Error when loading 0employee_attr
Hello
I am facing some weird kind of probelm when i try to load data of 0EMPLOYEE_ATTR. im trying to load data of first 100 employes. data size is very small. in data monitor after few seconds it display the error message with caller09. it seems to me like somebody is trying to change data in ecc but i have chked it on the weekend when nobody was accessing the ecc system and tried to upload but unseccessful.
there are no trfc in the source system, i have also check the prcoess overview and job overview but nothing is helpful. in job overview in the log i just get memory parameters and nothing else. memory parameters are fine as othere datasources are loading data even with 1 milllion records but 0empoyee_attr i am facing for the first 100 records.
i have chked though slg1, rsdmd and me_del, its k.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
hi,
As per my Understanding whenever there is caller 09 error , it is the issue related to source system.
there may be some issue with datasource. in processmonitor there is a error message button in Ststus teb just cleck on it and see what it is showing. also you can get system suggestions by clicking "?".
further I would suggest you to try following:
1) replicate your datasource.
2) Activate your Transfer rule and transfer structure.
than try to reload the data. it may solve your problem.
Hope it will help.
Jitendra
Similar Messages
-
ORA-00054 error when loading Oracle table using Data Services
Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Mariethe ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright. -
Error when loading XSLT mapping of the application
Hi,
I am using XSLT mapping in XI.
It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- <!-- Request Message Mapping
-->
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>com/cba/***.xsl</SAP:P1>
<SAP:P2>urn:**:**</SAP:P2>
<SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Yes, I have activated it
Regards,
Anirudh.hi
please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
reward points if found helpfull
regards
chandra.k -
Error when loading data in Infopackage
Hi Friends,
I'm getting the following error when loading please help it is quite urgent.
Value 'ZSATX #1 ' (hex. '436F6E7461696E6572202331 ') of characteristic ZSIGNI contains invalid characte BRAIN
Thnaks ,Hi Smily,
It refers to an invalid char found in this InfoObject value. Does your system have anything maintained in RSKC?
For good info you can refer to Eugene's blogs:
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
Hope this helps... -
Hi Friends,
I getting an error when loading the Infopackage ,
"Value 'sss ' (hex. '737373 ') of characteristic Zapple contains invalid characters"
I used the formula "To upper" in my T/R still I was getting the same error" and also I edited the value in PSA to "SSS" and loaded and still pointing to the same error. when I do a find for "sss" I dont see any value in PSA.
Please advice, it will be really appreciated,
thanks alot in advanceHi,
U cont see the special characters in display mode in PSA...
for that First the check the reason for error,
it is from PSA, and the status in the monitor turned to red with errors or collection eneded with source system.. then go to manage of data target delete the red request... now go to PSA in modelling then select ur infosource right click select the option edit PSA data..
Now u can see the some special characteristics in the record that error occured... once it is complete then save come back to PSA screen then once again right click on the Infosource select immeadiate update.. it will work fine..
Siddhu -
Error -5000 and: Error when loading the transcode setting
For a couple of days I've been trying to export my project on a DVD, but on the half way of the transcoding it comes the Error -5000, and then there is such a message, something about the navigation, can't be found etc... I work on a mac OS X, using Encore CS3, all my data I've got on my external harddisk, with space of 80 GB.
Besides, when I'm trying to export my project on a blu-ray disc, there comes a message: Error when loading the transcode setting! I know that there are only two codecs there - H.264 and MPEG-2, and there are only MPEG-2 movie files there, so I set the MPEG-2 codec. And there comes such a thing! Having set the H.264, there comes the same. What can it be?
And the last one is the copy protection. I know that it can be activated, with CGMS and Macrovision, only if the CSS option is set on "permit no copies". So I do, and then there comes a message - "for these settings there is no copy protection provided". So what now to do?My flash drive PNY comes up with error -5000 and i do not know what to do can you help me with this problems
-
Dear all,
Do we have any extra things to execute the Java mapping using the Sax Parser?
When I am executing the interface mapping ,I am getting the" Linkage error when loading the class" error.
Kindly let me know your personnel maildId so that I can mail you the screen shots.
Thanks,
SrinivasaDear sunil,
Find the File.
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
Source:
<MTO_FTP_MAT_DETAILS>
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
TARGET
MTI_FTP_MAT_DETAILS
<MATDETAILS>
<MAKTX>
<MATNR>
<WERKS>
<LABST>
<MEINS>
<PERCNT>
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.Map;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.Attributes;
import org.xml.sax.SAXException;
import org.xml.sax.helpers.DefaultHandler;
import com.sap.aii.mapping.api.StreamTransformation;
class Echo {
public static OutputStream out;
public class myEcho extends DefaultHandler implements StreamTransformation {
private Map map;
public void setParameter(Map param) {
map = param;
public void execute(InputStream in, OutputStream out) {
DefaultHandler handler = this;
SAXParserFactory factory = SAXParserFactory.newInstance();
try {
SAXParser saxParser = factory.newSAXParser();
Echo.out = out;
saxParser.parse(in, handler);
} catch (Throwable t) {
t.printStackTrace();
public void startDocument() throws SAXException {
try {
Echo.out.write("<?xml version='1.0' encoding='UTF-8'?>".getBytes());
} catch (IOException e) {
e.notify();
public void endDocument() throws SAXException {
try {
Echo.out.flush();
} catch (IOException e) {
throw new SAXException("I/O error", e);
public void startElement(String namespaceURI, String sName, // simple name
String qName, // qualified name
Attributes attrs) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("<MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("<" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void endElement(String namespaceURI, String sName, // simple name
String qName // qualified name
) throws SAXException {
String eName = sName; // element name
if ("".equals(eName))
eName = qName; // not namespace-aware
if ("ns0:MTO_SAP_MAT_DETAILS".equals(qName)) {
try {
Echo.out.write(("</MTI_FTP_MAT_DETAILS>").getBytes());
} catch (Exception e) {
e.printStackTrace();
} else {
try {
Echo.out.write(("</" + qName + ">").getBytes());
} catch (Exception e) {
e.printStackTrace();
public void characters(char buf[], int offset, int len)
throws SAXException {
String s = new String(buf, offset, len);
try {
Echo.out.write(s.getBytes());
} catch (Exception e) {
e.printStackTrace(); -
I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer
I now get an 500 Internal Server error when loading Firefox, after updating RealPlayer.
When I try to open Firefox, it opens. But there is the error message.
What is this? How do I did rid of it?
'''bold text'''Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
You can also check the connection settings in Tools > Options > Advanced : Network : Connection<br />
If you do not need to use a proxy to connect to internet then select "No Proxy"
See "Firefox connection settings":
* [[Firefox cannot load websites but other programs can]] -
Report Designer - Error when Loading Report
Hi,
We have created a report in Report Designer (7.0) and saved it. When we execute it runs fine. After closing the report and trying to reopen it, the report does not open. It gives an error "Error when Loading Report". Our BI frontend patch is 14.
Did anyone encounter this issue and is there a solution to this.
Thanks
HemantHello,
Please go to SE38 -> RS_REPORT_MAINTAIN,
Type your report name, and DT als "Report Type".
Goto edit mode, copy&paste this XML into txt file and send it to me ([email protected]). I will check whats going on with this report. Loading should be always possible.
Regards, Karol Kalisz, BI Development -
Error when loading the callback component
Hi friends
Am getting this error. Error when loading the callback component. Am working in Travel expense workflow which is 2 level based on condition. If its EG > 8 its one level and EG < 8 its 2 level. When the approver does the approval am changing the status from 3 to 4 at that time the pernr is getting locked. Next step itself mail step. But the workflow is throwing the error and mail its hanging in the mail step. I have try to restart the workflow but its not restarting. Error when loading the callback component this error is showing in the lock pernr. Am not locking the pernr system locks the pernr by itslef and not unlocking the pernr. How to solve this issue.
Regards
vijayHello,
Check if OSS Note 854495 is applicable.
regards
Rick Bakker
Hanabi Technology -
I am getting a 403 error when loading WAP from the site https://localhost:30091.
It was working and suddenly stopped. How do I troubleshoot this issue ?Hi,
Do you use any proxy on the WAP server? If yes, please disable the proxy and try again.
Also, please check if there is any warning or error in the event viewer of the WAP server.
We can check the event of Azure Pack at Applications and Services Logs-->Microsoft-->WindowsAzurePack
Best Regards.
Steven Lee Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Caller 09 is missing error when loading
Hi,
I'm getting the above error when loading transaction data from source system. (connected to Oracle system with DBLink so the source system is Myself). This system has just been upgraded to 3.5 but I had similar issue in Dev prior to the upgrade so I don't think its upgrade related.
Full error message is that the datasource must be replicated. Timestamp in source system and timestamp in BW are different.
I've tried the following (several times).
1. Replicated datasource (by right clicking on source system underneath infosource), then used program RS_TRANSTRU_ACTIVATE_ALL to activate the transfer structures.
2. Replicated datasource then manually activated transfer structure, communication structure, regenerated underlying programs of transfer structure and PSA program.
3. I've already logged off and back on
4. I've gone into RSA5, and reactivated the extract structure.
In the infosource, if I display its status, its has last changed timestamp of today. But in the error message I'm getting a timestamp of 25.05.06 for source system and 25.1.2003 for BW (bearing in mind they are both in fact BW).
Any ideas? Please help !!
Thanks
SueHi,
Re: Errors when uploading ODS to infocube
1. Activate transfer rules that belongs to the data source
2. Activate the ODS
3. Activate the update rules (infosource to ODS)
4. Activate the update rules (ODS to infocube)
5. Right-click at the ODS, choose 'Generate Export Data Source'
6. Replicate the data source
Shreya -
Errors when loading data to ODS
Hi,
I am getting the following dump when loading data to ODS
whta might be the problem
Runtime Error MESSAGE_TYPE_X
Date and Time 29.09.2006 14:26:52
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
is especially useful if you want to keep a particular message.
Error analysis
Short text of error message:
Test message: SDOK_GET_PHIO_ACCESS 001
Technical information about the message:
Message classe...... "1R"
Number.............. 000
Variable 1.......... "SDOK_GET_PHIO_ACCESS"
Variable 2.......... 001
Variable 3.......... " "
Variable 4.......... " "
Variable 3.......... " "
Variable 4.......... " "
How to correct the error
Probably the only way to eliminate the error is to correct the program.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"MESSAGE_TYPE_X" C
"SAPLSDCL" or "LSDCLF00"
"INTERNAL_ERROR"
If you cannot solve the problem yourself and you wish to send
an error message to SAP, include the following documents:
1. A printout of the problem description (short dump)
To obtain this, select in the current display "System->List->
Save->Local File (unconverted)".
2. A suitable printout of the system log
To obtain this, call the system log through transaction SM21.
Limit the time interval to 10 minutes before and 5 minutes
after the short dump. In the display, then select the function
"System->List->Save->Local File (unconverted)".
3. If the programs are your own programs or modified SAP programs,
supply the source code.
To do this, select the Editor function "Further Utilities->
Upload/Download->Download".
4. Details regarding the conditions under which the error occurred
or which actions and input led to the error.
System environment
SAP Release.............. "640"
Application server....... "bomw093a"
Network address.......... "132.186.125.66"
Operating system......... "Windows NT"
Release.................. "5.2"
Hardware type............ "4x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 16
Short dump setting....... "full"
Database server.......... "BOMW093A"
Database type............ "ORACLE"
Database name............ "BIW"
Database owner........... "SAPDAT"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Nov 4 2004 23:26:03"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "OCI_920_SHARE "
Patch level.............. "43"
Patch text............... " "
Supported environment....
Database................. "ORACLE 8.1.7.., ORACLE 9.2.0.."
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
Memory usage.............
Roll..................... 8112
EM....................... 6271776
Heap..................... 0
Page..................... 24576
MM Used.................. 3921120
MM Free.................. 258392
SAP Release.............. "640"
User and Transaction
Client.............. 800
User................ "IC881147"
Language key........ "E"
Transaction......... " "
Program............. "SAPLSDCL"
Screen.............. "SAPMSSY0 1000"
Screen line......... 6
Information on where terminated
The termination occurred in the ABAP program "SAPLSDCL" in "INTERNAL_ERROR".
The main program was "RSRD_BROADCAST_PROCESSOR ".
The termination occurred in line 25 of the source code of the (Include)
program "LSDCLF00"
of the source code of program "LSDCLF00" (when calling the editor 250).
The program "SAPLSDCL" was started as a background job.
Job name........ "SECOQUERY"
Job initiator... "IC881147"
Job number...... 14265102
Source Code Extract
Line
SourceCde
1
2
INCLUDE LSDCLF00 *
3
4
5
6
FORM INTERNAL_ERROR *
7
8
Handles unexpected error conditions (internal errors)
9
10
--> VALUE(U_ROUTINE) Routine/function module where error occured
11
--> VALUE(U_ERROR_CODE) Identifier in routine (e.g. number)
12
--> VALUE(U_VAR1) Variable containing further information
13
--> VALUE(U_VAR2) Variable containing further information
14
--> VALUE(U_VAR3) Variable containing further information
15
--> VALUE(U_VAR4) Variable containing further information
16
17
form internal_error
18
using value(u_routine)
19
value(u_error_code)
20
value(u_var1)
21
value(u_var2)
22
value(u_var3)
23
value(u_var4).
24
>>>>>
message x000 with u_routine u_error_code u_var1 u_var2.
26
27
endform.
28
29
30
*& Form BAD_OBJECT_TO_SYMSG
31
32
maps error information in u_bad_object into system message
33
variables
34
35
--> VALUE(U_BAD_OBJECT) structure containing error information
36
37
form bad_object_to_symsg
38
using value(u_bad_object) type sdokerrmsg.
39
40
sy-msgid = u_bad_object-id.
41
sy-msgty = u_bad_object-type.
42
sy-msgno = u_bad_object-no.
43
sy-msgv1 = u_bad_object-v1.
44
sy-msgv2 = u_bad_object-v2.
Contents of system fields
Name
Val.
SY-SUBRC
0
SY-INDEX
0
SY-TABIX
1
SY-DBCNT
4
SY-FDPOS
0
SY-LSIND
0
SY-PAGNO
0
SY-LINNO
1
SY-COLNO
1
SY-PFKEY
SY-UCOMM
SY-TITLE
Report Dissemaintion Framework: Executing the Transferred Settings
SY-MSGTY
X
SY-MSGID
1R
SY-MSGNO
000
SY-MSGV1
SDOK_GET_PHIO_ACCESS
SY-MSGV2
001
SY-MSGV3
SY-MSGV4
Active Calls/Events
No. Ty. Program Include Line
Name
15 FORM SAPLSDCL LSDCLF00 25
INTERNAL_ERROR
14 FORM SAPLSDCI LSDCIU13 303
PHIO_GET_CONTENT_ACCESS
13 FUNCTION SAPLSDCI LSDCIU13 113
SDOK_PHIO_GET_CONTENT_ACCESS
12 FUNCTION SAPLSKWF_CONTENT LSKWF_CONTENTU02 63
SKWF_PHIO_CONTENT_ACCESS_GET
11 METHOD CL_RSRA_KWF_UTILITIES=========CP CL_RSRA_KWF_UTILITIES=========CM00B 50
CL_RSRA_KWF_UTILITIES=>COPY_MIME_TO_FOLDER
10 METHOD CL_RSRA_KWF_TMPL==============CP CL_RSRA_KWF_TMPL==============CM002 28
CL_RSRA_KWF_TMPL=>GET_STYLESHEET
9 METHOD CL_RSRA_KWF_TMPL==============CP CL_RSRA_KWF_TMPL==============CM001 227
CL_RSRA_KWF_TMPL=>CONSTRUCTOR
8 METHOD CL_RSRA_ENGINE_BC=============CP CL_RSRA_ENGINE_BC=============CM010 9
CL_RSRA_ENGINE_BC=>SET_TEMPLATE_FOLDER
7 METHOD CL_RSRA_ENGINE_BC=============CP CL_RSRA_ENGINE_BC=============CM001 75
CL_RSRA_ENGINE_BC=>CONSTRUCTOR
6 METHOD CL_RSRA_JOB===================CP CL_RSRA_JOB===================CM003 47
CL_RSRA_JOB=>EXECUTE_SINGLE
5 METHOD CL_RSRA_JOB===================CP CL_RSRA_JOB===================CM00E 14
CL_RSRA_JOB=>EXECUTE_SINGLE_RC
4 METHOD CL_RSRD_PRODUCER_RA===========CP CL_RSRD_PRODUCER_RA===========CM001 147
CL_RSRD_PRODUCER_RA=>IF_RSRD_F_PRODUCER_RT~PRODUCE
3 METHOD CL_RSRD_SETTING===============CP CL_RSRD_SETTING===============CM005 28
CL_RSRD_SETTING=>EXECUTE_NODES
2 METHOD CL_RSRD_SETTING===============CP CL_RSRD_SETTING===============CM002 73
CL_RSRD_SETTING=>EXECUTE
1 EVENT RSRD_BROADCAST_PROCESSOR RSRD_BROADCAST_PROCESSOR 197
START-OF-SELECTION
Chosen variables
Name
Val.
No. 15 Ty. FORM
Name INTERNAL_ERROR
U_ROUTINE
SDOK_GET_PHIO_ACCESS
54445445554445444455
34FBF754F089FF133533
SY-MSGV1
SDOK_GET_PHIO_ACCESS
54445445554445444455222222222222222222222222222222
34FBF754F089FF133533000000000000000000000000000000
U_ERROR_CODE
001
333
001
SY-MSGV2
001
33322222222222222222222222222222222222222222222222
00100000000000000000000000000000000000000000000000
U_VAR1
2
0
SY-MSGV3
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
SDOKI_MODE_DELETE
5
0000
5000
U_VAR2
2
0
SY-MSGV4
22222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000
No. 14 Ty. FORM
Name PHIO_GET_CONTENT_ACCESS
SYST
####################################################A#######P###############è#################
0000000000000000000000000000000000000000000000000000400000005000000000000000E00000000000000000
0000000010002000000000000000000000000000400000001000100010000000000000000000840000000000000000
PHIO_OBJECT_ID-CLASS
2222222222
0000000000
DUMMY_VERSTYPE
0
3
0
DUMMY_FCT_EXPORT
222222222222222222222222222222
000000000000000000000000000000
DUMMY_FCT_IMPORT
222222222222222222222222222222
000000000000000000000000000000
DUMMY_FCT_DELETE
222222222222222222222222222222
000000000000000000000000000000
FCT_VIEW
222222222222222222222222222222
000000000000000000000000000000
BUFF_XPIRE
000000000000
333333333333
000000000000
NO_BUFFER
2
0
SUBRC_AUX
3
0000
3000
SDOKA_EVENT_PH_FROM_REL_PRE
0022
3333
0022
SCREEN
%_17SNS0001592815_%_%_%_%_%_%_
2533545333333333352525252525252222222222222222222222222222222222222222222222222222222222222222
5F173E30001592815F5F5F5F5F5F5F0000000000000000000000000000000000000000000000000000000000000000
<%_TABLE_SDOKSTRE>
SY-XFORM
CONVERSION_EXIT
444545544454545222222222222222
3FE65239FEF5894000000000000000
CONTEXT[]
Table IT_5544[0x89]
FUNCTION=SKWF_PHIO_CONTENT_ACCESS_GETDATA=CONTEXT[]
Table reference: 324
TABH+ 0(20) = 00000000801CE03C0000000044010000A8150000
TABH+ 20(20) = 0000000059000000FFFFFFFF047B0200D00E0000
TABH+ 40( 8) = 10000000C1248000
store = 0x00000000
ext1 = 0x801CE03C
shmId = 0 (0x00000000)
id = 324 (0x44010000)
label = 5544 (0xA8150000)
fill = 0 (0x00000000)
leng = 89 (0x59000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000058
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x381CE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x98DC033D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
CONTEXT
22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PROPERTIES[]
Table[initial]
PROPERTIES
22222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
No. 13 Ty. FUNCTION
Name SDOK_PHIO_GET_CONTENT_ACCESS
ALLOW_MODEL
2
0
CACHE_SERVER
0000000000
2222222222222222222222222222222222222222222222222222222222222222333333333322222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
CLIENT
800
333
800
CONTENT_ONLY
X
5
8
CONTENT_OR_URL_ONLY
2
0
OBJECT_ID
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
RAW_MODE
2
0
TEXT_AS_STREAM
X
5
8
USE_URL_AT
2
0
ACCESS_MODE
00
33
00
DOCUMENT_HTTPS_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
DOCUMENT_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
MODEL_RETURNED
2
0
COMPONENTS[]
Table[initial]
COMPONENT_ACCESS[]
Table IT_5533[0x8616]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_COMPONENT_ACCESS
Table reference: 337
TABH+ 0(20) = 00000000481BE03C00000000510100009D150000
TABH+ 20(20) = 00000000A8210000FFFFFFFF04C5010088190000
TABH+ 40( 8) = 01000000C1248000
store = 0x00000000
ext1 = 0x481BE03C
shmId = 0 (0x00000000)
id = 337 (0x51010000)
label = 5533 (0x9D150000)
fill = 0 (0x00000000)
leng = 8616 (0xA8210000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000107
occu = 1 (0x01000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x001BE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x985D043D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
CONTEXT[]
Table IT_5544[0x89]
FILE_CONTENT_ASCII[]
Table IT_5534[0x1022]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_FILE_CONTENT_ASCII
Table reference: 312
TABH+ 0(20) = 00000000B01BE03C00000000380100009E150000
TABH+ 20(20) = 00000000FE030000FFFFFFFF04C50100D81A0000
TABH+ 40( 8) = 10000000C1248000
store = 0x00000000
ext1 = 0xB01BE03C
shmId = 0 (0x00000000)
id = 312 (0x38010000)
label = 5534 (0x9E150000)
fill = 0 (0x00000000)
leng = 1022 (0xFE030000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000113
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x681BE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0xB813043D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
FILE_CONTENT_BINARY[]
Table IT_5535[0x1022]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_FILE_CONTENT_BINARY
Table reference: 325
TABH+ 0(20) = 00000000181CE03C00000000450100009F150000
TABH+ 20(20) = 00000000FE030000FFFFFFFF04C50100101B0000
TABH+ 40( 8) = 10000000C1248000
store = 0x00000000
ext1 = 0x181CE03C
shmId = 0 (0x00000000)
id = 325 (0x45010000)
label = 5535 (0x9F150000)
fill = 0 (0x00000000)
leng = 1022 (0xFE030000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000114
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = Not allocated
pghook = Not allocated
idxPtr = Not allocated
refCount = Not allocated
tstRefCount = Not allocated
lineAdmin = Not allocated
lineAlloc = Not allocated
store_id = Not allocated
shmIsReadOnly = Not allocated
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0xD01BE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0xC08FD33C
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
PROPERTIES[]
Table[initial]
COMPONENT_ACCESS
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
FILE_CONTENT_ASCII
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
FILE_CONTENT_BINARY
0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.1.
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
OBJECT_ID_AUX
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
X_DOCUMENT_URL
X
5
8
X_DOCUMENT_HTTPS_URL
X
5
8
X_COMPONENT_ACCESS
X
5
8
SUBRC_AUX
0
0000
0000
%_DUMMY$$
2222
0000
%_SPACE
2
0
SY-REPID
SAPLSDCI
5454544422222222222222222222222222222222
310C343900000000000000000000000000000000
No. 12 Ty. FUNCTION
Name SKWF_PHIO_CONTENT_ACCESS_GET
CACHE_SERVER
0000000000
2222222222222222222222222222222222222222222222222222222222222222333333333322222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PHIO
2222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000
USE_URL_AT
2
0
X_ALLOW_MODEL
2
0
X_CONTENT_ONLY
X
5
8
X_CONTENT_OR_URL_ONLY
2
0
X_RAW_MODE
2
0
X_TEXT_AS_STREAM
X
5
8
ACCESS_MODE
00
33
00
DOCUMENT_HTTPS_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
DOCUMENT_URL
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
ERROR
000
2222222222222222222223332222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
X_MODEL_RETURNED
2
0
COMPONENT_ACCESS[]
Table IT_5533[0x8616]
CONTEXT[]
Table IT_5544[0x89]
FILE_CONTENT_ASCII[]
Table IT_5534[0x1022]
FILE_CONTENT_BINARY[]
Table IT_5535[0x1022]
PROPERTIES[]
Table[initial]
SKWFA_C_ACT_READ
03
33
03
SYST-REPID
SAPLSKWF_CONTENT
5454545454445445222222222222222222222222
310C3B76F3FE45E4000000000000000000000000
%_ARCHIVE
2222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222
0000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
PHIO+1(42)
222222222222222222222222222222222222222222
000000000000000000000000000000000000000000
CL_ABAP_TABLEDESCR=>TABLEKIND_STD
S
5
3
SKWFC_YES
X
5
8
No. 11 Ty. METHOD
Name CL_RSRA_KWF_UTILITIES=>COPY_MIME_TO_FOLDER
I_S_MIME_IO
FM_FOLDER 3AA00E1E0D0E3DCBE10000000A1144B5
4454444452234433434343434444333333334333343
6DF6FC4520031100515040534325100000001114425
I_S_FOLDER_IO
FBW_FLD 08BSWBLVV6N1IJCIG3VHEX2H8
4455444222233455445534344444354453432222222
627F6C40000082372C666E19A397368582880000000
L_T_PROPERTY_REQUEST
Table IT_5512[1x25]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_PROPERTY_REQUEST
Table reference: 316
TABH+ 0(20) = 28D5D23C68D5D23C000000003C01000088150000
TABH+ 20(20) = 0100000019000000FFFFFFFF04C5010038110000
TABH+ 40( 8) = 10000000C1248400
store = 0x28D5D23C
ext1 = 0x68D5D23C
shmId = 0 (0x00000000)
id = 316 (0x3C010000)
label = 5512 (0x88150000)
fill = 1 (0x01000000)
leng = 25 (0x19000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000069
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 1
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0xC00BE03C
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 3644 (0x3C0E0000)
shmIsReadOnly = 0 (0x00000000)
>>>>> 1st level extension part <<<<<
regHook = 0x00000000
hsdir = 0x00000000
ext2 = 0x600DE03C
>>>>> 2nd level extension part <<<<<
tabhBack = 0x98D5033D
delta_head = 000000000000000000000000000000000000000000000000000000000000000000000000
pb_func = 0x00000000
pb_handle = 0x00000000
L_S_PROPERTY_REQUEST
KW_RELATIVE_URL
4555444545455542222222222
B7F25C14965F52C0000000000
L_T_PHIO
Table IT_5494[1x43]
CLASS=CL_RSRA_KWF_UTILITIESMETHOD=COPY_MIME_TO_FOLDERDATA=L_T_PHIO
Table reference: 309
TABH+ 0(20) = E8D4D23CE0D3D23C000000003501000076150000
TABH+ 20(20) = 010000002B000000FFFFFFFF04C5010018120000
TABH+ 40( 8) = 10000000C1248000
store = 0xE8D4D23C
ext1 = 0xE0D3D23C
shmId = 0 (0x00000000)
id = 309 (0x35010000)
label = 5494 (0x76150000)
fill = 1 (0x01000000)
leng = 43 (0x2B000000)
loop = -1 (0xFFFFFFFF)
xtyp = TYPE#000073
occu = 16 (0x10000000)
access = 1 (ItAccessStandard)
idxKind = 0 (ItIndexNone)
uniKind = 2 (ItUniqueNon)
keyKind = 1 (default)
cmpMode = 2 (cmpSingleMcmpR)
occu0 = 1
collHash = 0
groupCntl = 0
rfc = 0
unShareable = 0
mightBeShared = 0
sharedWithShmTab = 0
isShmLockId = 0
gcKind = 0
isUsed = 1
>>>>> Shareable Table Header Data <<<<<
tabi = 0x2010E03C
pghook = 0x00000000
idxPtr = 0x00000000
refCount = 0 (0x00000000)
tstRefCount = 0 (0x00000000)
lineAdmin = 16 (0x10000000)
lineAlloc = 16 (0x10000000)
store_id = 3643 (0x3B0E0000)
shmIsReadOnly = 0 (0x00000000)Hi priya,
Not sure: check syntax in your Update Roules, also at level of start routine.
Ciao.
Riccardo. -
Error when loading a flat file
Hello,
I am trying to load a flat file into our BW for the first time. I keep getting the error:
Error 1 when loading external data
Message no. RSAR234
I have search SDN and looked at the OSS notes and have tried several suggestions, but I still cannot get the file to load. We are currently on version 3.5.
My transfer structure and flat file do match.
My transfer structure for IO_MAT_ATTR has a transfer method of PSA and is laid out as follows:
IO_MAT Material Number IO_MAT
IO_MATNM Material Name IO_MATNM
IO_MAT is: CHAR 15
IO_MATNM is: CHAR 30
My flat file is saved as a CSV and is as follows:
MATONE,TEA
MATTWO,COFFEE
My file is saved on my local PC and is not open when I try to load it. When I attempt to preview the file in my infopackage, I get the same error there as well.
Any suggestions would be greatly appreciated.
Thanks
CharlaHi Charla,
Error 1 means that the system is unable to access the file. Make sure that the path is correct and also check if the data separator is correctly defined in the "external tab" of the infopackage.
I guess the settings in the "external tab" of the infopackage have some issues.
Bye
Dinesh -
JSP on BEA Weblogic: random error when loading a jsp page that uses a Bean
Hi!
I wrote a simple jsp page that stores a String in a JavaBean, and then forwards to another jsp page to display that String. The jsp pages are deployed on a BEA Weblogic 6 Server, but I get a weird behaviour when loading the page into my browser. Usually I get an error message:
/Response.jsp(9): class 'query.jsp.QueryBean' could not be loaded
probably occurred due to an error in /Query.jsp line 9:
<jsp:useBean id = "queryBean" scope = "request" class = "query.jsp.QueryBean" />
But the funny thing is that after reloading the page a few times it eventually works. The bahaviour seems to be totally random - sometimes it works, sometimes it claims not finding the JavaBean class.
Anyone experienced something similar?
Thank you very much,
CharlieIs QueryBean.class located under '<appname>/Web_inf/query/jsp/'?
If it is please try changing the package name to something else like com.myclass or something like that.
Maybe you are looking for
-
IPod Nano shuts down randomly and doesn't restart unless connected
This happened to me two days ago. I was working on a pool listening to a podcast, with the iPod in my pocket. I was wearing black pants and it was very hot, so I'm not sure if it's simply an issue of overheating, but what happened was while I was lis
-
After 1.2.3 update, Ipod freezes playing songs and is SLOW
Hello, I updated my 5th Generation to 1.2.3 with Itunes at the latest level. Now the Ipod plays for awhile and then pauses for 30 seconds and then continues playing the song. It also takes about a minute for a playlist to begin playing. All worked we
-
Error when downloading itunes purchases
When I go to download from the iTunes store the downloading bar keeps restarting over and over again and then I get this message. Anyone what is going on? I tried several times to redownload and no sucess.
-
Safari - spyglass to open downloaded file in Finder fails
Just upgraded to 9.0 mavericks - I use Pathfinder 6 - fixed (no more hang). Download in Safari work just fine and end up in the right folder but I can't use the spyglass to highlight a downloaded file in a finder winder I get an error about not findi
-
Hi Friends, in screen painter property windows is not opening / working for me. but previously it was working fine. any idea how i will get this property window again. Note: this is not working for only one company where its are orking for others com