Error when opening Capacity Planner and Performance Manager
Hello,
I am having an error when opening Performance Manager or Capacity Planner under 9i OEM in our environment. I started at the company about 2 months ago, and have not used these tools until yesterday - and just found these errors. Below is a link to a screenshot of the errors. Does anybody have any ideas?
http://www.webgenstudios.com/misc_images/ora1.jpg
Thanks,
-Bob
Which are the contents of the log file produced during installation of OEM...????
OEM was installed on its host machine about 4 years ago, long before I started with this company. I don't know if the logs are still there or not. Where should I be looking?
Do all other parts of OEM operate successfully...????
Yes, everything besides Cap Planner & Perf Mgr.
Is this in Standalone Mode or Oracle Management Server Mode?
The issue occurs in both modes.
Similar Messages
-
FQDN error when opening Alert confi and Alert inbox
Hi PI Gurus,
When I go through RWB & try to open alert config & alert inbox I get an 'Business Server Page (BSP) error'
when I open from sicf I am able to open alert inbox.
How can I open alert config?
Thanks,
KrishnaHi Krishna,
Ref: /people/brian.mckellar/blog/2003/09/25/bsp-in-depth-fully-qualified-domain-names
Ref these weblog;
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
Additional Info:
Roles for Alert Management
1. SAP_ALM_ADMINISTRATOR
2. SAP_ALM_CUSTOMIZER
3. SAP_BC_ALM_ALERT_USER
Sap Notes - 913858 and 824039
http://help.sap.com/saphelp_nw04/helpdata/en/3f/81023cfa699508e10000000a11402f/content.htm
Thanks, -
Hi
I encounter a problem on a windows XP laptop using acrobat 11.0.09.
When i try to open a .pdf document i get an windows error message.
The document open well else, but i get persistent windows error message then, and i get them even if i close this document.
When i look application event i have this :
Nom de l’application défaillante acrord32.exe, version : 11.0.9.29, horodatage : 0xsyntpfcs.dll
Nom du module défaillant : 7.5.19.5, version : 00001599, horodatage : "a long string"
Code d’exception : 0x%7
Décalage d’erreur : 0x%8
ID du processus défaillant : 0x%9
Heure de début de l’application défaillante : 0x%10
Chemin d’accès de l’application défaillante : %11
Chemin d’accès du module défaillant: %12
ID de rapport : %13
I try to uninstall / reinstall acrobat without change, this error message still stay when i open a pdf document.
cordialyHi ,
I solve my problem :
1- chkdsk /f to test the disk => nothing particular
2- I use defraggler to defrag the harddrive ( was very fragmented)
I thing this two step doesn't change anything.
3- then i use Adobe Reader Acrobat Cleaner Tool and restart laptop
4- Reinstall Adobe Reader.
5- I just let reader11.0 folder in c:\program files\Adobe and delete other old reader folder.
6- did same in c:\documents and settings\%username%\application data\adobe\acrobat\
seems to work know
will survey to be sure and back to confirm
thank -
HI,
I am facing a big problem every now and then and It is intermittent is what i have seen.
I keep getting be bleow error messare on my MDS Explorer. I am having MDS2012 installed both UI and excel addin gives error
My machine is a 2008 R2 Enterprise Web Server x64
I have checked my Authentication settings, and Windows Auth is enabled for the site and for Services folder and so is Anonymous on Services folder.
The error happens both on the machine itself and from a client machine.
The Same time excel addin throws the below error
But when do a complete Restart of the server or Do a IISRESET on the server by going to >> RUn >> IISRESET ,
it starts working back normally. But this keeps happening very often. How to solve this . It is getting irritating for customers to use it. Please help.
This is the log details say:
===================================
The requested service, 'http://ausapexweb01:81/service/service.svc/bhb' could not be activated. See the server's diagnostic trace logs for more information.
Program Location:
Server stack trace:
at System.Runtime.AsyncResult.End[TAsyncResult](IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.SendAsyncResult.End(SendAsyncResult result)
at System.ServiceModel.Channels.ServiceChannel.EndCall(String action, Object[] outs, IAsyncResult result)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeEndService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at Microsoft.MasterDataServices.AsyncEssentials.AsyncResultBase.EndInvoke()
at Microsoft.MasterDataServices.AsyncEssentials.AsyncExecuter`1.EndExecute(IAsyncResult ar)
at Microsoft.MasterDataServices.ExcelAddInCore.ConnectionManager.<>c__DisplayClasse.<TestConnectionAsync>b__c(IAsyncResult ar)
at System.Threading.Tasks.TaskFactory.FromAsyncCoreLogic(IAsyncResult iar, Action`1 endMethod, TaskCompletionSource`1 tcs)Hi Tejaswini,
Please refer to the following article to troubleshoot this issue:
http://blogs.technet.com/b/beatrice_popa/archive/2013/01/31/master-data-services-issue-with-https-error-message-httpwebrequest-webexception-remoteserver-arguments-notfound-debugging-resource-strings-are-unavailable.aspx
Regards,
Elvis Long
TechNet Community Support -
Keep getting application Manager missing or damaged error when opening application
Application missing or damaged error when opening application.
Tried CC cleaner
Tried uninstalling and reinstalling
Tried Short file name
Tried AAM patch
Tried installing Creative Cloud
Just plain frustrated not getting this software to work.What version of Premiere Elements is involved?
Premiere 12
And, on what computer operating system is it installed?
Windows 8
What are you doing when you get this message about the Adobe Application Manager?
Opening the application (Premiere)
Have you tried in install the Adobe Application Manager from the following link?
for Windows
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager
for Mac
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4774
Yes
Tried CC cleaner
Tried uninstalling and reinstalling
Tried Short file name
Tried AAM patch
Tried installing Creative Cloud
Thank you for the assistance. -
I want to use my IPOD Classic 160gb for notepad entries in addition to the music and books I listen to. It is set to "Open ITunes when connected to computer" and "manually manage music and videos". How can I do that without losing some of the features of those two? I just want to add a feature. Thanks
Settings>Store (or iTunes & App Stores if you are running iOS6)>Apple ID. Tap your son's ID and sign out. Sign in with your ID and password.
You shouldn't lose the music, but if you try to update any apps that you bought with the family ID, you will have to use that password that is linked with that ID in order to update.
Avoid downloading past purchased content with the old ID if you can since you will associate the iPad with the old ID for 90 days and you will lock yourself out of your own, new ID for that period of time. Read more about associated devices in iTunes here.
iTunes Store: Associating a device or computer to your Apple ID -
Error when opening User and Group Preferences
After upgrading to Lion there is an error when opening User and Group Preferences.
I´ve repaired permissions but the problem is still there...
Thanks...Hi,
Double click on ur webdynpro application.Go to application properties tab.create new application property,select predefined property->browse->it will open a popup->select expiration time->give the value for expiration time.
or
Refer the note : [842635|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=842635&nlang=EN&smpsrv=https%3a%2f%2fwebsmp206%2esap-ag%2ede]
Hope it helps,
Reward points if helpful.
Regards,
Shailesh Nagar -
Error when opening iTunes : iTunes has stopped working '' A problem caused the program to stop working correctly''.
When I repaired damaged files the problem still exists and also after uninstalling, redownloading and reinstalling iTunes.
My pc is working with windos 8.
Is there a solution?Hey there Rodney274,
It sounds like you are getting an error from iTunes when you launch it. I would try the troubleshooting in this article named:
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
Start with troubleshooting for 3rd party plug ins section, then the rest of the article if needed:
Start iTunes in Safe Mode
Open iTunes in Safe Mode to isolate any interference from plug-ins or scripts not manufactured by Apple.
Hold down Shift–Control while opening iTunes. You should see a dialog that says "iTunes is running in safe mode" before iTunes finishes starting up.
Click Continue.
See if the issue you're experiencing persists in Safe Mode.
If you have the same issue while iTunes is in Safe Mode, proceed to the "Create a new user account" section. If you don't experience the same issue, follow these steps to remove third-party plug-ins.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Error when opening: "DiscoBrick 1.60. Unable to locate the <> plugin. Repair permissions and retry."
I also got this error this morning. DiscoBrick is just a visual plug-in for itunes that i don't even use, so i just uninstalled it and that solved my problem.
Go to MacHD/Library/iTunes/iTunes Plug Ins/ then delete DiscoBrick.
If you still want it you could try re-installing it again
Glen. -
I get missing plug-in error when opening my online bill which is in PDF format. I am using a 2010 Macbook with the latest version of Safari and Adobe suite installed in my computer. Why do I get this error? What should I do?
In relation to my previous inquiry regarding inability to view a pdf file using Safari...
Is it possible that I can view other online bills from other website but not this particular bill from one specific website?
Sorry if I missed any important point in this article -->Apple Safari 5.1 and Adobe Reader/Acrobat Advisory
Thanks again! -
I'm getting an error message "There was an error when opening this document. Access denied" on some PDF's that I was able to open in past. Uninstalled XI and installed X but same problem. How can I access these files?
I have exactly the same problem. The interesting thing is that the file opens when I attach it to an email and open it out of the email. I already saw the advice you provided in similar post from Aug last year and checked the security settings of the file and the folder. But according to that I have all rights.
My OS is Windows 7 Enterprise. -
WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection
Hi all SDNers,
Help is needed on error "WORKLOAD ANALYSIS (INTROSCOPE DATA) - Error when opening an RFC connection".
This error occured on RCA -> Extractor FWK administration and go to managed system (PI) and from the log, i can see some extraction failed due to error message " Error when opening an RFC connection"
consequently, JAVA performance data is not appearing in RCA -> workload analysis but work fine for ABAP and adapter engine.
I've followed below notes and perform the troubleshooting step by step by still to no avail:
Note 1332428 - Missing data in service sessions from BI/CCDB
Note 1257308 - FAQ: Using EarlyWatch Alert
Note 1274287 - End-to-End Diagnostics 7.0 EHP1 SP18 to SP27
Note 1265070 - Diagnostics - Setup of Managed Systems
Note 1010428 - End-to-End Diagnostics
http://wiki.sdn.sap.com/wiki/display/SMSETUP/WorkloadAnalysis-Noapplicabledatafound
steps that have performed:
restarted agent
enlarge RFC resource cap for solmandiag and none
delete entire SID in SMSY and pull again from SLD, re-setup managed system
restart PI system
i've spent 2 days on troubleshooting this issue but lack of information in SMP and SDN, even in google.
in table E2E_EFWK_STATUS and extractor E2E_JAVA_EXTRACTOR_IF, i see all WLI_ID ended with RC 96, MESSAGE = Error when opening an RFC connection and LASTRECORDS = 0
I strongly believe this is the issue that causing no applicable data found for JAVA data.
fyi, we are on SOLMAN EHP1 SPS27.
Any kind advise is most welcome.
Thanks,
Nicholas ChangGosh! at last i found the solution!!
I appreciate those who tried to help and i''m sharing the solution as i believe this is the purpose of SDN Forum and help others Netweaver Chap who facing the same problem:
Problem faced:
Extractor failed intermittently for WORKLOAD ANALYSIS (Introscope Data) due to error message "Error when opening an RFC connection"
Due to the above error, performance data is not available in RCA workload analysis for J2EE engine.
Possible Solution:
1) Ensure both webadmin & SOLMANDIAG RFC working fine -> SM59 -> TCP/IP
2) go to SE16 -> E2E_RESOURCES and change the resourcecap to 10 for SOLMANDIAG
3) go to /smd/services -> Diagnostic System -> Advanced Setup -> Abap connectivity -> Connection Configuration and change server count to 10
4) Restart webadmin (step 3 & 4 can perform in VA too)
5) set gw/keepalive & gw/reg_keepalive to value 0 in RZ11 (without reboot of instance)
5) again go to SM59 -> TCP/IP -> SOLMANDIAG and put in the gateway host and gateway service correctly, don't leave this empty!!!! -
> This is the main solution to solve intermittent failed RFC for extractor.
Now, go back and monitor the extractor log and you should see no RFC error anymore and wait for 1 hour for the data to populate.
Thanks!
Nicholas Chang, -
Error when opening table container file keydb read only
Hi Guys,
We are installing solution manager 4.0 on windows/sql but we are getting following error and couldnt continue the installation
FKD-00070 Error when opening table container file C:\PROGRA1\SAPINS1\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml for writing. Possible reason: "read-only"
ERROR 2008-06-04 20:10:56.843
FKD-00049 XML - Parser error: error: no DTD specified, can't validate in line 1, 1
in file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml.
Please help
Regards,
SantoshFurther info
keydb.xml is empty and the directory has got write access for everyone
regards
Edited by: Santosh Keerti on Jun 4, 2008 1:29 PM -
Error in Local Message System: Error when opening an RFC connection Message
Hi Gurus,
We are not able to create support messages in our ECC production system but it can created in Development and Quality. Support message created appears in solution manager system. ECC System displays error message as
Error in Local Message System: Error when opening
an RFC connection Message was Not Created
I have checked RFC connection between ECC and Solution Manager which displays following message
Logon Connection Error
Error Details Error when opening an RFC connection
Error Details ERROR: partner "local:sapgw00' not reached
Error Details LOCATION: SAP-Gateway on host local / sapgw05
Error Details DETAIL: NiPConnect2
Error Details CALL: connect
Error Details COMPONENT: NI (network interface)
Error Details COUNTER: 40142
Error Details ERROR NUMBER: 10060
Error Details ERROR TEXT: WSAETIMEDOUT: Connection timed out
Error Details MODULE: nixxi.cpp
Error Details LINE: 2835
Error Details RETURN CODE: -10
Error Details SUBRC: 0
Error Details RELEASE: 701
Error Details TIME: Wed Jan 11 23:26:54 2012
Error Details VERSION: 38
Kindly Help.....Hi
Based on the instance number of the servers, you can determine the gateway to be used.
IF your ECC instance number is , 01 then gateway would be , sapgw01 (in ECC system)
So check and change the settings accordingly, in the RFC connection. Also check, if this entry sapgw01 is made in /etc/service file. Also check, in transaction smgw for gateway parameters.
Hope this info helps,
~ Raj -
Error when opening RFC Connection
Hello SAPers,
I have configured PDA in my ECC6.0 --- XI (ABAP+JAVA) Which was successful.
In my Web Dyno Pro Content Administrator
I have performed the JCO Destinations test which was successful
when I go to the URL
http://server:port/webdynpro/dispatcher/sap.com/isisrsrsmenapp/MainApp
entered the store number
In the next menu
Inventory Lookup when I enter the Article number and press Go Button
It is giving me error " Error when opening RFC Connection "
Rest of them working perfectly...
Do I need to do any configuration In Visual Admin?
Could anyone advice
Thanks In Advance
HariKrishnaThanks it got solved it was an error in RFC, I have changed the RFC now it is working fine
Thanks
Hari
Maybe you are looking for
-
Hi I just went from PC to MAC. Have a MAC Mini and wanted to get a time capsule for backups. I would like to use it as a wired device instead of wireless. Would me connecting it to my router do the trick? Can I then use the LAN ports in the back of t
-
ABAP code for calculation rule in TK = M/08
Hi, In M/08 transaction, we need the following: When maintaining a PO, the user manually creates a condition like this: ZXXX Value (+10 %) positive value. However, in order to get the belonging negative condition (for accounting purpose), we need
-
HP Laserjet1012 only prints Not For Commercial Use
Have HP Laserjet 1012 installed on Dell Latitute E6410 running Windows 7. Found a You Tube video for setup. Using port DOT4_001, and HP Laserjet0355 PCL5(Microsoft) driver. Problem: whentyou print test page, the printout has a black background a
-
NEED HELP FOR INTERACTIVE REPORT..PARAMETERISED
I have a report which output is displayed after a field is selected from select list.. The output of query is empty .. This is the query .... it doesnt work when i try to put the value of variable in other page...and call it from the query like below
-
How can i send email to team when opportunity is assigned
Hi, I need to send email to opporunity team when team is assigned. Here is what I did. created new workflow on oporuntity team record type. when new record saved. problem is in Action send email option 'TO' field have only 2 options specific user spe