Error when manually entering responses

When I manually enter responses, I am able to enter information into most fields. The only ones I am having a problem with are the 4 checkboxes that I have marked as required. I receive the error "This value does not match this column's type. Please enter a checkbox." there is not a box to click in and I'm not sure how to insert one. I have entered an X in the image below to recreate the error...hoping someone can help. Thanks.

Have you tried cutting and pasting from cell that already have the data you want in them? If this doesn't work can you please share your form with me as a co-author and I'll take a look. [email protected]
Andrew

Similar Messages

Error in consuming webservice in SE80 - SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION)

Dear Gurus,
Hope you all are fine. I am consuming 2 external WSDL's in ABAP (SE80 - Service Consumer). These are working fine in SAP DEV server. But when i execute tham in SAP QAS server, i am getting this error.
(SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION))
can anybody tell whet could be the problem?
Thanks

Dear Inaki,
These proxies are working fine in DEV server. I transported them in QAS and tried to execute but getting that error. Networking team say that SAP and other servers can free communicate to each other.
Regards

SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_SSL_ERROR")

Hello all,
can you pls suggest me smth for this:
I am running solman_setup and at phase 5.1 (Configure Web dispatcher) and I have errors:
SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_SSL_ERROR")
L3 - Failed to reach test WS through System Settings (ICM/HTTPURLLOC)
L2 - Failed to reach test WS through ICM
I choosed: No SAP Web Dispatcher used
What I did:
1. re-created users SM_EXTERN_WS and SM_INTERN_WS
2. added table HTTPURLLOC with the full hostname and the port
3. created SSL server standard certificate in STRUST and its green
4. instance profile>>add login/accept_sso2_ticket=1 and login/create_sso2_ticket=2
Thx for any suggestion
Chris

Hello,
I read note 1094342 - ICM trace contains verification of the server's certificate
and I installed in the IE browser the PSE saved from /strust
Thx for any idea
[Thr 140736729089792] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL[Thr 140736729089792] session uses PSE file "/usr/sap/SID/DVEBMGS00/sec/SAPSSLA.pse"[Thr 140736729089792] SecudeSSL_SessionStart: SSL_connect() failed[Thr 140736729089792] secude_error 536872221 (0x2000051d) = "SSLAPI error"[Thr 140736731203328] NiIBlockMode: set blockmode for hdl 92 FALSE[Thr 140736729089792] >> Begin of Secude-SSL Errorstack >>[Thr 140736729089792] 0x2000051dSAPCRYPTOLIB SSL_connect[Thr 140736729089792] SSL API error[Thr 140736729089792] Failed to verify peer certificate. Peer not trusted.
][Thr 140736729089792] << End of Secude-SSL Errorstack[Thr 140736731203328] NiIBlockMode: set blockmode for hdl 92 TRUE[Thr 140736729089792] SSL_get_state() returned 0x00002131 "SSLv3 read server certificate B"[Thr 140736731203328] SSL_get_state() returned 0x00001180 "SSLv3 read client certificate A"[Thr 140736731203328] *** ERROR during SecudeSSL_SessionStart() from SSL_accept()==SSL_ERROR_SSL[Thr 140736731203328] session uses PSE file "/usr/sap/SID/DVEBMGS00/sec/SAPSSLS.pse"[Thr 140736731203328] SecudeSSL_SessionStart: SSL_accept() failed[Thr 140736731203328] secude_error 536875078 (0x20001046) = "SSL API error"[Thr 140736729089792] No certificate request received from Server[Thr 140736731203328] >> Begin of Secude-SSL Errorstack >>[Thr 140736731203328] 0x20001046SAPCRYPTOLIB SSL_accept[Thr 140736731203328] SSL API error[Thr 140736731203328] received a fatal SSLv3 certificate unknown alert message from the peer[Thr 140736731203328] 0xa0600263 SSL ssl23_accept[Thr 140736731203328] received a fatal SSLv3 certificate unknown alert message from the peer[Thr 140736731203328] 0xa0600263 SSL ssl3_read_bytes[Thr 140736731203328] received a fatal SSLv3 certificate unknown alert message from the peer[Thr 140736731203328] << End of Secude-SSL Errorstack[Thr 140736731203328] <<- ERROR: SapSSLSessionStart(sssl_hdl=1315bf0)==SSSLERR_SSL_ACCEPT[Thr 140736731203328] <<- SapSSLErrorName()==SSSLERR_SSL_ACCEPT[Thr 140736729089792] <<- ERROR: SapSSLSessionStart(sssl_hdl=7fffcc023860)==SSSLERR_PEER_CERT_UNTRUSTED[Thr 140736729089792] <<- SapSSLErrorName()==SSSLERR_PEER_CERT_UNTRUSTED[Thr 140736731203328] *** ERROR => IcmConnInitServerSSL: SapSSLSessionStart returned (-56): SSSLERR_SSL_ACCEPT [icxxconn_mt. 1713][Thr 140736729089792] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-102): SSSLERR_PEER_CERT_UNTRUSTED {000f3a6b} [icxxconn_mt.c 1989][Thr 140736731203328] <<- SapSSLSessionDone()==SAP_O_K[Thr 140736731203328] in: sssl_hdl = 1315bf0[Thr 140736731203328] ... ni_hdl = 92[Thr 140736731203328] NiICloseHandle: shutdown and close hdl 92/sock 41[Thr 140736729089792] <<- SapSSLSessionDone()==SAP_O_K[Thr 140736729089792] in: sssl_hdl = 7fffcc023860[Thr 140736729089792] ... ni_hdl = 223[Thr 140736729089792] IcmConnConnect(id=15/14955): free MPI request blocks[Thr 140736729089792] MPI<5909c>85#7 GetInbuf -1 21d220 1757 (1) -> MPI_EOS: End Of Stream

"ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED"

Hi all,
In SMICM all the services are showing active, when I tried to run the webservices the following is the error that I am getting, have looked at different solutions on sdn.
Also please find below the dev_icm file.
<?xml version="1.0" encoding="utf-8" ?>
- <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
- <asx:values>
<SYSTEMFAULT href="#o112" />
</asx:values>
- <asx:heap xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:abap="http://www.sap.com/abapxml/types/built-in" xmlns:cls="http://www.sap.com/abapxml/classes/global" xmlns:dic="http://www.sap.com/abapxml/types/dictionary">
- <cls:CX_AI_SYSTEM_FAULT id="o112">
- <CX_ROOT>
<TEXTID>F63AFF63DBE4BB4786A7F52CC4167145</TEXTID>
<PREVIOUS />
<KERNEL_ERRID />
- <INTERNAL_SOURCE_POS>
<PROGID>185</PROGID>
<CONTID>978</CONTID>
</INTERNAL_SOURCE_POS>
</CX_ROOT>
<CX_STATIC_CHECK />
- <CX_AI_SYSTEM_FAULT>
<CODECONTEXT>http://www.sap.com/xml_errorcodes</CODECONTEXT>
<CODE>SOAP:1.023</CODE>
<ERRORTEXT>SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION_FAILED")</ERRORTEXT>
<LANGUAGE />
</CX_AI_SYSTEM_FAULT>
</cls:CX_AI_SYSTEM_FAULT>
</asx:heap>
</asx:abap>
dev_icm:
trc file: "dev_icm", trc level: 1, release: "640"
sysno 00
sid CC5
systemid 560 (PC with Windows NT)
relno 6400
patchlevel 0
patchno 139
intno 20020600
make: multithreaded, Unicode
pid 5848
[Thr 5852] Thu Jan 15 23:09:17 2009
[Thr 5852] ICM running on: dlwsdv11
[Thr 5852] MtxInit: -2 0 0
[Thr 5852] IcmInit: listening to admin port: 65000
[Thr 5852] DpSysAdmExtCreate: ABAP is active
[Thr 5852] DpShMCreate: sizeof(wp_adm)##10528#(1316)
[Thr 5852] DpShMCreate: sizeof(tm_adm)##2969176#(14772)
[Thr 5852] DpShMCreate: sizeof(wp_ca_adm)##24000#(80)
[Thr 5852] DpShMCreate: sizeof(appc_ca_adm)#8000#(80)
[Thr 5852] DpShMCreate: sizeof(comm_adm)##290000#(580)
[Thr 5852] DpShMCreate: sizeof(vmc_adm)##0#(424)
[Thr 5852] DpShMCreate: sizeof(wall_adm)##(38456/34360/64/184)
[Thr 5852] DpShMCreate: SHM_DP_ADM_KEY##(addr: 032C0040, size: 3381680)
[Thr 5852] DpShMCreate: allocated sys_adm at 032C0040
[Thr 5852] DpShMCreate: allocated wp_adm at 032C1B88
[Thr 5852] DpShMCreate: allocated tm_adm_list at 032C44A8
[Thr 5852] DpShMCreate: allocated tm_adm at 032C44D0
[Thr 5852] DpShMCreate: allocated wp_ca_adm at 03599328
[Thr 5852] DpShMCreate: allocated appc_ca_adm at 0359F0E8
[Thr 5852] DpShMCreate: allocated comm_adm_list at 035A1028
[Thr 5852] DpShMCreate: allocated comm_adm at 035A1040
[Thr 5852] DpShMCreate: allocated vmc_adm_list at 035E7D10
[Thr 5852] DpShMCreate: system runs without vmc_adm
[Thr 5852] DpShMCreate: allocated ca_info at 035E7D38
[Thr 5852] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
[Thr 5852] IcmCreateWorkerThreads: created worker thread 0
[Thr 5852] IcmCreateWorkerThreads: created worker thread 1
[Thr 5852] IcmCreateWorkerThreads: created worker thread 2
[Thr 5852] IcmCreateWorkerThreads: created worker thread 3
[Thr 5852] IcmCreateWorkerThreads: created worker thread 4
[Thr 5852] IcmCreateWorkerThreads: created worker thread 5
[Thr 5852] IcmCreateWorkerThreads: created worker thread 6
[Thr 5852] IcmCreateWorkerThreads: created worker thread 7
[Thr 5852] IcmCreateWorkerThreads: created worker thread 8
[Thr 5852] IcmCreateWorkerThreads: created worker thread 9
[Thr 5852] IcmCreateWorkerThreads: created worker thread 10
[Thr 5852] IcmCreateWorkerThreads: created worker thread 11
[Thr 5852] IcmCreateWorkerThreads: created worker thread 12
[Thr 5852] IcmCreateWorkerThreads: created worker thread 13
[Thr 5852] IcmCreateWorkerThreads: created worker thread 14
[Thr 5852] IcmCreateWorkerThreads: created worker thread 15
[Thr 5852] IcmCreateWorkerThreads: created worker thread 16
[Thr 5852] IcmCreateWorkerThreads: created worker thread 17
[Thr 5852] IcmCreateWorkerThreads: created worker thread 18
[Thr 5852] IcmCreateWorkerThreads: created worker thread 19
[Thr 5852] IcmCreateWorkerThreads: created worker thread 20
[Thr 5852] IcmCreateWorkerThreads: created worker thread 21
[Thr 5852] IcmCreateWorkerThreads: created worker thread 22
[Thr 5852] IcmCreateWorkerThreads: created worker thread 23
[Thr 5852] IcmCreateWorkerThreads: created worker thread 24
[Thr 5852] IcmCreateWorkerThreads: created worker thread 25
[Thr 5852] IcmCreateWorkerThreads: created worker thread 26
[Thr 5852] IcmCreateWorkerThreads: created worker thread 27
[Thr 5852] IcmCreateWorkerThreads: created worker thread 28
[Thr 5852] IcmCreateWorkerThreads: created worker thread 29
[Thr 5852] IcmCreateWorkerThreads: created worker thread 30
[Thr 5852] IcmCreateWorkerThreads: created worker thread 31
[Thr 5852] IcmCreateWorkerThreads: created worker thread 32
[Thr 5852] IcmCreateWorkerThreads: created worker thread 33
[Thr 5852] IcmCreateWorkerThreads: created worker thread 34
[Thr 5852] IcmCreateWorkerThreads: created worker thread 35
[Thr 5852] IcmCreateWorkerThreads: created worker thread 36
[Thr 5852] IcmCreateWorkerThreads: created worker thread 37
[Thr 5852] IcmCreateWorkerThreads: created worker thread 38
[Thr 5852] IcmCreateWorkerThreads: created worker thread 39
[Thr 5852] IcmCreateWorkerThreads: created worker thread 40
[Thr 5852] IcmCreateWorkerThreads: created worker thread 41
[Thr 5852] IcmCreateWorkerThreads: created worker thread 42
[Thr 5852] IcmCreateWorkerThreads: created worker thread 43
[Thr 5852] IcmCreateWorkerThreads: created worker thread 44
[Thr 5852] IcmCreateWorkerThreads: created worker thread 45
[Thr 5852] IcmCreateWorkerThreads: created worker thread 46
[Thr 5852] IcmCreateWorkerThreads: created worker thread 47
[Thr 5852] IcmCreateWorkerThreads: created worker thread 48
[Thr 5852] IcmCreateWorkerThreads: created worker thread 49
[Thr 4204] IcmWatchDogThread: watchdog started
[Thr 4248] ISC: created 400 MB disk cache.
[Thr 4248] ISC: created 50 MB memory cache.
[Thr 4248] HttpSubHandlerAdd: Added handler HttpCacheHandler(slot=0, flags=12293) for /:0
[Thr 4248] HttpSubHandlerAdd: Added handler HttpSAPR3Handler(slot=1, flags=4101) for /:0
[Thr 4248] HttpSubHandlerAdd: Added handler HttpJ2EEHandler(slot=2, flags=1077253) for /:0
[Thr 4248] Started service 1080 for protocol HTTP on host "dlwsdv11"(on all adapters) (processing timeout=60, keep_alive_timeout
[Thr 4248] =================================================
[Thr 4248] = SSL Initialization on PC with Windows NT
[Thr 4248] = (640_REL,Jul 16 2006,mt,ascii,SAP_UC/size_t/void* = 16/32/32)
[Thr 4248] SapISSLComposeFilename(): profile param "ssl/ssl_lib" = "D:\usr\sap\CC5\SYS\exe\run\sapcrypto.dll"
 resulting Filename = "D:\usr\sap\CC5\SYS\exe\run\sapcrypto.dll"
[Thr 4248] = found SAPCRYPTOLIB 5.5.5C pl24 (Jun 11 2008) MT-safe
[Thr 4248] = current UserID: I2\SAPServiceCC5
[Thr 4248] = found SECUDIR environment variable
[Thr 4248] = using SECUDIR=D:\usr\sap\CC5\DVEBMGS00\sec
[Thr 4248] = Success SapCryptoLib SSL ready!
[Thr 4248] =================================================
[Thr 4248] Started service 8443 for protocol HTTPS on host "dlwsdv11"(on all adapters) (processing timeout=60, keep_alive_timeou
[Thr 4248] Started service 1025 for protocol SMTP on host "dlwsdv11"(on all adapters) (processing timeout=60, keep_alive_timeout
[Thr 2464] MPI<4>1#3 Peak buffer usage: 1 (@ 64 KB)
[Thr 2112] MPI<5>2#3 Peak buffer usage: 2 (@ 64 KB)
[Thr 4248] Thu Jan 15 23:09:26 2009
[Thr 4248] *** WARNING => IcmNetCheck: NiAddrToHost(10.0.0.1) took 9 seconds [icxxtool.c 1065]
[Thr 4248] *** WARNING => IcmNetCheck: 1 possible network problems detected - please check the network/DNS settings [icxxtool.c
[Thr 200] Thu Jan 15 23:09:36 2009
[Thr 200] MPI<7>4#3 Peak buffer usage: 3 (@ 64 KB)
[Thr 4092] MPI<9>6#3 Peak buffer usage: 4 (@ 64 KB)
[Thr 1660] Thu Jan 15 23:09:40 2009
[Thr 1660] MPI8#3 Peak buffer usage: 6 (@ 64 KB)
[Thr 3168] Fri Jan 16 00:02:52 2009
[Thr 3168] *** WARNING => Connection request from (8/24/1) to host: 10.20.232.89, service: 4444 failed (NIECONN_PENDING)
RM-T8, U24, 600 AVISHNU, GX280I576YB1S, 00:02:47, M1, W1, SEU_, 3/2 [icxxconn.c 2121]
[Thr 3684] Fri Jan 16 00:04:40 2009
[Thr 3684] Deactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)
[Thr 3804] Fri Jan 16 00:04:56 2009
[Thr 3804] Deactivated service 8443 for protocol HTTPS on host: "dlwsdv11"(on all adapters) (timeout=30)
[Thr 2664] Fri Jan 16 00:09:26 2009
[Thr 2664] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c 2007]
[Thr 3516] Fri Jan 16 00:23:53 2009
[Thr 3516] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c 2007]
[Thr 4116] Fri Jan 16 00:26:53 2009
[Thr 4116] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c 2007]
[Thr 4112] Fri Jan 16 00:27:07 2009
[Thr 4112] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c 2007]
[Thr 1684] Fri Jan 16 00:34:23 2009
[Thr 1684] *** ERROR => IcmConnConnect: No service for protocol HTTP started [icxxconn.c 2007]
[Thr 3516] Fri Jan 16 00:46:52 2009
[Thr 3516] Reactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)
[Thr 3516] Reactivated service 8443 for protocol HTTPS on host: "dlwsdv11"(on all adapters) (timeout=30)
[Thr 3468] Fri Jan 16 01:29:23 2009
[Thr 3468] *** WARNING => Connection request from (9/25/0) to host: 10.20.232.89, service: 4444 failed (NIECONN_PENDING)
RM-T9, U25, 600 SRAJEEV, GX_XP2BASE:0, 01:29:18, M0, W0, SEU_, 2/2 [icxxconn.c 2121]
[Thr 1660] Fri Jan 16 02:00:47 2009
[Thr 1660] Deactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)
[Thr 196] Fri Jan 16 02:00:57 2009
[Thr 196] Reactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)
[Thr 2292] Fri Jan 16 02:13:41 2009
[Thr 2292] Deactivated service 1080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)
[Thr 4108] Fri Jan 16 02:14:05 2009
[Thr 4108] IcmChangeService: change service 1080 for HTTP to 8080
[Thr 4108] Reactivated service 8080 for protocol HTTP on host: "dlwsdv11"(on all adapters) (timeout=30)
[Thr 4208] Fri Jan 16 02:15:24 2009
[Thr 4208] *** WARNING => Connection request from (8/24/3) to host: 10.20.232.89, service: 4444 failed (NIECONN_PENDING)
Regards,
vishnu
Edited by: vishnuarigela on Jan 16, 2009 10:05 AM
Edited by: vishnuarigela on Jan 16, 2009 10:20 AM

Hi Olivier,
I know its been more than an year since the last time I have posted on this thread.
The problem still persists, I have made the necessary changes as you have suggested,
made the necessary changes to the logical port number.
The error has changed to no extended error message (SOAP_ESERVER).
In sm21:
SOAP Runtime: SOAP Runtime exception: 112 occurred in method XP_READ_TAG of class CL_SOAP_XP at position 1
SOAP Runtime: Exception message: no extended error message (SOAP_ESERVER)
dev_rfc:
ERROR 01:01:48: SOAP Application CL_SOAP_APPLICATION_CLIENT
IF_SOAP_APPLICATION_CS~EXECUTE_PROCESSING() A SOAP Runtime Core
Exception occurred in method XP_READ_TAG of class CL_SOAP_XP at
position id 1 with internal error id 112 and error text no
extended error message (SOAP_ESERVER) (fault location is 1 ).
Any suggestions would be greatly appreciated. I have looked up on sdn, however was
unable to find a solution.
I have opened another thread under Netweaver Administrator with the subject SOAP Exception,
I apologize if it was a mistake.
Regards,
Vishnu.
Edited by: vishnuarigela on Feb 11, 2010 9:36 AM
Edited by: vishnuarigela on Feb 11, 2010 9:37 AM
Edited by: vishnuarigela on Feb 11, 2010 9:38 AM
Edited by: vishnuarigela on Feb 11, 2010 11:46 AM

Display item description when manually entering a journal

Is it possible to display the item description when users enter and/or display a manual journal?
(it already has been discussed on this forum that one cannot display the item description easily in the master data list, I assume that my query will be the same, hopefully someone will tell us how to do it)

The item descriptions are included in the manual documents in release 6.0 (we have also enhancement package 3).
This is set in the dcoument type configuration in the tab labeled "document field options" in column "Name".

Getting an error when working with Responsive Design Output: MasterThemeSchema.xml

When generating a Responsive Design HTML 5 output, I'm getting this error: "MasterThemeSchema.xml file has invalid data." I am unable to access the manage layout features now to continue my customizations. I had imported a customized font before seeing this message. I'm moved the project to my harddrive, where the software is installed, and and still getting it (I know RH doesn't always do well on a network drive). Any ideas?

I searched this blog for similar posts and found posts that described similar issues. I ended up moving my RH project file to my local drive, deleting the masterthemeschema.xml, and replacing it with another masterthemeschema.xml from another project via Windows Explorer. I will recreate my customizations and hope for the best. Any ideas on what causes this corruption of the mastertheme schema files in the first place? Does this masterthemeschema.xml error only occur when working on a network drive and not local?

Error when new entering in combolist

hi all,
when i search in combolist using (post-change trigger) its work correctly first time. but when i delete the letters for new input the error frm-40735 raised.
i made the combolist a non-database item.
and the list has two triggers (1) post-change: for searching. (2) when list change: for retrieving data.
i'm using 10g on windows.
regards.

ora_pp wrote:
hi all,
when i search in combolist using (post-change trigger) its work correctly first time. but when i delete the letters for new input the error frm-40735 raised.
i made the combolist a non-database item.
and the list has two triggers (1) post-change: for searching. (2) when list change: for retrieving data.
i'm using 10g on windows.
You have design error
When-List-Changed :Fires when an end user selects a different element in a list item or de-selects the currently selected element. In addition, if a When-List-Changed trigger is attached to a combo box style list item, it fires each time the end user enters or modifies entered text.
Post-Change :Fires when any of the following conditions exist:
1. The Validate the Item process determines that an item is marked as Changed and is not NULL.
2. An operator returns a value into an item by making a selection from a list of values, and the item is not NULL.
Hopes this helps....

Error when manually adding user to project workspace

I am currently using Project Server 2010. I have a requirement for Business Users to have access to the project workspaces in Sharepoint but not be users of the PWA. Similar to as it is outlined in this Microsoft Documentation (http://technet.microsoft.com/en-us/library/cc197668(v=office.14).aspx)
There might be a circumstance where you want to grant people who are not members of the project access to the project workspace site. Anyone assigned to the Web Administrator group can create new users for a project workspace site. In addition to the
four groups that were mentioned earlier, there are four default SharePoint Server 2010 groups. They are as follows:
Full Control   Has all personal, site, and list permissions.
Design   Can edit lists, document libraries, and pages in the Web site.
Contribute   Can view pages and edit list items and documents.
Read   Can view pages, list items, and documents.
I have added the user to the Contributor group but when they try to contribute to the space, ie add documents or an issue/risk, they recieve an error, similar to as is documented in the following article (http://pwmather.wordpress.com/2011/07/11/manually-adding-users-to-project-workspace-project-site-in-projectserver-ps2010-ps2007-epm/)
What has been identified in this article makes sense.  I am just wondering why Microsoft documentation states that it can be done.
Any thoughts?

Chris,
The Microsoft article says, users who are not part of the project. It does not say not part of project server.
However, as far as I can remember, this scenario could work if the "Synchronization" is turned off between Project Server and Project Sites. I will run a test and confirm, later today.
Prasanna Adavi,PMP,MCTS,MCITP,MCT TWitter: @prasannaadavi Blog: http://www.prasannaadavi.com

Data network errors when manually switching from 3g to 2g

Hi everyone,
Apologies if this has been posted before but im running out of ideas! - Got my iphone 4 a couple of weeks ago and have noticed a rather irritating problem with it. For some reason, if i manually switch from 3g to 2g the data connection drops.. I get 'cannot activate cellular data network' errors and i have to toggle airplane mode on/off to reset the connection. Is this a network issue? - I live in London and am with Vodafone... Their tech support are useless as all they suggest is resetting the phone or getting it replaced. Its my third handset in 2 weeks and im getting close to calling it a day and sending the phone back to Apple. Anyone out there in a similar situation? - Advice??

Bump
So no-one has suffered this issue? - Not even fellow vodafone uk users?

Error when adding form responses in an existing response file

Following the announcement of the retirement of FormsCentral, I am testing Acrobat XI Pro to distribute PDF forms.
I followed the steps proposed in this tutorial: https://acrobatusers.com/tutorials/how-to-distribute-existing-pdf-forms
Everything works fine until I try to add the responses in an existing response file. I select the received files in the dialog box an when I clik on "OK" the progress bar appear then Acrobat Pro freezes.
I tried different forms, all exported from FormsCentral and still encouter this bug/issue.
Any hint?

These are the current privs for that user:
ALTER DATABASE
ALTER SESSION
ALTER USER
CREATE ANY CONTEXT
CREATE ANY DIRECTORY
CREATE CLUSTER
CREATE DATABASE LINK
CREATE DIMENSION
CREATE INDEXTYPE
CREATE JOB
CREATE LIBRARY
CREATE MATERIALIZED VIEW
CREATE OPERATOR
CREATE PROCEDURE
CREATE PUBLIC SYNONYM
CREATE ROLE
CREATE SEQUENCE
CREATE SYNONYM
CREATE TABLE
CREATE TABLESPACE
CREATE TRIGGER
CREATE TYPE
CREATE USER
CREATE VIEW
DROP ANY DIRECTORY
DROP PUBLIC SYNONYM
DROP TABLESPACE
DROP USER
EXECUTE ANY PROCEDURE
SELECT ANY DICTIONARY
SELECT ANY TABLE
UNLIMITED TABLESPACE

Error when manually selecting ship-to in sales orders

For my project, I've a scenario like this way:
1. enter transaction code VA01
2. enter order type ZPEA
3. press enter
4. enter sold-to number "1234"
5. press enter
6. deleted the defaulted ship-to number "1234"
7. enter ship-to number "5678"
8. press enter
9. information message "Check route for Ship-to party abc in document header" is displayed
10. press enter
11. Error message 'Ship-to party "5678" is not assigned to a sold-to party' is displayed
Now repeat steps 1. to 4. and make sure you do not press enter after entering the sold-to number
5. enter ship-to number "5678"
6. press enter
No error message is displayed if the data is entered in this sequence
Can you pls explain why the system behaves in a different way depending on the sequence in which the data is entered.
Thanks,
--Manoj
null

> Hi Manoj,
>
> Regarding SH- Irrespective of whether SH is assigned
> in SP master data it is possible to put any SH. SAP
> allows to put any SH in SP's Sales area..
>
> If u r getting errors while different data entry,
> check whether any USEREXIT has been used.
>
> Sam
> Hi Manoj,
>
> Regarding SH- Irrespective of whether SH is assigned
> in SP master data it is possible to put any SH. SAP
> allows to put any SH in SP's Sales area..
>
> If u r getting errors while different data entry,
> check whether any USEREXIT has been used.
>
> Sam
Thanks Sam,
This is same as my conclusion now.
But I may require a bit more help you on like how check for a user exit there in va01 screen?
Thanks,
--Manoj

Lost all contacts on ipad2 when manually entering new contact.

On a trip in May, I lost all contacts when entering new ones. I use Windows Live Mail and had to call and spend a long time with three different Apple techs in order to get the contacts back. I actually forgot about the problem and entered one new contact yesterday (on another trip) and lost ALL contacts again. I can't call for help until I return home because I have the name of the tech who solved my problem at home.
Here I am on another trip without any e-mail contacts. Why hasn't Apple updated the software and fixed this problem?

Okay...
I lost all my contact phone numbers for some reason when iSyncing with Motorola Raizor V3 or whaterver they call it. I have been searching the web for a solution and everyone seems to find the file AddressBook.data and AddressBook.data.previous and restore all back into normal. I, on the other side, cannot find these files. I got to <user>/Library/Application Support/Address Book and these files are not there! Why aren't they there??? I dont get it... everyone else finds them there.
Another solution I have found people doing is going to /Library/Application Support/SyncService/Backup Data and finding a folder there called Address Book that contains the data but NOT on my mac! I am not a Mac illiterate either.
I have a back up of some of the data but it is not very up to date. I lost all the phone numbers only. Weird. It doesnt make any sense! Thanks a lot iSync!
This is frustrating because I didn't not only lose ALL my numbers on my Address Book, I lost all my numbers on my cell phone too!
I am running Leopard 10.5.6.
Wanna hear something funny? I just found out my girlfriend is pregnant, I lost my job yesterday, the valet-parking driver crashed my car and I got robbed. And I am not even joking but it doesn't mean it's not funny because somehow, I find it all hysterical! Cheers -- gonna go for some icecream now.

Error when clicking Enter Button.

Hi,
I have a BSP page with one input field and one submit button.If i place the cursor on the Input field and click Enter button, Im getting the following error:

500 SAP Internal Server Error
Error message: Access not possible using 'NULL' object reference. ( type of termination: RABAX_STATE )
.
if i add one more input field im not getting any error msg...and it is fine.
Is it problem with one input field.
Rgds,
JBP

Raja,
Here is the code....
 Layout 

<%@page language="abap" %>
<%@extension name="htmlb" prefix="htmlb" %>
<htmlb:content design="design2003" >
<htmlb:page title="Overtime Entry " >
 
 <htmlb:form method="post" >
 
 <dd>
 <%
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_OUTPUT'
EXPORTING
input = takeover_id
IMPORTING
OUTPUT = takeover_id
 %>
 <dd>
 <htmlb:group id = "group1"
 design = "SAPCOLOR"
 bodyColor = " brown"
 width = "700" >
 <htmlb:groupHeader>
 <htmlb:textView text = "Take-over Role"
 design = "EMPHASIZED" />
 </htmlb:groupHeader>
 <htmlb:groupBody>
 
 <table>
 <col width="150"></col>
 <col width="300"></col>
 <tr>
 <td>
 <htmlb:textView text="Take-over Personnel Number: " />
 <htmlb:inputField id = "takeover_id"
 size = "10"
 value = "<%= takeover_id %>"
 submitOnEnter="TRUE" />
 <htmlb:image src = "help.jpg"
 id = "show_emp"
 onClick = "myClickHandler" />
 </td>
 </tr>
 <tr><td>
 
 </td></tr>
 <tr><td>
 <htmlb:button id = "submit"
 text = "Submit"
 onClick = "myClickHandler"
 design = "emphasized" />
 </td></tr>
 </table>
 </htmlb:groupBody>
 </htmlb:group>
 </htmlb:form>
</htmlb:page>
</htmlb:content>

Rgds,
JBP.

TS1398 I am getting when manually entering wifi info of "Could not scan for wireless networks" wireless is working on other devices, how do I cure this? The problem only began when I updated software on the phone. Previously I had no problems with wifi.

After updating software on Iphone (wifi worked fine before the software update) I now can not get on wifi. The phone with not find a working wifi network nor can I connect manually. Wifi is working on other devices. I have turned the phone on and off, turned the wifi router on and off and reset the iphone and down loaded updated software to the phone. Nothing has worked. Does anyone have an answer for this problem?

Could this be the problem?
iPhone 4 Modem Firmware : 3.0.04
iPhone 4S Modem Firmware : 2.0.10
Wifi is working on my iPhone 4, NOT on 4S -
Why is my new 4S I got yesterday using a 2.0.10 firmware, isn't that old?! Isn't the newest 4.0+?
I am so tired of trying to figure this out.
The Wi-Fi addresses in the About settings are different on both phones too.

Errors when entering responses manually

I have been encountering an error, when manually entering responses to an existing (and open) Form in Adobe FormCentral.
We are currently collecting registrations for an annual event, and the majority of people register online (via the form). However, less than a quarter of all of the participants still use snail mail for registration. This is not a problem, it just means we have to enter them manually.
My coworker has been entering them, and has had a number of issues. She was clicking to 'Add a Row' and then typing the information in. This worked for awhile, but has sinced caused a number of issues. For instance, she will click on the first field and start typing and the information will be visible, but then it will go blank when she clicks to enter the next field. We have tried to 'Clear Formatting' and deleting cell contents, but it just seems like there is something wrong in the program. She has stopped clicking 'Add a Row' and instead has just resorted to hitting return from the last field, which allows her to add a new row, in which she has to clear formatting before it will accept any content being added.
This adds an extra step, which is slowing down the process considerably.
In addition, when she is entering in longer information, if she pauses, it will automatically clear the contents of the cell. So, if she starts typing 123 Longwood Blvd, but pauses to double check spelling or the number, it disappears. She is frustrated to say the least! Is there a setting to change how long you can be active in a cell? Is there a field, much like the formula bar in Excel, where you can type the content in instead?
Is there something we are missing? I did a few searches, and didn't see anyone else with a similar error or issue, so I have decided to start my own. I thought it might be an issue with browser, but that doesn't seem to be the case.
Any thoughts and potential ways to fix these issues?
Thank you in advance!

Sorry about the problem.
Can you please share the form with me ([email protected]) so I can investigate.
Also can you tell me what OS/browser and Flash Player version are you using? To check Flash version you can use http://helpx.adobe.com/flash-player/kb/find-version-flash-player.html. If you don't use the latest one, please upgrade to see if helps.
Is there a setting to change how long you can be active in a cell? Is there a field, much like the formula bar in Excel, where you can type the content in instead?
No, we don't have such field, only in place editing allowed.
Thank you,
Roman

Error when manually entering responses

Similar Messages

Maybe you are looking for