Error when loading Itunes

I have just installed windows xp onto my computer (previously windows vista). All drivers and every other program works fine, but when I try to load itunes I get the following:
During the "determining gapless playback information" stage at about 2295 songs in Windows completely shuts down with an error message stating: KernelStack_Inpageerror.
Anyone out there have an idea of how to fix this?

During the "determining gapless playback information" stage at about 2295 songs in Windows completely shuts down with an error message stating: KernelStack_Inpageerror.
Are any of your content files stored on a RAID array, or SATA drive on that system?

Similar Messages

Window error when loading iTunes

This is what the error reads
"iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
I sent the error report to MS and they came back with this from Apple:
iTunes 6 for Windows unexpectedly quits when opened
Under some situations, iTunes may quit unexpectedly when you open it. You may see the error message:
"iTunes has experienced an error and needs to close. Do you want to send the error to Microsoft?"
To resolve this issue, remove all QuickTime installations and repair iTunes, which will install QuickTime 7 on your computer.
1. On the Start menu, click Control Panel.
2. Open the "Add or Remove Programs" control panel.
3. Select QuickTime.
4. Click the Change/Remove button.
5. Click Remove.
6. Click OK.
7. Repeat steps 3 through 6 if you have multiple QuickTime entries listed.
8. Select iTunes.
9. Click the Change/Remove button.
10. Click Repair.
11. Click OK.
Tried this fix but I cant find QuickTime in my add/remove programs list. I've looked everywhere anyone have any ideas on this problem?
thanks in advance,
Fleury
Windows XP Pro

hi Fleury!
... might as well reply to you here ...
Tried this fix but I cant find QuickTime in my add/remove programs list. I've looked everywhere anyone have any ideas on this problem?
first download, install, and run the Windows Installer CleanUp utility to remove any existing QT 7 installation registry entries:
Description of the Windows Installer CleanUp Utility
... and then use the Quicktime components of the uninstall instructions in the following document as a guide to a manual uninstall of the QT program files and folders:
Troubleshooting iTunes, iPod Software, and QuickTime installation on Windows
(it's also a good idea to switch off antivirus and antispyware applications prior to the repair install.)
keep us posted.
love, b

Windows error when loading iTunes

This is what the error reads
"iTunes has encountered a problem and needs to close. We are sorry for the inconvenience."
I sent the error report to MS and they came back with this from Apple:
iTunes 6 for Windows unexpectedly quits when opened
Under some situations, iTunes may quit unexpectedly when you open it. You may see the error message:
"iTunes has experienced an error and needs to close. Do you want to send the error to Microsoft?"
To resolve this issue, remove all QuickTime installations and repair iTunes, which will install QuickTime 7 on your computer.
1. On the Start menu, click Control Panel.
2. Open the "Add or Remove Programs" control panel.
3. Select QuickTime.
4. Click the Change/Remove button.
5. Click Remove.
6. Click OK.
7. Repeat steps 3 through 6 if you have multiple QuickTime entries listed.
8. Select iTunes.
9. Click the Change/Remove button.
10. Click Repair.
11. Click OK.
Tried this fix but I cant find QuickTime in my add/remove programs list. I've looked everywhere anyone have any ideas on this problem? Im not sure, I had it working once on this PC I did a System Restore would that cause this issue?
thanks in advance,
Fleury

pple are having the same issue as you. Try downloading the Quicktime standalone and report back to us
http://www.apple.com/quicktime/download/standalone.html

Windows XP gives error when loading iTunes

I installed iTunes version 10.5.2.11 on my Windows XP Service pack 3 box. After installation I double click the icon on my desktop and I get the "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience" error message. All I can do is click send report or don't send report and Itunes will never open.

After installation I double click the icon on my desktop and I get the "iTunes has encountered a problem and needs to close. We are sorry for the inconvenience" error message.
Generate another of those error messages and click the "Click here" link in the error message box. What modname and modver are showing for the error? (Precise spelling please.)
If the error is a BEX and thus doesn't show an modname or modver, let us know what P1 through P9 items are showing for you instead.

Error message when loading itunes

Error when loading itunes C:\Program Files\CommonFiles\Apple\Internet Services\mmcs.dll. Verify that you have access to that directory.
Only options I get are retry or cancel and on clicking retry the same box returns immediately... Help!

Welcome to the Apple Community.
Try the following steps, check whether things are working after each step where appropriate, before trying the next.
Restart the Apple TV (Settings > General > Restart).
Restart the Apple TV by removing ALL the cables for 30 seconds.
Restart your router.
Reset the Apple TV (Settings > General > Reset > Reset all settings)
Restore the Apple TV (Settings > General > Reset > Restore)

Error 501 when loading iTunes Store in iTunes AUTOFIXED

When i click the iTunes Store button in the right corner it says that there was an error when loading iTunes Store, and mention into brackets that it's the Error 501.i'm using a macbook pro 13.3 i7 with mountain lion.
Thanks.
AUTOFIXED
i just close the iTunes app and open it again. Then the iTunes Store will work.

When i click the iTunes Store button in the right corner it says that there was an error when loading iTunes Store, and mention into brackets that it's the Error 501.i'm using a macbook pro 13.3 i7 with mountain lion.
Thanks.
AUTOFIXED
i just close the iTunes app and open it again. Then the iTunes Store will work.

Error -2096 when loading iTune 7.6 and 7.6.1 or Quicktime

I am running Windows Server 2003 (32-bit) and until version 7.6 my itunes and quicktime were working fine. As of 7.6 and 7.6.1, I'm getting this error when running itunes or quicktime. Neither itunes nor quicktime are running in compatibility mode. If I uninstall 7.6/7.6.1 and install the previous version, everything works. Unfortunately, I can't use the advanced cart feature I need unless I upgrade to 7.6+.

I should mention that some people have resorted to downgrading their Quicktime to the previous version.
You have to uninstall Quicktime first. You can get 7.3 here:
http://www.apple.com/support/downloads/quicktime731forwindows.html
Or 7.2
http://www.apple.com/support/downloads/quicktime72forwindows.html

ORA-00054 error when loading Oracle table using Data Services

Hello,
we are facing ORA-00054 error when loading Oracle table using BO Data services
(Oracle 10g database, BODS Xi 3.2 SP3)
Test Job performs
1- truncate table
2- load table (tested in standard and bulk load modes)
Scenario when issue happens is:
1- Run loading Job
2- Job end in error for any Oracle data base error
3- When re-running the same Job, Job fails with following error
ORA-00054: resource busy and acquire with NOWAIT specified
It seems after first failure, Oracle session for loading the table stays active and locks the table.
To be able to rerun the Job, we are forced need to kill Oracle session manually to be able to run the Job again.
Expected behaviour would be : on error rollback modifications made on table and BODS stops Oracle session in a clean way.
Can somebody tell me / or point me to any BODS best practice about Oracle error handling to prevent such case?
Thanks in advance
Paul-Marie

the ora-0054 can occure depending how the job failed before. If this occures you will need the DBA to release the lock on the table in question
Or
AL_Engine.exe on The server it creates the Lock. Need to Kill Them. Or stop it..
This Problem Occurs when we select The Bulkloading Option in orclae We also faced the same issue,Our admin has Killed the session. Then everything alright.

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

System services error when downloading itunes

I received an error when updating iTunes. I uninstalled it.
When downloading iTunes from the website, I get as far as System Services and I receive an error.
Retry and Ignore do not work.

Thanks for posting the link. That worked for me just fine. I had previously uninstalled & reinstalled Itunes but that didn't work because I was not removing all the folders associated with it. Have a great week!

Error when loading XSLT mapping of the application

Hi,
I am using XSLT mapping in XI.
It is working ok when I test it in Interface Mapping but it gives below error when I test end to end scenario.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TRANSFORMER_CONF_EX</SAP:Code>
<SAP:P1>com/cba/***.xsl</SAP:P1>
<SAP:P2>urn:**:**</SAP:P2>
<SAP:P3>450326d0-1559-11dd-99a1-d89c0a0a380b</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when loading XSLT mapping of the application</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Yes, I have activated it
Regards,
Anirudh.

hi
please assure that if you save your xslt stylesheet locally, that it is saved in UTF-8 format, before you import it.
Pls do export the imported archive as a zip file to your local disk and try opening the same. If its not then the zip file which you have uploaded might have got corrupted/is not fully uploaded.
Try activating the imported archive and do a check before you do that. This you can do with a minor change in the description or so.
reward points if found helpfull
regards
chandra.k

Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?

Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling

Error when loading data in Infopackage

Hi Friends,
I'm getting the following error when loading please help it is quite urgent.
Value 'ZSATX #1 ' (hex. '436F6E7461696E6572202331 ') of characteristic ZSIGNI contains invalid characte BRAIN
Thnaks ,

Hi Smily,
It refers to an invalid char found in this InfoObject value. Does your system have anything maintained in RSKC?
For good info you can refer to Eugene's blogs:
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
Hope this helps...

Error when loading lower case

Hi Friends,
I getting an error when loading the Infopackage ,
"Value 'sss ' (hex. '737373 ') of characteristic Zapple contains invalid characters"
I used the formula "To upper" in my T/R still I was getting the same error" and also I edited the value in PSA to "SSS" and loaded and still pointing to the same error. when I do a find for "sss" I dont see any value in PSA.
Please advice, it will be really appreciated,
thanks alot in advance

Hi,
U cont see the special characters in display mode in PSA...
for that First the check the reason for error,
it is from PSA, and the status in the monitor turned to red with errors or collection eneded with source system.. then go to manage of data target delete the red request... now go to PSA in modelling then select ur infosource right click select the option edit PSA data..
Now u can see the some special characteristics in the record that error occured... once it is complete then save come back to PSA screen then once again right click on the Infosource select immeadiate update.. it will work fine..
Siddhu

Error -5000 and: Error when loading the transcode setting

For a couple of days I've been trying to export my project on a DVD, but on the half way of the transcoding it comes the Error -5000, and then there is such a message, something about the navigation, can't be found etc... I work on a mac OS X, using Encore CS3, all my data I've got on my external harddisk, with space of 80 GB.
Besides, when I'm trying to export my project on a blu-ray disc, there comes a message: Error when loading the transcode setting! I know that there are only two codecs there - H.264 and MPEG-2, and there are only MPEG-2 movie files there, so I set the MPEG-2 codec. And there comes such a thing! Having set the H.264, there comes the same. What can it be?
And the last one is the copy protection. I know that it can be activated, with CGMS and Macrovision, only if the CSS option is set on "permit no copies". So I do, and then there comes a message - "for these settings there is no copy protection provided". So what now to do?

My flash drive PNY comes up with error -5000 and i do not know what to do can you help me with this problems

Error when loading Itunes

Similar Messages

Maybe you are looking for