Error when installing webauth certificate virtual wireless LAN controller

Hi there
I am having issues installing web auth certificate for our virtual wirelesss LAN controller.
I am issuing a certificate from our own PKI in following format
device cert for WLC > Intermediate > our root cert.
I have followed the discussion here
https://supportforums.cisco.com/discussion/10890871/generating-csr-wlc-5508
and the document here
http://www.cisco.com/c/en/us/support/docs/wireless/4400-series-wireless-lan-controllers/109597-csr-chained-certificates-wlc-00.html#support
However I am still getting the following errors
*sshpmLscTask: Jun 30 17:18:26.443: sshpmLscTask: LSC Task received a message 4
*TransferTask: Jun 30 17:18:28.785: Memory overcommit policy changed from 0 to 1
*TransferTask: Jun 30 17:18:28.785: RESULT_STRING: FTP Webauth cert transfer starting.
*TransferTask: Jun 30 17:18:28.785: RESULT_CODE:1
FTP Webauth cert transfer starting.
*TransferTask: Jun 30 17:18:33.154: ftp operation returns 0
*TransferTask: Jun 30 17:18:33.154: RESULT_STRING: FTP receive complete... Installing Certificate.
FTP receive complete... Installing Certificate.
*TransferTask: Jun 30 17:18:33.154: RESULT_CODE:13
*TransferTask: Jun 30 17:18:37.159: Adding cert (8217 bytes) with certificate key password.
*TransferTask: Jun 30 17:18:37.169: sshpmCheckWebauthCert: Verification return code: 1
*TransferTask: Jun 30 17:18:37.169: Verification result text: ok
*TransferTask: Jun 30 17:18:37.171: sshpmAddWebauthCert: Extracting private key from webauth cert and using bundled pkcs12 password.
*TransferTask: Jun 30 17:18:37.361: sshpmDecodePrivateKey: calling ssh_skb_decode()...
*TransferTask: Jun 30 17:18:37.493: sshpmDecodePrivateKey: SshPrivateKeyPtr after skb_decode: 0x2aaaacb51628
*TransferTask: Jun 30 17:18:37.493: sshpmAddWebauthCert: got private key; extracting certificate...
*TransferTask: Jun 30 17:18:37.494: sshpmAddWebauthCert: extracted binary cert; doing x509 decode
*TransferTask: Jun 30 17:18:37.494: sshpmAddWebauthCert: doing x509 decode for 1594 byte certificate...
*TransferTask: Jun 30 17:18:37.494: sshpmAddWebauthCert: failed to validate certificate...
*TransferTask: Jun 30 17:18:37.494: RESULT_STRING: Error installing certificate.
*TransferTask: Jun 30 17:18:37.495: RESULT_CODE:12
*TransferTask: Jun 30 17:18:37.495: Memory overcommit policy restored from 1 to 0
Error installing certificate.
Any help is much appreciated

Similar issue:
https://supportforums.cisco.com/discussion/11043836/wism-42112-and-web-auth-certificate

Similar Messages

Wildcard Certificate and Wireless Lan Controller

Hello,
I'm working with wlc 5508 version 7.2.111.3 and I'm looking to use a wildcard certificate, I've just checked on the forum that there was a bug-id and it seems it's been closed with a workaround of not using wildcard certs, is it resolved now?
If yes, could you indicate to me how can I proceed to install it quickly?
Regards

Hello,
The bug was about bad behavior when the wildcard certificate is used. The status of the bug now is "Terminated". That means it was found that the root cause for this bug is not really a bug (bad description, normal behavior...etc).
So, I think you can go with the wildcard certificat you have. The bug was opened on 5.2 version which is very old comparing to 7.2.
Let us know how it goes.
Regards,
Amjad
Rating useful replies is more useful than saying "Thank you"

Best Practice for DHCP when Anchoring to a Guest Wireless LAN Controller

Hi all,
I'm interested in the communities opinion in relation to DHCP provisioning when using auto-anchor/guest tunneling.
As far as I can tell, one cannot use the internal DHCP on the anchor controller when using auto-anchor due to incompatibility between the auto-anchor feature and DHCP Option 82.
The scenario is as follows:
Guest controller is the anchor which provides Internet access to guests.
There is a foreign controller which is configured to anchor to the guest controller.
The internal DHCP server is configured on the guest anchor controller, therefore DHCP proxy must be enabled for DHCP to work.
DHCP proxy enables Option 82.
The guidlines for guest tunneling state that DHCP Option 82 isn't supported. (Ref: Deploying and Troubleshooting Cisco Wireless LAN Controllers - Ch14)
So, the internal DHCP server requires DHCP proxy to be enabled; this in turn enables Option 82, which stops DHCP leases being made to clients connected to the foreign controller.
Given that a guest WLC would normally be placed in a DMZ, the internal DHCP server may often be the only DHCP solution available.
I look forward to hearing your opinions.
Thanks
Rhodri Jenkins

There are a couple of options here if you need to get proxy disabled
1) pinhole with an ACL that allows dhcp to pass your internal servers
2) run dhcp on a switch, router, or firewall in the dmz
3) if you are using a cab,e modem or dsl for the guest users, you can let that do the dhcp
In general I've seen most of these in play, but I like option 2 myself
Sent from Cisco Technical Support iPad App

Data invalid error when installing C6388 printer on ethernet lan

Hello Sir
Hello Sir
I am trying to install HP Photosmart C6388 all in one, in my office on the local area network with no gateway but manually configured IP. While installing the software for lan the software detects the printer with the IP but after completing 53% of the installation there comes an error message saying "cannot install the hardware" "image" "data invalid". I have always disabled my antivirus firewall also but anyhow the problem is still there, Even I have tried to install on 3-4 PC with Windows XP SP-2 the same OS I use the error comes. I have also downloaded the update driver software from your website. Even installing the printer with a gateway enabled network the error comes & says retry or cancel..plz. help....

OK, as long as DHCP is active.
However, after reading this again, this may be a Windows problem. I noticed that you are at SP2 with XP. You really should be at SP3. Do WIndows Updates over and over until there are no more.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Virtual Wireless LAN Controller and 1602E: No SSID

Hello, I am trying to troubleshoot a customer's issue remotely.
They have vWLC 7.4, and a 1602E AP, running the 7.4 LWAPP image, successfully joined.
Whatever is tried, the SSID configuration is not pushed to the AP. Other configuration changes get reflected to the AP such as enabling/disabling ssh.
The goal is for multiple SSIDs connected to various VLANs to be setup, but I have simplified things for now.
So there is an AP group containing this one AP, and a single WPA2-PSK WLAN. The WLAN is bound to the management interface.
The SSID configuration does not get pushed out to the AP.
Any ideas what I should do to troubleshoot this? I can't see any obvious issues in the error logs.
Thanks...

Keep in ming that the vWLC only supports FlexConnect mode AP's not local mode. Is the mode of the AP in local or FlexConnect?
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

Virtual Wireless Lan Controller moved, licence now missing.

Our Cisco WLC version 7.4.100.0 was been moved to new ESXi servers (New hardware) as a result of this I guess the UUID has changed and voided the installed licence.
I've tried to reinstall the original licences but this fail's because of a UDI mismatch.
If I try to do a rehost the first step fail's with
Local file /tmp/license.upd not found!
Can anyone point me in the right direction to recover and reinstall our licences.

Thanks for your replies, the issue is that the guy who set this up also setup his own login Cisco account (rather than use our ScSITServices shared account) where the WLAN licences are located. He has since left and I'm trying without success at the moment to get Cisco support to change the password to allow me access to retrieve the licence.

SSL certificate error when installing

Hi,
We are getting error when installing the SSL certificate on our web dispatcher. Please see screenshot attached.
Kindly assist us on this.
Thank you!
Regards,
AJ

You have to specify the additional certificates with the "-r" parameter.
E g
sapgenpse import_own_cert -c <cert_from_eg_verisign> -p <PSE-file> -r intermediate-one.cer -r intermediate-two.cer
You can specify "-r" up to 10 times.

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

How to replace the certificate of Cisco 2106 wireless LAN controller for CAPWAP ?

I have interested in CAPWAP feature and I download the open capwap project to make Access Controller (AC) and Wireless Terminal Point (WTP). I had built the AC which used PC and WTP which used Atheros AP. The CAPWAP feature work well when I enabled the CAPWAP that used my own AC and WTP. When I got the Cisco 2106 wireless LAN controller (Cisco WLC), I configured the Cisco WLC to instead my own AC but I got the authorize fail in Cisco WLC side. It seem the Cisco WLC could not recognize the CAPWAP message which sent form my own WTP. I think this issue just need to synchronize the certificate between Cisco WLC and WTP.So I need to replace the Cisco WLC's certificate manually. Does anyone know how to replace the certificate manually with Cisco WLC ?
Best Regards,
Alan

Unfortunately this Support Community is for Cisco Small Business & Small Business Pro product offerings. The WLC2106 is a traditional Cisco product. You can find this type of support on the Cisco NetPro Forum for all traditional Cisco products.
Best Regards,
Glenn

Error when install Infrastructure 10g 10.1.2 in Windows2000 server

My environment:
RDBMS Version: 10.1.0.3.1
Operating System and Version: Windows2000 SP4
Product (i.e., OAS, IAS, etc): 10g AS Release 2
Product Version: 10.1.2
JDK Version: 1.4
I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
Subscriber Naming attribute: dc
Default Subscriber Name: server01
*** Resetting user DN and GUID information ...***
Done....
PL/SQL procedure successfully completed.
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
NLS_LANG character set = WE8MSWIN1252
NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
ERROR : Exception while configing SSO DAD :
oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
Please advice.
Thanks
Trung

I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Getting an "installer failed to initialize" error when installing CS5 from CD

Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5

Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Error when installing webauth certificate virtual wireless LAN controller

Similar Messages

Maybe you are looking for