services"
    error when install - the OPMN process manager failed to start.
    I read opmn/logs: can't load shared library libdb.so.2...
    I check /usr/bin/libdb.so and found libdb-4.3.so
    I create simbolik link libdb.so.2 to libdb-4.3.so and retry install oracle Application Server Infrastructure, but have this error again.
    I try install Oracle Application Server Infrastructure on several linux distribs, but have this error again adn again..
    how I can fix this error? help mee pls..

    I think that you need to download a patch for that error, this patch is just a library that you need create a link to it.
    Follow this Metalink Note      790943.1
    Greetings

  • "User Not Recognized" when installing UPK with Windows Authentication

    Hi all,
    When installing UPK Server with Windows Authentification mode, everything work fine until when the installer starts populating the Library. I get an error message saying "User is not recognized. Please enter a valid administrator user name and password. Click OK to enter another name or click Cancel to stop the upgrade process."
    I tried using "my current Window account" and different Windows account when asking to give a default Developer admin login during the install but I still get the same message.
    I might be forgeting something this time since I have installed UPK tones of times and never got this error.
    Many thanks.

    Hello,
    Thank you!! After much testing and environment and OS changes, I found out that I totally forgot my Windows administration from over 7 years ago on a security feature that Microsoft put into their OS's. If you are using a friendly DNS name to publish to your clients (instead of them typing in the server name as the URL) and you want to utilize Windows authentication, a registry entry will need to be entered in order for the OS to be allowed to pass the windows auth through to that URL as well.
    Example registry entry:
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0]
    "BackConnectionHostNames"=hex(7):
    KB Article:
    http://support.microsoft.com/kb/896861
    In Registry Editor, locate and then click the following registry key:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa\MSV1_0
    Right-click MSV1_0, point to New, and then click Multi-String Value.
    Type BackConnectionHostNames, and then press ENTER.
    Right-click BackConnectionHostNames, and then click Modify.
    In the Value data box, type the host name or the host names for the sites that are on the local computer, and then click OK.

  • Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

    I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
    Output generated from configuration assistant "Oracle Net Configuration Assistant":
    Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
    UnsatisfiedLinkError exception loading native library: njni10
    Configuration assistant "Oracle Net Configuration Assistant" failed
    The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
    I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

    Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

  • I have a problem when installing the Developer Suite

    Hello,
    I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.
    Please help me with this :(

    Hi user;
    I'm new to Oracle and I'm having a problem when installing the Developer Suite 10g. I have the Oracle Database 11g installed, but when I try to istall the developer, it gives me this error: "Oracle Developer Suite 10g cannot be installed into an existing Oracle9i 9.2.0.1.0 oe higher Oracle Home", Although I have installed the same thing twice before and it was working.What is your OS? If you are linux-unix level you are making installation wiht same user of Oracle Db11g? Did you try to create new Oracle_home and set it before start installation?
    Regard
    Helios

  • Error when installing SDK on BW platform

    We have successfully installed SDK to our DS client, but get an error when installing the extensions on the BW platform (SP12):
    I understand that I need to reboot the portal server, but the error message indicate that the issue will not be resolved. Any suggestions?

    Hi,
    it could be that the depending extension was unpacked while installing the extension pack.
    please go to folder C:\user\..\Analysis-config\plugins and check if the extension jar-file is available. If there is only a folder with the extension name you have to delete this folder,
    uninstall the extension pack in your Design Studio (client side),
    go to Eclipse and check the "Unpack after installing" checkbox in your project Features,
    if it is checked please unckeck it,
    export your extension pack to zip-file,
    install your extenion pack again on client side,
    now the jar-file should be available.
    You sholud deploy your extension on Server without any errors.
    kind regards
    Patrick

  • Error when installing app

    I keep getting an error when installing some apps - unknown error (0xE8000013)
    Anyone know what this is or why this is happening???
    any help apreciated

    leefilmer,
    Have you tried the steps in article http://support.apple.com/kb/TS1702 ? Reporting the problem to the particular application developer may be helpful, since it seems to be occurring with some apps.
    Oddly, the article I found documenting the error doesn't seem related to the issue you're experiencing: http://support.apple.com/kb/TS1266. Do you have a SIM PIN on your iPhone by chance?
    Other than that, have you tried restoring your iPhone and setting it up as a new phone? More information can be found here: http://support.apple.com/kb/HT1414 .
    Hope this helps,
    Raleigh

  • Mount error when installing xcode 3 and iOS 4

    Hi,
    I ran into mount error when installing xcode 3.2.6 and iOS 4.3 downloaded from https://developer.apple.com/devcenter/download.action?path=/Developer_Tools/xcod e_3.2.6_and_ios_sdk_4.3__final/xcode_3.2.6_and_ios_sdk_4.3.dmg.
    I work on Mac mini with Mac OS X 10.6.
    Could anyone help? Thanks!
    Regards,
    Emily

    Hi Ken,
    Thanks for your advice! I would try to clean up for more free space. I just downloaded one dmg from another website linking to apple. I could successfully install that one, but very often the content in gdb window is empty. Even if the gdb works for some time initially, after loading some specific project, the gdb doesn't provide info any longer :-( Any idea?
    It might be the best season in Shenzhen now. It is sunny, but not hot, with temperature from 25 degree centigrade to 30.
    Regards,
    Emily

  • Gives  ORA-12560: TNS: protocol adapter error when installing oracle 10g

    I tried to install oracle 10g r2 in server 2008. but it gives ORA-12560: TNS: protocol adapter error when installing. how I can fix this issue??? please help me ASAP. because its urgent.
    thanks in advance.
    chamara

    Welcome to the forums !
    Pl indicate which version of 10g you are installing and on which version of Win 2008. Neither 10gR1 nor 10gR2 are certified to be installed on Win 2008 R1, AFAIK.
    For 10gR2, only 10.2.0.5 is certified for Win 2008 R2 - see MOS Doc 1173433.1 (How to Install Oracle 10.2.0.5 on MS Windows 7 / Windows 2008R2)
    Also see MOS Doc 740926.1 (Where can I find the Database / Client software to download for Microsoft Vista, or Windows 2008R1?).
    Both 10gR1 and 10gR2 are now in extended support - is there a reason you are not using 11gR2 ?
    HTH
    Srini

  • Access Denied Error when Installing Suitcase

    I am encountering an Access Denied Error when installing Suitcase X1 on a 600 MHz G3 ibook running 10.4.3 with all updates and it gets to 2 items remaining to be installed and I get access denied error and then another screen pops up and says "You do not have enough access privileges for this installation". I am logged in as an administrator, I tried creating a new Administrator account, I have repaired permissions, I have tried downloading a new file, all with no luck and now I am stuck. Any ideas?
    G3 Pismo, G4 Desktop   Mac OS X (10.4.3)  

    Hi,
    Firstly, please let us know if it is a workgroup or domain environment.
    Also, please let us know more details about the configurations of the server and clients.
    Meanwhile, you can check the settings by referring to the following:
    Allow someone to connect to your computer using Remote Desktop Connection
    http://windows.microsoft.com/en-HK/windows7/allow-someone-to-connect-to-your-computer-using-remote-desktop-connection
    Remote Desktop Connection: frequently asked questions
    http://windows.microsoft.com/en-hk/windows/remote-desktop-connection-faq#1TC=windows-8
    If issue persists, please provide us the unedited error message or screenshot for further research.
    Thanks.
    Jeremy Wu
    TechNet Community Support

  • Error number 207 error type SPECIFIC_CODE IMPORT ABAP phase error when install database instance

    IMPORT ABAP phase error when install database instance
    Error number 207 error type SPECIFIC_CODE.
    In phase   "Import ABAP" the installation halts with error. Can anyone please tell me what error should I search for and (possibly) what is the solution? 
    Thanks in advance
    synxcaccmg.cpp: 133: PSyUser CSyAccountMgtImpl::getUser(iastring sNameOrSID) const
    syxxccache.cpp: 267: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false)
    syxxccache.cpp: 276: CSyAccountCache::getUserImpl(name="IboSap-PC\nspadm", sid="", create=false, ISyProgressObserver* )
    synxcuser.cpp: 119: CSyUserImpl::CSyUserImpl(const CUserData&, bool)
    Account user="IboSap-PC\nspadm" does not exist.
    Failed action:  with parameters
    Error number 207 error type SPECIFIC_CODE

    It is not easy, really , it has taken many hours and at the End I got the problems,.
    so I have decided to pay 20 $ every month, and I can get an access IDES to SAP, ERP, ABAP.
    without any problem.  In ABAP, I have only Sflight ,SBOOK etc. but MARA, and others tables, dont exist, .
    I know, some students have not enough money, so what can we do? every one get problem with installaion and others after installaion, with server, 3 days work, and NSP becomes RED. Yellow, etc.
    anyway. thank you for all.
    Best Regards.

Maybe you are looking for