Error when opening Administrator console

Hi All,
I am getting the below error when I try to open the administrator console.
I do have access to the application privilege sap.hana.admin::Monitoring.
Can anyone please let me know how this can be resolved.
Goutham

Providing the "CATALOG READ" privilege should fix this.
- Lars

Similar Messages

Error when opening BPEL Console:No domains accessible to the user logged in

Hi,
I have upgraded the SOA SUITE from 10.1.3.1 to 10.1.3.4 by applying the patch. Before applying the patch, I run the scripts to upgrade the database for both ESB and BPEL. After applying the patch I made the change in <ORACLE_HOME>\j2ee\oc4j_soa\configdata-sources.xml file for the BPELPM_CONNECTION_POOL parameter. But when I am opening BPEL Console it is showing the error like “No domains accessible to the user logged in". And in the log file I am getting the error like
ORABPEL-03003
Incorrect db schema version.
The database schema version "2.0.4" from the database does not match the version "10.1.3.4.0" expected by the server.
The database schema currently in place has probably been configured for a previous release; please re-install the database schema and try to start the server again.
Does anybody knows how to fix this problem?
Thanks,
Anju

Hello,
I had the same problem and reconfiguring the datasources.xml was the solution. Because the installer replace its values with all wrong values. For example: using polite driver instead OracleDriver, 1522 instead 1521, user and password.
That solved my problem, maybe you must check all parameters of the datasources.xml and restart the server.

Network error when opening EAS console

Hi All,
I installed the Hyperion successfully. When I start the Essbase Administration Services Console, I get the following error as *"ERROR - 1042006 - Network error [111]: Unable to connect to [localhost:1423]. The client timed out waiting to connect to Essbase Agent using TCP/IP. Check your network connections. Also make sure that server and port values are correct".* Kindly guide me to overcome this issue.
Thanks and Regards
Chimbu

Hi Chimbu,
Follow the below steps.
*1. Open the Windows Registry (Start -->Run --> RegEdit).*
*2. Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\TCPIP\Parameters.*
*3. Add new DWORD Value named "TcpTimedWaitDelay"*
     - Right click and select Modify
     -Select "Decimal" radio button, type in 30.
*4. Add new DWORD Value named "MaxUserPort"*
     -Right click and select Modify
     -Select "Decimal" radio button, type in 65534
*5. A reboot of the server(Restart the Hyperion related Services) is necessary.*
Thanks And Regards
Saru

FATAL error when opening Java Console in IE6.0 ?!

JDK 1.5.0_04 + JRE 1.5.0_04
I am experiencing problems with the following issue.
Java JDK/JRE 1.5.0_04 (the latest distribution)
I installed Java JDK last night and after installation everything was OK, until my IE6.0 Browser crashed (I had to close all the browser windows)
After this I wasn't able to load Java Console anymore but I got the following error message.
TM- FATAL ERROR
The Java Runtime Environment cannot be loaded from <\bin\server\jvm.dll>
(I also cannot run any Applets)
NOTE
The Java Console worked just fine right the installation.
I do have two user accounts on the same computer and if I login to the other users account everything is OK; i.e. I am able to run Applets and Java Console I also can open without any problems.
I have now done the following.
1) I have reinstalled the JRE
2) I have reinstalled the JDK
3) I have reinstalled both again into different directories.
If I just uninstall JRE then I can gain the previous version of the JRE back into use and then I am able to run Applets normally. ( version JDK 1.4.2_05+JRE 1.4.2_05)
How could I overcome this problem ??

User,
As you did not give any other information other then the stack trace it's heard to help. Does this error show a dialog box which asks you if want to save your work and exit or save and continue?
Where was the ER diagram created?
Timo
Edited by: Timo Hahn on 20.05.2012 17:10

Error while opening administrator Editior

Experts!
When I open HANA studio I see the error's below could any one help.
when I place cursor on systems - Local host - system state can't be determined , SAP control request failed : Unexpected end of file from server
I see this error when I open administrator console.
" Error while opening administrator Editor ' reason could not get environment of system 'JFJ' sap_retrieval_path cannot be determined
Thanks,'
Joe

Hi Joe,
This is 'shared' HANA system and by design your HANA DB user doesn't have a lot of privileges.
Best regards,
Emil

Getting 500 Internal Server Error when opening GC page

There was no change in configuration and all of a sudden, I can not connect to GC. I did notice that OC4J for OC4J_EM is down and I can't get it to go "Alive". Can someone run opmnctl status and print the output for me?
I'm on Windows 2003/GC 10.1.0.4. Anyone has seen this problem?
Cheers,
Rodney

Exact error when opening page is:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

STMS: RFC error: Error when opening an RFC connection

Hello ,
I was wondering if you could help me with this TMS issue.
The transport system is not working properly.
The fallowing error is shown:
Could not start transport control program tp
RFC error: Error when opening an RFC connection
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 3
RFC error text: Error when opening an RFC connection
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
When I test the tp tools:
tp Call and RFC Ping: Error when opening an RFC connection
Another thing would be that when testing the RFC connection CALLTP_Linux I have the error:
ERROR: user XXX is not authorized to start TP /usr/sap/SID/DVEBMGS53/exe
And I have to say that the user has maximum authorizations.
I also checked the permissions of the tp at OS level but everything seems to be ok.
Can you help me with this?
BR,
Manoliv

Dear Manoliv,
Firstly please check if you have enough space in /usr/sap/trans file system.
If OK, please run RSTPTEST report from SE38 and check the log file in SMGW => Goto => Trace => Gateways => Display file
and paste the log here.
Also, I assume filesystem permissions are OK.
Regards,
Sujit.

Error when Installing Eax-console as part of Audigy support pack 3.6

<div class="lia-component-body lia-message-body">Hey there, out of nowhere I have the following problem:
I have used several versions of this audigy support Pack up to now, both in Windows XP and Windows 7 RC and all worked fine for me. Most recently I used 3.5 and 3.6 in both OS for a short time.
now I had to format my harddisk an have installed a clean version of Win XP SP3. I installed an update pack (winboard.org), the latest direct X and drivers for nvidia motherboard and videocard. Then, when I tried to install this support pack, I get an error messagge I-00 when eax-console should have been installed, something about CTengine being unable to be installed.
I read through many of the solutions here in the forum, since this error seems to be not so rare. But up to now, nothing helped. This is, what my install.log tells me:
[EAX Console]
GUID={5B7E626-7885-4FC3-A66A-73548A4F0FD}
Warning=I-008 CTRegSvr fails to register C:\Programme\Creative\EAX\Karaoke.exc.
[Common Audio Driver Interface]
GUID={700932B3-A964-4878-82A2-96054622AF7}
Warning=I-007 RegSvr32 fails to un-register C:\Programme\Creative\ShareDLL\CADI\ctcadi.dll.
All other install.log from the other parts of the pack contain no warning. Everything except the EAX-console works fine, if I try to start that, I get an error "No components are registered", an I don't have a "karaoke" register, but otherwise it works well, I can use the effects and cmss.
What the heck could I do?
I made an new thread, since nobody seamed to react to my post in the support pack thread.

HRe: Error when Installing Eax-console as part of Audigy support pack 3.6o What you have is a missing file, or perhaps your system is wanting to install direct X redistributable or something similar. Do a search on your system for install.log and when you find the newest one, or second to newest one, open it with notepad. It will tell you exactly what you are missing. I was trying to install some components for my Elite Pro and it said in the install.log that it could not find DXREDIST. So I copied a version I had to the installing program's folder and it worked!? So take a look at that log and see what is missing......write back with your results if you dont mind. In the original post I had seen the registration problems with components. You can manually run regsvr32 with the /? switch and see how to unregister that yourself and then try the installation again.
Cheers,
jmacguire

WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection

Hi all SDNers,
Help is needed on error "WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection".
This error occured on RCA -> Extractor FWK administration and go to managed system (PI) and from the log, i can see some extraction failed due to error message " Error when opening an RFC connection"
consequently, JAVA performance data is not appearing in RCA -> workload analysis but work fine for ABAP and adapter engine.
I've followed below notes and perform the troubleshooting step by step by still to no avail:
Note 1332428 - Missing data in service sessions from BI/CCDB
Note 1257308 - FAQ: Using EarlyWatch Alert
Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27
Note 1265070 - Diagnostics - Setup of Managed Systems
Note 1010428 - End-to-End Diagnostics
http://wiki.sdn.sap.com/wiki/display/SMSETUP/WorkloadAnalysis-Noapplicabledatafound
steps that have performed:
restarted agent
enlarge RFC resource cap for solmandiag and none
delete entire SID in SMSY and pull again from SLD, re-setup managed system
restart PI system
i've spent 2 days on troubleshooting this issue but lack of information in SMP and SDN, even in google.
in table E2E_EFWK_STATUS and extractor E2E_JAVA_EXTRACTOR_IF, i see all WLI_ID ended with RC 96, MESSAGE = Error when opening an RFC connection and LASTRECORDS = 0
I strongly believe this is the issue that causing no applicable data found for JAVA data.
fyi, we are on SOLMAN EHP1 SPS27.
Any kind advise is most welcome.
Thanks,
Nicholas Chang

Gosh! at last i found the solution!!
I appreciate those who tried to help and i''m sharing the solution as i believe this is the purpose of SDN Forum and help others Netweaver Chap who facing the same problem:
Problem faced:
Extractor failed intermittently for WORKLOAD ANALYSIS (Introscope Data) due to error message "Error when opening an RFC connection"
Due to the above error, performance data is not available in RCA workload analysis for J2EE engine.
Possible Solution:
1) Ensure both webadmin & SOLMANDIAG RFC working fine -> SM59 -> TCP/IP
2) go to SE16 -> E2E_RESOURCES and change the resourcecap to 10 for SOLMANDIAG
3) go to /smd/services -> Diagnostic System -> Advanced Setup -> Abap connectivity -> Connection Configuration and change server count to 10
4) Restart webadmin (step 3 & 4 can perform in VA too)
5) set gw/keepalive & gw/reg_keepalive to value 0 in RZ11 (without reboot of instance)
5) again go to SM59 -> TCP/IP -> SOLMANDIAG and put in the gateway host and gateway service correctly, don't leave this empty!!!! -
> This is the main solution to solve intermittent failed RFC for extractor.
Now, go back and monitor the extractor log and you should see no RFC error anymore and wait for 1 hour for the data to populate.
Thanks!
Nicholas Chang,

Error when opening RFC Connection

Hello SAPers,
I have configured PDA in my ECC6.0 --- XI (ABAP+JAVA) Which was successful.
In my Web Dyno Pro Content Administrator
I have performed the JCO Destinations test which was successful
when I go to the URL
http://server:port/webdynpro/dispatcher/sap.com/isisrsrsmenapp/MainApp
entered the store number
In the next menu
Inventory Lookup when I enter the Article number and press Go Button
It is giving me error " Error when opening RFC Connection "
Rest of them working perfectly...
Do I need to do any configuration In Visual Admin?
Could anyone advice
Thanks In Advance
HariKrishna

Thanks it got solved it was an error in RFC, I have changed the RFC now it is working fine
Thanks
Hari

TMS - Error when opening an RFC connection

Hi,
TMS communication error with TMSADM@<SID>.DOMAIN_<SID>
Message no. XT153
Diagnosis
There was an error during communication with the RFC destination
TMSADM@<SID>.DOMAIN_<SID>
System Response
The exact error message of the system is:
Error when opening an RFC connection
Procedure
The function terminates.
Procedure for System Administration
Check your TMS configuration with the transaction STMS.
when i check RFC connections through sm59 its working fine.
plz advise.
Thanks in advance.

try to reconfigure STMS easy way to soluve your problem
or goto STMS -> system overview try to update the configuration
Samrat

Memory full - error when open a Peoplesoft crystal report 9/10

Post Author: damisetty
CA Forum: General
Greetings!
We are gettign Memory Full error when open few of the delivered crystal reports. We are using Crystal 9 bundled with peoplesoft, i tried to open with Crystal 10, but same error.
Could any one help me out?
Thanks in advance.
Naga

Are you a Developer or QA or end user? Have you discussed this with your Developer at all? We seem to keep going around in circles. Your Developer should know what he did and how to deploy your app and CR assemblies and what to use.
Subject line is VS 2010, CR for VS 2010 is the only version supported in VS 2010. CR 2008 doesn't have 64 bit runtime. therefore it's not an option, your WEB Servers app pool MUST run in 32 bit mode only if you are using CR 2008.
"If I install the 64 bit version of SAP CR. Should the assembly change in the aspx files? different version number?" Nothing in your app, just deploy the 64 bit runtime and set your app pool to run in 64 bit mode.
If you are using CR for VS 2010 then you can run your WEB server in 64 bit mode and use CR for VS 2010 64 redist files on your WEB server. Then all DB Drivers, Printers and anything else MUST be installed in 64 bit versions. This includes what ever dependencies your UFL has, they too must also support 64 bit platform.
NO Additional requirements to be done or used for 64 bit WEB applciations, just requires IIS App Pool to be run in 64 bit mode and all dependencies available in 64 bits. ODBC DSN is created using the 64 bit ODBC Administrator, Printers support 64 bit applications.
And your UFL and any of it's dependencies must be located in as well as GAC'd if it's required, once again check with your UFL developer:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
I suggest you purchase a support case and work with one of our Rep's to sort this out.
http://store.businessobjects.com/store/bobjamer/en_US/DisplayCategoryProductListPage&CategoryID=55987300
Don
Edited by: Don Williams on Oct 20, 2011 1:35 PM

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
Bruno

Hi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James

Error when opening an RFC connection (LB : Hostname or service of the messa

Hi All,
Im trying to transport datasources in BW, they are 7.x RSDS datasources. but we did not change the source system, it was existing and we are using the same source for older BW version. we now installing new BW 7.x system.
These transports went fine in BQ system but failing in BP system with the below error :
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when activating DataSource 2LIS_17_I0NOTIF RP1CLT100
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when resetting DataSource 2LIS_17_I0NOTIF RP1CLT100 to the active version
the datasource 2LIS_17_I0NOTIF is active in RP1CLT100 system. when this transport goes to prod it tries to overwrite the existing one, as there are no changes to the datasource the structure will be the same.
but after that it cant able to activate that datasource.
so my question is can we able to activate this datasource in RP rather than doing transport again from R/3 Dev---R/3 PRD.
i tried RSDS_DATASOURCE_ACTIVATE_ALL but it doesn't help.
another question is when we migrate from 3.x datasource to 7.x, does this change any metadata in R/3 system as well.
Best Regards
Robyn.

Hi Rizwan,
Looking at the error message it seems like there is some issue with RFC connection and whatever objects you are trying to move are not reaching to target system. Just have a check with basis team.
Once you migrate DS from 3.x to 7.0 yes there will be some meta data changes e.g. the DS type will be changed from ISFS to RSDS. You will have to send the migration along with current data source.
Regards,
Durgesh.

Error when opening Administrator console

Similar Messages

Maybe you are looking for