Error when launching BEx analyzer from Portals
BI Gurus...
We are working on an initiative to migrate our user interface from SAP GUI to Enterprise Portal.
Bex Analyzer is primary mode of reporting at this time.
After importing the Roles into EP, I am able to execute the web queries successfully, in the BEx Wen analyzer. But, I get an error when I click on any of the excel workbooks. Our expectation was that once we click on the excel workbook name, the BEx analyzer will launch from EP. But it seems like the issue is with launching BEx Analyzer from BI Portal.
Has anyone faced this issue before?
Is it possible to launch BEx Analyzer from EP?
Are their some key portal settings we have missed out on to enable launching BEx analyzer from EP?
Please provide your thoughts/experience.
Thanks,
Ajay.
Hi WernerS,
Thanks for your response.
The RRMXP Transaction works and it launching the BEx Analyzer as expected.
Now, as per our research, I think there are 2 ways of launching BEx analyzer from BI Portals.
1) Call via a URL
You can call BEx Analyzer via the following URL: http(s)://<server:port>/sap/bc/bsp/sap/rsr_bex_launch/bexanalyzerportalwrapper.htm
You can modify the URL to open BEx Analyzer with either a workbook, a query or a query view. You can use the following parameters to do this:
● Parameter to open the workbook: ?WBID=<wb_id>
I have tried calling via URL iView, but instead of launching the BEx Analyzer, it just throws a dialog box to "save" or "open" a file, RRMX.bex. When I try to open this file, it says "Invalid File Format".
I tried opening the file in notepad and I see the following parameters passed.
test
Data=BX2,CONAJP,EN,mikoyan,17,,,250,
9
Any clue about what I am doing wrong?
2) Calling via a Transaction
You can generate BEx Analyzer in Portal Content Studio as an SAP Transaction iView.
The iViews are of type SAP Transaction iView and have the code link com.sap.portal.app integrator.sap.Transaction.
The most important properties are System, Transaction Code (TCODE) and ApplicationParameter.
● The Transaction Code for all workbooks is RRMXP.
● The ApplicationParameter property contains the value WBID=<WORKBOOK_ID>.
I have tried this approach as well. When I open this iView, I see the RRMXP transaction in the Internet explorer, but the workbooks still does not open in the BEx Analyzer (Excel)
Any thoughts on where am I going wrong ?
Thanks,
Ajay.
Similar Messages
-
Error when launching promoted app from RemoteAPP
Hi:
We are receiving this error when launching any application from RemoteAPP, we tried promoting Calculator, Notepad, etc. and received the same error as well.
"Personalization:
This theme can't be applied to the desktop.
Try clicking a different theme"
Help!
Thank you,
StangrideIf you launch the app directly from the session hosts using the same account that your using with remoteapp what are you getting? Try and RDP to the session host when you attempt it. I would also check rsop.msc to see if you have any GPO or scripts that
are manipulating themes. -
Error when starting Bex analyzer
Hi All!
We have a world wide BW-SEM application. In one country they get the following error message when starting Bex analyzer:
<install error> Missing ActiveX component: Business Explorer Global Services
Does anyone have a hint on what to do?
Thanks for your help!
Best Regards
Pontushi
try to check with SAPBEXC.xla
and take a look oss note 585643
may need to manual register .dll with regsvr32
Do an Installation check of the BEx Analyzer as follows:
In the bex analyzer menu, Business explorer -> Installation Check -> Once the excel sheet opens, press the start button to start the check. Check the entries in red to see any missing/old ocx, dlls. -
Encountering error when launching course in LSO portal
Hi Experts,
User is facing issue when launching course through LSO portal. Security roles looks to be good. Error message looks like
Unexpectet Error Occured:
XXXX is NOT authorized for this function
emxNavigator Toolbar: Error: No person business object found with name ==XXX
Please suggest
Regards,
TamizHi Tamiz Amuthan
Please reffer to the following links:
SAP Logon error: Client XXX is not available...
User xxxx has no RFC Authorization for function group RSBOLAP_BICS_CONSUMER
Regards,
Shirin -
TRYING TO LAUNCH BEx ANALYZER FROM R3 SYSTEM, WITHOUT LOGIN AGAIN...
Hi mates,
We are trying to launch BEx Analyzer, with a Program/Function from R3 System, using an RFC.
1.- We create a program in R3 system (4.6c), in that program we try to call BW (SAP BI 7.0, SP18), with:
- CALL FUNCTION 'RSAH_LAUNCH_TRANSACTION_SLAVE'
DESTINATION **RFC TO BW**
EXPORTING
TRANSACTION = 'RRMX'
or
- CALL FUNCTION 'RFC_CALL_TRANSACTION_USING'
DESTINATION **RFC TO BW**
EXPORTING
tcode = 'RRMX'
mode = 'N'
With that, or calling an Z transaction, with an Z program, and calling the next functions in the BW program:
'RSSEM_QUERY_LAUNCH'
'RSAH_LAUNCH_EXCEL'
With o without setting Infoprovider and Query or Workbook in the functions.
The result was the same:
1.- R3 call BW - OK
2.- BW call BEx ANALYZER/EXCEL - OK
3.- Analyzer shows, but the user have to login again in BEx Analyzer to open queries or workbooks, and that step we are trying to hide to the users.
We need that users call BEx ANALYZER from R3 to BW using an R3 program or transaction, without login again into BW or BEx, but it seems like there is a problem with ANALYZER, RRMX (and its functions) and SSO.
RFC works fine, and is "trusted". Remote connection and Test Connection works OK.
If you make a REMOTE ACCCES with the RFC, and call RRMX, the result is the same, you have to login again in BEx Analyzer, to open queries or workbooks...
We think, must be something wrong with the SSO, or the SSO with BWE and BEx Analyzer, i mean something wrong with the standar or versions.
We tryied with:
1.- BIAddon 9 in Excel 2007
2.- BIAddon 6 in Excel 2003.
We really appreciate your help.
Best regards,
Bruno.Hi Ravi,
Have you read this whitepaper?
http://www.oracle.com/technology/products/database/application_express/pdf/Extend_Oracle_Applications_11i.pdf
Cheers,
Mike -
Error when using BeX Analyzer 7.0 with Excel 2007
When i try to execute a query in BeX analyzer 7.0 and my microsoft excel version is 2007, there will always have a fatal error showing. However, when i use the Bex Analyzer 3.5 , i could execute the query.
Anyway to solve this problem?You need to do the following
Identify the SAP GUI version you're using, 6.40 or 7.10, and the patch level.
Identify the BW or BI Add-on and patch level of it.
From there, check to see if the versions you have actually support BI 7.0 and Excel 2007. Reliable Excel 2007 support requires failry current patch levels of both the SAP GUI and the corresponding BW/BW Add-ons..
Do you have access to a PC that has a more recent version of the SAP GUI and BW/ BI Add-on? If so, try using that PC and see if you still have the problem. -
When launching a .rdp file that has been download from an rdwebaccess session, the following error is generated "NtlmWebAuthException: 2". I have tested this on the Mac Microsoft Remote Desktop client version 8.0.8 (Build 25010).
The following is the use case:
Download the .RDP file for a published app "notepad.exe", on rdwebaccess (2012R2), accessed through the gateway (2012R2) VIA the connection broker (2012R2) on a RDSH server (2012R2). NLA is enabled everywhere.
This same setup works on Windows using the Remote Desktop Connection client.
I found that if you edit the .rdp file and add the following line (no quotes):
"username:s: "
Then the user is prompted for credentials. You may also set it to be "username:s:domain\username".
This issue here appears that the Mac client is either ignoring the "prompt for credentials on client:i:1" setting, or it is passing blank credentials... or both.
I appreciate all the work the MS team (and iTap) have done on this product... keep up the great work.
Example failing RDP file:
redirectclipboard:i:1
redirectprinters:i:1
redirectcomports:i:0
redirectsmartcards:i:1
devicestoredirect:s:*
drivestoredirect:s:*
redirectdrives:i:1
session bpp:i:32
prompt for credentials on client:i:1
span monitors:i:1
use multimon:i:1
remoteapplicationmode:i:1
server port:i:3389
allow font smoothing:i:1
promptcredentialonce:i:1
videoplaybackmode:i:1
audiocapturemode:i:1
gatewayusagemethod:i:1
gatewayprofileusagemethod:i:1
gatewaycredentialssource:i:0
full address:s:RDCB.COMPANY.COM
alternate shell:s:||Notepad
remoteapplicationprogram:s:||Notepad
gatewayhostname:s:rdgateway.COMPANY.com
remoteapplicationname:s:Notepad
remoteapplicationcmdline:s:
workspace id:s:RDCB.COMPANY.com
use redirection server name:i:1
loadbalanceinfo:s:tsv://MS Terminal Services Plugin.1.Notepad
alternate full address:s:RDCB.COMPANY.COM
signscope:s:Full Address,Alternate Full Address,Use Redirection Server Name,Server Port,GatewayHostname,GatewayUsageMethod,GatewayProfileUsageMethod,GatewayCredentialsSource,PromptCredentialOnce,Alternate Shell,RemoteApplicationProgram,RemoteApplicationMode,RemoteApplicationName,RemoteApplicationCmdLine,RedirectDrives,RedirectPrinters,RedirectCOMPorts,RedirectSmartCards,RedirectClipboard,DevicesToRedirect,DrivesToRedirect,LoadBalanceInfo
signature:s:ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCAB ABCXXX123xDummyDataHerex321XXXCABHi,
I too have this problem but I am unsure of how you fo about adding the "username:s:domain\username"
into the file as it is downloaded via the RD Web Access page.
I know that I can edit the RDP file after the event and then send it to my users but I don't want the
hassle of doing this,
The weird thing is that ver 8.0.8 release notes say that there is a "Fix for the issues of starting remote connection from RDP files that included gateway information"
Anybody have any ideas?
Thanks,
Jaggie -
Logon failed error when launching Web Intelligence from InfoView
After changing the Web Intelligence preferences in BusinessObjects Enterprise XI 3.0 Java InfoView to launch the desktop or rich client option, I get a "logon failed" error message. However, when I launch Web Intelligence Rich Client from 'Start > Programs >...' directly, the same logon information is successful. The logon is set to use Enterprise authentication which is the same logon information used to launch InfoView and Web Intelligence.
Why does the logon fail when I launch Web Intelligence from InfoView?
Edited by: Ana on Mar 31, 2009 3:43 PMI deleted the report completely and rebuilt it from scratch, and also added names for the data table and data set generated within the project and finally, success!
Jason, thanks so much for your help which got me moving on this again. -
Launching BeX Analyzer from BeX Query Designer
Hi,
We are using BeX Frontend version 7.x.
In the Query Designer, when you presss the 'Execute' button, it generally opens the report on the web (calls the portal). Is there any way to change this so that when you press 'Execute', it runs the report on the BeX Analyzer?
Best Regards,
RajibHello...
I regret to inform you, there is no way to do such a thing.
You cannot call via "Query Designer" the "BEx Analyzer".
I don't thing my suggestion is very helpful, but as workaround, you can call via SAPGUI, with transaction RMMX.
I personally suggest you to install and use the BI Java stack, since the BI 7.0 addons was designed to work together with an BI Java Portal.
Thanks...
Best regards,
Edward John -
Javascript error when launching XFA pdf from browser
Hi all,
I am trying to use my XFA PDF from a browser. On my local system I have set up a web server and am launching my PDF from there. However, I am getting a ReferenceError with regards to one of my Javascript functions.
My PDF has dependency on a javascript file that resides in the Acrobat path as follows:
C:\Program Files\Adobe\Acrobat 9.0\Acrobat\Javascripts\
When I use my PDF directly from an Acrobat instance, everything works fine. The issue comes up only when launching from server. How do I link the javascript file to my PDF?
Edit: The user is going to be launching the PDF from the server via a web browser. In such a case where do I place the javascripts?
Help appreciated,
Thanks@George: thanks for the quick response!
My JS code contains a readFileIntoStream which I learnt is also to be run under privileged context. (still learning the ropes here.. ). I have been trying to incorporate the JS code directly into the PDF to get around this privileged context.. but I am unable to find a non-privileged equivalent for readFileIntoStream..
Basically my users would be accessing the PDF from the server direct via the browser. For my testing purposes I am able to run the PDF directly from my desktop via an Acrobat instance without any hitch as the scripts are folder level like you mentioned. Is it possible for the users to be able to access the javascripts from anywhere on the server rather than directly from the PDF? Please note, users will not be saving copies of the PDF on to their local machines (in which case we could have pushed the JS file along to their machines) . I need to ultimately run the PDF from browser.
I hope I am clear..
Thanks. -
Blank PAge when Launching WEB IC from Portal--Very Urgent
Hi,
We are using CRM 5.0 EIC scenario
We have just configured new application server (adding one more to existing servers), when we lauch EIC (interaction centre) from this new server, it shows nothing, it just displays blank page,
Need very very urgently
MAx points would be awarded
RIn CRM 5.0 does t-code CRM_IC launch the page for you correctly? if yes then I think you need to have your portal admin check this as it would seem portal related.
-
Parameters not set error, when launching jdev 9i from Unix
Hi,
I have downloaded the patch to install jdeveloper ( p4141787_11i_GENERIC.zip )
and ftp'ed to Unix directory and unzipped.
I have modified the jdev.conf to the location where SDK is installed. we are using SDK version 1.4.2.06
I have set up the variable, JDEV_USER_HOME
When I run the jdev.exe script from jdevbin/jdev/bin
. jdev
I get the below error, saying that the parameters are not set.
Oracle9i JDeveloper
Copyright 1997, 2003 Oracle Corporation. All Rights Reserved
sh: JDEV_NATIVE_PATH: Parameter not set.
sh: JDEV_VERBOSE_MODE: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_NATIVE_PATH: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_CLASSPATH: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JDEV_APP_OPTS: Parameter not set.
sh: JDEV_VERBOSE_MODE: Parameter not set.
sh: JDEV_JAVA_VM: Parameter not set.
sh: JDEV_VM_OPTS: Parameter not set.
sh: JAVA: Parameter not set.
Appreciate your help.
Thanks
Srini PendemHi,
If this is happens only with services view bills, view consumption history.. or this happens for every other service if you are trying to access 5 minutes after logon.
Have to restarted your ITS server after changing these parameters.
well i am not aware of any ITS based service Bill.. can you please help me out.. if this is part of ESS/MSS service.
regards,
Sudhir -
Variant not being used when launching MDT report from Portal
Hi,
I have set up the reporting i-view in MSS to use MDT. In the "Define Function Codes" activity in the IMG under Managers Desktop I have set up Transaction Code S_AHR_61015536 (Expired Qualifications Report) to use variant MSS.
However when I launch the report via the MDT i-view it takes no consideration of the variant used.
Has anyone else encountered this problem before?
Thanks
TomCheck this
Please kindly correct the variant in the table T77I3 or you can correct
the customizing at SPRO:
Personnel Management->
Manager's Desktop->
Human Resources Information Systems->
HIS -> Define task functions
Area HRTIM -
Excel macro to launch Bex analyzer
Hi,
first of all congratulation to the forum. really interesting and useful.
I am trying to write a macro that launches Bex analyzer from an excel template.
I have been trying with:
Dim RetVal
RetVal = Shell("C:\Program Files\....\BW\sapbex.xla", 1)
with no success so far.
has anybody got any suggestions?
thanks in advance and best regards
davidHello,
R u working as Security consultant or BI developer.
If you are a BI developer you dont have access to Auth objects S_RFC.
If you are security consultant you have access and to look where for S_RFC.
I dont know how your roles organaized.But try this way.
1. gO TO TRANSACTION SUIM
2. select ROLES.
3. Under roles select Roles by Complex Selection Criteria.
4. Under this go to 4 th box Selection by profiles and Authorization Objects
5. enter S_RFC in Authorization Object.
and execute.Then you get all the roles in which S_RFC is there.
Then see the roles of the user for whoom RRMX does not work.
and match the role to the selection criteria and make the changes to S_RFC in the role.
generate role and save.
If you are not security consultant u dont have access to any of these.
Consult u r basis or security team and tell them to check the values of S_RFC.
Getback if u have any questions.
Abhiram -
Error when launching Key figure monitor iview in portal
Hi all,
I get an error when launching a key figure monitor iview in portal ; the error is RABAX-STATE
In r/3 under transaction ST22 i got following :
"UNCAUGHT_EXCEPTION" "CX_WDR_RT_EXCEPTION"
"CL_WDR_INTERNAL_WINDOW========CP" or "CL_WDR_INTERNAL_WINDOW========CM00B"
"IF_WD_WINDOW~SUBSCRIBE_TO_BUTTON_EVENT"
Anybody knows how to resolve the problem?
Regards
GwenHey was your problem resolved ???
I am facing the same problem..
please help!!!
reply asap.
~Veena.
Maybe you are looking for
-
I just want to be able to go on other websites and scroll while playing music (smoothly) on youtube in another tab. I don't think this happened until after I updated my firefox to 13 and my shockwave flash plug-in to 11.3.300.257 How can I fix this c
-
Photo-gallery examples / how to ?
Is there a tutorial on how to create a Spry photo-gallery, or do we just view the source code for the example page at the Adobe site? Which relevant files are need to make this work? Nadia Adobe® Community Expert : Dreamweaver CSS Templates |Tutorial
-
Preview window stops working when skimming
I have a top end MacBook Air (i7 / 4Gb) and find iMovie 11 works very well on it. However, recently I've been having problems with the preview window. I can be editing for some time when the preview window will just display the last frame that I play
-
the lower portion of my ipod touch gets hot whenever I use it or charge it. i dnt knw if its becuz of the chrger. Im chrgng either via pc or via belkin chrger. Help....
-
I want to post Rough Goods Receipt ( RGR ) with an IDOC 1 . Do we have any Standard IDOC to post RGR 2 . Any BAPI available to post RGR through interface 3 . HOW to post RGR with custom IDOC Any pointers will be highly appreciated. Thanks V