Error when MAKE any programs :(

I always get this error when install anykind of programs, even I have tried to use HomeBrew and no error to be noticed in $brew doctor
Can anyone help me to solve this!!!!!!!!!!

Have you tried reading the linked page? The one next to the big red READ THIS message?
Here it is again in case you missed it somehow…
https://github.com/mxcl/homebrew/wiki/Troubleshooting
Have you installed the latest Xcode?

Similar Messages

  • Error When Running ANY Program

    Anytime I try to run ANY Java program, i get the following error:
    Exception in thread "main" java.lang.NoClassDefFoundError: Program Name
    I am POSITIVE I have compiled the programs and the *.class file appears. Anyone have any idea whats going on?

    Anytime I try to run ANY Java program, i get the
    following error:
    Exception in thread "main"
    java.lang.NoClassDefFoundError: Program Name
    I am POSITIVE I have compiled the programs and the
    *.class file appears. Anyone have any idea whats going
    on?I just ran across what appears to be the exact same problem. The solution was to clear the CLASSPATH variable in the registry first, by entering "set classpath=", then calling the program with "java <program name>". In your case:set classpath=
    java InvoiceAppType both in the directory where InvoiceApp.class is located. If, for some reason, that doesn't work, try:set classpath=<path to library directory of Java installation>
    set classpath=
    java InvoiceAppAn example of the library directory of the Java installation would be "\Program Files\Java\j2re1.4.2_02\lib"
    A more permanent solution would be to remove the CLASSPATH key from the registry (the one under the SYSTEM category). This should also cause any other Java program to run correctly. However, the above should take care of the problem in the short-term.
    Here is the link to the thread, in case it might help you out further:
    http://forum.java.sun.com/thread.jsp?forum=32&thread=467639&tstart=0&trange=15
    Best of luck, and hope this helps.

  • Error when Generating the Program

    Recently there was an SP upgrade and my Planning Book started giving me this error message (SCM version =5.0 and SP = 7)
    "Error when generating the program" Message no. /SAPAPO/TSM141
    Diagnosis: Generated programs are programs that are generated based on individual data objects, such as planning object structure, planning areas and Infocubes. These programs are then executed in the transaction. An error occured during the generation of such a program
    Possible causes:
    1. The template has been corrupted
    2. The object that the template uses to generate the program contains inconsistencies; for instance an Infocube has not been activated
    This error occurs when I try to open the my planning book/creating the selection profile. I've re-activated the Infocube and later deactivate and active my POS and tried to do the same for the Planning Area....but the error still persists. I tried to create a new planning area and tried it again but the error still persists. I've tried to fix any inconsistencies in the planning area time series objects by running the consistency check....however the same error pops up during the consistency check....
    Anyone encountered this error message and any possible solutions to this issue.
    Thanks
    Surender

    I did find an ABAP Dump when looking at ST22.  The short message is as follows:
    Runtime Errors         GEN_BRANCHOFFSET_LIMIT_REACHED
    Date and Time          05/14/2007 19:33:54
    Short text
         Jump distance is too large and cannot be generated.
    What happened?
         A jump distance is too large and cannot be generated.
         A control structure or a routine with "CHECK" or "EXIT" contains
         too many ABAP statements.
         Error in the ABAP Application Program
         The current ABAP program "GP_MET_PSTRU_BASIC_FORMS" had to be terminate
          because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         During the generation of program "GP_MET_PSTRU_BASIC_FORMS", the system
          determined that
         within an ABAP event a control structure (for example, IF..ENDIF
         or LOOP..ENDLOOP) or a routine (for example, FORM routine) has
         become too large. The resulting jump distance is too large so that
        it could no longer be generated.
        With the internal load format, the jump distance must not be
        greater than 32768 (this is the size of approximately 10.000
        ABAP statements).
        The jump distance that is to be generated, however, is 50885.
    How to correct the error
       The ABAP application program must be changed.

  • Error When Opening Any Form

    Hi All.,
    Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
    Application:11.5.10.2
    OS-----------HP-UX
    DB-----------10.2.0.4.0
    File Name:
    oracle/forms/ui/FLWTextArea
    Work Around
    Relink the all the files
    Regenerated the jar files
    Regenerated the forms
    f60gen help=y
    Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
    Forms 6.0 (Form Compiler): Release - Production
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    PL/SQL Version 8.0.6.3.0 (Production)
    Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
    Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
    Oracle Multimedia Version 6.0.8.25.0 (Production)
    Oracle Tools Integration Version 6.0.8.17.0 (Production)
    Oracle Tools Common Area Version 6.0.5.32.0
    Oracle CORE Version 4.0.6.0.0 - Production
    Metalink Doc id
    java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

    Thanks,
    From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
    Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
    Here is an example:
    If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
    If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
    If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
    If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
    SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
    Enter value for bug_number: 9935935
    old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
    new 1: select bug_number from ad_bugs where bug_number='9935935'
    no rows selected
    SQL>

  • Mass processing - Error when processing Java programs / VMC out of memory

    When running a mass update background process that updates the status of a service order in CRM the job fails due to error 'Error when processing Java programs'. I checked the VMC (SM52) and noticed that there is an error about the VMC running out of memory.
    The background program can either be a PPF Action or a Z-ABAP program that performs the update. Both programs are performing a CRM_ORDER_INITIALIZE but it seems that the VMC is not releasing the memory fast enough.
    Is there anyway we can force the VMC to release the memory after processing of each individual order?
    Thanks!

    I got  similar issue and it got resolved by useing CRM_ORDER_INITILAIZE. Initalization should happen after every Order processing and see that only one header guid is passed to the the FM. May not be good option ,but just try by putting wait for 5secs after CRM_ORDER_INITILAIZE.

  • Error when generating update program

    Hi,
    I was loading transactional data in to Cube. The load had failed and in RSMO status tab is showing that Error when generating update program. could you please suggest me some one how to resolve it.
    regards,
    Neeraja
    null

    Hi,
    Actually when you are loading data, the update program is executed. It is generated while you create the update rules for your data target. Please check whether the update rules are active or just go to the update rules and activate it again. Try loading data after activation and let us know the results.
    With Regards

  • Error when make controller with MVC entity framework

    error when make MVC with entity framework, WHY??

    Hi Arif Kalbu,
    It would be better if you could share us the detailed error message, so I could provide useful informaiton or provide the correct forum for this issue, you know that this forum is to discuss the VS IDE.
    But if the real issue is related to the MVC project, maybe the ASP.net forum would be better: http://forums.asp.net. If then, you could get an answer more quickly and professional. Thanks for your cooperation.
    Best Regards,
    Jack
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled

    When I try to add any new menu in my newly cloned instance I get this error:
    Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.
    Using Oracle EBS version 12.1.3.
    Details:
    Menu JOB_STRUCTURE_MENU
    User Menu Name Job Strucure Menu
    Menu Type Standard
    Description Menu to add job, grade, and incentives
    Seq = 1
    Prompt = Enter and Maintain
    Function = Combined Person & Assignment Form WF="US SHRMS TSKFLW
    When I click save I get the error.
    Any assistance would be greatly appreciated.
    Thanks!

    Please post the details of the application release, database version and OS.
    When I try to add any new menu in my newly cloned instance I get this error:
    Error when adding any menu - FRM-40735: ON-INSERT trigger raised unhandled excpetion. ORA-04031.Is the issue with all menus or specific ones only?
    Did AutoConfig complete successfully?
    When I click save I get the error.
    Any assistance would be greatly appreciated.Do you have any invalid objects in the database?
    Any errors in the database log file?
    Please obtain FRD log file for details about the error -- https://forums.oracle.com/forums/search.jspa?threadID=&q=FRD+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • How can i turn off all the mails that i recive when use any program form my iPad?

    How can i turn off all the mails that i recive when use any program form my iPad?

    Everytime i use the my ID recive an e Mail to inform me.

  • Error when exporting ABAP Programs and the Project

    Hi All,
    I keep on getting the following errors when I'm exporting the entire Project or only ABAP Programs (see attached screenshots).
    - Screenshot 1 shows an error when exporting a Project.
    - Screenshot 2 shows an error when exporting ABAP Program(s).
    These errors occur in the DEV environment.
    Please help.
    Thank you all.
    Kind regards,
    Roli

    Hi Ramakrishna,
    I will send the log file for when exporting a project. However, the issue of exporting ABAP Programs is nor resolved.
    In CMC we had to configure the system to Generate ABAP = True.
    Thank you.
    Kind regards,
    Roli

  • Error when running a program /RPM/FIN_PLAN_INT

    when executing the program "/RPM/FIN_PLAN_INT", I'm getting an error stating as "Category ID does not exist for item.Instantiate categories first"
    This error is hitting for only 4 Items in list of all 173 Item. Hence the Financial cost are not getting update for all the items when executing the program. The DB update failed.
    I checked the financial Category IDs and its maintained properly and working fine with other Items. Why this is happening for only the 4 items? Am I missing something in config?
    Please experts provide me some valuable suggesions.

    Hi;
    When you define and edit the mapping between the project management role function ID and the financial planning view, category, or group. You can also decide on whether the cost or revenue rate is to be considered for the financial information calculation.
    1. Execute report /RPM/PLAN_INT_PREP to create financial and capacity categories and groups for the bucket or the portfolio items based on the parameters mentioned in the selection screen.
    2. Execute report /RPM/FIN_PLAN_INT to perform the financial planning for a portfolio item for the different portfolio items based on the parameters mentioned in the selection screen.
    Prerequisite: For the portfolio item, you must have executed report /RPM/PLAN_INT_PREP before.
    3. Execute report /RPM/BUCKET_ROLLUP to roll up the financial data for the different categories and groups of the portfolio items to its higher-level buckets.
    Hope this help you.
    Best Regards.
    Mariano

  • Jave Script error when opening any page.

    Whenever I load a page into Firefox I get the following error message: "[javascript application] Type Error: Components Class [CID] is undefined" This has happened with the last few versions of Firefox.

    This issue can be caused by an extension that isn't working properly.
    Do you have any AVG extensions or toolbars installed?
    *Tools > Add-ons > Extensions
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Error when starting remoteapp program - "the following is not in your list of authorised programms:"

    have 2 rd  web servers set up using an nlb cluster
    3 rd sesison host servers - dns round robin
    session broker (installed on dc)
    web single sign on is in place using cert generated internally on standalone ca
    I have added several programs to list on all session host servers and allows "domain users" access to them.
    regardless of the account that logs on I get the error "the following remoteapp program is not in the list of authorized programs: WordPad
    I have tried various things but I am sure the setup is correct.. any ideas?

    Hello,
    Based on my experience on similar issues, this error may be caused by missing Host Records of the TS servers on the local DNS.
    To fix this issue, please add the Host Records of the Terminal Servers into the local DNS and test it again.
    Let us know the result if possible. Thanks.
    Best Regards,
    Lionel Chen

  • Syntax Error when generate print program in HRFORMS

    Dear All,
    I created form for payslip using HRFORMS, the name form is ZPS_TPI_01. When I activate the form, the error raised: Generated print program contains a syntax error
    Diagnosis
      Generated print program /PYXXFO/ZPS_TPI_01_PRNT conains a syntax error in line 9 of include /PYXXFO?ZPS_TPI_01_PAYR.
    I have already apply note 878168 but it is not work.
    Please advise me.
    Thank you,

    hi,
    can you let me know for which country  are you trying to generate the HR form for payslip?
    There are certain countries for which payslip isnt supported.
    For such countries you get a similar error.
    Thank you,
    Jose

  • Error When Compiling MailTest  Program ?

    HI. Guys. I am getting this error when i try to compile a program which send an email.
    Compiling 1 source file to F:\Projects\JavaMail\war\WEB-INF\classes
    [javac] F:\Projects\POC\JavaMail\src\SendMailBean.java:3: package javax.mail does not exist
    [javac] import javax.mail.*; //JavaMail packages
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:4: package javax.mail.internet does not exist
    [javac] import javax.mail.internet.*; //JavaMail Internet packages
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:24: cannot find symbol
    [javac] symbol : class Session
    [javac] location: class SendMailBean
    [javac] Session l_session = Session.getDefaultInstance(l_props, null);
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:24: cannot find symbol
    [javac] symbol : variable Session
    [javac] location: class SendMailBean
    [javac] Session l_session = Session.getDefaultInstance(l_props, null);
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:29: cannot find symbol
    [javac] symbol : class MimeMessage
    [javac] location: class SendMailBean
    [javac] MimeMessage l_msg = new MimeMessage(l_session); // Create a New message
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:29: cannot find symbol
    [javac] symbol : class MimeMessage
    [javac] location: class SendMailBean
    [javac] MimeMessage l_msg = new MimeMessage(l_session); // Create a New message
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:31: cannot find symbol
    [javac] symbol : class InternetAddress
    [javac] location: class SendMailBean
    [javac] l_msg.setFrom(new InternetAddress(p_from)); // Set the From address
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:34: package Message does not exist
    [javac] l_msg.setRecipients(Message.RecipientType.TO,
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:35: cannot find symbol
    [javac] symbol : variable InternetAddress
    [javac] location: class SendMailBean
    [javac] InternetAddress.parse(p_to, false));
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:38: package Message does not exist
    [javac] l_msg.setRecipients(Message.RecipientType.CC,
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:39: cannot find symbol
    [javac] symbol : variable InternetAddress
    [javac] location: class SendMailBean
    [javac] InternetAddress.parse(p_cc, false));
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:43: package Message does not exist
    [javac] l_msg.setRecipients(Message.RecipientType.BCC,
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:44: cannot find symbol
    [javac] symbol : variable InternetAddress
    [javac] location: class SendMailBean
    [javac] InternetAddress.parse(p_bcc, false));
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:49: cannot find symbol
    [javac] symbol : class MimeBodyPart
    [javac] location: class SendMailBean
    [javac] MimeBodyPart l_mbp = new MimeBodyPart();
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:49: cannot find symbol
    [javac] symbol : class MimeBodyPart
    [javac] location: class SendMailBean
    [javac] MimeBodyPart l_mbp = new MimeBodyPart();
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:53: cannot find symbol
    [javac] symbol : class Multipart
    [javac] location: class SendMailBean
    [javac] Multipart l_mp = new MimeMultipart();
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:53: cannot find symbol
    [javac] symbol : class MimeMultipart
    [javac] location: class SendMailBean
    [javac] Multipart l_mp = new MimeMultipart();
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:64: cannot find symbol
    [javac] symbol : variable Transport
    [javac] location: class SendMailBean
    [javac] Transport.send(l_msg);
    [javac] ^
    [javac] F:\Projects\JavaMail\src\SendMailBean.java:79: cannot find symbol
    [javac] symbol : class MessagingException
    [javac] location: class SendMailBean
    [javac] } catch (MessagingException mex) { // Trap the MessagingException Error
    [javac] ^
    [javac] 19 errors

    Looks like you're using ant. You need to configure your ant build.xml file
    so that mail.jar (and activation.jar unless you're using JDK 6) is in your
    classpath when you compile (and run, of course).

Maybe you are looking for