Error when joining a leopard server to an active directory
Hi all,
I'd like to add my mac os x server to an active directory. If I fill the "Active Directory Domain" with ip address, "Unable to add the domain, there was no response from the ip,please check that the address you entered is correct", if I fill with domain name, "Unable to add domain, An unexpected error of type -14987 (eUndefinedError) occurred.
What's going on there???
Hi all,
I'd like to add my mac os x server to an active directory. If I fill the "Active Directory Domain" with ip address, "Unable to add the domain, there was no response from the ip,please check that the address you entered is correct", if I fill with domain name, "Unable to add domain, An unexpected error of type -14987 (eUndefinedError) occurred.
What's going on there???
Similar Messages
-
Cannot Bind Leopard Server to Windows Active Directory
Trying to Bind new Leopard Server but keep getting an Unknown error. it there an issue with the new Server OS?
This is the error
12/10/07 6:36:37 PM com.apple.launchd[1] (0x0-0x2c02c.com.apple.ServerAdmin4479) Exited abnormally: Segmentation fault
12/10/07 6:37:08 PM Directory Utility236 Step 1 of 6: Searching for Forest/Domain information
12/10/07 6:37:08 PM Directory Utility236 Binding failed with error -14120
12/10/07 6:37:29 PM DirectoryService4626 * +NSCFArray shouldAttemptCheck: unrecognized selector sent to class 0xa0101740
12/10/07 6:37:30 PM com.apple.launchd[1] (com.apple.DirectoryServices4626) Exited abnormally: Bus errorOkay, I have now managed to setup up the server. I did this by creating a Open Directory Master and then binding that to our Active Directory. I have setup Active Directory and LDAP binding on the client Macs.
I then added a user from AD into Workgroup Manager and applied a few preferences. They worked brilliantly. However, the computer Workgroup Manager preferences are not working at all! Is there a different way to add computers to Workgroup Manager (I added them by using the + sign and dragging them in from AD) and is there a way to automatically add a computer once it's joined to the domain, like it goes in to AD? -
I get one or the other error when i install SQL server 2012 SP1 in my Lab server
I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htmSorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected] -
WLST - error when i start managed server using nmstart() command.
i am receiving an error when start the managed server using nmstart(). Please advise.
Do I have add any parameter to nodemanager.properties file?
Thankyou
pasted below is the error message i am receiving when i start managed server.
Starting server hssclient ...This Exception occured at Thu Mar 19 10:30:02 EDT 2
009.
java.lang.IllegalArgumentException: Invalid host name: Null or empty
at weblogic.nodemanager.client.NMClient.checkNullOrEmpty(NMClient.java:7
2)
at weblogic.nodemanager.client.NMClient.setHost(NMClient.java:79)
at weblogic.nodemanager.mbean.NodeManagerRuntime.getNMClient(NodeManager
Runtime.java:527)
at weblogic.nodemanager.mbean.NodeManagerRuntime.getNMClient(NodeManager
Runtime.java:565)
at weblogic.nodemanager.mbean.NodeManagerRuntime.start(NodeManagerRuntim
e.java:188)
at weblogic.server.ServerLifeCycleRuntime.startServer(ServerLifeCycleRun
time.java:439)
at weblogic.server.ServerLifeCycleRuntime.start(ServerLifeCycleRuntime.j
ava:124)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.
java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAcces
sorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at weblogic.management.jmx.modelmbean.WLSModelMBean.invoke(WLSModelMBean
.java:428)
at com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImp
l.java:213)
at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultM
BeanServerInterceptor.java:815)
at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784
at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBea
nServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:248)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.
run(WLSMBeanServerInterceptorBase.java:443)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.inv
oke(WLSMBeanServerInterceptorBase.java:441)
at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterce
ptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:63)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.
run(WLSMBeanServerInterceptorBase.java:443)
at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.inv
oke(WLSMBeanServerInterceptorBase.java:441)
at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(
SecurityInterceptor.java:426)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
ptor$10$1.run(AuthenticatedSubjectInterceptor.java:582)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
ptor$10.run(AuthenticatedSubjectInterceptor.java:580)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.management.mbeanservers.internal.AuthenticatedSubjectInterce
ptor.invoke(AuthenticatedSubjectInterceptor.java:573)
at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanSer
ver.java:310)
at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnecti
onImpl.java:1410)
at javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectio
nImpl.java:81)
at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run
(RMIConnectionImpl.java:1247)
at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(R
MIConnectionImpl.java:1350)
at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImp
l.java:784)
at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown S
ource)
at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:553)
at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:443)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Authenticate
dSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:
147)
at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.jav
a:439)
at weblogic.rmi.internal.BasicServerRef.access$300(BasicServerRef.java:6
1)
at weblogic.rmi.internal.BasicServerRef$BasicExecuteRequest.run(BasicSer
verRef.java:983)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)Hi I am getting below exception, is nmStart only start AdminServer ????
There are 1 nested errors:
weblogic.management.ManagementException: Booting as admin server, but servername, MS1, does not match the admin server name, AdminServer
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:67)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:803)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:493)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<Feb 10, 2010 1:45:17 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Feb 10, 2010 1:45:17 PM UTC> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Feb 10, 2010 1:45:17 PM UTC> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
<Feb 10, 2010 1:45:17 PM> <FINEST> <NodeManager> <Waiting for the process to die: 8275>
<Feb 10, 2010 1:45:17 PM> <INFO> <NodeManager> <Server failed during startup so will not be restarted>
<Feb 10, 2010 1:45:17 PM> <FINEST> <NodeManager> <runMonitor returned, setting finished=true and notifying waiters>
~ -
When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?
Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles. -
-13005 Error when connecting to 2003 Server
I've got a 2003 Server setup with Active Directory and I've enabled SFM (Services for Macintosh), and created a few mac shares.
I created a new account and left the "User must change password at next logon" option enabled, something I don't usually do.
I then went to my 10.4.7 client machine and tried to connect via AFP to the 2003 Server. It presented me with the following error:
Connection Failed:
-13005
I went back and reset the password for the user and did not enable the "user must change password at next logon" option and I was able to login with no issues at all.
I ran some tests using Mac OS X 10.4.0 thru 10.4.7.
From 10.4.0 thru to 10.4.5 I did not see the aforementioned issue, I was prompted by the OS that I needed to change my password, and I was then able to do so.
From 10.4.6 thru 10.4.7, I see the issue. So what's the difference?
The major difference I've found is that the User Authentication Method being used by default in 10.4.0 - 10.4.5 is "Clear Text", whereas with 10.4.6 - 10.4.7, the OS is deciding to use "Microsoft UAM 3.0".
If I change SFM from "Apple Clear Text and Microsoft" to "Apple Clear Text" then I don't see the problem under 10.4.6 and 10.4.7. This is logical as the only UAM the OS can use at this point is Clear Text.
I've also tried using Group Logic's ExtremeZ-IP product instead of SFM and I do not see the issue, this is because EZIP supports the DHX UAM, and the OS will use that instead of it's MS UAM (note that the UAM is Apple's pre-installed version, and NOT the version you can download and install from Microsoft).
I've also tried changing the password for a user account that did not have "require password change at next logon" set and it does not work if the UAM being used by the OS is "Microsoft UAM 3.0", in this siutation I see a "Password change failed -50" error dialog.
So it would appear the issue is with Apple's "Microsoft UAM 3.0".
Has anyone else encountered this issue, if so, did you find a workaround that did not involve using ExtremeZ-IP? or setting the authentication options in SFM to "Apple Clear Text"Very possibly this is due to differences in AFP protocol versions.
Windows Server has not updated its AFP protocol since version 2.2. Mac OS X uses version 3.1 for Panther and 3.2 for Tiger. Possibly incremental changes are occuring between minor OS updates as well. Just a thought.
Hope this helps!
bill
1 GHz Powerbook G4 Mac OS X (10.4.7) -
Can't connect to Small Business Server 2003 via Active Directory
I have done lots of searching, both in these forums and the wider internet, and cannot find a solution to my specific problem.
I am trying to connect my G5 (10.3.9) to a Windows network. We have a Microsoft Small Business Server 2003 with Active Directory. The PCs have no problem using this, and I can connect to shares setup on the server via AFP.
But I am having problems when I try to configure the AD plug-in in Directory Access on the Mac. When I click 'Bind', I enter the Server's Administrator username & password and when I click 'OK', it gets to Step 3 of 5 "Verifying Credentials". It ticks away at this step for about 30 seconds, then comes up with error message saying "Invalid user name and password combination."
I have tried other users with admin privileges, but they don't work either. I know the usernames and passwords aren't invalid, because I created them. I have tried fiddling around with other settings in the AD setup, but nothing gets any further.
Without any other 3rd party software (that's my final option), is there something I need to check/change, either on the Mac or the server, to make this Mac to authenticate via AD? Please help!Hi Andbrowny, thanks for your response.
Your advice didn't really help my Active Directory problem (AD doesn't require SMB does it?), but it gave me some progress on my SMB problem. I can connect via AFP, but previously when I tried to connect via SMB, it kept coming up with the error "Could not connect to the server because the name or password is not correct".
Now, after changing the policies on the server, I get an error -43 message saying "The operation could not be completed because one or more required items cannot be found."
So now I have two problems! SMB is not finding something it needs, and Active Directory is not "verifying credentials".
Actually, I have three problems: When I am connected via AFP, filenames over 31 characters long are truncated on the server, and I can't copy long filenames onto the server without renaming them. I have read that SMB would fix this to a degree (256 characters for the complete file path), but is there anything (a protocol or software) that allows long filenames to be read/written with ease?
Side note: The server is not 100% configured, the bloke installing it still has some work to do, but Active Directory works for all the XP machines, and I can connect to each XP workstation with SMB. -
X-Serve not finding active directory
My X-Serve has begun to behave somewhat peculiarly.
I recently had SNow Leopard installed, and it had been working fine. I was deploying using deploy studio, it was all working fine. Then one day suddenly it just seems not to be able to find the active directory.
The AD is the PC network, I also can't connect to the internet. (And I've checked the proxies)
Also Server Admin has started throwing up errors saying it can't find the X-Serve... I'm a little confused as to why it can't find itself. Also the workstations now can't find the deploy studio server.
I can see the X-Serve remotely and operate it.
Any clues?
I've rebooted, I've fixed preferences, I'd update, but I can't get on the internet.Just speaking to the loss of AD, If you are running Deep Freeze you may need to run a command that sets passinterval to 0.
http://www.mikespike.org/2008/08/12/osx-leopard-deep-freeze-and-active-directory -oh-my -
I have a user that all of a sudden was not able to open 70% of her files located on a file server, Windows Server 2003 running Active Directory, from her laptop. The same user can access all the same files from a different machine, logging on with the same
credentials. Just looking for a point in the right direction and a possible theory as what could cause this problem, an why all of a sudden. I did go back through the logs but nothing sticks out. For the most part the logs on the server and the laptop are
pretty clean.
Both machines are Latitude E5420s running Windows 7 Enterprise Service Pack 1. Both machines are 64bit and connect to the network via hard-wire, not wireless.
Thanks in advanced.
GrajekI would recommend proceeding that way:
Check that your DCs are in a healthy state and AD replication is fine: It might be that the user is member of security groups and the membership is not getting replicated properly which can cause this random behavior. You can use
dcdiag and repadmin for checks and you can refer to my recommendations here: http://social.technet.microsoft.com/wiki/contents/articles/18513.active-directory-replication-issues-basic-troubleshooting-steps-single-ad-domain-in-a-single-ad-forest.aspx
Make sure that the file server is reachable from the user client computer. Start with
ping and nslookup. Also, you need to make sure that the traffic between the client and the server is not blocked or filtered. You might want to temporary disable security software for testing
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Windows Server 2008 R2 - Active Directory Replication over DynDNS
Hello,
I have one server that Windows Server 2008 R2 - Active Directory / DNS
Now some users shifted to new office with the server
Some users still in the original place that now don't have ADDS/DNS
i want to install one replication server in the original place to retrieve AD/DNS form new office via DynDNS
is that possible of not?
Best regards,Badr, I don't think you want AD replication occurring over the internet - even if that was possible the server would need access to all the SRV records, a records, And all the ports required for communication - See here for an exhaustive list
http://social.technet.microsoft.com/wiki/contents/articles/584.active-directory-replication-over-firewalls.aspx - I don't think I have to tell you how bad opening all these ports to the internet would be.
You may want to look at Setting up a vpn or DirectAccess from the original site to the new site. This will give you more security and generally won't cost to much.
http://technet.microsoft.com/en-us/network/dd420463.aspx
Another thing that may work for you would be if you setup remote desktop services in the new location and had the original location remote into via a gateway server -
http://blogs.technet.com/b/windowsserver/archive/2012/05/09/windows-server-2012-remote-desktop-services-rds.aspx as a starting point. With RDS your users would be able to access the new location from anywhere, although there would be upfront costs associated,
licensing and server being part of them - I don't recommend turning your domain controller into an RDS server.These are just some ideas to help you with your issue -
I have an error when join pc's to domain windows server 2012 r2
Hello everyone
I have a problem to join computers to the domain.
I'm doing the procedure is as follows.
1.'ll properties pc
2. I click Change to join the domain.
3. I request the domain administrator credentials
4. I get the window that has joined the domain correctly and then click accept gives me the following error:}
This error message me with all computers that attempt to join the domain.
I have reviewed forums, I have already set the WINS part and for the network adapter. Not if it's a problem with the server version domain is Windows Server 2012 R2.
I appreciate your help.
regards
Miguel SolanoHello everyone
I have a problem to join computers to the domain.
Well I can not understand Spanish but I guess it is related to RPC. :D
In that case, you need to make sure your DNS entries are correct in clients NIC. Similar threads here:
"RPC Server Unavailable" while attempting to Join domain
Windows
Server Troubleshooting: "The RPC server is unavailable"
Mahdi Tehrani |
|
www.mahditehrani.ir
Please click on Propose As Answer or to mark this post as
and helpful for other people.
This posting is provided AS-IS with no warranties, and confers no rights.
How to query members of 'Local Administrators' group in all computers? -
0x80070569 Error When Creating Second Virtual server in Hyper-v 2012
I get this error when I try to create a second VM from Hyper-v Manager on windows 8 / server 2012 / server 2008 R2.
Hyper-v is running on a new install of server 2012 core.
I was able to create the first VM (server 2012 with a GUI) and is running fine.
I have tried adding the local administrator account to the logon as a batch job and doing a gpupdate /force with not luck.
Both the server 2012 core and the server 2012 VM are joined to the same domain. I am logged into server 2012 and server 2008 R2 as the domain administrator.
Any ideas would help!Hi,
Error Message: The user has not been granted the requested logon type at this computer, this problem typically occurs when the user does not have the permissions to log on locally on the computer.
By default, members of the Users group have the ability to log on locally, but an administrator can deny the right to specific user or group accounts. An explicitly denied right always overrides an allowed right.
This can be caused by either of the following:
Neither the user account nor any of the groups it belongs to has been granted the Allow log on locally user right.
The user account or one or more of the groups it is a member of has been listed in the Deny log on locally user right.
Ensure that the user, or a group the user belongs to has the right to log on locally. Ensure that the user, and all groups that the user belongs to, are not denied the right to log on locally.
Also, have you tied to restart to restart the Hyper-V host server? Restart it and check the result.
You may also try to create VM using PowerShell command:
Sample Scripts for Managing Virtual Machines
http://technet.microsoft.com/en-us/library/bb963748.aspx
For more information please refer to following MS articles:
Error Message: The user has not been granted the requested logon type at this computer
http://technet.microsoft.com/en-us/library/cc732593(v=WS.10).aspx
Windows 8 Hyper-V Virtual Machine Management Service
http://social.technet.microsoft.com/Forums/lv/winserverhyperv/thread/4b3e7582-dc20-4dcb-8e71-fef9fecce19c
Lawrence
TechNet Community Support -
When starting Netscape Calendar Server, the following error message appears:
<BR><P>
Module: , Label: 355, Service error: #0x13209
<P>
The three ACIs listed below need to be present in the Directory Server in order
for Calendar server to work properly. Check the properties on the Base DN to
verify that the following ACIs exist. If they are not present, you will need
to add them, and the Base DN will need to be modified for your enviroment.
<P>
<OL>
<LI>ACI for allowing users to modify their own entries.<BR>
<P>
(targetattr = "*")(version 3.0; acl "Allow self entry modification";
allow (write)userdn = "ldap:///self";)<BR>
<P>
<LI>ACI for allowing anyone permissions to Read, Search, and Compare.<BR>
<P>
(target="ldap:///o=basedn.com") (targetattr != "userPassword") (version
3.0; acl "Anonymous access";
allow (read, search, compare) userdn = "ldap:///anyone";)<BR>
<P>
<LI>ACI for allowing Calendar Server admins Write access to the Base DN
(this is necessary in order for admins to add users and resources to the node).
<BR><P>
(target="ldap:///o=basedn.com") (targetattr = "*") (version 3.0; acl
"Calendar Administrators Group";<BR>
allow(all) groupdn = "ldap:///cn=Calendar Server Admins,ou=Netscape
Servers,o=basedn.com";)<BR>
</OL>Hi Trinidad,
Thanks for your help!!!
1.
I didn't install EventSender and DIProxy yet, I tried first to upload and deploy the zip files, but I couldn't open the Itegration Application Explorer.
2.
The jvm.dll file is in in the folder pointed by the logs: C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap\jre\bin\server
and it is also in C:\Program Files (x86)\SAP\SAP Business One Integration\jdk1.5.0_xx_sap_64\jre\bin\server
I tried running the file java5w.exe, but I got an error message:
Access is denied
Unable to open the service tomcat5
Thne I managed to open it by "rua as administrator".
the Java Virtual Machine path is points to the java 1.5 version folder.
Is it possible that the reason that the service can't start is related to administrator rigts??
In the properties in the Integration Service (services.msc):
It is set to be run with the local system account.
all other properties looks fine.
in the properties of the tomcat5.exe (and tomcat5w.exe , I tried both)
In the Compatibility tab I tried setting the flag "Run this program in compatibility mode for" to Vista, windows 7, and server 2008
I didn't have the option of Windows XP.
I have also set the Privilege level of: "Run this program as administrator" to true.
But still the service won't start.
What can be the problem?
What else can I check?
Thanks a lot,
Chana -
404 error when publishing to FTP server.
I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site." I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site."
A 404 errors means the file is not on the server.
Checking the connection is just testing the FTP connection.
I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?
Do I rename my iWeb file, domain, to index_html?
No, you don't. The domain file is where iWeb stores its assets. It stays on your computer. It has no meaning outside it. iWeb publishes the index.html file and all the other files.
Read this : The concept of iWeb Sites
So if your pages do not load, check for their presence on the server. -
Error when creating a linked server to IBM iSeries AS/400
I am migrating databases from SQL Standard 2005 (32 bit) to SQL Standard
2012 (64 bit) and getting errors when I create the needed Linked Servers to our IBM as/400. I scripted the as400 linked server from the 2005 server and created it on the 2012 server:
EXEC master.dbo.sp_addlinkedserver @server = N'AS400', @srvproduct=N'DB2 UDB for iSeries', @provider=N'MSDASQL', @datasrc=N'AS400'
EXEC master.dbo.sp_addlinkedsrvlogin @rmtsrvname=N'AS400',@useself=N'False',@locallogin=NULL,@rmtuser=N'USER_NAME',@rmtpassword='PSSWD'
(plus various sp_serveroptions)
I then verified that the MSDASQL Provider "Allow Inprocess" was checked and the Linked Server is listed as using the provider but when I try to view the objects under the "AS400" Linked Server I get an error saying: Cannot initialize the
data source object of OLE DB provider "MSDASQL" for linked server "AS400". (Microsoft SQL Server, Error: 7303)
I was told to download and install OLEDB provider for DB2. I downloaded DB2OLEDBV4 but when I try to install it I try to install it I get a OK Box saying: "Microsoft OLE DB Provider for DB2 requires the Microsoft SQL Server 2008 or later
version. Ensure that this version is fullfilled before installing Microsoft OLE DB Provider for DB2." when I click OK, I get "Setup was interrupted before Microsoft OLE DB Provider for DB2 could be completely installed" and the install
exists. I am installing on SQL 2012!
Can anyone please advise...Hi,
Based on your description, we know that you got an error when you installed the OLEDB provider for DB2. Microsoft OLE DB Provider for DB2 V4.0 is needed If you use SQL Server 2008 R2 or SQL Server 2012 to connect to IBM DB2 databases.When you install the
OLEDB provider for DB2 V4.0, we need to make sure that the system meets the following requirements:
• Windows Server 2008 R2 SP1 or Windows 7 SP1 or Windows Server 2008 SP2.
• Microsoft SQL Server 2012 (Enterprise, Developer or Evaluation Edition) or Microsoft SQL Server 2008 R2 (Datacenter, Enterprise, Developer or Evaluation Edition) is installed.
• Microsoft .NET Framework 4.0.
As your post,it seems that you have installed SQL Server 2012 Standard Edition,this edition is not supported by Microsoft OLEDB Provider for DB2 V4.0. I recommend you to upgrade the standard edition to enterprise edition and reinstall the OLEDB Provider.You
can try this method and if you have any questions,please feel free to revert.
For more detailed information, you can review the following link.http://msdn.microsoft.com/en-us/library/hh873008(v=sql.110).aspx
Thanks
Lydia Zhang
Maybe you are looking for
-
How to call a url i-view with parameters
Hello, I want to make a portal navigation in a absolute way. This call should open a url-iview. In this iview the main url string is placed. Further more, a url-parameter ("test") is placed with a standard value. Now, i want to call this iview (see t
-
I am unable to download Elements 8. I get the message that "This file is not available for download." I purchased Elements 8 this morning as an upgrade from Elements 7. Anyone else have this problem?
-
After I replied to the text, after which I went to finish my email and it was gone. I checked all applicable folders (Draft, Trash, Hub, etc) and nowhere to be found (the usual green draft/msg in progress icon was not visible anywhere).I even logge
-
Lotus Traveler meeting notification time is off on iOS 6
I had been leaving my time zone adjustment to manual to prevent messing up with Lotus calendar until last week. I had enough issues due to the wrong time zone that I finally caved in and let my iPhone automatically adjust the time zone wihle on the
-
HT1476 can the phone be set to battery save mode?
I noticed that if I go to sleep and my battery is at 100% in the morning it is at 90% without it even being in use, is there a setting to put the phone on battery save mode?