Error when logical standby database

Hii all,
First time i am creating logical standby database on oracle 10gR2 by oracle doc.
but When i try to create logical standby database it give error
DG 2011-07-11-09:44:24 0 2 755997031 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16797
DG 2011-07-11-09:44:24 0 2 755997031 Operation CTL_GET_STATUS cancelled during phase 2, error = ORA-16797
DG 2011-07-11-09:45:24 0 2 0 RSM0: HEALTH CHECK ERROR: ORA-16797: database is not using a server parameter file.
when i try to create spfile from pfile it give error.
ORA-01078 failure in processing initialization parameters.
LRM-00123 invalid character number found in the input file.
Please help
Vaibhav Dixit.

Vaibhav Dixit wrote:
stan.__db_cache_size=432013312
stan.__java_pool_size=4194304
stan.__large_pool_size=8388608
stan.__shared_pool_size=163577856
stan.__streams_pool_size=0
*.audit_file_dest='D:\oracle\product\10.2.0/admin/stan/adump'
*.background_dump_dest='D:\oracle\product\10.2.0/admin/stan/bdump'
*.compatible='10.2.0.1.0'
*.control_files='D:\oracle\product\10.2.0/oradata/stan/stan05.ctl'
*.core_dump_dest='D:\oracle\product\10.2.0/admin/stan/cdump'
*.db_block_size=8192
*.db_domain=''
*.db_file_multiblock_read_count=16
*.db_name='stan'
*.DB_UNIQUE_NAME='stan'
*.LOG_ARCHIVE_CONFIG='DG_CONFIG=(prim,stan)'
*.DB_FILE_NAME_CONVERT='D:\oracle\product\10.2.0\oradata\prim\','D:\oracle\product\10.2.0\oradata\stan\'
*.LOG_FILE_NAME_CONVERT= ’D:\oracle\product\10.2.0\oradata\prim\’,’D:\oracle\product\10.2.0\oradata\stan\’,'D:\oracle\product\10.2.0\flash_recovery_area\prim\ONLINELOG','D:\oracle\product\10.2.0\flash_recovery_area\stan\ONLINELOG'
*.LOG_ARCHIVE_FORMAT='%t_%s_%r.arc'
*.LOG_ARCHIVE_DEST_1= 'LOCATION=D:\oracle\product\10.2.0\flash_recovery_area\stan\ VALID_FOR=(ONLINE_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=stan'
*.LOG_ARCHIVE_DEST_2= 'SERVICE=prim LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=prim'
*.LOG_ARCHIVE_DEST_3= 'LOCATION=D:\oracle\product\10.2.0\flash_recovery_area\STAN2\ VALID_FOR=(STANDBY_LOGFILES,STANDBY_ROLE) DB_UNIQUE_NAME=stan'
*.LOG_ARCHIVE_DEST_STATE_1='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_2='ENABLE'
*.LOG_ARCHIVE_DEST_STATE_3='ENABLE'
*.REMOTE_LOGIN_PASSWORDFILE='EXCLUSIVE'
*.LOG_ARCHIVE_MAX_PROCESSES=30
*.STANDBY_FILE_MANAGEMENT='AUTO'
*.FAL_SERVER='prim'
*.FAL_CLIENT='stan'
*.db_recovery_file_dest_size=9390363648
*.dispatchers='(protocol=TCP)'
*.job_queue_processes=10
*.nls_territory='INDIA'
*.open_cursors=300
*.pga_aggregate_target=202375168
*.processes=150
*.sga_target=609222656
*.shared_servers=1
*.undo_management='AUTO'
*.undo_tablespace='UNDOTBS1'
*.user_dump_dest='D:\oracle\product\10.2.0/admin/stan/udump'
*.undo_retention=3600
*.dg_broker_start='TRUE'from
'D:\oracle\product\10.2.0/admin/stan/udump'
please change or replace the forward slash with backward slash in all file locations
to
eg:- 'D:\oracle\product\10.2.0\admin\stan\udump'
and create a spfile from pfile.

Similar Messages

Database Guard enabled error in Logical standby database

Hi All,
In my logical standby db i have a schema REP which is not present in Primary database, but even then i am getting ora-16224 Database Guard enabled error when ever i try DDL and DML operation on REP schema objects in Logical standby db.
even when i compile sys object i am getting the same error. when i set database data guard status to NONE, i don't get error, but my requirement is to keep database data guard status in STANDBY
My database version is 11.2.0.3.0.
Please help in resolving this error.
Thanks,
Mukesh

>In my logical standby db i have a schema REP which is not present in Primary database,
not possible

Steps to rollback when Logical Standby Database creation fails

Hi,
In case while creating a logical standby database it fails. What steps should be done on primary to rollback the earlier steps. Because while creating logical standby we do certain tasks on primary e.g.
1) create supplemental logging.
2) update init file.
Regards,
Tushar

Hi,
Thanks for the mail. Should I drop the supplemental logging using
"Alter database DROP Supplemental Log data;".
or if we need to disable, how can we do so?
Rest is ok. Anyways I would not be using force logging.
Droping of additional tablespace created to keep logminer tables on primary.
Removing of log_archive_dest_2 information from primary init.
I think the above should do.
Regards,
Tushar

Archive log shipping error in Logical standby database

Hi,
We have Primay and logical database configuration both in RAC in Production. both database are in 10.2.0.4.
Everyday we having issue of some archivelog not transfered to logical server around 2AM. I am having good exposure in Logical/Log minor/Goldgendate and can say fal server/client server configuration is correct.
Can you guys please give some input of what can cause this.
Yes we take RMAN backup of both database around 1:30 using control file instead of recovery catalog and I doubt this put lock on control file and cause this issue.
I would be glad of you could help me out in this.
Thanks a lot!
Pradeep
Below is the configuration of archive/fal on both database.
PIP1REP2 is logical database(instance 2) where apply process is running/configured.
Primary server configuration on (PIP11) (same are on other instances).
SQL> sho parameter fal
NAME TYPE VALUE
fal_client string PIP1REP2
fal_server string PIP11
SQL> sho parameter archive
NAME TYPE VALUE
log_archive_dest_1 string LOCATION=+ARCH01
log_archive_dest_2 string SERVICE=pip1rep2 lgwr async
log_archive_dest_state_1 string enable
log_archive_dest_state_2 string ENABLE
llog_archive_local_first boolean TRUE
log_archive_max_processes integer 10
log_archive_min_succeed_dest integer 1
log_archive_start boolean FALSE
log_archive_trace integer 0
remote_archive_enable string true
Logical server configuration
SQL> sho parameter fal
NAME TYPE VALUE
fal_client string PIP1REP
fal_server string pip11, pip12, pip13, pip14, pi
p15
SQL> sho parameter archive
NAME TYPE VALUE
alog_archive_dest_1 string LOCATION=+ARCH01/PIP1REP valid
for=(onlinelogfiles, all_rol
es) db_unique_name=pip1rep
log_archive_dest_2 string LOCATION=+ARCH01/PIP1REP/ARCH_
DEST2_STANDBY_LOGS VALID_FOR=(
STANDBY_LOGFILES,STANDBY_ROLE)
db_unique_name=pip1rep
log_archive_dest_state_1 string enable
log_archive_dest_state_2 string enable
log_archive_local_first boolean TRUE
log_archive_max_processes integer 20
log_archive_min_succeed_dest integer 1
log_archive_trace integer 0
remote_archive_enable string true
standby_archive_dest string +ARCH01

Do you think creating recovery catalog will resolve it?
Yes, I do. (But I do not know for sure)
If it helps when I got to this part I decided to backup either the Primary or the Standby, but not both.
I decided Primary only and documented how to recreate my standby without downtime.
I hope this helps.
regards.

Creating a new schema in a Logical Standby Database

Hi All,
I am experimenting with logical standby databases for the purpose of reporting, and have not been able to create a new schema in the logical standby database - one of the key features of logical standbys.
I have setup primary and logical standby databases, and they seem to be running just fine - changes are moved from the primary to the standby and queries on the standby seem to run ok.
However, If I try to create a new schema on the logical standby, that does not exist on the primary, I get "ORA-01031: insufficient privileges" errors when I try to create new objects.
Show below are the steps I have taken to create the new schema on the logical standby. Any help would be greatly appreciated.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_new
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user new
2 identified by new
3 default tablespace ts_new
4 temporary tablespace temp
5 quota unlimited on ts_new
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to new
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to new
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to new
SYS@UATDR> select * from dba_sys_privs where grantee='NEW'
2 /
GRANTEE PRIVILEGE ADM
NEW CREATE ANY TABLE NO
NEW CREATE TABLE NO
NEW UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect new/new
Connected.
NEW@UATDR>
NEW@UATDR> -- prove ability to create tables
NEW@UATDR> create table new
2 (col1 number not null)
3 tablespace ts_new
4 /
create table new
ERROR at line 1:
ORA-01031: insufficient privileges
NEW@UATDR>
NEW@UATDR>

HI Daniel,
I appreciate your quick response.
My choice of name may not have been ideal, however changing new to another name - like gav - does not solve the problem.
SYS@UATDR> connect / as sysdba
Connected.
SYS@UATDR>
SYS@UATDR> select name, log_mode, database_role, guard_status, force_logging, flashback_on, db_unique_name
2 from v$database
3 /
NAME LOG_MODE DATABASE_ROLE GUARD_S FOR FLASHBACK_ON DB_UNIQUE_NAME
UATDR ARCHIVELOG LOGICAL STANDBY ALL YES YES UATDR
SYS@UATDR>
SYS@UATDR> create tablespace ts_gav
2 /
Tablespace created.
SYS@UATDR>
SYS@UATDR> create user gav
2 identified by gav
3 default tablespace ts_gav
4 temporary tablespace temp
5 quota unlimited on ts_gav
6 /
User created.
SYS@UATDR>
SYS@UATDR> grant connect, resource to gav
2 /
Grant succeeded.
SYS@UATDR> grant unlimited tablespace, create table, create any table to gav
2 /
Grant succeeded.
SYS@UATDR>
SYS@UATDR> -- show privs given to gav
SYS@UATDR> select * from dba_sys_privs where grantee='GAV'
2 /
GRANTEE PRIVILEGE ADM
GAV CREATE TABLE NO
GAV CREATE ANY TABLE NO
GAV UNLIMITED TABLESPACE NO
SYS@UATDR>
SYS@UATDR> -- create objects in schema
SYS@UATDR> connect gav/gav
Connected.
GAV@UATDR>
GAV@UATDR> -- prove ability to create tables
GAV@UATDR> create table gav
2 (col1 number not null)
3 tablespace ts_gav
4 /
create table gav
ERROR at line 1:
ORA-01031: insufficient privileges
GAV@UATDR>

MV Logs not getting purged in a Logical Standby Database

We are trying to replicate a few tables in a logical standby database to another database. Both the source ( The Logical Standby) and the target database are in Oracle 11g R1.
The materialized views are refreshed using FAST REFRESH.
The Materialized View Logs created on the source ( the Logical Standby Database) are not getting purged when the MV in the target database is refreshed.
We checked the entries in the following Tables: SYS.SNAP$, SYS.SLOG$, SYS.MLOG$
When a materialized view is created on the target database, a record is not inserted into the SYS.SLOG$ table and it seems like that's why the MV Logs are not getting purged.
Why are we using a Logical Standby Database instead of the Primary ? Because, the load on the Primary Database is too much and the machine doesn't have enough resources to support MV based replication. The CPU usage is 95% all the time. The appplication owner won't allow us to go against the Primary database.
Do we have to do anything different in terms of Configuration/Privileges etc. because we are using a Logical Standby Database as a source ?
Thanks in Advance.

We have a 11g RAC database in solaris OS where there is huge gap in archive log apply.
Thread Last Sequence Received Last Sequence Applied Difference
1 132581 129916 2665
2 108253 106229 2024
3 107452 104975 2477
The MRP0 process seems not to be working also.Almost 7000+ archives lag in standby if compared with primary database.
i suggest you to go with Incremental rollforward backups to make it SYNC, use this below link for step by step procedure.
http://www.oracle-ckpt.com/rman-incremental-backups-to-roll-forward-a-physical-standby-database-2/
Here questions.
1) Whether those archives are transported & just not applied?
2) Is in production do you have archives or backup of archives?
3) What you have found errors in alert log file?
post
SQL> select severity,message,error_code,timestamp from v$dataguard_status where dest_id=2;
4) What errors in primary database alert log file?
Also post
select     ds.dest_id id
,     ad.status
,     ds.database_mode db_mode
,     ad.archiver type
,     ds.recovery_mode
,     ds.protection_mode
,     ds.standby_logfile_count "SRLs"
,     ds.standby_logfile_active active
,     ds.archived_seq#
from     v$archive_dest_status     ds
,     v$archive_dest          ad
where     ds.dest_id = ad.dest_id
and     ad.status != 'INACTIVE'
order by
     ds.dest_id
/Also check errors from standby database.

Problem while mining archivelog in Logical Standby Database

I have configure Data Guard with one Primary database, one physical standby and one logical standby database; redo are applied correcly on the physical standby database but on the logical standby database when logminer begin mining logfile it encounter this errors :
ORA-00600 internal error code, arguments : [kpotcgah-7],[64],[X4],[],[],[],[],[]
ORA-12801 error signaled in parallel query server P003
ORA-07445
ORA-12805 parallel query server died unexpectedly

Unfortunately ORA-00600 errors are beyond the scope ot this forum, as they require tools and source code available only at Oracle Support. The only directions you most probably will get here is to issue a Service Request. Oracle support will, among other things, ask you if you are at the latest available patch for your platform.
Good luck.

Creating new tables in Logical Standby database

Hi
I have a requirement to create new tables in logical standby database. These tables will not be present on primary database. Is it possible to do this ?
I have a new schema already created which has the privilege to CREATE new table.
I have stopped the logical standby apply.
When I am now trying to create a new table but it is failing with error : insufficient privileges.
When I am trying to run below statement on new schema it is also failing with error of insufficient privileges.
alter session disable dataguard;
Please help.

user8819121 wrote:
Thanks Mahir,
I was able to create the table after logging in as sysdba.
But I need my user on that table to execute DML statements. My user has privileges to insert,delete and update any table.
I tried the following statements to disable the guard but it is sill not working
ALTER DATABASE GUARD STANDBY.
Do I need to skip the tables created using dbms_logstdby package to not making it part of SQL Apply ? I guess not since the table is not in primary database.
Amit
You can skip only on primary, your created schema on Standby is not in primary.
Then you must change Status of data guard to NONE. NONE is means is not any security on your data.
In Guard status NONE can change all schema data.
Please check link: http://docs.oracle.com/cd/E11882_01/server.112/e10700/manage_ls.htm#CHDGFGHG
Following tests on user created before guard status is change from ALL to STANDBY.
C:\Users\Administrator>sqlplus / as sysdba
SQL> conn test/test
Connected.
SQL> select table_name from user_tables;
TABLE_NAME
T
SQL> insert into t values(22);
insert into t values(22)
ERROR at line 1:
ORA-16224: Database Guard is enabled
SQL> conn / as sysdba
Connected.
SQL> select guard_Status from v$database;
GUARD_S
ALL
SQL> alter database guard standby;
Database altered.
SQL> conn test/test
Connected.
SQL> insert into t values(1);
insert into t values(1)
ERROR at line 1:
ORA-16224: Database Guard is enabled
SQL> conn / as sysdba
Connected.
SQL> select guard_Status from v$database;
GUARD_S
STANDBY
SQL> alter database guard none;
Database altered.
SQL> select guard_Status from v$database;
GUARD_S
NONE
SQL> conn test/test
Connected.
SQL> insert into t values(1);
1 row created.
SQL> commit;
Commit complete.And Now I want share with you new tests :)
Now user creating when after guard status change
SQL> drop user test cascade;
User dropped.
SQL> select guard_status from v$database;
GUARD_S
STANDBY
SQL> create user test identified by test;
User created.
SQL> grant create session, resource, create table to test;
Grant succeeded.
SQL> conn test/test
Connected.
SQL> create table t (n number);
Table created.
SQL> insert into t values(1);
1 row created.
SQL> commit;
Commit complete.
SQL>It means when guard status is ALL then all of user created guarding.
When you changed status to STANDBY then Logical Standby guard only primary schema and created schema before change.
NONE is not guard any schema. it means you can delete standby schema data too.
Regards
Mahir M. Quluzade
Edited by: Mahir M. Quluzade on Apr 19, 2013 4:07 PM

Add Datafile in Logical Standby Database

Hi,
I have add one datafile in our primary RAC DB. We had logical standby database with file management is equal to manual. Both the primary RAC and logical standby db have the different storage structure. When the archive applied on the logical standby database its throws the error " error in creating datafile 'path'";
Would appreciate if come to know the steps to add the datafile in this kind of environment. and how can i overcome from this problem now except skip transaction for that ddl.
Thanks in advance.
Dewan

When the archive applied on the logical standby database its throws the error " error in creating datafile 'path'";Can you post the error message with the number.
From Manual..
8.3.1.2 Adding a Tablespace and a Datafile When STANDBY_FILE_MANAGEMENT Is Set to MANUAL
The following example shows the steps required to add a new datafile to the primary and standby database when the STANDBY_FILE_MANAGEMENT initialization parameter is set to MANUAL. You must set the STANDBY_FILE_MANAGEMENT initialization parameter to MANUAL when the standby datafiles reside on raw devices.
Add a new tablespace to the primary database:
SQL> CREATE TABLESPACE new_ts DATAFILE '/disk1/oracle/oradata/payroll/t_db2.dbf'
2> SIZE 1m AUTOEXTEND ON MAXSIZE UNLIMITED;
Verify the new datafile was added to the primary database:
SQL> SELECT NAME FROM V$DATAFILE;
NAME
/disk1/oracle/oradata/payroll/t_db1.dbf
/disk1/oracle/oradata/payroll/t_db2.dbf
Perform the following steps to copy the tablespace to a remote standby location:
Place the new tablespace offline:
SQL> ALTER TABLESPACE new_ts OFFLINE;
Copy the new tablespace to a local temporary location using an operating system utility copy command. Copying the files to a temporary location will reduce the amount of time the tablespace must remain offline. The following example copies the tablespace using the UNIX cp command:
% cp /disk1/oracle/oradata/payroll/t_db2.dbf
/disk1/oracle/oradata/payroll/s2t_db2.dbf
Place the new tablespace back online:
SQL> ALTER TABLESPACE new_ts ONLINE;
Copy the local copy of the tablespace to a remote standby location using an operating system utility command. The following example uses the UNIX rcp command:
%rcp /disk1/oracle/oradata/payroll/s2t_db2.dbf standby_location
Archive the current online redo log file on the primary database so it will get transmitted to the standby database:
SQL> ALTER SYSTEM ARCHIVE LOG CURRENT;
Use the following query to make sure that Redo Apply is running. If the MRP or MRP0 process is returned, Redo Apply is being performed.
SQL> SELECT PROCESS, STATUS FROM V$MANAGED_STANDBY;
Verify the datafile was added to the standby database after the archived redo log file was applied to the standby database:
SQL> SELECT NAME FROM V$DATAFILE;
NAME
/disk1/oracle/oradata/payroll/s2t_db1.dbf
/disk1/oracle/oradata/payroll/s2t_db2.dbf

RMAN script problem to create logical standby database !

Dear Friends ,
I am using Oracle10g database . I want to create a logical standby database . I create two database :
Primary : orcl
standby : orclsby1
Every steps I followed successfully , but when I am going to create "standby database" from "primary database" using rman then I found the following error :
The script is below which I have to run in Primary (orcl) database :
Script :
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'orcl','orclsby1'
set db_unique_name='orclsby1'
set db_file_name_convert='/orcl/','/orclsby1/'
set log_file_name_convert='/orcl/','/orclsby1/'
set control_files='/u01/app/oracle/oradata/orclsby1.ctl'
set log_archive_max_processes='5'
set fal_client='orclsby1'
set fal_server='orcl'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(orcl,orclsby1)'
set log_archive_dest_1='service=orcl ASYNC
valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orcl'
Problem which I got :
[oracle@localhost DG]$ rman target sys/sys123@orcl auxiliary sys/sys123@orclsby1
Recovery Manager: Release 10.2.0.1.0 - Production on Mon Oct 19 15:58:17 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database: ORCL (DBID=1227832857)
connected to auxiliary database: ORCLSBY1 (not mounted)
RMAN> @cr_phys_sby1.txt
RMAN> run {
2> allocate channel prmy1 type disk;
3> allocate channel prmy2 type disk;
4> allocate channel prmy3 type disk;
5> allocate channel prmy4 type disk;
6> allocate auxiliary channel stby type disk;
7> duplicate target database for standby from
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00558: error encountered while parsing input commands
RMAN-01009: syntax error: found "from": expecting one of: "dorecover, db_file_name_convert, nofilenamecheck, ;"
RMAN-01007: at line 7 column 39 file: cr_phys_sby1.txt
I try to edit the above script using 'nofilenamecheck' 'dorecover' etc. , but cannot resolve the problem . Would u plz help me .... where the problem is .
Both databases are running on Oracle10g platform .
Waiting for ur kind reply .. ...

You need to:
- create a SPFILE manually for standby database
- use the RMAN command: DUPLICATE TARGET DATABASE FOR STANDBY
- remove all SPFILE statements from RMAN script.

Logical standby database keeps displaying ORA-16768

I have a logical standby database setup on a remote host to accept cascaded logs from a physical standby. Everything was working fine until yesterday when I get the above error and log apply services stopped. When I go into Grid Control to Data Guard I see the error and it displays the failed SQL statement which is a create index statement. I have the option of clicking the SKIP button. When I click SKIP it appears to have processed it as the error goes away but then a few minutes later the error comes back, log apply stops and the failed SQL statement is the same create index statement. I guess the Skip doesn't mean Skip, it means Retry... My question is how do I get past this? Logs have been piling up.

Hi,
Ok I applied :
SQL> ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Database altered.
SQL> alter database start logical standby apply immediate;
Database altered.
SQL>
And now I received this :
ORA-16825: Fast-Start Failover and other errors or warnings detected for the database
Cause: The broker has detected multiple errors or warnings for the database. At least one of the detected errors or warnings may prevent a Fast-Start Failover from occurring.
Action: Check the StatusReport monitorable property of the database specified.
What does it mean to check the status report.....
I found this about monitorable status report !!
DGMGRL> show database 'M3RPT' 'StatusReport';
STATUS REPORT
INSTANCE_NAME SEVERITY ERROR_TEXT
* WARNING ORA-16821: logical standby database dictionary not yet loaded
DGMGRL>
What can I do ?
Thanks a lot
oldschool
Edited by: oldschool on Jun 4, 2009 2:37 AM

Create table on Logical Standby Database

Dear DBAs,
here is my situation;
1. My primary database (where the tables' owner is "ICC" having a DBA) is used for insert/update transactions.
2. The logical stdby DB (dataguard structure with MAX availability) is used to generate reports, after updating some tables owned by the same user "ICC". note that these tables are excluded from the replication.
3. The developers might need to create this kind of tables to generate another kind of reports.
The issue is that when the standby apply is enabled or disabled, the user ICC is not able to create a new table, it gives ORA-01031: insufficient privileges. note that it's not practical to ask the DBA to disable the "APPLY" at any table creation.
Do you have an idea about how to resolve.
My database is 10gR2 path.10.2.0.4.0 on Windows 2003
Thank you in advance

If you stop applying log on the logical standby you can easily create a table over there. See oracle docs. The following list shows >how to re-create a table and restart SQL Apply on that table:
>
Stop SQL Apply:
SQL> ALTER DATABASE STOP LOGICAL STANDBY APPLY;
Ensure no operations are being skipped for the table in question by querying the DBA_LOGSTDBY_SKIP view:
SQL> SELECT * FROM DBA_LOGSTDBY_SKIP;
ERROR STATEMENT_OPT OWNER NAME PROC
N SCHEMA_DDL HR EMPLOYEES
N DML HR EMPLOYEES
N SCHEMA_DDL OE TEST_ORDER
N DML OE TEST_ORDER
Because you already have skip rules associated with the table that you want to re-create on the logical standby >database, you must first delete those rules. You can accomplish that by calling the DBMS_LOGSTDBY.UNSKIP >procedure. For example:
SQL> EXECUTE DBMS_LOGSTDBY.UNSKIP(stmt => 'DML', -
schema_name => 'HR', - object_name => 'EMPLOYEES');SQL> EXECUTE DBMS_LOGSTDBY.UNSKIP(stmt >=> 'SCHEMA_DDL', -
schema_name => 'HR', - object_name => 'EMPLOYEES');
Re-create the table HR.EMPLOYEES with all its data in the logical standby database by using the >DBMS_LOGSTDBY.INSTANTIATE_TABLE procedure. For example:
SQL> EXECUTE DBMS_LOGSTDBY.INSTANTIATE_TABLE(shema_name => 'HR', -
object-_name => 'EMPLOYEES', -
dblink => 'BOSTON');
Start SQL Apply:
SQL> ALTER DATABASE START LOGICAL STANDBY APPLY IMMEDIATE;Regards.

ORA-01403: no data found on LOGICAL STANDBY database

Hi ,
Logical Standby issue :
Oracle 10.2.0.2 enterprise edition .
M Working on LOGICAL Standby since 1 yrs but still i havent got this ......................................
I m getting countinuously no data foud errror on logical standby database .
I found the table causing the proble(db_logstdby_events) and skipped that table and instanciated table using bwlow package:
exec dbms_logstdby.instantiate_table (.......................................
but when i start apply process on logical standby it again give no data found for new table :
Even i tried to instantiate the table using EXPORT/IMPORT during down time but the same facing same problem .
As much as i known abt the error that is :
table1
id
10
20
30
Now if sql apply process on logical standby tries to performe the update transaction(for example) as belows
update table1 set id=100 where id=50;
above query will not be completed cos it will never find the values 50 which is not in table .Thts why this error comming ..
Now my worry is ... no users dare to change/make such changes on Logical standby .So if there is no changes in tables then sqll apply should get all the values to be needded for an update ......
watingggg guyssss/......

Troubleshooting ORA-1403 errors with Flashback Transaction
In the event that the SQL Apply engine errors out with an ORA-1403, it may be possible to utilize flashback transaction on the standby database to reconstruct the missing data. This is reliant upon the undo_retention parameter specified on the standby database instance.
ORA-1403: No Data Found
Under normal circumstances the ORA-1403 error should not be seen in a Logical Standby environment. The error occurs when data in a SQL Apply managed table is modified directly on the standby database, and then the same data is modified on the primary database.
When the modified data is updated on the primary database and received by the SQL Apply engine, the SQL Apply engine verifies the original version of the data is present on the standby database before updating the record. When this verification fails, an ORA-1403: No Data Found error is thrown by Oracle Data Guard: SQL Apply.
The initial error
When the SQL Apply engine verification fails, the error thrown by the SQL Apply engine is reported in the alert log of the logical standby database as well as a record being inserted into the DBA_LOGSTDBY_EVENTS view. The information in the alert log is truncated, while the error is reported in it's entirety in the database view.
LOGSTDBY stmt: update "SCOTT"."MASTER"
set
"NAME" = 'john'
where
"PK" = 1 and
"NAME" = 'andrew' and
ROWID = 'AAAAAAAAEAAAAAPAAA'
LOGSTDBY status: ORA-01403: no data found
LOGSTDBY PID 1006, oracle@staco03 (P004)
LOGSTDBY XID 0x0006.00e.00000417, Thread 1, RBA 0x02dd.00002221.10
The Investigation
The first step is to analyze the historical data of the table that threw the error. This can be achieved using the VERSIONS clause of the SELECT statement.
SQL> select versions_xid
, versions_startscn
, versions_endscn
, versions_operation
, pk
, name
from scott.master
versions between scn minvalue and maxvalue
where pk = 1
order by nvl(versions_startscn,0);
VERSIONS_XID VERSIONS_STARTSCN VERSIONS_ENDSCN V PK NAME
03001900EE070000 3492279 3492290 I 1 andrew
02000D00E4070000 3492290 D 1 andrew
Depending upon the amount of undo retention that the database is configured to retain (undo_retention) and the activity on the table, the information returned might be extensive and the versions between syntax might need to be changed to restrict the amount of information returned.
From the information returned, it can be seen that the record was first inserted at scn 3492279 and then was deleted at scn 3492290 as part of transaction ID 02000D00E4070000. Using the transaction ID, the database should be queried to find the scope of the transaction. This is achieved by querying the flashback_transaction_query view.
SQL> select operation
, undo_sql
from flashback_transaction_query
where xid = hextoraw('02000D00E4070000');
OPERATION UNDO_SQL
DELETE insert into "SCOTT"."MASTER"("PK","NAME") values
('1','andrew');
BEGIN
Note that there is always one row returned representing the start of the transaction. In this transaction, only one row was deleted in the master table. The undo_sql column when executed will restore the original data into the table.
SQL> insert into "SCOTT"."MASTER"("PK","NAME") values ('1','andrew');
SQL> commit;
The SQL Apply engine may now be restarted and the transaction will be applied to the standby database.
SQL> alter database start logical standby apply;

Logical Standby Database in NOARCHIVE Mode

Hi,
I have configured a Logical Standby Database for Reporting purposes. A Physical Standby Database is running for MAA. i.e. in case of Role Transition (switch/Failover) the Physical Stdby Db will get the role of the Primary.
The logical standby database is creating a lot of Archive Redologs files, nearly every minute. Redolog files are 50MB and there is no work done in db during the time. I'm NOT using Standby Redolog files.
Is there a need for logical standby database to be in NOARCHIVELOG mode? The Primary is definatley in ARCHIVELOG mode.
Thanks for any responses.
regards
Sahba

hi,
well there are two things to the above:-
1. there was an archive file nearly every minute:
this is due to a db recovery. for some reason, the db was in inconsistent state, after a sudden shutdownof the OS. I was on a test environment, on windows vista, unfortunately. unimportant ... a reboot solved it.
2. Logical standby db in NOARCHIVE MODE when setup for the purpose of Reporting.
As long as the MAA configured for the primary db, such as physical standby db, and a second, the logical standby db setup purely for the purpose of reporting, which then can run with NOARCHIVELOG mode, after converting the physical standby db to logical.
logical standby db uses Streams architecture, so this method brings cost, time and performance advantages to the customer.
regards
Sahba

How to delete the foreign archivelogs in a Logical Standby database

How do I remove the foreign archive logs that are being sent to my logical standby database. I have files in the FRA of ASM going back weeks ago. I thought RMAN would delete them.
I am doing hot backups of the databases to FRA for both databases. Using ASM, FRA, in a Data Guard environment.
I am not backing up anything to tape yet.
The ASM FRA foreign_archivelog directory on the logical standby FRA keeps growing and nothing is get deleted when
I run the following command every day.
delete expired backup;
delete noprompt force obsolete;
Primary database RMAN settings (Not all of them)
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 9 DAYS;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD' CONNECT IDENTIFIER 'WMRTPRD_CWY';
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD2' CONNECT IDENTIFIER 'WMRTPRD2_CWY';
CONFIGURE DB_UNIQUE_NAME 'WMRTPRD3' CONNECT IDENTIFIER 'WMRTPRD3_DG';
CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON ALL STANDBY;
Logical standby database RMAN setting (not all of them)
CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 9 DAYS;
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
How do I cleanup/delete the old ASM foreign_archivelog files?

OK, the default is TRUE which is what it is now
from DBA_LOGSTDBY_PARAMETERS
LOG_AUTO_DELETE TRUE SYSTEM YES
I am not talking about deleting the Archive logs files for the Logical database that it is creating, but the Standby archive log files being sent to the Logical Database after they have been applied.
They are in the alert log as follows under RFS LogMiner: Registered logfile
RFS[1]: Selected log 4 for thread 1 sequence 159 dbid -86802306 branch 763744382
Thu Jan 12 15:44:57 2012
*RFS LogMiner: Registered logfile [+FRA/wmrtprd2/foreign_archivelog/wmrtprd/2012_01_12/thread_1_seq_158.322.772386297] to LogM*
iner session id [1]
Thu Jan 12 15:44:58 2012
LOGMINER: Alternate logfile found. Transition to mining archived logfile for session 1 thread 1 sequence 158, +FRA/wmrtprd2/
foreign_archivelog/wmrtprd/2012_01_12/thread_1_seq_158.322.772386297
LOGMINER: End mining logfile for session 1 thread 1 sequence 158, +FRA/wmrtprd2/foreign_archivelog/wmrtprd/2012_01_12/threa
d_1_seq_158.322.772386297
LOGMINER: Begin mining logfile for session 1 thread 1 sequence 159, +DG1/wmrtprd2/onlinelog/group_4.284.771760923

Error when logical standby database

Similar Messages

Maybe you are looking for