Error when login and authorizing my new computor

error when login and authorizing my new computor

Zachy,
It goes something like this...
Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

Similar Messages

  • After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one,  When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine.  How

    After getting a new desktop I downloaded iTunes and authorized my new computer and then de-authorized my old one,  When I try to update my 5S it says my phone is not authorized and list my wifes email address as the account holder and not mine.  How do I correct this. I am using Windows 8.1 .  My wife has never had an iTuunes account

    Hello Lakesidetom,
    It sounds as though you are experiencing an issue with an Apple ID and authorizations. Based on your post, it sounds like you are familiar with the authorizing and deauthorizing process. The Apple ID in question (your wife's email) may be originating from the iPhone you are attempting to update. Is it possible that your wife created an Apple ID or iCloud account which is signed in on that iPhone? Below, I have included links to some resources that may help you determine if your wife has created an Apple ID:
    How to find your Apple ID - Apple Support
    Use these steps if you forgot your Apple ID or aren't sure that you have one.
    Apple - My Apple ID
    If you can't remember your Apple ID, just provide us with some information and we'll find it for you. Then we'll help you reset your password.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    Bobby_D

  • I have a A12E6 error when downloading and installing apps

    I have an
    A12e6 error when downloading and installing apps   yesterday i had the A12e1 error so i used the cleaner tool and did a new install but today again i have an arror A12e6
    Do you have a solution for me???? (mac osx 10.7.5)
    kind regards Arold

    Hi Arold,
    Welcome To The Forums
    http://forums.adobe.com/thread/1197816 or http://forums.adobe.com/thread/1291134 may help,
    Thanks!
    Eshant

  • I am getting an error when trying to download  the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege  to make changes. I have not had this problem before

    I am getting an error when trying to download  the new Game of Thrones shows. The error is err = -61 You do not have the privilege to make changes. (err = -61) you do not have the privilege  to make changes. I have not had this problem before

    Solution:
    Open Disk Utility.
    Select your external hard disk and run a “verify” on it. After a few minutes (depending on the size of your drive), you should be good to go. You don’t need to run a “repair” on it... (at least I didn’t have to). See photo for reference.
    This should fix the permissions issue, because on my Mac running Mountain Lion I was unable to edit the permissions in the get info dialog window even after "unlocking" the drive.

  • Why does it say "unknown error" when I try to purchase new episodes for the walking dead game?? :(

    Why does it say "unknown error" when I try to purchase new episodes for the walking dead game?? I have all of billing info up to date, changed my password etc etc and still get an "unknown error" message. Help!

    - Try a reset. Nothing is lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>Store and sign out and then sign back in.

  • I keep getting an error when trying to receive the new update iOS7 on iPhone5.  Any suggestions?

    I keep getting an error when trying to receive the new update iOS7 on iPhone5.  Any suggestions?

    Do the update using iTunes on your computer.
    Plug your iPhone into iTunes (current version), let it sync, then click "Check for Updates" on the iPhone's summary page in iTunes.

  • Get the following error when trying to add a new user - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

    Get the following error when trying to add a new user on Mac OS Server 10.5 - Error of type eDSSchemaError (-14142) on line 1235 of /SourceCache/WorkgroupManager/WorkgroupManager-421/PMMUGMainView.mm

    How come Leopard let me use the WGM in standard mode?
    While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
    If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
    If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
    So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
    Yes.

  • Hi, I have a mid 2010 13" MacBook Pro and I keep getting a POSIX error when trying to format my new harddrive. Help?

    Hi guys, one day I turned my MacBook Pro on and it was frozen at the login screen, so I did a hard shutdown and restarted it just to get a blank white screen that didn't change. So I took it to the apple store for a genius appointment and they diagnosed the problem as a failed hard drive. So I got a new hard drive and bought snow leopard installation disc since I didn't have my original installation anymore and installed the new harddrive. I go to disc utility to erase it and create a new partition on it so the Mac will recognize it as a viable option to install snow leopard on, and I get a POSIX error that says: "the operation could not be completed. Cannot allocate memory."
    So I call Apple and I'm told that it could very possible be the hard drive cable which is failing me here and not allowing the connection to the HDD. So I ordered the appropriate one on Amazon for my make and model (can be found here: http://www.amazon.com/gp/aw/d/B004VSZCL4/ref=ya_aw_oh_pit)
    A lot of the reviews say a new one of these cables fixed their problems with the POSIX error, so I'm wondering what you guys think of this? And if you have any other ideas that could help out?
    Any advice would be appreciated.
    Thanks,
    Zach

    Zachy,
    It goes something like this...
    Put your new drive in the enclosure. Use Disk Utility to format it, etc. I'd give it a slightly different name than the original. Let's say you have Old Disk and New Disk as your drive names. Use Carbon Copy Cloner to copy Old Disk to New Disk. Now you should have an exact copy, which you can test by rebooting and holding down the Option key. Choose New Disk from the list and let it boot, make sure all is well.
    Shut down and physically swap the drives. Take Old Disk and put it in the enclosure. Now your system has a new disk with a lot more space and you can reformat your old disk and just use it for large files or whatever.

  • Disk utility reports "Device could not be opened" - error when trying to format a new drive in a Mac Pro 1,1

    MacPro 1,1 Quadcore 3 GHz (2006 "Woodcrest")
    32 GB RAM
    ATI Radeon HD 5770
    OS X 10.7.5 Lion
    I have encountered the following behavior when trying to format a new drive with disk utility. This description has also been send via the Mac Pro feedback as a bug report to Apple.
    On searching the web and forums with this particular error message and behaviour I could not find any usful results. So maybe the following description may be helpful for some users.
    Best regards.
    1. Drive Bay 1 contains the original 250 GB Startupdisk. It works without errors.
    2. Drive Bays 3 and 4 contain each a WD Caviar Black 2 TB SATA 3 HDD. They work without errors.
    3. I have purchased a third WD Caviar Black 2 TB HDD.
    4. In Drive Bay 2 there has been a Seagate 750 GB HDD, which worked in conjunction with all the other drives without error.
    5. I exchanged the Seagate HDD in Drive Bay 2 with the new WD Caviar Black 2 TB HDD.
    6. On starting the system, it will report to initialize the new drive.
    7. On trying to initialize the new drive with disk utility it reports the error [translated from German] "Erasing of the volume has failed. The device could not be opened."
    8. I thought that the drive is faulty. Thus I created an RMA-Case at WD. They exchanged the drive without problems.
    9. On getting the exchanged WD Caviar Black 2 TB drive I put it in Drive Bay 2 as before.
    10. On trying to erase and format the exchange drive I got the same error message "Drive could not be opened."
    10.1 On selecting the physical drive in the devices list, disk utility reports all information in the bottom area of its window as usual, e. g. hard disk description, connection bus, type and place, capacity, write status, SMART-status, partition scheme.
    10.1 On leaving that drive selected in the devices list and clicking the info-button, disk utility will also report additional information as usual, e. g. Name, Type, partition scheme, media-identification, media name, media type, device tree, … , number of relocated sectors, etc.. All this information appears to be valid, as can be compared to the other devices information inside the other Drive Bays. Also the disk numbering scheme appears to be standard - 4 HDDs give the numbering disk0, disk1, disk2, disk3.
    10.2 From that information I conclude that the SATA-bus and connectors electrically work properly, the drive has spun up and can be accessed by the system normally.
    11. I powered down the computer, took out the HDDs from Drive Bays 3 and 4 and put the caddy with the new exchange drive in Drive Bay 4 [Maybe, I could have also just left it alone in Drive Bay 2, or 3].
    12. After powering on the system, disk utility will quick format the exchange drive without any error message. Also, when erasing again by selecting the option to write zeros to the drive, disk utility will finish without error.
    13. After disk utility finished formatting, I put back the original drives into Drive Bay 3 and 4 and put the now newly formatted drive back into Drive Bay 2.
    14. After switching on the computer the system start and login proceeds without any error message. All drives appear as expected on the desktop.

    If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
    The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
    Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

  • Error when trying to create a new Voyager Workspace through Infoview

    Hi,
    When trying to create a new Voyager Workspace through Infoview, I get the following Error
    "An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
    I clicked on New Voyager Workspace & then it displays the list of connections available. When, I click on any connection , then I receive thefollowing error
    "An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
    An Insight of our environment regarding this, we have an clustered environment with Voyager Installed. Platform is Windows Server 2003. We have all the required Microsoft client tools installed on the Production Servers.
    This was working fine earlier. We were able to create Voyager WorkSpace at one instance of time. The problem at that point of time was the MDAS Server was not showing up in CMC, i.e as we had clustered environment, only one of the MDAS Server was showing up in the CMC. it was missing the other MDAS Server. but, at that time we were able to create Voyager Workspace.
    So, in order to view the other MDAS Server in CMC, we had changed the name of the Server in CCM for both the MDAS Servers.
    In detail, Server A.MDAS Server & Server B.MDAS Server- they both were not showing up in CMC. only one of them was showing up in Servers list in CMC.
    So, in CCM we had changed the name of Server1.MDAS server to be Server1 &
    for Server2.MDAS Server to be Server1 as well.
    AFter this both the MDAS Servers were showing uo in CMC.
    but, when I login into Infoview & click on new Voyagerworkspace & select a connection, I recieve the follwoing error
    "An Error hs occured while attempting to connect to the OLAP server.Failed to initialize(The following component Microsoft OLEDB Provider for Anaysis Services 2005 returned server error(An error was encountered in the transport layer;the peer prematurely closed the connection"
    Request to let me know the possible steps in resolving this ASAP

    Hi,
    Try to create the objects again and take the screenshot of SU53 when you get the error and see the authorization object for which you are getting the error here.
    It is possible that you dont have development authorization.
    Also the issue could be that the system is not configured to create the objects begining with Z.
    Check this with basis as well.
    Thanks
    Ajeet

  • Error when trying to create a 'New Chat'

    Using 10.3.9, whenever I try and create a new chat to speak with multiple friends, i get this error:
    NSImageCacheException:
    Can't cache image
    It does not crash the application, but I cannot add anybody to the chat. It completely locks up that particular 'new chat' but my other chats continue to work with no problems. Any suggestions?
    eMac G4   Mac OS X (10.3.9)  

    Hi Beau,
    I take it this is when you are starting a group Text chat as opposed to a 1-1 Text chat.
    A "plain" Text chat can manage on the login port of 5190 on the TCP protocol to pass the data through a modem or router's firewall.
    A Group Chat (or Direct chat and file sending) need to have this port open to the UDP protocol.
    Do you know if this is a port and protocol that is open or are you using UPnP in your device(s) ?
    8:11 PM Friday; December 15, 2006

  • Error when trying to add a new item in table

    Hello I have this error when I want to insert a record in a table of the year 2010,
    Warning:  mysql_num_rows(): supplied argument is not a valid MySQL result resource in /home/content/r/e/l/reliefsale/html/php/reliefsale_functions.php on line 16
    I have 3 more years 2009, 2008 and 2007, when I want to insert a new item in any of the other years, everything works fine but in 2010 any ideas??
    Thanks

    Hi there,
    better post your question in the regular Dreamweaver Application Development forum where a wider group of users might be able to reflect on your issue and help you out. The current forum deals with questions which are related to the Dreamweaver extension ADDT, which generates non-standard PHP code code and has been discontinued over a year ago.
    Cheers,
    Günter

  • Page cannot be displayed error when login to EBS home page

    Hi All,
    I have some problem login to EBS page, if only one responsibility is active to user it will get error Page cannot be Displayed error 404 on the Main Menu.
    However if 2 or more responsibilities are active no error will come up and it will show all responsibilities.
    Below is the log I got from apache.
    [Thu Apr 28 15:58:26 2011] [warn] mod_plsql: Stale Connection due to Oracle error 6502
    [Thu Apr 28 15:58:26 2011] [error] mod_plsql: /pls/XXX/OracleNavigate.menuBypass ORA-6502
    ORA-06502: PL/SQL: numeric or value error: hex to raw conversion error
    ORA-06512: at "APPS.ICX_CALL", line 1077
    ORA-06512: at "APPS.ORACLENAVIGATE", line 2358
    ORA-06512: at line 28
    Appreciate if someone can share something about this.
    Database Server
    RDBMS : 10.2.0.2.0
    Oracle Applications : 11.5.10.2
    Thanks a lot

    Hi All,
    Thanks for all your help.
    Seems I already found out the issue.
    Since we are using "Personal Home Page" for the system profile option "Self Service Personal Home Page Mode" I checked oracle note and found out
    that 11i did not support this mode. Maybe this is the problem that is why we are getting page cannot be displayed error when only 1 responsibility is active.
    The way to fix this, is to use mode 'Framework Only' instead of 'Personal Home Page' as Oracle are phasing out mod_plsql based UI and it will not be present in future releases. No maintenance is being performed (i.e. bug fixes) to the mod_plsql based UI technology.
    Please check this note for more clearer explanation:
    Is The 'Personal Home Page' Mode Supported In Oracle 11i Applications? [ID 368628.1]
    Again, thank you for your help!

  • Multiple errors when syncing and cannot install media or apps

    I had some problems uninstalling apps from my new BlackBerry Curve 9300 -- the phone froze and I foolishly disconnected it from my Mac without "ejecting" it -- and now I am having big problems syncing. I cannot add media or new apps to the BB and when I tried resetting the phone by removing the battery I encountered the following error message: "Uncaught exception: java.lang.Error".
    In addition, when I connect the BB to my Mac with the USB cable I get the following error from Mac OS: "Mac OS X can't repair the disk 'NO NAME." The BB appears on my desktop as a read-only disk.
    I can sync information (contacts and calendars) but I cannot sync media. The error message is: "BlackBerry requires write permissions on your media card to sync your media files." Obviously, the permissions have been damaged.
    And finally, when I try to add new apps to the BB using BlackBerry Desktop Software, I get the following error message: "BlackBerry Desktop Software failed to validate your BlackBerry device update. Aborting install due to validation failure. Some packages contained unsatisfied dependencies."
    Yes, so I have created quite a problem. What do I do? I don't mind wiping the BB and starting fresh, but I don't know even how to do that!
    Any help would be greatly appreciated. I posted this question in this forum because I think it is a Mac-BlackBerry problem, perhaps something to do with disk permissions?
    -RE.
    Solved!
    Go to Solution.

    I opened the log file in Blackberry Desktop and the "unsatisfied dependencies" error was highlighted in red. I don't understand computer logs; however, it seemed to me that Desktop was looking for the BlackBerry Podcase app, which I had deleted. I reinstalled it using BlackBerry AppWorld on my BB and now Desktop and my BB are talking to each other again.
    The moral of the lesson: don't ever delete an app on your BB with the word "BlackBerry" in it.
    I still don't know how the permissions problem with the media card fixed itself.

  • Error when Packaging and PDF'ing File

    I am curently involved in creating a comprehensive brand book (60 pages) for our company in InDesign CS4 and seem to have a problem when I PDF or go to package the InDesign file. The message I get is:
    "Error encountered while reading JPEG image. Image may be damaged or incompatible. Resave the image with different settings and try again."
    Funny thing is when I close InDesign and re-open the file, then go to PDF it works fine. But then after I have worked on it and go to re-PDF it starts Ok but gets to about page 18 and the error pops up. I get the same error when I go to package the file even in the package summary - could not figure out what was wrong. I tried deleting all images off that page then re-PDF and still does not work.
    What's worse is that InDesign does not provide detailed information regarding the image or error, I had to look where the bar stopped while I was in the process of PDF to figure out what page the image is on.
    Can anyone shed some light on this?
    Thanks

    Here is an earlier thread discussing this problem:
    http://www.adobeforums.com/webx?128@@.59b7927d
    There's some unrelated stuff in the middle, but relevant information at both ends.
    Peter

Maybe you are looking for