Error when no production BOM exists for material in production order.
Experts,
I have materials with production BOM's and other materials without production BOM's.
When I create a production order, I get an error message (not blocking) that I don't have production BOM.
Can I configure my production order type in a way that a production BOM is optional?
Many thanks!
Jan
Hi,
Please cheeck with OPJB.
SPRO-> Shop floor control->Sytem modfications-> Define sytem message attributes.
As you can convert the meassages only defined here
SPRO ( Production > Basic Data> BOM > General Data > Change Message Type .
Or
Goto SE91; press F4; select SAP Applications as PP and find all messages under it
Regards,
R.Brahmankar
Similar Messages
-
Error when creating a STO DEL for material
I am trying to find the reason why when my client creates a STODEL itgives them the error message "Not Possible to determine shipping data for material" The Material type is Raw Material (ROH). The gentlemen before me said he implemented note note 335504 in QA1, however this did not correct the problem. In my experience I thought the Sales view needed to be set up in the material master. So I extended those views. I have also added loading and transportation group in the material master. I still get the same error. Is there anyone that could please provide me some advice as to where to go from here? Have I missed something?
I will reward points for helpful answers. Thanks in advanceHi
Have you extended material to both plants?
regards
Srinivas -
Please maintain the master data for material during product cost collector
hi
i get a error
please maintain the master data for material during product cost collector
please guide me
regards
leoHi Leo,
Can you elaborate your issue, like when did you get the error exactly?
If it is the error you got while creating Product Cost Collector, then this is not the right Forum to post.
Please post your question in the 'ERP Manufacturing (PP)' forum
Regards,
Manimaran M -
I am trying to open a .indd file. I am running Adobe InDesign CS5. I got an error that plugins need to be updated. When I try to install the updates, I get the error that says: "Error "This serial number is not for a qualifying product..." when installing an upgrade or upsell..."
Can someone please help me with what I need to do to be able to open .indd files?
Thanks,
NickThose files were created in a later version of InDesign. Have the person that created them save them back via IDML or you’ll need to upgrade.
-
Valuation type Not Exist for Material
Dear Experts
Whenever i Doing Manual posting of GR/IR through MR11 And In that case some of them Material is Showing the Error No Valuatiuon Type Exist for the Material.
No valuation type exists for material
Rgds
Pankaj AgarwalCKMLGRIR024
Short Text
No valuation type exists for material &
Diagnosis
You are trying to post to material (). This material is subject to split valuation according to valuation type (valuation type = ). It was not possible to determine a valuation type for the posted operations.
System Response
The posting will not be accepted as a valuation type can not be found.
Procedure
Check which valuation type the GR/IR clearing account maintenance should post the balance to. The valuation type must be created before the GR/IR clearing account maintenance posting is made.
You can either:
*Post the goods receipt with reference to this order, enter the valuation type and then execute the GR/IR clearing account maintenance again.
or
Reverse the Invoice(s) that have led to this balance in the GR/IR account.* -
Error when creating link to documents from material
Hi all,
while creating the purchase order the error message "Error when creating link to documents from material 61260224060" is displayed.
why this error message is displayed.?
Regards,
GaneshRajaHello Ganesh
Please check material master - view 'Bases data 2'.
There is checkbox 'No link'. You can activate this checkbox if you are not storing any drawing/designe docuemnt for this material.
Try to do this and check out again.....
If this helps you in resolving your issue, i would appreciate if you reward the answer with suitable points.
Best Regards
Avinash -
Error when writing to interface table for HR
We recently did a client copy from Production to our User Testing client. User was trying to enter time via transaction CAT2 but received the following message when attempting to save the timesheet:
"Error when writing to interface table for HR"
Does anyone have advice on how to resolve this issue?
Thanks as always!Hi,
We have the same problem.
We tried to add many records to HR via a job but it result with en error message LR036 (Error when writing to interface table for HR)
Did you find a solution since your problem appear ? -
Error when reading the DDIC-data for table
Hi Tobias
We upgraded from DMIS 2011 SP04 to SP07. We are in development system.
To test initial load, we stopped replication for an existing table and then started replication for the same table.
Mass transfer id connects ECC system to BW on HANA system.
Replication errored with the following message:
Error when reading the ddic-data for table MARD (RFC destination DWACLNT010).
Looking for your guidance.
Kind Regards
Kamaljit VilkhooWas able to solve using oss note 1972533.
-
Getting the below error when running the Baseline.grf for the first time
I am getting the below error when running the Baseline.grf for the first time.
Appreciate your support in resolving it.
Error below:
INFO [main] - *** CloverETL framework/transformation graph, (c) 2002-2012 Javlin a.s, released under GNU Lesser General Public License ***
INFO [main] - Running with CloverETL library version 3.2.1 build#63 compiled 04/01/2012 12:53:21
INFO [main] - Running on 4 CPU(s), OS Windows 7, architecture amd64, Java version 1.6.0_20, max available memory for JVM 901120 KB
INFO [main] - Loading default properties from: defaultProperties
INFO [main] - Graph definition file: graph/Baseline.grf
INFO [main] - Graph revision: 1.114 Modified by: mkressirer Modified: Thu Apr 12 13:27:18 EDT 2012
INFO [main] - Checking graph configuration...
INFO [main] - Graph configuration is valid.
INFO [main] - Graph initialization (Baseline)
INFO [main] - [Clover] Initializing phase: 0
INFO [main] - [Clover] phase: 0 initialized successfully.
INFO [main] - register MBean with name:org.jetel.graph.runtime:type=CLOVERJMX_1306871483270_0
INFO [WatchDog] - Starting up all nodes in phase [0]
INFO [WatchDog] - Successfully started all nodes in phase!
INFO [RUN_GRAPH1_0] - Running graph ./graph/InitDataStore.grf in the same instance.
INFO [RUN_GRAPH1_0] - Checking graph configuration...
INFO [RUN_GRAPH1_0] - Graph configuration is valid.
INFO [RUN_GRAPH1_0] - Graph initialization (InitDataStore)
INFO [RUN_GRAPH1_0] - [Clover] Initializing phase: 0
WARN [RUN_GRAPH1_0] - WS messenger cleanup failed.
java.lang.NullPointerException
at org.apache.axis2.client.Stub.cleanup(Stub.java:134)
at com.opensys.cloveretl.component.WebServiceClient.free(Unknown Source)
at org.jetel.graph.Phase.free(Phase.java:487)
at org.jetel.graph.TransformationGraph.freeResources(TransformationGraph.java:681)
at org.jetel.graph.TransformationGraph.free(TransformationGraph.java:955)
at org.jetel.graph.runtime.PrimitiveAuthorityProxy.executeGraph(PrimitiveAuthorityProxy.java:149)
at org.jetel.component.RunGraph.runGraphThisInstance(RunGraph.java:511)
at org.jetel.component.RunGraph.runSingleGraph(RunGraph.java:409)
at org.jetel.component.RunGraph.execute(RunGraph.java:302)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
WARN [RUN_GRAPH1_0] - Some graphs wasn't executed (because graph "./graph/InitDataStore.grf" finished with error).
WARN [RUN_GRAPH1_0] - Some graph(s) finished with error.
ERROR [WatchDog] - Graph execution finished with error
ERROR [WatchDog] - Node RUN_GRAPH1 finished with status: ERROR caused by: Graph './graph/InitDataStore.grf' failed!
ERROR [WatchDog] - Node RUN_GRAPH1 error details:
org.jetel.exception.JetelException: Graph './graph/InitDataStore.grf' failed!
at org.jetel.component.RunGraph.execute(RunGraph.java:324)
at org.jetel.graph.Node.run(Node.java:414)
at java.lang.Thread.run(Thread.java:619)
INFO [WatchDog] - [Clover] Post-execute phase finalization: 0
INFO [WatchDog] - [Clover] phase: 0 post-execute finalization successfully.
INFO [WatchDog] - Execution of phase [0] finished with error - elapsed time(sec): 2
ERROR [WatchDog] - !!! Phase finished with error - stopping graph run !!!
INFO [WatchDog] - -----------------------** Summary of Phases execution **---------------------
INFO [WatchDog] - Phase# Finished Status RunTime(sec) MemoryAllocation(KB)
INFO [WatchDog] - 0 ERROR 2 20132
INFO [WatchDog] - ------------------------------** End of Summary **---------------------------
WARN [exNode_0_1306871483270_RUN_GRAPH1] - Attempt to unregister non-registered thread in the ContextProvider.
./graph/InitDataStore.grf: Execution of graph failed! Error during graph initialization: Phase 0 can't be initilized.
INFO [WatchDog] - WatchDog thread finished - total execution time: 2 (sec)
INFO [main] - Freeing graph resources.
ERROR [main] - Execution of graph failed !It can't find an Endeca specific class when running via the clover command line utility. Thus, the classpath being set in that shell script is not incorporating the .jar files where the endeca-specific classes are packaged. I would start by adding an line to see what your classpath is set to. There are actually already some lines of shell script in clover that you can uncomment to see what .jars are getting loaded:
#echo $CLOVER_LIB/*
for i in $CLOVER_LIB/*.jar $CLOVER_LIB/*.zip; do
LOCAL_CLASSPATH="$LOCAL_CLASSPATH:$i"
done;
#for i in `ls $CLOVER_LIB/*.jar`; do
#echo $i
#done;
You could also echo LOCAL_CLASSPATH to see what is getting set there. At the end of the day, you will need the endeca-specific jars to load which can be found here: /Endeca/Discovery/2.3.0/Integrator/plugins/com.endeca.latitude_1.0.0/*
HTH,
Dan
http://branchbird.com -
Error in LSMW while specifying file for Material Cassification and Info Rec
Hi Friends,
I'm getting an error in LSMW while specifying file for Material Cassification and Info Record using batch input method.
The error message i'm getting is:
"Length of physical file name 'R2R_33_PURCH_INFR_1_PIR_CREATE.lsmw.conv' cannot be longer than 30 characters
Message no. /SAPDMC/LSMW_OBJ_060049"
I tried changing the file name but that is not working out. Please help.
Thanks,
AmitHi,
Just try this,
Go to LSMW, Specify file option, use display/change (Ctrl+F1)
Select the converted data and double click, change the file name there,
You will be getting it as "'R2R_33_PURCH_INFR_1_PIR_CREATE"
Just trim this to "'R2R_33_PUR_INF_1_PIR_CRE" and try...
Regards
Merwyn -
Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?
I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?
-
Error : DB Mapping does not exist for the Host in iSetup
Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TEST
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
Thanks in advance,
Regards,
900076.900076 wrote:
Hi Experts,
We configured iSetup for migrating data from source to target, while configuring instance mapping has been completed successfully but while extracting data from source to target is showing below error :
Error : DB Mapping does not exist for the Host:<host name > with Two Task: TESTIs this the complete/exact error message?
EBS Version : 12.1.1 with 11.1.0.7 DB
OS : RHEL 5.3 x86_64
Any idea much Appreciated .
http://docs.oracle.com/cd/E18727_01/doc.121/e12899/toc.htm
http://docs.oracle.com/cd/E18727_01/doc.121/e15842/toc.htm
Thanks,
Hussein -
How to implement the search help exit to MM01 for Material by product hiera
Hi,
How to implement the search help exit to MM01 T-code for Material by product hierarchy,
but system default it gives the data from MVKE table, my client wants from MARA table,
i created the one Function Module, write this code in that FM.
IF CALLCONTROL-STEP EQ 'DISP'.
REFRESH RECORD_TAB.
SELECT * FROM MARA INTO TABLE RECORD_TAB
WHERE PRDHA =
ENDIF.
I Face the problem what variable i have to pass in WHERE CONDITION, FROM THE MM01 T-code.
is't require to IMPORT variable from MM01 program, what is that import variable, please give me the solution.
thanks to all.Hi there..
check my web blog on search help exit...
[Search help exit code|https://wiki.sdn.sap.com/wiki/x/du0] -
I get this error when downloading key not valid for use in specified state what do i do
i get this error when downloading key not valid for use in specified state what do i do
What is your operating system? What are you trying to download?
-
SAP Cloud For Customer : Code List Mapping For Material or Product
Hi Experts,
I wnat some information about the SAP cloud code list mapping.
If i want to replicate Material / Product from SAP ECC / SAP CRM to SAP cloud for customer then any code list mapping entry we need to maintain in cloud side?
Or
Any Code list mapping for Material or Product in Cloud?
If yes anyone have list with SAP ECC / SAP CRM table details?
Many Thanks
MithunHi Mithun,
Code list data type is available in SAP Cloud. As of my knowledge I trying to find is code list mapping is available or not.
Yes we can replicate exactly the same values in SAP Cloud that we see in the SAP ECC / SAP CRM. For this, We need to create custom 'Code list' for the required one you want and assign that code list data type name which you created in the previous step to the required element in the BO.
For creating the code list data type: Go the Solution Explorer, Right Click on the Solution name, Click on 'Add' and Click on "New Item', then Add new item window will open with Installed templates, you will see the list of templates select the code list data type. Give the name as per your requirement starting with Z, max length is 27 only. click next, in 2/3 step, here you can add the list of values you want, add description to them. after clicking on the finish. activate the solution. Go to the BO and for the required element add the name you provided in creating the Custom code list ( ZXxxxxCode ) . Save and activate the BO as well as the solution then update the metadata in the designer part and in date model also, In data model, bind the required root element which is on the left pane to the required BO element which are in the right pane. Click Save and activate here also after the changes are made. finally activate the solution. In the solution explorer Right click on the OIF ui component and click on preview, it will open in the browser, here you will find the custom list you created, for the required one which you added code list date type name for the element in the BO.
Mithun.. Sorry if I"m confusing you more on this. let me know is this solution enough for the requirement you are searching.
Best Regards
Bandhav
Maybe you are looking for
-
ITunes 11 - why no cover in title view and no infos in artist view???
Guys really, you keep messing up iTunes from version to version. I think I will finally move to Songbird or other software. Why do you always have to remove functions people use and like in iTunes. And this has a history!!! iTunes10 In iTunes 10 you
-
Unable to post data to a database via JDBC adapter in PI 7.1
Hello experts, The scenario I am trying to implement is Proxy -- to -- JDBC. Earlier it was assumed that the table has primary key and therefore I started with UPDATE_INSERT structure but later on we came to know that the table does not have any prim
-
Mad: Can't get wireless work either on boot or after resume: 3945ABG
lspci | grep Wireless 03:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) /etc/rc.conf # /etc/rc.conf - Main Configuration for Arch Linux # LOCALIZATION # LOCALE: available languages can be listed wi
-
Yahoo login page incorrect for sub accounts but not admin account.
Using: Windows Vista OS and Mozilla Firefox 4.0.1. BT Yahoo has a login page that allows the user to create a seal on the login page to help identify a valid website. I am th main account/admin and I have no issues; everything looks good and correct.
-
Why itune don't seen to rememberd the information i key in for the mp3
Anyone know how to fix this isssue When i add in the artist photo, details etc for the "get info" for my mp3, my apple itune don't remembered the details when i remove the song and re-add it. My Windows can save all the details i have input but the a