Error when opening applications

I have been having some problems with my system. when I try to open up any application I get this pop-up stating that the app. cannot be open and I get this number at the bottom:
-10810
i tried repairing permissions and doing a disk repair. yet this did not solve the problem. I have to shut down and reboot to be able to use the applications.
anyone knows what is causing this?

You may be able to repair this with the 10.4.6 Stand Alone Combo Updater.
This is a fuller install, as opposed to an incremental "delta" update so it should overwrite any files that are damaged or missing. It does not matter if you have applied it before. It has worked well for many.
Remember to Verify Disk before update and repair permissions before and after update from /applications/utilities/disk utility.
-mj
[email protected]

Similar Messages

Keep getting application Manager missing or damaged error when opening application

Application missing or damaged error when opening application.
Tried CC cleaner
Tried uninstalling and reinstalling
Tried Short file name
Tried AAM patch
Tried installing Creative Cloud
Just plain frustrated not getting this software to work.

What version of Premiere Elements is involved?
Premiere 12
And, on what computer operating system is it installed?
Windows 8
What are you doing when you get this message about the Adobe Application Manager?
Opening the application (Premiere)
Have you tried in install the Adobe Application Manager from the following link?
for Windows
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
for Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Yes
               Tried CC cleaner
               Tried uninstalling and reinstalling
               Tried Short file name
               Tried AAM patch
               Tried installing Creative Cloud
     Thank you for the assistance.

Firefox error when opening application

Recently installed latest firefox 3.6.3. Had other issues going on with my computer so am unsure exactly what triggered this event while fixing other issues (checking for virus/malware, updating windows xp). Tried reinstalling but issue still present.
When opening firefox, error message below appears.
Error Message: The instruction at "0x7c884204 referenced memory at "0xffffffff". The memory could not be "read".
Weird thing is, as I have firefox on my quick launch bar, when I double click it, attempting to open the application twice, it works, opening 2 firefox windows with no error. but when firefox is closed and I attempt to open just once, error message above appears.
== This happened ==
Every time Firefox opened
== fixing computer of viruses and malware

If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the ''Safe mode'' start window.
You have to close and restart Firefox after each change via "File > Exit" (on Mac: "Firefox > Quit")
See [[Troubleshooting extensions and themes]]

Error when opening application in BAB

Hi all,
I copied the standard opportunity view ACT_LEAN to ZACT_LEAN. When I open the view ACT_LEAN in BAB it opens but the custom view ZACT_LEAN is not opening. The follwong error is displayed.
An error occurred in the BSP application
The following information is available about the error:
Name Value
error-class CX_SY_REF_IS_INITIAL
error-text Dereferencing of the NULL reference.
occurredinprogram(include) CL_CRM_BSP_IL=================CP(CL_CRM_BSP_IL=================CM00Y)
occurredinline 22
Any help with this?
thanks in advance,
Paul.

Hi,
you can do a consistency check for your view. This may provide you with more information.
Best regards
Adrian

Error when opening application developed in jdev11.1.1.5.0 in jdev 11.1.2.0

Dear All,
I have developed an application in jdev11.1.1.5.0 and i am just trying to run it in jdev 11.1.2.0.0, first of all it migrated all files sucessfully to its own new format(it was done automatically).
Now next when i try to run my application it gives me following error and application fails to run i.e it doesnot even goes ahead of compilation means it gives error in compilation.
Error: An unreported error occurred in Appc. No errors were reported, but the tool returned a failure result code: 1.
Warning: <Sep 28, 2011 9:56:56 AM IST> <Error> <J2EE> <BEA-160187> <weblogic.appc failed to compile your application. Recompile with the -verbose option for more details. Please see the error message(s) below.>
Warning: There are 1 nested errors:
Warning: weblogic.servlet.internal.dd.compliance.ComplianceException: There is no servlet definition for the servlet-name "SaveAnnotations" specified in the filter element "adfBindings".
Warning:      at weblogic.servlet.internal.dd.compliance.BaseComplianceChecker.addDescriptorError(BaseComplianceChecker.java:76)
Warning:      at weblogic.servlet.internal.dd.compliance.FilterComplianceChecker.checkFilterMapping(FilterComplianceChecker.java:109)
Warning:      at weblogic.servlet.internal.dd.compliance.FilterComplianceChecker.check(FilterComplianceChecker.java:55)
Warning:      at weblogic.servlet.internal.dd.compliance.ComplianceUtils.checkCompliance(ComplianceUtils.java:48)
Warning:      at weblogic.servlet.jsp.JspcInvoker.checkCompliance(JspcInvoker.java:145)
Warning:      at weblogic.servlet.jsp.JspcInvoker.compile(JspcInvoker.java:198)
Warning:      at weblogic.application.compiler.AppcUtils.compileWAR(AppcUtils.java:376)
Warning:      at weblogic.application.compiler.WARModule.compile(WARModule.java:245)
Warning:      at weblogic.application.compiler.flow.SingleModuleCompileFlow.proecessModule(SingleModuleCompileFlow.java:18)
Warning:      at weblogic.application.compiler.flow.SingleModuleFlow.compile(SingleModuleFlow.java:36)
Warning:      at weblogic.application.compiler.FlowDriver$FlowStateChange.next(FlowDriver.java:69)
Warning:      at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
Warning:      at weblogic.application.compiler.FlowDriver.nextState(FlowDriver.java:36)
Warning:      at weblogic.application.compiler.FlowDriver.run(FlowDriver.java:26)
Warning:      at weblogic.application.compiler.WARCompiler.compile(WARCompiler.java:29)
Warning:      at weblogic.application.compiler.flow.AppCompilerFlow.compileInput(AppCompilerFlow.java:112)
Warning:      at weblogic.application.compiler.flow.AppCompilerFlow.compile(AppCompilerFlow.java:37)
Warning:      at weblogic.application.compiler.Appc.runBody(Appc.java:203)
Warning:      at weblogic.utils.compiler.Tool.run(Tool.java:158)
Warning:      at weblogic.utils.compiler.Tool.run(Tool.java:115)
Warning:      at weblogic.application.compiler.Appc.main(Appc.java:262)
Warning:      at weblogic.appc.main(appc.java:14)Thanks & Regards,
Santosh

So what was the problem? How did you resolve it?
--Chris

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

Error when opening User and Group Preferences

After upgrading to Lion there is an error when opening User and Group Preferences.
I´ve repaired permissions but the problem is still there...
Thanks...

Hi,
Double click on ur webdynpro application.Go to application properties tab.create new application property,select predefined property->browse->it will open a popup->select expiration time->give the value for expiration time.
or
Refer the note : [842635|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=842635&nlang=EN&smpsrv=https%3a%2f%2fwebsmp206%2esap-ag%2ede]
Hope it helps,
Reward points if helpful.
Regards,
Shailesh Nagar

Error when opening Crystal Reports

Hi
I'm getting an error when opening Crysta R. from SAP 2007. Crystal version is 2008 and the error is something like this: The title of the wirndow is: Microsoft .NET Framework. Message: Exception not controlled in application. If you click continue the applicaction will avoid the error...etc.
Any suggestions?

Have you installed the 1.1, 2.0 and 3.5 Framework?
Check your C:\Windows\Microsoft.NET\Framework and verify you have them all. If not go to Microsoft's site and install them.
Thank you
Don

Error when opening iWeb 09

After using iWeb 09 since it was released, I now get this error when opening the app.
Can’t open file “/Applications/iWeb.app/Contents/Resources/Themes/Cloud 9.webtheme/Spanish.lproj/Podcast.webtemplate.”
I have tried opening from and external back up hard drive and also use Time Machine to replace the iWeb on my internal hard drive.
What's next?

Hi there. I think I am having a similar problem. I was looking at some files in iWeb, but I don't believe I changed this one. I changed one of the "playtime" theme files, but then I changed it back. Anyway, I did look at the Modern Frame theme files but I didn't change them because I use them for a couple of my sites, and I was afraid to change anything. Maybe I did by accident? Anyway, here is the error I received.
Can’t open file “/Applications/iWeb.app/Contents/Resources/Themes/Modern Frame.webtheme/da.lproj/About Me.webtemplate.”
I am unable to open iWeb at all. That'll teach me.
Thanks!

Error when open Resouse Viewer form NEBC

Hi experts,
I facing a error when opening Resouse Viewer from NWBC.
Could you kindy provide some ideas or suggestiongs, Thanks in advance.
Best Regards,
Matthew He

Hello,
the SAP Visual Business frontend component requires the FPM application to run in a browser mode 'standard'. You can press F12 in your browser to adjust this.
Check note 1987004 to adjust the default mode for the application.
In addition, it is important to check the SAP VB installation guide for the right NWBC and browser version.
Hope this helps,
Marcus

HTTP_POST - Error when opening an RFC connection

Performing POST-query. Works well in simple program, and in WebDynpro application:
<i>Error when opening an RFC connection</i>
l_dest      = 'SAPHTTP'.
    CALL FUNCTION 'HTTP_POST'
      EXPORTING
       absolute_uri                       = l_uri
       rfc_destination                    = l_dest
       user                               = l_username
       password                           = l_password
       blankstocrlf                       = 'Y'
      REQUEST_ENTITY_BODY_LENGTH        =
      PROXY                             =
      PROXY_USER                        =
      PROXY_PASSWORD                    =
     IMPORTING
       status_code                        = l_status
       status_text                        = l_statustext
       response_entity_body_length        = l_rlength
      TABLES
       request_entity_body                = req_body
       request_headers                    = req_headers
       response_entity_body               = res_body
       response_headers                   = res_headers
     EXCEPTIONS
       connect_failed                    = 1
       timeout                           = 2
       internal_error                    = 3
       tcpip_error                       = 4
       system_failure                    = 5
       communication_failure             = 6
       OTHERS                            = 7
Edited by: S S on Nov 28, 2008 4:01 PM

You can't use SAPHTTP for the destination. This RFC destination uses the SAPGUI to make the HTTP call. Either use SAPHTTPA (the A stands for Application Server) or better yet use the newer CL_HTTP_CLIENT class. The class uses the ICM instead of a standalone executable to make HTTP calls.

Memory full - error when open a Peoplesoft crystal report 9/10

Post Author: damisetty
CA Forum: General
Greetings!
We are gettign Memory Full error when open few of the delivered crystal reports. We are using Crystal 9 bundled with peoplesoft, i tried to open with Crystal 10, but same error.
Could any one help me out?
Thanks in advance.
Naga

Are you a Developer or QA or end user? Have you discussed this with your Developer at all? We seem to keep going around in circles. Your Developer should know what he did and how to deploy your app and CR assemblies and what to use.
Subject line is VS 2010, CR for VS 2010 is the only version supported in VS 2010. CR 2008 doesn't have 64 bit runtime. therefore it's not an option, your WEB Servers app pool MUST run in 32 bit mode only if you are using CR 2008.
"If I install the 64 bit version of SAP CR. Should the assembly change in the aspx files? different version number?" Nothing in your app, just deploy the 64 bit runtime and set your app pool to run in 64 bit mode.
If you are using CR for VS 2010 then you can run your WEB server in 64 bit mode and use CR for VS 2010 64 redist files on your WEB server. Then all DB Drivers, Printers and anything else MUST be installed in 64 bit versions. This includes what ever dependencies your UFL has, they too must also support 64 bit platform.
NO Additional requirements to be done or used for 64 bit WEB applciations, just requires IIS App Pool to be run in 64 bit mode and all dependencies available in 64 bits. ODBC DSN is created using the 64 bit ODBC Administrator, Printers support 64 bit applications.
And your UFL and any of it's dependencies must be located in as well as GAC'd if it's required, once again check with your UFL developer:
C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win64_x64
I suggest you purchase a support case and work with one of our Rep's to sort this out.
http://store.businessobjects.com/store/bobjamer/en_US/DisplayCategoryProductListPage&CategoryID=55987300
Don
Edited by: Don Williams on Oct 20, 2011 1:35 PM

Getting 500 Internal Server Error when opening GC page

There was no change in configuration and all of a sudden, I can not connect to GC. I did notice that OC4J for OC4J_EM is down and I can't get it to go "Alive". Can someone run opmnctl status and print the output for me?
I'm on Windows 2003/GC 10.1.0.4. Anyone has seen this problem?
Cheers,
Rodney

Exact error when opening page is:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
Bruno

Hi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James

Error when opening an RFC connection (LB : Hostname or service of the messa

Hi All,
Im trying to transport datasources in BW, they are 7.x RSDS datasources. but we did not change the source system, it was existing and we are using the same source for older BW version. we now installing new BW 7.x system.
These transports went fine in BQ system but failing in BP system with the below error :
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when activating DataSource 2LIS_17_I0NOTIF RP1CLT100
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when resetting DataSource 2LIS_17_I0NOTIF RP1CLT100 to the active version
the datasource 2LIS_17_I0NOTIF is active in RP1CLT100 system. when this transport goes to prod it tries to overwrite the existing one, as there are no changes to the datasource the structure will be the same.
but after that it cant able to activate that datasource.
so my question is can we able to activate this datasource in RP rather than doing transport again from R/3 Dev---R/3 PRD.
i tried RSDS_DATASOURCE_ACTIVATE_ALL but it doesn't help.
another question is when we migrate from 3.x datasource to 7.x, does this change any metadata in R/3 system as well.
Best Regards
Robyn.

Hi Rizwan,
Looking at the error message it seems like there is some issue with RFC connection and whatever objects you are trying to move are not reaching to target system. Just have a check with basis team.
Once you migrate DS from 3.x to 7.0 yes there will be some meta data changes e.g. the DS type will be changed from ISFS to RSDS. You will have to send the migration along with current data source.
Regards,
Durgesh.

Error when opening applications

Similar Messages

Maybe you are looking for