Error when making a call to SAP using SaveData
Hi,
Iam getting the following error while making a function call to SAP
T:5392 *>RfcInstallStrucure2: field 1 (SIZE_DIM, t:0, l:1) offset 16 too small
Can somebody please explain me what's going wrong.
Thanks & Regards,
Sudha
Hi Sudha,
WELCOME TO SDN FORUMS!!!
It's a RFC Error. I think there is a problem with the length of the parameter you are passing to the RFC.
1. Please check the parameters that your are passing to your rfc.
2. I mean the datatype and length of the parameter that you are passing.
3. Instead of passing the parameters from the .net application to the RFC, test the RFC from the SAP GUI
with the input that you are going to pass from the .net application.
Hope it helps.
Regards,
Maheswaran.B
In order to keep the quality of the forum posts high and to involve more people in the process, SDN has
introduced some mechanism to reward points. In case your problem is solved, don't forget to do this otherwise you
might not get much help in the future anymore.
Message was edited by: Maheswaran B
Similar Messages
-
Hi I use my phone for conference calls and use the microphone jack to connect to speakers. It doesnt work when making phone calls but when i play music on the phone the jack works with the external speaker.
Happy to have been of help. Hope all goes smoothly.
BTW, for the sake of others who may help you here, it's usually most polite if you mark the post that answered your question as being the one that "solves" it, not your own post. That's how people get points here, if a questioner marks their post as either "helpful" or "solving". It's not an issue for me, but for those just starting out in the forums it may be important to them. See:
https://discussions.apple.com/static/apple/tutorial/mark.html
and
https://discussions.apple.com/static/apple/tutorial/reputation.html
Regards. -
Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new number.Help
I`ve tried restarting, rebooting, nothing works.
The interesting thing is that SIRI can call to previous mobile numbers (without the new digit) obviously not connecting , and, can call to any other numbers as an office or home number. So the problem is the new digit in the mobile numberEcuador has added an extra digit to mobile phone numbers but apple wont accept 10 digit phone numbers so we cant use facetime or apple IM or verify our new phone numbers. ( and Siri won't work either!) I have contacted apple support online but can't request a call back as the apple system says our new phone numbers are invalid. I am going to phone them tomorrow and you should complain too at http://www.apple.com/support/contact/. . The more people that bring this to their attention the faster it will get fixed
-
On IPhone 5S, when making cell calls, it connects to FaceTime.
On IPhone 5S, IOS 7.1.2, when making cell calls, it connects to FaceTime.
Hey there siteshop,
It sounds like you are still hearing the phone line ringing even after the person you call answers the line. I would try the troubleshooting outlined in this article:
iPhone: Troubleshooting issues making or receiving calls
https://support.apple.com/kb/TS3406
Toggle airplane mode: Tap Settings > Enable Airplane Mode, wait five seconds, then turn off airplane mode.
Ensure that your software is up to date:
Check for a carrier settings update.
Check for an iOS software update.
Note: Some updates may require a Wi-Fi connection.
If the iPhone has a SIM card, reseat the SIM card.
If the iPhone 4 or iPhone 4s is on the Verizon network, dial *228 from the iPhone and select option 2 to update the Preferred Roaming List (PRL). The PRL determines the cellular towers the phone uses for cellular service, selecting those with the best signal strength.
Reset the network settings: Tap Settings > General > Reset > Reset Network Settings.
Try to make or receive calls in another location.
Attempt to isolate to one network band:
If you're having the issue on LTE, disable LTE, if possible, and try again.
If you're having the issue on 3G/4G, disable 3G/4G, if possible, and try again.
Contact the carrier to check the following:
Your account is properly configured to use the specific iPhone that has the issue.
There are no localized service outages.
Your account doesn't have a billing-related block.
Your calls don't have errors on the carrier system.
Restore the phone as new.
If the above steps don't resolve the issue, go to an Apple Retail Store, carrier, Apple Authorized Reseller, or contact AppleCare to send the phone in for service.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
500 INternal server error on making ajax call to method of Application page
HI
I have a application page that have a method in code behond ..i need to call this method on usercontrol using jquey on client side..when i ma makeing the call to method using $.Ajax({definiotion});
then it gives me error 500 internal server error and this is coming only with the case when i am passing parameter to method usig javascript var object
help me out on this... if required i wll upload the code also..
regards
Piyush
piyush mishraThis forum is for customization and programming of Microsoft Project - the project management scheduling product.
A quick search turned up:
https://forum.jquery.com/
I'd try there. -
Skype crashing computer when making a call
when making a call on skype whole computers freezes and cant click on anything.
Attachments:
DxDiag.zip 12 KB
DxDiag.zip 12 KBSteveSkypeHelp wrote:
Hi there
I upgraded to the latest Skype v7.6.64.105 - ever since my Skype crashes when I make a call - oddly I get "not responding" but the call continues - I cannot press any Skype buttons during this time - when the call ends - the other person needs to hang up - then my Skype crashes and needs to restart.
I've uninstalled, restarted, reinstalled.
Cleared the %appdata% Skype folder - renamed this folder - had Skype recreate this folder.
I've done a system restore - same issue - then uninstalled/reinstalled.
Windows was upto date prior to system restore - then performed updates again.
My video drivers are up to date. Checked dell for updates - updated bios.
Reading on other boards - people are advised to run DxDiag - which I did and have attached. Skype seems to continue to work as expected when only using 'chat' - not audio.My audio devices drivers are up to date too?
I am at a loss now - please can you help? Faulting application name: Skype.exe, version: 7.6.64.105, time stamp: 0x55916aec
Faulting module name: igdumd32.dll_unloaded, version: 9.17.10.4229, time stamp: 0x55653f61
Exception code: 0xc0000005
Fault offset: 0x0000d480
Faulting process ID: 0xa30
Faulting application start time: 0x01d0bf235fbdf760
Faulting application path: C:\Program Files (x86)\Skype\Phone\Skype.exe
Faulting module path: igdumd32.dll
Report ID: c91269b3-2b19-11e5-becc-60d819fe036d
Faulting package full name:
Faulting package-relative application ID: Many thanksSteve
Skype is crashing on Intel graphics driver. The error message indicates that the issue is with "Switching Graphics" (NVIDIA <-> Intel). There are no driver updates available for Windows 8.1 for your laptop on the Dell site. However, you can try to update the NVIDIA NVS 4200M driver directly from the NVIDIA site. http://www.nvidia.com/download/driverResults.aspx/86814/en-us -
Unable to be heard when making a call?
I am unable to be heard when making a call, but can be heard when using speaker or headphone
There may be some issue with your mic. I'd go to an Apple store
-
Revision: 21394
Revision: 21394
Author: [email protected]
Date: 2011-06-16 12:34:13 -0700 (Thu, 16 Jun 2011)
Log Message:
bug fix for watson 2887837 Not getting duplicate session detected error when same flex client id is used from two different HTTP sessions in CRX.
get the sessions id before we invalidate the duplicate session.
Checkintests pass
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/endpoints/BaseHTTPEndpoint.javaFor our profect I think this issue was caused as follows:
Believing that remoting was full asynchronous we fired a 2 or 3 remote calls to the server at the same time ( within the same function ) - usually when the users goes to a new section of the app.
This seemed to trigger the duplicate http session error since according to http://blogs.adobe.com/lin/2011/05/duplication-session-error.html two remote calls arriving before a session is created will cause 2 sessions to be created.
Our current solution ( too early to say it works ) is to daisy chain the multiple calls together .
Also there seemed to be an issue where mobile apps that never quit ( thanks Apple! ) caused the error when activated after a few hours.
I guess the session expires on the server and the error above occurs on activation.
So the mobile apps now ping the server with a remote call when activated after sleeping for more than one hour.
All duplicate http errors are silently caught and reported.
Fingers crossed we won't get any more! -
i phone 3 shuts down after 3 to 4 mins when making a call - then large apple sign apeers phone frozen - only way to unlock is to re charge although there is enough battery - any answers would be welcome.
The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
But... This can happen if the phone has been Hacked / Jailbroken / Modified...
If this is the case... Then... None of the above will necessarily work...
And...
The discussion of Jailbroken Devices is against the Terms of Use of this Forum.
You will need to look elsewhere. -
When making a call NO DIAL TONE
when making a call NO DIAL TONE, and can't here the other person talking. Only
if pressing SPEAKER or when using the iPhone Stereo Headset.(SILENT BOTON IS OFF) please help!!Hello LA1, first off since iphone is a Cellular Phone there is no dial tone, as far as no sound though the earpiece on your iphone, try pluging/unpluging the headset from the jack on top of the iphone a few times, that usually clears up that problem.
Hope this helps. -
my phone will no longer play music through headphones or on speaker but will work when making a call on both headphones and speaker. Also when I plug in my iPhone to a jack that uses a power amp like external speakers it works fine. I have no idea whats going on i've restored it twice and still nothing.
did you update your phone?
-
Just activated new Iphone 4 and the mike does not work when making a call. it does work with speaker phone and face time. Any known fixes?
My wife's iphone 4 also has your same no ring problem as does my iphone 5 just less often. I called her iphone 4 at home from where I work 20 miles away on my iphone 5. With her phone in 3G mode ONE call went through and 9 went to voice mail in 10 tries. This is a 10% sucess rate!! I also could listen in real time from the wired work phone and the wired home phone. She turned off 3G mode and it went to "O" mode at the top left of the screen after the ATT. In this mode it rang on the first ring tone 5 times out of 5 tries which is 100% of the time. I have learned that the calling party will hear up to 4 ring tones when placing a call on the ATT network. If the ring tone changes volume slightly before the 4th ring then and only then will the cell phone start to ring. If the ring tone does not change after the 4th ring you get voice mail. If the calling party does not leave a voice message there is never a missed call displayed on the iphone. If the calling party does leave a voice message a few minutes later the iphone dings for arriving voice mail but still no missed call indication.
This appears to be related to the time of day and the ATT tower that the receiving caller is using. Tried other towers and it works in 3G mode 10 times out of 10 tries. Apple replaced the first iphone 4 with a new phone, no improvement. ATT replaced the SIM card and no improvement. ATT so far is clue less. This has been going on every since we got the new iphones which is 4 months. The ATT web site also describes this same problem from several years ago. Has anyone got better information?
Thanks -
I have a motorola H17 bluetooth it is paired to iphone 4s. The icon shows that it is connected. When making a call i tap the speaker icon and the bluetooth icon is not there. The motorola H17 tells me i am connected and the battery life when turned on. Any advice? Thank you in advance
here is an interesting thing: take the iphone and set lock screen to never. Now make an email with siri--be sure to activate her with call button. get to the body and get some text in there. then just stop talking. LOCK SCREEN APPEARS!!!!!! and of course you draft is gone.
There does seem to be a work around for some--maybe all these issues. Don't use the call button--use the buttons on the phone.
Siri seems to behave properly with scenerio above---sans call button. She does not go to lock. -
Why doesn´t music stop playing when making a call?
Why doesn´t music stop playing when making a call?
Shouldn´t that be automatic like it used to be in iOS6?Ok, I just realised that this only happens if the current page in iBooks has a video on it. If the page has only text and images, there is no problem.
I still think it is a bug though. If the video is not running, I don't see why the music player should be stopped. If I choose to start the video on the page, THEN the music player should be stopped. -
Frequently faced errors when making code as unicode enabled document
Hi ALL,
Does any have frequently faced errors when making code as unicode enabled document
please forward it to
[email protected]
thanks
SuchitraWS_DOWNLOAD and WS_UPLOAD function calls will need to be replaced with GUI_UPLOAD and GUI_DOWNLOAD or the assocaited methods of the class CL_GUI_FRONTEND_SERVICES. Also, some syntax changes to some statements, like OPEN DATASET will need the ENCODING extension.
Regards,
Rich HEilman
Maybe you are looking for
-
dowloaded the ios6 on my ipad2...and would like to use Siri...how do I proceed
-
V_T510 and infotype 0008
When updating V_T510 how can i have delimited (automatically) the infotype 0008 for the begin date i have in V_T510 ? Thanks MColaço - Somincor Portugal
-
Make UDF Read-only for all users
Hi Can i use any script to make a UDF read-only for all users? i am looking at CPRF and CUFD Tables thanks
-
I've got Logic Pro 7.3, and I've never had to create a rewire track before. Now that I've tried, I'm simply met with the message "No more tracks available". This is not different when I create a new project or start up an old one. Has anyone met this
-
IMAP accounts locked out - small triangle lock error symbol
I use Apple Mail to read several Gmail IMAP accounts. Mostly, it works fine. I've used Gmail IMAP since IMAP was offered. Every so often, one or more of the accounts will lock out. Apple Mail will display a small upward pointing triangle error symbol