Error when opening a query

Hi All,
I am trying to open a query in the Q(testing) system and it gives me a message saying "system is not set to changeable - objects are not changeable". How to resolve this and get back to editing my query.
Thanks,
Meher

Meher,
Your BWQ system is locked for changes.
The best practice is to create and modify queries only in the Development system and then transport the query to the consolidation and production environments.
Hope it helps,
Gili

Similar Messages

Error when opening Query Designer

I keep getting an error when I open up query designer and hit on open query. the error is bexopensaveservices -get nodes:RFC exception. any ideas on how to fix? Basis says my RFC connections are fine

Hi,
We are facing the same issue for Query Designer .When opening a query, we get the following error :"Terminate:Unexpected Error:BExOpenSaveServices - GetNodes:RFC Exception".
As usual, Basis folks say, RFC connections are fine.
Not sure of the main problem.Can any one tell me , whats the solution for the same.
FYI, I have SAP_ALL authorizations and I think, for my user id , authorization is not a problem.
Regards,
Kumar

System error in opening a query

hi guys,
this is the error i'm getting when opening this query which i need for my CR
Abort System error in program in SAPLRR12 and form cell_fuellen_acell-01
Diagnosis:
This internal error is a targeted termination since the program has an
incorrect status.
what is needed to be done here
Your help will be rightly appreciated
Thanks

Hi Vj,
Please check the SAP notes as below, which seems to be relevant for your issue.
Assign points it useful.....
Symptom
There are errors in Business Explorer components such as Analyzer, Browser, Form Reporting, Web Application Designer, Query Designer, Map, OLE DB for OLAP Provider
Solution General information
This note contains information about BW 3.0A front end patch 3. Here, you will find the most important information on:
Installation
Error corrections
New features
Additional general information that is not specifically for this BW front end patch.
Procedure
Downloading BW front end patches via FTP from sapserv
Downloading a BW front end patch via Online Correction Support (SAPnet)
Preparing the Installation Server
Checking the Installation Server
Installation on PC
Checking the PC
Problems during the installation of the BW front end Patch
Distributing a patch per script (for administrators only)
Installation
During the installation of the BW front end patch, note the following:
(This area is constantly updated)
The BW 3.0A front end patch 3 is based on the SAP GUI 6.10 Presentation CD 1 (6.10 Final Compilation 3, material number 50051811) and the SAP GUI 6.10 patch 12 or higher.
The BW 3.0A front end patch 3 contains all files, to convert a BW 2.0B/2.1C front end into a BW 3.0A front end.
The BW 3.0A front end is downward-compatible to BW 2.0B/2.C.Thus, it can also be used on BW 2.0B/2.1C backend systems.
When you use the Web Application Designer, implement at least BW 3.0A Support Package 03 (see note 425995).
Error corrections
This BW front end patch corrects the following errors in particular:
in SAP Business Explorer Analyzer
Displaying document links on filter cells and text elements
Improved performance for low-speed connections (WAN)
Bug:Incorrect language when starting documents in the Web browser (refer to note 450200)
Bug:Import of missing styles does not import the color palette anymore (refer to note 450194)
Bug:Various problems during the server logon as of Release 2.0 (incorrect list of Goto destinations, incorrectly indented hierarchy symbols...)
Bug: Starting jump destinations in the Web does not work
in BEx Query Designer
The system does not correctly interpret characteristics that were selected as being unique in each cell and when it checks these characteristics, it mistakenly reports them as being defined non-uniquely.
After you called the cell editor, you had to press the toolbar buttons twice to call the required function.
In the cell editor, you could change the formula cells but not the formulas of the columns or of the rows because the system displayed all references to other columns or rows as 25 digit numbers.
When you use Save as ... for queries with formula cells, these cells are not copied.
When you used the Save as ... function for queries with cells, the copied query sometimes displayed the message "Brain 299 SAPLRRI2 Form CELL_FUELLEN_ACELL-01-" when it was executed.
When you used the Save as ... function for queries with formula cells, these cells were not copied.
in Variable Editor
Formula variables that were replaced with the "To" value in intervals, were displayed without the "To" selection when you changed them.
in SAP Business Explorer Browser
Drag&Drop of Japanese file names on Japanese WinNT computers is now supported
Temporary files are automatically deleted when the BEx Browser is exited
New features
New features delivered with this BW front end patch:
SAP Business Explorer Analyzer
Delete function in dialog "Open -> Views"
Displaying documents for text elements and filter values
Now the BW front end is installed in a separate program folder in the start menu. The folder is called 'Business Explorer'.The setup only allows you to change the name of the folder of the SAP front end.
Procedure
1. Downloading the BW front end patch via FTP or SAPnet
2. Preparing and checking the installation server
3. Installing and checking on the PC
Note that you cannot install a BW front end patch directly on a PC (also see the 'Distribution of a patch by script' section).
The check of every step with SAPBEXC.XLA avoids unnecessary subsequent problems.
Downloading BW front end patches via FTP from sapserv
Downloading patches from the sapserv is described in note 96885, "Downloading a front end patch from SAPSERVx".
The BW 3.0A front end patches and the SAP GUI 6.10 patches are in the directory
   sapservX/general/frontend/patches/rel610/Windows/Win32
The file name of the BW front end patch is
   BW30A_n.EXE (where 'n' is the number of the BW front end patch)
The file name of the SAP GUI patch is
   GUI610_n.EXE (where 'n' is the number of the SAP GUI patch)
In general, you can use the highest existing SAP GUI patch.The above-mentioned number of the SAP GUI patch is the minimum requirement.
Downloading a BW front end patch via Online Correction Support (SAPnet)
You can also download BW front end patches in the SAPnet.The URL for the SAP Online Correction Support is:
   http://service.sap.com/swcenter-main
After you select SAP BW/SAP BW 3.0A/Binary Patches/SAP GUI for Windows 6.10/Win32 in the tree on the right side, the SAP Download Area appears on the left side.
Here you can select BW30A.EXE and, if necessary, GUI610.EXE for downloading.
In general, you can use the highest existing SAP GUI patch.The above-mentioned number of the SAP GUI patch is the minimum requirement.
Preparing the Installation Server
The installation of patches on the installation server is described in note 361222. Follow the instructions in this note.
A BW front end patch contains all files from the previous patches, so that you only need to install the latest patch.
Checking the Installation Server
Note 197460, "BW front end Checktool sapbexc.xla", describes how easily and quickly you can check the installation server.
Installation on PC
The BW front end patch is installed by executing the SAP GUI setup.In the setup, you must select the BW add-ons component to install the BW front end.
See also the section distribution of a patch per script.
Checking the PC
Note 197460, "BW front end Checktool sapbexc.xla", describes how simple and fast the local installation checks a PC
The local execution of SAPBEXC.XLA is necessary if you sent problems to the SAP Support (see note 142705).The status of a PC can be checked with the result of SAPBEXC.XLA.
Problems during the installation of the BW front end patch
If problems occur during the installation of the BW front end patches, you should install the BW front end patch again and use the following method for this:
First, remove the BW front end with "Remove" menu option under "SAP front end" from your local PC.
Afterwards you can install the front end programs again with the setup program of your setup server.The setup program has been delivered with the front end CD.You must have administrator rights on the local PC.During the setup, no other programs (for example, Excel) should run.
Certain programs save information on OLE components in special files.These files are not updated automatically during a new installation, therefore, when you change the OLE component during the installation, old information may remain in the system.We recommend you delete all files with the extensions ".EXD" and ".OCA" before you carry out the new installation.
Distributing a patch per script (for administrators only)
There is a large number of products for the distribution of software (for example, Microsoft SMS, IBM Tivoli, NetSupport NetInstall), so that no individual Support is possible when you use SAP and BW.There are two general notes about the front end installation (153341 and 194859), to which the system also refers.
The following remarks are intended for administrators who want to distribute a BW front end patch with such a software.
A BW front end patch consists of several files in different directories. These directories correspond to the directories on the installation server or on the CD.The files are usually distributed into the following directories on the local PC:
c:\program files\common files\sap\system
c:\program files\sappc
c:\winnt\system32 or c:\windows\system
In the sapbexc.xla file on the "Version" tab, there are notes about where the file must be copied to and whether it must be registered.
For the preparation of a script, first you should make a normal installation on a local PC from the installation server which must be checked with sapbexc.xla (see note 197460).Afterwards you can localize the corresponding directory of a file using this PC.In general, each DLL and each OCX must be registered if it can be registered.After the installation per script, a deinstallation may no longer work, therefore, before registering a file with regsvr32.exe <Path\File>, you should execute the script for an unregistration with regsvr32.exe /U <path\file>.
Currently, the sapbexc.xla checktool may not be able to recognize certain installation errors (copy without registrations) (see note 206609).
SAP offers support for problems with incorrect scripts for distributing patches.
Best Regards,
DMK
Assign Points if it helps....

Error When Opening the Setup/Transactions/ Sources Window

Hi All,
in Oracle E-Business Suite R12 Version
Error When Opening the Setup/Transactions/ Sources Window
APP-FND-01388: Cannot read value for profile option FND_DEVELOPER_MODE in routine &ROUTINE.
ORA-01403: no data found
FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502.

Amr,
Please see the suggested solutions in these docs.
App-Fnd-01388: Cannot Read Value For Profile Option Fnd_developer_mode In Routine [ID 563884.1]
R12: How To Avoid The Error Message APP-FND-01388 On Drilldown [ID 556668.1]
R12 APXINWKB Error APP-FND-01388 When Trying To Query Invoice [ID 864195.1]
APP-FND-01388 Cannot Read Profile Option FND_DEVELOPER_MODE In Benefits Service Center Form [ID 422182.1]
Thanks,
Hussein

Error when opening view object in Jdeveloper

Hi,
EBS version is 11.5.10 RUP4. JDeveloper version is 9.0.3, Business Component Version is 9.0.3.13.93.
We need to modify a custom view object that has been extended from a standard VO. We do not have the original Java file of the custom VO, only its classes VOImpl and VORowImpl. As such, this should not be a problem: instead of modifying the custom VO we could extend it.
The problem:
When trying to update/extend the custom VO we get an error:
Copy operation failed, some edits may not be cancellable
Expected name instead of <.
Exception in oracle.xml.parser.v2.XMLParseException
Tracing back the problem we got this same error when OPENING the original VO. The original VO is oracle.apps.asn.opportunity.server.OpptySearchVO
Any idea how we can solve this problem?
Thanks in advance.
Regards,
Radu

Radu,
What kind of change you are trying to do, If you are try to change only the query without adding any parameter, you can open the VO.xml in a text file and change it.
One more way is, create a new VO substitution with the same name, and extend the VO, then Copy the VOImpl and VORowImpl code into your new files and use it.
What is the Jdeveloper Version 9.0.3 or 9.0.3.5
What is the Build version for the Jdeveloper.
Thanks.
With Regards,
Kali.
OSSI.

HTTP_POST - Error when opening an RFC connection

Performing POST-query. Works well in simple program, and in WebDynpro application:
<i>Error when opening an RFC connection</i>
l_dest      = 'SAPHTTP'.
    CALL FUNCTION 'HTTP_POST'
      EXPORTING
       absolute_uri                       = l_uri
       rfc_destination                    = l_dest
       user                               = l_username
       password                           = l_password
       blankstocrlf                       = 'Y'
      REQUEST_ENTITY_BODY_LENGTH        =
      PROXY                             =
      PROXY_USER                        =
      PROXY_PASSWORD                    =
     IMPORTING
       status_code                        = l_status
       status_text                        = l_statustext
       response_entity_body_length        = l_rlength
      TABLES
       request_entity_body                = req_body
       request_headers                    = req_headers
       response_entity_body               = res_body
       response_headers                   = res_headers
     EXCEPTIONS
       connect_failed                    = 1
       timeout                           = 2
       internal_error                    = 3
       tcpip_error                       = 4
       system_failure                    = 5
       communication_failure             = 6
       OTHERS                            = 7
Edited by: S S on Nov 28, 2008 4:01 PM

You can't use SAPHTTP for the destination. This RFC destination uses the SAPGUI to make the HTTP call. Either use SAPHTTPA (the A stands for Application Server) or better yet use the newer CL_HTTP_CLIENT class. The class uses the ICM instead of a standalone executable to make HTTP calls.

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

Error message "Error when scheduling the query(JOB_CLOSE)".

Hi all,
While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
Could you please find what this error is?
Thanks,
Uday.

Hi Uday,
This problem can occur if you changed the query definition.
In this case the query definition would be inconsistent with the existing extract structure.
Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
to delete.
After this you could use the same table name for any further extract that you need to create.
One caution is that the extract table should not be deleted through any other transaction before you run the report.
Rgds,
Colum

Getting 500 Internal Server Error when opening GC page

There was no change in configuration and all of a sudden, I can not connect to GC. I did notice that OC4J for OC4J_EM is down and I can't get it to go "Alive". Can someone run opmnctl status and print the output for me?
I'm on Windows 2003/GC 10.1.0.4. Anyone has seen this problem?
Cheers,
Rodney

Exact error when opening page is:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
Bruno

Hi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James

Error when opening an RFC connection (LB : Hostname or service of the messa

Hi All,
Im trying to transport datasources in BW, they are 7.x RSDS datasources. but we did not change the source system, it was existing and we are using the same source for older BW version. we now installing new BW 7.x system.
These transports went fine in BQ system but failing in BP system with the below error :
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when activating DataSource 2LIS_17_I0NOTIF RP1CLT100
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when resetting DataSource 2LIS_17_I0NOTIF RP1CLT100 to the active version
the datasource 2LIS_17_I0NOTIF is active in RP1CLT100 system. when this transport goes to prod it tries to overwrite the existing one, as there are no changes to the datasource the structure will be the same.
but after that it cant able to activate that datasource.
so my question is can we able to activate this datasource in RP rather than doing transport again from R/3 Dev---R/3 PRD.
i tried RSDS_DATASOURCE_ACTIVATE_ALL but it doesn't help.
another question is when we migrate from 3.x datasource to 7.x, does this change any metadata in R/3 system as well.
Best Regards
Robyn.

Hi Rizwan,
Looking at the error message it seems like there is some issue with RFC connection and whatever objects you are trying to move are not reaching to target system. Just have a check with basis team.
Once you migrate DS from 3.x to 7.0 yes there will be some meta data changes e.g. the DS type will be changed from ISFS to RSDS. You will have to send the migration along with current data source.
Regards,
Durgesh.

Error when opening an RFC connection in IDT

Hi Experts,
I m trying to create a relational connection (JCO) from IDT to BW 7.4, and I m getting the following error:
Error when opening an RFC connection (CPIC-CALL: ' ThSAPOCMINIT', communication
I searched this error in Internet and I found many discussions about it ...And I think it's about autorizations in BW system that by default dosen't allow external servers to connect to it.
So, I changed the values for the following parameters in RZ11 t-code:
gw/acl_mode = 0
gw/reg_no_conn_info = 0
But I still get the same error ...When I checked the SM59 t-code I found that IDT create an entry in TCP/Ip connections ...
Can you guide me to solve this issue...
BW server is 7.4 version on AIX OS
BO server is 4.1 SP05 on windows system
Thank's a lot for your help.
Abdess,

Hi,
test the RFC connection in sm59.If it is sussecfull then try to create conneciton otherwise see the error message.
Amit

Error when opening table container file keydb read only

Hi Guys,
We are installing solution manager 4.0 on windows/sql but we are getting following error and couldnt continue the installation
FKD-00070 Error when opening table container file C:\PROGRA1\SAPINS1\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml for writing. Possible reason: "read-only"
ERROR 2008-06-04 20:10:56.843
FKD-00049 XML - Parser error: error: no DTD specified, can't validate in line 1, 1
in file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml.
Please help
Regards,
Santosh

Further info
keydb.xml is empty and the directory has got write access for everyone
regards
Edited by: Santosh Keerti on Jun 4, 2008 1:29 PM

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

Error When Opening Document

I receive the following error when opening a Web Intelligence Document, no matter the user.
Cannot initialize Report Engine server. (Error: RWI 00226) (Error: INF )
I also cannot run any reports. Anyone have an idea? I cannot seem to find any information in the knowledgebase on that error.

Phasenjager,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Error when opening a query

Similar Messages

Maybe you are looking for