Error when loading the data from PSA to ODS......
Hi BW guru's,
i am facing one problem while loading the data from PSA to ODS.so please help me in this regard.
Please give a step by step guidelines for me...
the error while loading the data from PSA to ODS is "There are no PSA tables for these selection criteria","An error occurred when reading PSA data".
thanks in advance,
ashok.
hi ashok,
u can push data from psa to ods, for this goto the psa in rsa1>psa>goto that request>rightclick>select " schedule update Immediately ", then data will moved from psa to ods.
or
In ods > delete the failed request>goto the processing tab-->select 3rd option " psa and then subsequentially to data targets ", --> schedule the infopackage.
bye
sunil
Similar Messages
-
Error while loading the data from PSA to Data Target
Hi to all,
I'm spacing some error while loading the data to data target.
Error : Record 1 :Value 'Kuldeep Puri Milan Joshi ' (hex. '004B0075006C0064006500650070002000500075007200690
Details:
Requests (messages): Everything OK
Extraction (messages): Everything OK
Transfer (IDocs and TRFC): Errors occurred
Request IDoc : Application document posted
Info IDoc 2 : Application document posted
Info IDoc 1 : Application document posted
Info IDoc 4 : Application document posted
Info IDoc 3 : Application document posted
Data Package 1 : arrived in BW ; Processing : Data records for package 1 selected in PSA - 1 er
Processing (data packet): Errors occurred
Update PSA ( 2462 Records posted ) : No errors
Transfer Rules ( 2462 -> 2462 Records ) : No errors
Update rules ( 2462 -> 2462 Records ) : No errors
Update ( 0 new / 0 changed ) : Errors occurred
Processing end : Errors occurred
I'm totally new to this issue. please help to solve this error.
Regards,
SaranHi,
I think you are facing an invalid character issue.
This issue can be resolved by correcting the error records in PSA and updating it into the target. For that the first step should be to identify if all the records are there in PSA. You can find out this from checking the Details tab in RSMO, Job log , PSA > sorting records based on status,etc. Once its confirmed force the request to red and delete the particular request from the target cube. Then go to PSA and edit the incorrect records (correcting or blanking out the invalid entries for particular field InfoObject for the incorrect record) and save it. Once all the incorrect records are edited go to RSA1>PSA find the particular request and update to target manually (right click on PSA request > Start update immediately).
I will add the step by step procedure to edit PSA data and update into target (request based).
In your case the error message says Error : Record 1 :Value 'Kuldeep Puri Milan Joshi '. You just need to conver this to Capital letter in PSA and reload.
Edit the field to KULDEEP PURI MILAN JOSHI in PSA and push it to target.
Identifying incorrect records.
System wont show all the incorrect records at the first time itself. You need to search the PSA table manually to find all the incorrect records.
1. First see RSMO > Details > Expand upate rules / processing tabs and you will find some of the error records.
2. Then you can go to PSA and filter using the status of records. Filter all the red requests. This may also wont show the entire incorrect records.
3. Then you can go to PSA and filter using the incorrect records based on the particular field.
4. If this also doesnt work out go to PSA and sort (not filter) the records based on the particular field with incorrect values and it will show all the records. Note down the record numbers and then edit them one by one.
If you want to confirm find the PSA table and search manually."
Also Run the report RS_ERRORLOG_EXAMPLE,By this report you can display all incorrected records of the data & you can also find whether the error occured in PSA or in TRANSFER RULES.
Steps to resolve this
1. Force the request to red in RSMO > Status tab.
2. Delete the request from target.
3. Come to RSMO > top right you can see PSA maintenace button > click and go to PSA .
4.Edit the record
5. Save PSA data.
6. Got to RSA15 > Search by request name > Right click > update the request from PSA to target.
Refer how to Modify PSA Data
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40890eda-1b99-2a10-2d8b-a18b9108fc38
This should solve your problem for now.
As a long term you can apply some user exit in source system side or change your update rules to ensure that this field is getting blanked out before getting loaded in cube or add that particular char to permitted character list in BW.
RSKC --> type ALL_CAPITAL --> F8 (Execute)
OR
Go to SE38 and execute the program RSKC_ALLOWED_CHAR_MAINTAIN and give ALL_CAPITAL or the char you want to add.
Check the table RSALLOWEDCHAR. It should contain ALL_CAPITAL or the char you have entered.
Refer
/people/sap.user72/blog/2006/07/23/invalid-characters-in-sap-bw-3x-myths-and-reality-part-2
/people/sap.user72/blog/2006/07/08/invalid-characters-in-sap-bw-3x-myths-and-reality-part-1
/people/aaron.wang3/blog/2007/09/03/steps-of-including-one-special-characters-into-permitted-ones-in-bi
http://help.sap.com/saphelp_nw04/helpdata/en/64/e90da7a60f11d2a97100a0c9449261/frameset.htm
For adding Other characters
OSS note #173241 Allowed characters in the BW System
Thanks,
JituK
Edited by: Jitu Krishna on Mar 22, 2008 1:52 PM -
Unable to load the data from PSA to INFOCUBE
Hi BI Experts, good afternoon.
I am loading 3 years data( Full load ) from R/3 to Infocube.
So loaded the data by monthwise. So i created 36 info packages.
Everything is fine. But i got a error in Jan 2005 and Mar 2005. It is the same error in both months. That is Caller 01and caller 02 errors( Means invalid characteristics are there PSA data )
So i deleted both PSA and Data target Requests and again i loaded the data only to PSA.
Here i got data in PSA without fail.
Then i tried to load the data from PSA to Infocube MANUALLY.
But its not happening.
One message came this
SID 60,758 is smaller than the compress SID of cube ZIC_C03; no request booking.
Please give me the solution how to solve this problem.
Thanks & Regards
AnjaliHi Teja,
Thanks for the good response.
How can i check whether it is already compressed or not?
Pls give me the reply.
Thanks
Anjali -
Error when updating the data from DSO to cube
Hi,
I am getting the error when uploading the data from the ods to cube.
The following is the error message.
Unable to determine period for date 20090101, fiscal year variant Z2: Error #
How can i solve this issue.
Regards
AnnieHi ,
fiscal year variant, go into Customizing for Financial Accounting (FI) under Financial Accounting Global Settings >>>Fiscal Year >>>Maintain Fiscal Year Variant.
check this link ..
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/frameset.htm
http://help.sap.com/saphelp_scm41/helpdata/en/50/0d89f2ad919c40b95b9ae7583c8c96/content.htm
Regards,
shikha -
Error while loading the data from excel to database.
Hi,
I am using PL/SQL developer to load the data from excel to database. I will set the data source in the control panel and will proceed through ODBC importer in pl/sql developer to import the data.
What exactly the error is when i click the filename to view the result preview it shows an error as:
The field is too small to accept the amount of data you attempted to add. Try inserting or pasting less data.
Kindly help with solution.
Thanks/Regards
Sakthivarman J.Hello;
That error message comes from Microsoft, so something in you Excel sheet is the cause.
Its a pain but I would check properties of each column in case Excel decided to add something, a comma for example.
Do you have a column over 255 characters? Look there first. If any length is greater than 255 it will crash and burn.
Or convert it to a CSV and create an external table.
Best Regards
mseberg
Might also throw an 3163 as an error where you cannot see it.
Edited by: mseberg on Sep 9, 2011 7:34 AM -
Error in loading the data from flatfile
Hello All,
when am loading the data from flat file iam getting error "ERROR4 WHEN LOADING THE EXTERNAL DATA" is it because of mapping in the transferrules or error in the flat file.
Points will be assigned to all helpful answer.
Thanks & Regards
PriyaHii Priya,
The reasons may be the file is open, the format/flatfile structure is not correct, the mapping/transfer structure may not be correct, presence of invalid characters/data inconsistency in the file, etc.
Check if the flatfile in .CSV format.
You have to save it in .CSV format for the flatfile loading to work.
Also check the connection issues between source system and BW or sometimes may be due to inactive update rules.
Refer
error 1
Find out the actual reason and let us know.
Hope this helps.
Regards,
Raghu. -
When Loading the data from a french Language
Hi all
First let me Wish u Happy Friendshipday
When iam loading the data from a french system. Do i need to have a french key board.
And wht measures should i take to load a load when it is not in english language..Hi
You dont need a french keyboard!
Just make sure that the french language is installed in your BW system
TO check this go to transaction RZ10 and select a defined parameter.
In it, see if apart from English and German, if french is also checked. Installation of language is job of basis guys and check with them too
Hope this helps
Prakash
Assigning points is a way of saying thanks on SDN -
Error while loading the data from text file
Hi,
I got an error " Data Value Encountered before all Dimensions selected" while loading the data from the text file.
Can any one please suggest me the solution.Possible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved? -
Error while loading the data from ODS to InfoCube
hai
Im trying to load the data from ODS to InfoCube for particular year .
But it says that there is a source system problem .
why it is like that .
pls tell me
i ll assing the points
rizwanHi Rizwan,
you didn't mention the error message in details. there could be a few places to be checked:
- check if BW itself source system is active and in tact and reactivate if necessary
- check if update rule is active and reactivate if necessary
- check if ODS is active and reactivate if necessary
Regards,
Lilly -
Error While loading the data into PSA
Hi Experts,
I have already loaded the data into my cube. But it doesn't have values for some fields. So again i modified the data in the flat file and tried to load them into PSA. But while starting the Info Package, I got an error saying that,
"Check Load from InfoSource
Created YOKYY on 20.02.2008 12:44:33
Check Load from InfoSource , Packet IP_DS_C11
Please execute the mail for additional information.
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Pls help me in this......
With Regards,
Yokesh.Hi,
After editing the file did you save the file and close it.
This error may come if your file was open at the time of request.
Also did you check the file path settings.
If everything is correct try saving the infopackage once and loading again.
Thanks,
JituK -
SQL Interface - Error in Loading the data from SQL data source
Hello,
We have been using SQl data source for loading the dimensions and the data for so many years. Even using Essbase 11.1.1.0, it's been quite a while (more than one year). For the past few days,we are getting the below error when trying to load the data.
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Info(1021013)
ODBC Layer Error: [S1000] ==> [[DataDirect][ODBC DB2 Wire Protocol driver][UDB DB2 for Windows, UNIX, and Linux]CURSOR IDENTIFIED IN FETCH OR CLOSE STATEMENT
IS NOT OPEN (DIAG INFO: ).]
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Info(1021014)
ODBC Layer Error: Native Error code [4294966795]
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Error(1021001)
Failed to Establish Connection With SQL Database Server. See log for more information
[Mon Jan 10 11:02:56 2011]Local/{App Name}/{DB Name}/{User Id}/Error(1003050)
Data Load Transaction Aborted With Error [7]
[Mon Jan 10 11:02:56 2011]Local/{App Name}///Info(1013214)
Clear Active on User [Olapadm] Instance [1]
Interestingly, after the job fails thru our batch scheduler environment, when I run the same script that's being used in the batch scheduler, the job completes successfully.
Also, this is first time, I saw this kind of error message.
Appreciate any help or any suggestions to find a resolution. Thanks,Hii Priya,
The reasons may be the file is open, the format/flatfile structure is not correct, the mapping/transfer structure may not be correct, presence of invalid characters/data inconsistency in the file, etc.
Check if the flatfile in .CSV format.
You have to save it in .CSV format for the flatfile loading to work.
Also check the connection issues between source system and BW or sometimes may be due to inactive update rules.
Refer
error 1
Find out the actual reason and let us know.
Hope this helps.
Regards,
Raghu. -
DTP Error when loading Master data from DSO to InfoProvider
Hi Experts,
My DTP is failing when I am running a DELTA load from DSO to the InfoProvider. The errors are either duplicate records or overlap of Dates etc.
Thanks,
SB.Hi Gopal,
Here is the info on error message.
" There are duplicates of the data record 1 & with the key '00000000038 &' for characteristic EPROPERTY &. "
Hope this helps in understand the DTP error.
Thanks,
SB. -
Error while load the data from CSV with CTL file..?
Hi TOM,
When i try to load data from CSV file to this table,
CTL File content:
load data
into table XXXX append
Y_aca position char (3),
x_date position date 'yyyy/mm/dd'
NULLIF (x_date = ' '),
X_aca position (* + 3) char (6)
"case when :Y_aca = 'ABCDDD' and :XM_dt is null then
decode(:X_aca,'AB','BA','CD',
'DC','EF','FE','GH','HG',:X_aca)
else :X_aca
end as X_aca",
Z_cdd position char (2),
XM_dt position date 'yyyy/mm/dd'
NULLIF XM_dt = ' ',
When I try the above CTL file; geting the following error..
SQL*Loader-281: Warning: ROWS parameter ignored in parallel mode.
SQL*Loader-951: Error calling once/load initialization
ORA-02373: Error parsing insert statement for table "XYZ"."XXXX".
ORA-00917: missing commaPossible Solutions
Make sure that the data source is valid.
Is a member from each dimension specified correctly in the data source or rules file?
Is the numeric data field at the end of the record? If not, move the numeric data field in the data source or move the numeric data field in the rules file.
Are all members that might contain numbers (such as "100") enclosed in quotation marks in the data source?
If you are using a header, is the header set up correctly? Remember that you can add missing dimension names to the header.
Does the data source contain extra spaces or tabs?
Has the updated outline been saved? -
Error when loading the Reports from the IC Manager
Dear CRM Gurus,
i am getting the below error message when trying to access the Reports from the IC_MANAGER role
'Error loading template 0TPLI_CSRV_T01_Q0001_V01'
and
Technical Information for Message:
(Error loading template 0TPLI_CSRV_T01_Q0001_V01
Notification Number BRAIN 276 )
i am completely stuck here
can anyone help
Thanks and Regards,
RajThe reports are coming from BI, so do you have a BI enviromment with the extractors from CRM pulling the data ........
-
Nu such object error when load the user from application
Hi..everybody
I'm new comer at Sun ONEDirectory Server
I've a problem when try to get the user from my application
I use ..getAttribute("cn=username");
always appear No Such Object, whereas I've created that user
ThanksHi,
The best way would be to first run an ldapsearch command on the directory server to check whether the user is present and then try to check it with your application.
You can use something like:
#ldapsearch -D "cn=Directory Manager" -w <password> -b "cn=username,o=users, dc=example,dc=com" "objectclass=*"
Cheers,
Maybe you are looking for
-
RAM not showing up in Profiler
I recently bought a Crucial 512MB PC32000 DDR400 (part no. CT6464Z40B) to be paired with another RAM module from another vendor to put into my Dual 1.8Ghz G5. These two sticks appear to be identical in my daughter's iMac. Profiler says: 512MB PC3200U
-
Question about xmonad package in the repos.
When I sudo pacman -S xmonad it installs xmonad and ghc goodness. But one thing that has always bothered me is that I had to hunt down a default .xmonad/xmonad.hs config file for xmonad. Can anyone explain why the package doesn't come with a default
-
Lumia 520 music player gets stopped with headphone...
Hi folks I have a problem with my nokia lumia 520. When I am playing music with my headphones the music gets paused. It has been happening for the last week. It works fine on speakers but not with headphones. I have tried several headphones, did a so
-
Image won't print at the designated size
I have the following: CS4 (brand new) Windows 7 (64 bit) New HP office jet 8500 wireless Problem: I complete an image. Image size is set to 8.5 x 11. Print preview shows image filling paper. Image is set to print at 100%. When I press
-
I have purchased TRANSLATE SMS and it does not translate. I have done all the trouble shooting that apple advise and still nothing. Has any one got any suggestions?