Error when opening an RFC connection
Hello Team,
We are facing "Error when opening an RFC connection" when we are executing RFC . I checked JCO connections . its working . What could be the reason ?
Regards,
Mayank
Hi Santosh,
But If I will delete or rebind again , it may happen that I miss some mappings and it will create other errors then. As I mentioned earlier from code perspective it was working good. We had Host name migration and it stopped working. I guess I am or Basis is missing some configuration. What do you think Playing with Model will be a good idea ?
Regards,
Mayank
Similar Messages
-
Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
BrunoHi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James -
Error when opening an RFC connection (LB : Hostname or service of the messa
Hi All,
Im trying to transport datasources in BW, they are 7.x RSDS datasources. but we did not change the source system, it was existing and we are using the same source for older BW version. we now installing new BW 7.x system.
These transports went fine in BQ system but failing in BP system with the below error :
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when activating DataSource 2LIS_17_I0NOTIF RP1CLT100
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when resetting DataSource 2LIS_17_I0NOTIF RP1CLT100 to the active version
the datasource 2LIS_17_I0NOTIF is active in RP1CLT100 system. when this transport goes to prod it tries to overwrite the existing one, as there are no changes to the datasource the structure will be the same.
but after that it cant able to activate that datasource.
so my question is can we able to activate this datasource in RP rather than doing transport again from R/3 Dev---R/3 PRD.
i tried RSDS_DATASOURCE_ACTIVATE_ALL but it doesn't help.
another question is when we migrate from 3.x datasource to 7.x, does this change any metadata in R/3 system as well.
Best Regards
Robyn.Hi Rizwan,
Looking at the error message it seems like there is some issue with RFC connection and whatever objects you are trying to move are not reaching to target system. Just have a check with basis team.
Once you migrate DS from 3.x to 7.0 yes there will be some meta data changes e.g. the DS type will be changed from ISFS to RSDS. You will have to send the migration along with current data source.
Regards,
Durgesh. -
Error when opening an RFC connection in IDT
Hi Experts,
I m trying to create a relational connection (JCO) from IDT to BW 7.4, and I m getting the following error:
Error when opening an RFC connection (CPIC-CALL: ' ThSAPOCMINIT', communication
I searched this error in Internet and I found many discussions about it ...And I think it's about autorizations in BW system that by default dosen't allow external servers to connect to it.
So, I changed the values for the following parameters in RZ11 t-code:
gw/acl_mode = 0
gw/reg_no_conn_info = 0
But I still get the same error ...When I checked the SM59 t-code I found that IDT create an entry in TCP/Ip connections ...
Can you guide me to solve this issue...
BW server is 7.4 version on AIX OS
BO server is 4.1 SP05 on windows system
Thank's a lot for your help.
Abdess,Hi,
test the RFC connection in sm59.If it is sussecfull then try to create conneciton otherwise see the error message.
Amit -
Error in Local Message System: Error when opening an RFC connection Message
Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner "local:sapgw00' not reached
Error Details LOCATION: SAP-Gateway on host local / sapgw05
Error Details DETAIL: NiPConnect2
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 40142
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 2835
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Wed Jan 11 23:26:54 2012
Error Details VERSION: 38
Kindly Help.....Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj -
STMS: RFC error: Error when opening an RFC connection
Hello ,
I was wondering if you could help me with this TMS issue.
The transport system is not working properly.
The fallowing error is shown:
Could not start transport control program tp
RFC error: Error when opening an RFC connection
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 3
RFC error text: Error when opening an RFC connection
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
Procedure
Contact your system administrator or use report RSTPTEST to localize the error. You can then execute the command again.
When I test the tp tools:
tp Call and RFC Ping: Error when opening an RFC connection
Another thing would be that when testing the RFC connection CALLTP_Linux I have the error:
ERROR: user XXX is not authorized to start TP /usr/sap/SID/DVEBMGS53/exe
And I have to say that the user has maximum authorizations.
I also checked the permissions of the tp at OS level but everything seems to be ok.
Can you help me with this?
BR,
ManolivDear Manoliv,
Firstly please check if you have enough space in /usr/sap/trans file system.
If OK, please run RSTPTEST report from SE38 and check the log file in SMGW => Goto => Trace => Gateways => Display file
and paste the log here.
Also, I assume filesystem permissions are OK.
Regards,
Sujit. -
WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection
Hi all SDNers,
Help is needed on error "WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection".
This error occured on RCA -> Extractor FWK administration and go to managed system (PI) and from the log, i can see some extraction failed due to error message " Error when opening an RFC connection"
consequently, JAVA performance data is not appearing in RCA -> workload analysis but work fine for ABAP and adapter engine.
I've followed below notes and perform the troubleshooting step by step by still to no avail:
Note 1332428 - Missing data in service sessions from BI/CCDB
Note 1257308 - FAQ: Using EarlyWatch Alert
Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27
Note 1265070 - Diagnostics - Setup of Managed Systems
Note 1010428 - End-to-End Diagnostics
http://wiki.sdn.sap.com/wiki/display/SMSETUP/WorkloadAnalysis-Noapplicabledatafound
steps that have performed:
restarted agent
enlarge RFC resource cap for solmandiag and none
delete entire SID in SMSY and pull again from SLD, re-setup managed system
restart PI system
i've spent 2 days on troubleshooting this issue but lack of information in SMP and SDN, even in google.
in table E2E_EFWK_STATUS and extractor E2E_JAVA_EXTRACTOR_IF, i see all WLI_ID ended with RC 96, MESSAGE = Error when opening an RFC connection and LASTRECORDS = 0
I strongly believe this is the issue that causing no applicable data found for JAVA data.
fyi, we are on SOLMAN EHP1 SPS27.
Any kind advise is most welcome.
Thanks,
Nicholas ChangGosh! at last i found the solution!!
I appreciate those who tried to help and i''m sharing the solution as i believe this is the purpose of SDN Forum and help others Netweaver Chap who facing the same problem:
Problem faced:
Extractor failed intermittently for WORKLOAD ANALYSIS (Introscope Data) due to error message "Error when opening an RFC connection"
Due to the above error, performance data is not available in RCA workload analysis for J2EE engine.
Possible Solution:
1) Ensure both webadmin & SOLMANDIAG RFC working fine -> SM59 -> TCP/IP
2) go to SE16 -> E2E_RESOURCES and change the resourcecap to 10 for SOLMANDIAG
3) go to /smd/services -> Diagnostic System -> Advanced Setup -> Abap connectivity -> Connection Configuration and change server count to 10
4) Restart webadmin (step 3 & 4 can perform in VA too)
5) set gw/keepalive & gw/reg_keepalive to value 0 in RZ11 (without reboot of instance)
5) again go to SM59 -> TCP/IP -> SOLMANDIAG and put in the gateway host and gateway service correctly, don't leave this empty!!!! -
> This is the main solution to solve intermittent failed RFC for extractor.
Now, go back and monitor the extractor log and you should see no RFC error anymore and wait for 1 hour for the data to populate.
Thanks!
Nicholas Chang, -
SMQ1 status CPICERR - Error when opening an RFC connection
Hie we have all our out bound queus failing with status CPICERR - Error when opening an RFC connection..
I checked RFC connections from CRM - R3 and everything looked ok..
Can anyone guess what is the problem?
Regards,
Lata.Hi,
Test the connection once again and it can be a problem sometimes with other server also.I would suggest make a new connection, test it and if its fine try ur work wid this connection.
Regards. -
Test conn. SAPOSS error when opening an RFC connection SNC processing fail
Dear all,
I configured a Saprouter in DMZ with SNC connection type to establish connection from my company to SAP and vice-versa. Also I accept connection from external company to our SAP systems. During the test in SM59 SAPOSS connection I receive the following error:
Logon Errore di colleg.
Dettagli err. Error when opening an RFC connection
Dettagli err. ERROR: SNC processing failed: SncSessionInitiatorAK
Dettagli err. LOCAZ.: SAProuter 39.1 (SP3) on 'srvsaprouter1'
Dettagli err. DETT.: NiSncIInitHdlSecurity: sncrc=-4;0x9d9350
Dettagli err. COMPONENT: NI (network interface)
Dettagli err. CONTAT.: 209
Dettagli err. MODULE: nisnc.c
Dettagli err. RIGA: 1091
Dettagli err. VALORE RIT.: -104
Dettagli err. SUBRC: 0
Dettagli err. RELEASE: 710
Dettagli err. ORA: Fri Jul 17 11:01:22 2009
Dettagli err. VERS.: 39
My saprouttab for SAP AG connection is the following:
#SNC-connection from and to SAP
#KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
KT "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 194.39.131.34 *
SNC-connection from SAP to local R/3-System for Support
#KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * *
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.229 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.229 3201
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.211 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.211 3600
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.209 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.210 3201
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.231 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.231 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0s.calpeda.priv 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0sc.calpeda.priv 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.242 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.242 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0t.calpeda.priv 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0tc.calpeda.priv 50000
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.215 3200
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" 192.101.111.215 50100
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0p.calpeda.priv 50100
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" epe0pc.calpeda.priv 50100
SNC-connection from SAP to local R/3-System for NetMeeting, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 1503
SNC-connection from SAP to local R/3-System for saptelnet, if it is needed
KP "p:CN=sapserv2, OU=SAProuter, O=SAP, C=DE" * 23
Access from the local Network to SAPNet - R/3 Frontend (OSS)
#P <IP-addess of a local PC> 194.39.131.34 3299
P * * *
P * 194.39.131.34 3299
D * * *
Any suggestions?
Thanks in advance.SNC processing failed could mean lots of things... did you installed the SAPcrypto library?.. did you created the certificates correctly?...
Read SAP notes 812386 and 33135.
Regards
Juan -
HTTP_POST - Error when opening an RFC connection
Performing POST-query. Works well in simple program, and in WebDynpro application:
<i>Error when opening an RFC connection</i>
l_dest = 'SAPHTTP'.
CALL FUNCTION 'HTTP_POST'
EXPORTING
absolute_uri = l_uri
rfc_destination = l_dest
user = l_username
password = l_password
blankstocrlf = 'Y'
REQUEST_ENTITY_BODY_LENGTH =
PROXY =
PROXY_USER =
PROXY_PASSWORD =
IMPORTING
status_code = l_status
status_text = l_statustext
response_entity_body_length = l_rlength
TABLES
request_entity_body = req_body
request_headers = req_headers
response_entity_body = res_body
response_headers = res_headers
EXCEPTIONS
connect_failed = 1
timeout = 2
internal_error = 3
tcpip_error = 4
system_failure = 5
communication_failure = 6
OTHERS = 7
Edited by: S S on Nov 28, 2008 4:01 PMYou can't use SAPHTTP for the destination. This RFC destination uses the SAPGUI to make the HTTP call. Either use SAPHTTPA (the A stands for Application Server) or better yet use the newer CL_HTTP_CLIENT class. The class uses the ICM instead of a standalone executable to make HTTP calls.
-
TMS - Error when opening an RFC connection
Hi,
TMS communication error with TMSADM@<SID>.DOMAIN_<SID>
Message no. XT153
Diagnosis
There was an error during communication with the RFC destination
TMSADM@<SID>.DOMAIN_<SID>
System Response
The exact error message of the system is:
Error when opening an RFC connection
Procedure
The function terminates.
Procedure for System Administration
Check your TMS configuration with the transaction STMS.
when i check RFC connections through sm59 its working fine.
plz advise.
Thanks in advance.try to reconfigure STMS easy way to soluve your problem
or goto STMS -> system overview try to update the configuration
Samrat -
RFC call failed : Error when opening an RFC connection
Hi,
As a result of "Start Data Collection" operation in the t-code RZ70, I have got this error.
"RFC call failed : Error when opening an RFC connection"
Others things are with success message.
Regards,
Bala Rajahi
check this links
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/da0f41026df223e10000000a155106/frameset.htm
also check Tcode: SLDAPICUST.
run tcode SLDCHECK? any error?
Thanks
Rodrigo
PS: If useful reward points -
RFC Error:Error When opening an RFC Connection
Hi All,
When im trying the following, RFC error is thrown:
TCODE DSWP->EDIT->Fetch SAP Components
The Error is:
RFC Error:Error When opening an RFC Connection
Also I have checked in SM59, the following 3 RFC Connections are throwing error:
SAP-OSS
SAP-OSS-LIST-O01
SAPOSS
Kindly suggest me to do the workarounds.
Thanks and Regards,
FaisalHi Raguraman,
Following is the error text for RFC Connection SAP-OSS
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: timeout while pending for route completion
Error Details LOCATION: SAP-Server SMGDCS1S_D18_01 on host SMGDCS1S (wp 1)
Error Details DETAIL: NiErrSet
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 3
Error Details MODULE:
Error Details LINE:
Error Details RETURN CODE: -12
Error Details SUBRC: 0
Error Details RELEASE: 700
Error Details TIME: Fri May 02 00:33:48 2008
Error Details VERSION: 38
Kindly do the needful.
Regards,
Faisal -
There is a RFC connection not working connection test fails.
I found out the RFC is using a a program id that is not registerd.
When I register the program on os level like rfcexec -r -a <program_id> -g <hostname> -x <sapgw> the connection test on the rfc works.
The problem with the rfcexec is that it just works as long as the os session is active.
From what I´ve read I need to configure this on java side in the web dynpro content administrator.
Can you help me with that ? When I try to click Create jco destination I get an error.Hello Vioar,
rfcexec is only a standard program for testing, you sould not register it for your application on the gateway.
Since you are getting "User is not allowed to read any data..." - did you logon with the correct user? Does this user have enough authorizations?
Regards,
Alwina -
RFC error text: Error when opening an RFC connection
Hello!
I have recently an error in Tcode STMS.
The following error comes up:
I use only Solution Manager and have to tranport
System <SAPSID> Kommando TMS_MGR_READ_TRANSPORT_QUEUE
Mandant 000 Service Transport Service
Benutzer TMSADM Start Online
Datum 24.09.2007 Funktion TMS_TP_SHOW_BUFFER
Uhrzeit 11:07:06 Meldung TP_CALL_FAILED
Moreovert is not possible to open import gueue.
The error is: the import queue cannot be read.
Thank you very much!
regards
ThomFirst, could you please do the following check:
1) Call SM59, check RFC destinations: AI_RUNTIME_JCOSERVER and
AI_DIRECTORY_JCOSERVER, what is the Program ID under Registered
Server Program section?
2) Call J2EE visual admin, choose cluster -> server -> JCO RFC provider
there should be AI_RUNTIME_<SID> and AI_DIRECTORY_<SID> under
available RFC destination tab. Please make sure their names are the
same as the program ID registered in AI_RUNTIME_JCOSERVER and
AI_DIRECTORY_JCOSERVER respectively.
3) Also make sure the gateway host and service are the same in both
RFC configurations.
Can you perform an R/3 trace for this issue aswell - to trace the
RFC connection issue? It maybe that there is an error like
"timeout during allocate of registered program" which is likely with
this type of message in SXMB_MONI. (SAP Note No. 84850)
1) set gw/reg_timeout to a higher value
2) check/change current Queue and Mapping Configuration/Setup
the parallel number of XI outbound queues (XBTO* queues) is
set in XI configuration (SXMB_ADM); setting EO_OUTBOUND_PARALLEL
to e.g. 20 allows 20 messages to be mapped in parallel;
this queue number multiplies by the number of different
configured receivers
#receivers * EO_OUTBOUND_PARALLEL should correspond to the number
of parallel configured mapping threads (J2EE Visual Admin,
service JCo Rfc Provider, Destination AI_RUNTIME_*, #processes)
if ( #used-outbound-queues > #jco-mapping-threads ) then this
can cause the above seen timeout error
=> consequence check/change parameter EO_OUTBOUND_PARALLEL or
JCo mapping threads (processes)
Finally, if you are perhaps running on AIX, then check note 716927
Otherwise tell which OS do you run on
regards,
jaime
Maybe you are looking for
-
Ipod Nano 6th gen is not recognized by my computer or itunes.
I have tried everything the forums have said and have also tried every solution i could find online. Please help, this is getting ridiculous.
-
Mac pro running OS 10.5.8 won't boot. Apple logo and spinning wheel shows then Apple logo turns into Forbidden signage while spinning wheel continue. It happenened right after I installed a firmware. Had to restart.Please help. What can I do?
-
Flash vs. Fireworks for Animation Map
Quick "flash" question. I need to supply a flash animation map of the US, where the user clicks on individual states... afterwhich the state color changes to a 2nd color and the data is ported to a website/dbase. Based on that info, can this be done
-
Why is CS6 on trial when I've had it for a year
Last year i started my game programming course and got a CS6 master collection code that I used and then a few months later they told me to create an account which I did. I then used my code again attaching it to my account instead of just my compute
-
Our family has used my Apple ID for several years. How do I create new Apple IDs for my family members, associate their devices to their IDs and share the music, apps, etc that have been purchased under my ID?