Error when opening a Director .exe file

Hello - I'm a research assistant over at UCF and I'm having
some issues with director.
We have a simulation created for us a while back. We've been
using with no errors for the past couple of years. Recently our lab
acquired new computers. When we transferred our simulation over to
the new computer we get this error message.
"The instruction at "0x0ebb37fa" referenced memory at
"0x0ee60eb8". The memory could not be "read".
Does anyone have any idea on how to fix this?
Thank you kindly.

Hi Lord Acoustic,
I assume the simulation was developed with an older version
of director, and worked under an older system (e.g. Win98 or 2k).
Your new computers come with Vista, right?
Go to the developer, tell him to recompile the simulation
with a new version of Director for your new os, and it should work.
He might have to charge you for changes to the code.
Noone else but the developer can do anything. And only when
he still has the source files (x.dir).
You can try to run the software in a virtual machine, that
might work.
HTH,
Udo

Similar Messages

  • InDesign CS3 crashes without error when opening any 2nd InDesign file

    Issue: InDesign CS3 crashes without error and remains resident in memory if we have an InDesign file open and attempt to open a second InDesign file.
    OS: Win XP SP2
    InDesign Version: 5.0.2
    Hardware: Dell Precision WorkStation T3400, 4 gigabytes of memory, Intel Core2 Quad processor Q6600
    Details: No messages in the event viewer about the problem. We renamed the InDesign Defaults and the InDesign Saved Data file. We removed Creative Suite, restarted and then reinstalled Creative Suite (I could not remove and reinstall InDesign individually). We have created a new Windows profile for this user. I have one computer having the trouble. Other InDesign installations are working fine. This computer has 559 files in C:\windows\fonts. Other people that are not having the problem have a larger number of fonts installed.
    The issue is not file specific. We are not running out of memory as I checked the task manager after the first InDesign document is open.
    Why is opening a second document different than opening the first document?

    Hello Peter and Josh,
    I'd just like to assert that I am having the exact same problem as Josh. I've spent the time to go through the steps listed above and have found the same results.
    The issue as we see it multiple times daily is as follows:
    (1) User opens File1 (everything works fine)
    (2) User goes to open File2 (via explorer or via file->open) or print File1
    (3) The User Interface for ID disappears (InDesign.exe still appears in Task Manager and is NOT listed as "Not Responding", ID does not appear in the Task Bar)
    (4) The only way to continue work is to End Task/End Process InDesign.exe and relaunch.
    No error messages appear, no error logs are created(that I can find). Non-related concerns caused us to upgrade this users PC. With a completely new install we are still having the problems. The systems are listed as follows:
    OS: Win XP SP2 (fully updated minus SP3)
    InDesign Version: 5.0.2
    Newest Hardware: Custom Built Computer, 4GB RAM installed (3.24 recognized by windows), Intel Core2 Quad processor Q6600 @ 2.4Ghz
    OS: Win XP SP2 (fully updated minus SP3)
    InDesign Version: 5.0.2
    Older Hardware: Custom Built Computer, Intel D945GTP Motherboard, 2GB RAM installed, Intel Pentium D processor @ 2.8Ghz
    Troubleshooting:
    (1) Alt+Space and M then using arrow keys moves every other window the user had opened other than In-Design. The user has two monitors. (a) 1280x1024 and (b) 1200x1600 (yes she uses the monitor rotated 90 degrees
    (2) Log files - Non exist in the C:\Program Files\Adobe\Adobe InDesign CS3 folder. I've also done a search across the entire hard drive for any "*.log" files, none of which were adobe related.
    (3) Default Printer - Changing the default printer to Adobe PDF is not really an option. I was able to convince the user to temporarily switch to a different networked printer and await the results (most likely today or tomorrow it should recreate)
    (4) /3GB switch - Getting that last 700 something MB of memory isn't an issue. I've run MemTest.exe on all the available system memory overnight in a "burn in" test. The system ran fine the sticks were nice and warm when I got in from all the hard work :)
    (5) Order of Opening - The problem repeates regardless of order. The trick seems to be opening File2 or printing File1 (I had the user only work on one file at a time (required her to close any open files before opening the next, that wasn't fun for my user but the system didn't crash on opening in this scenario, just on printing. Obviously not a permanent work around)
    Any help here would be much appreciated as this has been plaguing us for months now.

  • Error when opening down loaded dmg file

    I have tried 4 times at different times of the day today and the .dmg file that I double click to load comes with an error box the following disk images couldnot be opened    - DesignStandard CS6 (Reason) Not Reconized.
    File sizes I have one ending in .dmg.part (3.79 GB) and a other .dmg (3.78 GB both file I get the same error as above
    Machines:
    Power Mac 10.6.8 16GB 2 x 2.66 GHz (12 core)
    Power Book 10.6.8 16GB 2.2 intel core

    Its the full version purshased I get no errors when down loading I get the icon on the down loaded file as I do on all dmg files from the web (could I pay for the posts/boxed version)
    I have just tried again this morning and its worked !!

  • Error when opening a VO xml file

    I am starting to look at using the framework extension capability for some changes to the Oracle Sourcing module.
    I have used an enhanced version of Luke's script to generate my server.xml files. I have successfully loaded these into my project in Jdeveloper. However I am having a problem with one of the View Object XMl files.
    When I try to edit the view object (just to have a look at it) I get an error in Jdeveloper that indicates that the XML is invalid.
    the file is in $JAVA_TOP/oracle/apps/pon/negotiation/creation/server/AuctionHeadersAllVO.xml
    I am not sure whether it is a problem with the file or that the version of jdeveloper I have is bad. I cant find the jbo_03_01.dtd so that I can try and validate the file myself. I just cant find the DTD anywhere. I found that the dtd lives in the file jbomt.zip but thats not on my PC. I found a version of the zip file and got the dtd's but they dont validate against any of my VO files.
    So I am going in circles. Anyone been here before?

    I am trying to extend a page in the Sourcing application. I know that I want to extend the page ponDefineHdrPG.xml. I know that this is held in MDS. Looking at the page properties I can see it is based on the VO AuctionHeadersAllVO. I know that these are not held in the MDS but I got them from the $JAVA_TOP directory.
    Following Luke's notes I generated my server.xml files because theye were not shipped with the sourcing application.
    My understanding is that I need to use these server.xml files to open my BC4J package. It is here I am getting problems. I cant ignore the problem because I cant create the VO extension because the VO I am basing it on has problems.
    I have followed all the examples and reviewed all the training doco. I just cant seem to get anything going here. I have logged tars with support but still getting nowhere.
    I just want to add a couple of fields to the main page but am stuck at the first hurdle.

  • Win32 exception error when opening file from RH6 in RH7

    I received the following error when opening a help file
    (.xpj) that was developed in RoboHelp 6 in RoboHelp 7:
    An unhandled win32 exception error occurred in RoboHTML.exe
    [4692].
    This occurred after receiving the notice to upgrade the
    project since it was created in an older version. After selecting
    Upgrade, I received a runtime error message prompt. After clicking
    OK, I received the message above.
    Does anyone know how to resolve this issue so that I can open
    the project without any problems in RH 7?

    Thanks a lot for replying.
    waldemar.hersacher wrote:
    I have Acrobat Reader 5.1 at home and 6 at work and both work fine with the LV 7.1.1 bookshelf and help file.
    Yep, I just uninstalled Adobe Reader 7.0 and installed version 6.0.1. The links now work perfectly, so evidently this is a problem with Adobe Reader 7.0. I'd still like to solve the problem, though, as I really like version 7.0. (Something has finally been done about the program's lengthy start-up time!)
    You can reach the PDF-Files also by using Help>>Search the LabVIEW Bookshelf. Does this link work for you?
    It works perfectly.
    javascript:AcrobatLink('../manuals/lvuser.pdf');
    This is a call to a java script function located in pdf.js.
    Other reasons:
    The Active-X control of Reader 7 has a bug.
    Your Internet security settings will not allow this operation. The Active-X will be loaded but will have no access to the file and yo get a wrong error message.
    Fair enough. If that is indeed the case, which Internet security setting should I try changing? I haven't done anything unusual to any of those settings. And where is pdf.js located? I tried searching for it but could not find it.
    Your advice is greatly apreciated.

  • Error when opening table container file keydb read only

    Hi Guys,
    We are installing solution manager 4.0 on windows/sql but we are getting following error and couldnt continue the installation
    FKD-00070  Error when opening table container file C:\PROGRA1\SAPINS1\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml for writing. Possible reason: "read-only"
    ERROR 2008-06-04 20:10:56.843
    FKD-00049  XML - Parser error: error: no DTD specified, can't validate in line 1, 1
    in file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml.
    Please help
    Regards,
    Santosh

    Further info
    keydb.xml is empty and the directory has got write access for everyone
    regards
    Edited by: Santosh Keerti on Jun 4, 2008 1:29 PM

  • Error when opening file; see image for details

    I receive the following error when opening an ai file that was emailed to me.

    sk the sender to ZIP the file before sending and then send again.

  • Error when opening itunes : iTunes has stopped working ''A problem caused the program to stop working correctly''. When I repaired damaged files the problem still exists and also after uninstalling and redownloading and installing itunes. I have windows 8

    Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
    When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
    My pc is working with windos 8.
    Is there a solution?

    Hey there Rodney274,
    It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
    http://support.apple.com/kb/ts1717
    Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
    Start iTunes in Safe Mode
    Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
    Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
    Click Continue.
    See if the issue you're experiencing persists in Safe Mode.
    If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • FM GUI_UPLOAD gives PC036 "Error when opening the download file".

    Dear all
    I'm having a problem with a particular PC.
    A program which calls FM GUI_UPLOAD gives the error PC036 "Error when opening the download file".
    The file we are trying to upload is a text file, with tab delimiter.
    If the same user executes the same program from another PCs, it works fine.
    If another user executes the program in the "problematic" PC, it gives the error.
    So, the problem is PC-related.
    I checked SAP GUI Codepage, and was the same as other PCs.
    I cheched regional configuration, and was also the same as other PCs.
    The operating  system is Windows XP, and the SAP GUI version is 7.10,  File version 7100.2.7.3077, Build 967944 , Patch level 7.
    SAP version is ECC6.
    I searched across forums, SAP note, and the web, but I couldn't find anything.
    I would be grateful if someone could give me ideas.
    Thanks in advance
    Jordi

    Hello. The user accounts are have same privilegies (like both are "Power users")? Also the file system are the same in both PC NTFS or FAT32 (today i'm find FAT32 in enterprise ) If NTFS may be some Domain politics are not allow to save file correctly, or space are not enough....Try check this first...Regards.

  • Get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script

    get error when installing .json back up file A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script
    Also tried to chang places.sql or what ever to my back up .json file and that wouldnt work. Is there a way to just move my backup .json file some where my bookmarks are a bigger file and i t will take a bit to upload.

    A script on this page may be busy, or it may have stopped responding. You can stop the script now, open the script in the debugger, or let the script continue.
    Script: chrome://browser/content/places/editBookmarkOverlay.js:909

  • Multiple JavaScript errors when opening aspx file in Dreamweaver

    I get multiple javascript errors when opening aspx file in Dreamweaver similar to... "While executing translateHyperLink in ExternalRenderers.htm, a JavaScript error occurred."

    Hi Steven,
    Not sure if this is related, but can  you try the solutions in Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
    Thanks,
    Preran

  • STMS: RFC error: Error when opening an RFC connection

    Hello ,
    I was wondering if you could help me with this TMS issue.
    The transport system is not working properly.
    The fallowing error is shown:
    Could not start transport control program tp
    RFC error: Error when opening an RFC connection
    There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
      Error code: 3
      RFC error text: Error when opening an RFC connection
    Meaning of the error codes:
      03  RFC system failure
      04  RFC communication failure
    System Response
    The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
    Procedure
    Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
    When I test the tp tools:
    tp Call and RFC Ping: Error when opening an RFC connection
    Another thing would be that when testing the RFC connection CALLTP_Linux I have the error:
    ERROR: user XXX  is not authorized to start TP /usr/sap/SID/DVEBMGS53/exe
    And I have to say that the user has maximum authorizations.
    I also checked the permissions of the tp at OS level but everything seems to be ok.
    Can you help me with this?
    BR,
    Manoliv

    Dear Manoliv,
    Firstly please check if you have enough space in /usr/sap/trans file system.
    If OK, please run RSTPTEST report from SE38 and check the log file in SMGW => Goto => Trace => Gateways => Display file
    and paste the log here.
    Also, I assume filesystem permissions are OK.
    Regards,
    Sujit.

  • There was a problem sending the command to the program when opening Microsoft Project 2010 files

    When opening MS Project 2010 files from the file and print server, I receive "There was a problem sending the command to the program."  Copy the same file to my local drive and the file opens fine.  This can be repeated by several other
    users.  Created a simple project file and once the size hit 1 MB, the error appeared.  The error appears on all files over 1 MB.
    I am a domain admin, so it is not a rights issue.  This does not seem to be a network latency issue, the file copies extremely fast.
    Any ideas?

    This message appears to be caused by Windows Explorer trying to send old-fashioned DDE messages to the Application.
    Since MS Project has no "Ignore DDE messages" setting you might want to go change the compatibility settings for WinProj.EXE (and any shortcut to it) to Windows 7 or greater.  Hopefully then Windows Explorer will stop trying to send DDE messages.
    Another possible culprit is older versions of the WinZip explorer extensions - I would disable them as well.
    Good luck,
       James.
    James Boman - http://www.boman.biz Software Consultant for IPMO - http://www.ipmo.com.au

  • Error When Opening Any Form

    Hi All.,
    Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
    Application:11.5.10.2
    OS-----------HP-UX
    DB-----------10.2.0.4.0
    File Name:
    oracle/forms/ui/FLWTextArea
    Work Around
    Relink the all the files
    Regenerated the jar files
    Regenerated the forms
    f60gen help=y
    Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
    Forms 6.0 (Form Compiler): Release - Production
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    PL/SQL Version 8.0.6.3.0 (Production)
    Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
    Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
    Oracle Multimedia Version 6.0.8.25.0 (Production)
    Oracle Tools Integration Version 6.0.8.17.0 (Production)
    Oracle Tools Common Area Version 6.0.5.32.0
    Oracle CORE Version 4.0.6.0.0 - Production
    Metalink Doc id
    java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

    Thanks,
    From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
    Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
    Here is an example:
    If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
    If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
    If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
    If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
    SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
    Enter value for bug_number: 9935935
    old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
    new 1: select bug_number from ad_bugs where bug_number='9935935'
    no rows selected
    SQL>

  • Error when trying to save a file

    I get this error when trying to save any file (newly created or not) word document in MS word 2010:"You are attempting to save a file type (plain text files) that has been blocked by your File Block settings in the Trust Center".
    I followed the directions given by the Microsoft Knowledge Base article 922850, but I am still having this issue. I can still save files as PDF but not in any kind of word format. 
    I also tried opening another file copy and pasting under a different name and it doesn't help.
    Please Help.
    Bruce

    Hi,
    Please try the following methods:
    Using Administrative Template files and the Office Customization Tool to disable the restriction
    Use a trusted location, or create an exempt location
    Quote from:
    http://support.microsoft.com/kb/922849/en-us
    Regards,
    George Zhao
    TechNet Community Support

Maybe you are looking for