Error when opening application developed in jdev11.1.1.5.0 in jdev 11.1.2.0

Dear All,
I have developed an application in jdev11.1.1.5.0 and i am just trying to run it in jdev 11.1.2.0.0, first of all it migrated all files sucessfully to its own new format(it was done automatically).
Now next when i try to run my application it gives me following error and application fails to run i.e it doesnot even goes ahead of compilation means it gives error in compilation.
Error: An unreported error occurred in Appc. No errors were reported, but the tool returned a failure result code: 1.
Warning: <Sep 28, 2011 9:56:56 AM IST> <Error> <J2EE> <BEA-160187> <weblogic.appc failed to compile your application. Recompile with the -verbose option for more details. Please see the error message(s) below.>
Warning: There are 1 nested errors:
Warning: weblogic.servlet.internal.dd.compliance.ComplianceException: There is no servlet definition for the servlet-name "SaveAnnotations" specified in the filter element "adfBindings".
Warning:      at weblogic.servlet.internal.dd.compliance.BaseComplianceChecker.addDescriptorError(BaseComplianceChecker.java:76)
Warning:      at weblogic.servlet.internal.dd.compliance.FilterComplianceChecker.checkFilterMapping(FilterComplianceChecker.java:109)
Warning:      at weblogic.servlet.internal.dd.compliance.FilterComplianceChecker.check(FilterComplianceChecker.java:55)
Warning:      at weblogic.servlet.internal.dd.compliance.ComplianceUtils.checkCompliance(ComplianceUtils.java:48)
Warning:      at weblogic.servlet.jsp.JspcInvoker.checkCompliance(JspcInvoker.java:145)
Warning:      at weblogic.servlet.jsp.JspcInvoker.compile(JspcInvoker.java:198)
Warning:      at weblogic.application.compiler.AppcUtils.compileWAR(AppcUtils.java:376)
Warning:      at weblogic.application.compiler.WARModule.compile(WARModule.java:245)
Warning:      at weblogic.application.compiler.flow.SingleModuleCompileFlow.proecessModule(SingleModuleCompileFlow.java:18)
Warning:      at weblogic.application.compiler.flow.SingleModuleFlow.compile(SingleModuleFlow.java:36)
Warning:      at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
Warning:      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
Warning:      at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
Warning:      at weblogic.application.compiler.FlowDriver.run(FlowDriver.java:26)
Warning:      at weblogic.application.compiler.WARCompiler.compile(WARCompiler.java:29)
Warning:      at weblogic.application.compiler.flow.AppCompilerFlow.compileInput(AppCompilerFlow.java:112)
Warning:      at weblogic.application.compiler.flow.AppCompilerFlow.compile(AppCompilerFlow.java:37)
Warning:      at weblogic.application.compiler.Appc.runBody(Appc.java:203)
Warning:      at weblogic.utils.compiler.Tool.run(Tool.java:158)
Warning:      at weblogic.utils.compiler.Tool.run(Tool.java:115)
Warning:      at weblogic.application.compiler.Appc.main(Appc.java:262)
Warning:      at weblogic.appc.main(appc.java:14)Thanks & Regards,
Santosh

So what was the problem? How did you resolve it?
--Chris                                                                                                                                                                                                       

Similar Messages

  • Keep getting application Manager missing or damaged error when opening application

    Application missing or damaged error when opening application.
    Tried CC cleaner
    Tried uninstalling and reinstalling
    Tried Short file name
    Tried AAM patch
    Tried installing Creative Cloud
    Just plain frustrated not getting this software to work.

    What version of Premiere Elements is involved?
    Premiere 12
    And, on what computer operating system is it installed?
    Windows 8
    What are you doing when you get this message about the Adobe Application Manager?
    Opening the application (Premiere)
    Have you tried in install the Adobe Application Manager from the following link?
    for Windows
    Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
    for Mac
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
    Yes
                   Tried CC cleaner
                   Tried uninstalling and reinstalling
                   Tried Short file name
                   Tried AAM patch
                   Tried installing Creative Cloud
         Thank you for the assistance.

  • Firefox error when opening application

    Recently installed latest firefox 3.6.3. Had other issues going on with my computer so am unsure exactly what triggered this event while fixing other issues (checking for virus/malware, updating windows xp). Tried reinstalling but issue still present.
    When opening firefox, error message below appears.
    Error Message: The instruction at "0x7c884204 referenced memory at "0xffffffff". The memory could not be "read".
    Weird thing is, as I have firefox on my quick launch bar, when I double click it, attempting to open the application twice, it works, opening 2 firefox windows with no error. but when firefox is closed and I attempt to open just once, error message above appears.
    == This happened ==
    Every time Firefox opened
    == fixing computer of viruses and malware

    If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    You can use "Disable all add-ons" on the ''Safe mode'' start window.
    You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
    See [[Troubleshooting extensions and themes]]

  • Error when opening application in BAB

    Hi all,
    I copied the standard opportunity view ACT_LEAN to ZACT_LEAN. When I open the view ACT_LEAN in BAB it opens but the custom view ZACT_LEAN is not opening. The follwong error is displayed.
    An error occurred in the BSP application
    The following information is available about the error:
    Name Value
    error-class CX_SY_REF_IS_INITIAL
    error-text Dereferencing of the NULL reference.
    occurredinprogram(include) CL_CRM_BSP_IL=================CP(CL_CRM_BSP_IL=================CM00Y)
    occurredinline 22
    Any help with this?
    thanks in advance,
    Paul.

    Hi,
    you can do a consistency check for your view. This may provide you with more information.
    Best regards
    Adrian

  • Error when opening applications

    I have been having some problems with my system. when I try to open up any application I get this pop-up stating that the app. cannot be open and I get this number at the bottom:
    -10810
    i tried repairing permissions and doing a disk repair. yet this did not solve the problem. I have to shut down and reboot to be able to use the applications.
    anyone knows what is causing this?

    You may be able to repair this with the 10.4.6 Stand Alone Combo Updater.
    This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
    Remember to Verify Disk before update and repair permissions before and after update from /applications/utilities/disk utility.
    -mj
    [email protected]

  • Error When Opening Any Form

    Hi All.,
    Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
    Application:11.5.10.2
    OS-----------HP-UX
    DB-----------10.2.0.4.0
    File Name:
    oracle/forms/ui/FLWTextArea
    Work Around
    Relink the all the files
    Regenerated the jar files
    Regenerated the forms
    f60gen help=y
    Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
    Forms 6.0 (Form Compiler): Release - Production
    (c) Copyright 1999 Oracle Corporation. All rights reserved.
    PL/SQL Version 8.0.6.3.0 (Production)
    Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
    Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
    Oracle Multimedia Version 6.0.8.25.0 (Production)
    Oracle Tools Integration Version 6.0.8.17.0 (Production)
    Oracle Tools Common Area Version 6.0.5.32.0
    Oracle CORE Version 4.0.6.0.0 - Production
    Metalink Doc id
    java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

    Thanks,
    From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
    Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
    https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
    Here is an example:
    If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
    If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
    If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
    If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
    SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
    Enter value for bug_number: 9935935
    old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
    new 1: select bug_number from ad_bugs where bug_number='9935935'
    no rows selected
    SQL>

  • Memory full - error when open a Peoplesoft crystal report 9/10

    Post Author: damisetty
    CA Forum: General
    Greetings!
    We are gettign Memory Full error when open few of the delivered crystal reports. We are using Crystal 9 bundled with peoplesoft, i tried to open with Crystal 10, but same error.
    Could any one help me out?
    Thanks in advance.
    Naga

    Are you a Developer or QA or end user? Have you discussed this with your Developer at all? We seem to keep going around in circles. Your Developer should know what he did and how to deploy your app and CR assemblies and what to use.
    Subject line is VS 2010, CR for VS 2010 is the only version supported in VS 2010. CR 2008 doesn't have 64 bit runtime. therefore it's not an option, your WEB Servers app pool MUST run in 32 bit mode only if you are using CR 2008.
    "If I install the 64 bit version of SAP CR. Should the assembly change in the aspx files? different version number?" Nothing in your app, just deploy the 64 bit runtime and set your app pool to run in 64 bit mode.
    If you are using CR for VS 2010 then you can run your WEB server in 64 bit mode and use CR for VS 2010 64 redist files on your WEB server. Then all DB Drivers, Printers and anything else MUST be installed in 64 bit versions. This includes what ever dependencies your UFL has, they too must also support 64 bit platform.
    NO Additional requirements to be done or used for 64 bit WEB applciations, just requires IIS App Pool to be run in 64 bit mode and all dependencies available in 64 bits. ODBC DSN is created using the 64 bit ODBC Administrator, Printers support 64 bit applications.
    And your UFL and any of it's dependencies must be located in as well as GAC'd if it's required, once again check with your UFL developer:
    C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
    I suggest you purchase a support case and work with one of our Rep's to sort this out.
    http://store.businessobjects.com/store/bobjamer/en_US/DisplayCategoryProductListPage&CategoryID=55987300
    Don
    Edited by: Don Williams on Oct 20, 2011 1:35 PM

  • Error when opening User and Group Preferences

    After upgrading to Lion there is an error when opening User and Group Preferences.
    I´ve repaired permissions but the problem is still there...
    Thanks...

    Hi,
    Double click on ur webdynpro application.Go to application properties tab.create new application property,select predefined property->browse->it will open a popup->select expiration time->give the value for expiration time.
    or
    Refer the note : [842635|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=842635&nlang=EN&smpsrv=https%3a%2f%2fwebsmp206%2esap-ag%2ede]
    Hope it helps,
    Reward points if helpful.
    Regards,
    Shailesh Nagar

  • Error when opening Crystal Reports

    Hi
    I'm getting an error when opening Crysta R. from SAP 2007. Crystal version is 2008 and the error is something like this: The title of the wirndow is: Microsoft .NET Framework. Message: Exception not controlled in application. If you click continue the applicaction will avoid the error...etc.
    Any suggestions?

    Have you installed the 1.1, 2.0 and 3.5 Framework?
    Check your C:\Windows\Microsoft.NET\Framework and verify you have them all. If not go to Microsoft's site and install them.
    Thank you
    Don

  • Error when opening iWeb 09

    After using iWeb 09 since it was released, I now get this error when opening the app.
    Can’t open file “/Applications/iWeb.app/Contents/Resources/Themes/Cloud 9.webtheme/Spanish.lproj/Podcast.webtemplate.”
    I have tried opening from and external back up hard drive and also use Time Machine to replace the iWeb on my internal hard drive.
    What's next?

    Hi there. I think I am having a similar problem. I was looking at some files in iWeb, but I don't believe I changed this one. I changed one of the "playtime" theme files, but then I changed it back. Anyway, I did look at the Modern Frame theme files but I didn't change them because I use them for a couple of my sites, and I was afraid to change anything. Maybe I did by accident? Anyway, here is the error I received.
    Can’t open file “/Applications/iWeb.app/Contents/Resources/Themes/Modern Frame.webtheme/da.lproj/About Me.webtemplate.”
    I am unable to open iWeb at all. That'll teach me.
    Thanks!

  • Error in Local Message System: Error when opening an RFC connection Message

    Hi Gurus,
    We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
    Error in Local Message System: Error when opening
    an RFC connection Message was Not Created
    I have checked RFC connection between ECC and Solution Manager which displays following message
    Logon     Connection Error
    Error Details     Error when opening an RFC connection
    Error Details     ERROR: partner "local:sapgw00' not reached
    Error Details     LOCATION: SAP-Gateway on host local / sapgw05
    Error Details     DETAIL: NiPConnect2
    Error Details     CALL: connect
    Error Details     COMPONENT: NI (network interface)
    Error Details     COUNTER: 40142
    Error Details     ERROR NUMBER: 10060
    Error Details     ERROR TEXT: WSAETIMEDOUT: Connection timed out
    Error Details     MODULE: nixxi.cpp
    Error Details     LINE: 2835
    Error Details     RETURN CODE: -10
    Error Details     SUBRC: 0
    Error Details     RELEASE: 701
    Error Details     TIME: Wed Jan 11 23:26:54 2012
    Error Details     VERSION: 38
    Kindly Help.....

    Hi
    Based on the instance number of the servers, you can determine the gateway to be used.
    IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
    So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
    Hope this info helps,
    ~ Raj

  • Error when open Resouse Viewer form NEBC

    Hi experts,
    I facing a error when opening Resouse Viewer from NWBC.
    Could you kindy provide some ideas or suggestiongs, Thanks in advance.
    Best Regards,
    Matthew He

    Hello,
    the SAP Visual Business frontend component requires the FPM application to run in a browser mode 'standard'. You can press F12 in your browser to adjust this.
    Check note 1987004 to adjust the default mode for the application.
    In addition, it is important to check the SAP VB installation guide for the right NWBC and browser version.
    Hope this helps,
    Marcus

  • Slow script error when opening websites

    I'm getting a slow script error when opening websites

    Safari > Preferences > Advanced > Show Develop menu in menu bar
    Safari > Develop > Disable Runaway JavaScript Timer

  • HTTP_POST - Error when opening an RFC connection

    Performing POST-query. Works well in simple program, and in WebDynpro application:
    <i>Error when opening an RFC connection</i>
    l_dest      = 'SAPHTTP'.
        CALL FUNCTION 'HTTP_POST'
          EXPORTING
           absolute_uri                       = l_uri
           rfc_destination                    = l_dest
           user                               = l_username
           password                           = l_password
           blankstocrlf                       = 'Y'
          REQUEST_ENTITY_BODY_LENGTH        =
          PROXY                             =
          PROXY_USER                        =
          PROXY_PASSWORD                    =
         IMPORTING
           status_code                        = l_status
           status_text                        = l_statustext
           response_entity_body_length        = l_rlength
          TABLES
           request_entity_body                = req_body
           request_headers                    = req_headers
           response_entity_body               = res_body
           response_headers                   = res_headers
         EXCEPTIONS
           connect_failed                    = 1
           timeout                           = 2
           internal_error                    = 3
           tcpip_error                       = 4
           system_failure                    = 5
           communication_failure             = 6
           OTHERS                            = 7
    Edited by: S S on Nov 28, 2008 4:01 PM

    You can't use SAPHTTP for the destination. This RFC destination uses the SAPGUI to make the HTTP call.  Either use SAPHTTPA (the A stands for Application Server) or better yet use the newer CL_HTTP_CLIENT class.  The class uses the ICM instead of a standalone executable to make HTTP calls.

  • Win32 exception error when opening file from RH6 in RH7

    I received the following error when opening a help file
    (.xpj) that was developed in RoboHelp 6 in RoboHelp 7:
    An unhandled win32 exception error occurred in RoboHTML.exe
    [4692].
    This occurred after receiving the notice to upgrade the
    project since it was created in an older version. After selecting
    Upgrade, I received a runtime error message prompt. After clicking
    OK, I received the message above.
    Does anyone know how to resolve this issue so that I can open
    the project without any problems in RH 7?

    Thanks a lot for replying.
    waldemar.hersacher wrote:
    I have Acrobat Reader 5.1 at home and 6 at work and both work fine with the LV 7.1.1 bookshelf and help file.
    Yep, I just uninstalled Adobe Reader 7.0 and installed version 6.0.1. The links now work perfectly, so evidently this is a problem with Adobe Reader 7.0. I'd still like to solve the problem, though, as I really like version 7.0. (Something has finally been done about the program's lengthy start-up time!)
    You can reach the PDF-Files also by using Help>>Search the LabVIEW Bookshelf. Does this link work for you?
    It works perfectly.
    javascript:AcrobatLink('../manuals/lvuser.pdf');
    This is a call to a java script function located in pdf.js.
    Other reasons:
    The Active-X control of Reader 7 has a bug.
    Your Internet security settings will not allow this operation. The Active-X will be loaded but will have no access to the file and yo get a wrong error message.
    Fair enough. If that is indeed the case, which Internet security setting should I try changing? I haven't done anything unusual to any of those settings. And where is pdf.js located? I tried searching for it but could not find it.
    Your advice is greatly apreciated.

Maybe you are looking for