Error when opening CS6 Beta

I downloaded CS6 and when I double click to open the dmg file, I get the error photoshopcs6_p1_mac_no _mountable_file systems. What should I do in order to be able to open the application?

I didn’t have any trouble installing it .. Only when I open it to use it.. I’m thinking it might have been one of the plug-ins that I transferred from CS5 .. The migrate didn’t work so I copied the folder contents and pasted them in CS6 so I don’t know which one it might have been.. The reason that I think that is because it said could not load Fastcore Routines It does not work in this version also the Multiprocessor support Module does not work in this version...
I have a home built 64bit quad and more ram and space that can even use... and it even has extra bays to add additional memory or other disc as required... I run windows7 Ultimate..
Thanks,
Cindy Mc

Similar Messages

Adobe Application Manager error when opening CS6

I downloaded and installed CS6 beta.
When I open CS6, I get this error: Adobe Applicatin Manager required to verify your license is missing or damaged. Please download a new copy ...
I downloaded the new copy but when I open CS6, I get the same error.
Now what?

Hi pjjkt
I'll forward this to the install gurus to see what they can figure out.
Pattie

HTTP_POST - Error when opening an RFC connection

Performing POST-query. Works well in simple program, and in WebDynpro application:
<i>Error when opening an RFC connection</i>
l_dest      = 'SAPHTTP'.
    CALL FUNCTION 'HTTP_POST'
      EXPORTING
       absolute_uri                       = l_uri
       rfc_destination                    = l_dest
       user                               = l_username
       password                           = l_password
       blankstocrlf                       = 'Y'
      REQUEST_ENTITY_BODY_LENGTH        =
      PROXY                             =
      PROXY_USER                        =
      PROXY_PASSWORD                    =
     IMPORTING
       status_code                        = l_status
       status_text                        = l_statustext
       response_entity_body_length        = l_rlength
      TABLES
       request_entity_body                = req_body
       request_headers                    = req_headers
       response_entity_body               = res_body
       response_headers                   = res_headers
     EXCEPTIONS
       connect_failed                    = 1
       timeout                           = 2
       internal_error                    = 3
       tcpip_error                       = 4
       system_failure                    = 5
       communication_failure             = 6
       OTHERS                            = 7
Edited by: S S on Nov 28, 2008 4:01 PM

You can't use SAPHTTP for the destination. This RFC destination uses the SAPGUI to make the HTTP call. Either use SAPHTTPA (the A stands for Application Server) or better yet use the newer CL_HTTP_CLIENT class. The class uses the ICM instead of a standalone executable to make HTTP calls.

Javascript error when opening CS3 on pc..?

I cannot open ID on my CS3 package using my pc. The error appears twice in a box on screen stating
'JavaScript Error'
'Error Number 45'
'Error string :Object is Invalid'
'Line 387'
also
'JavaScript Error'
'Error Number 45'
'Error String; Object is Invalid'
'Line 428'
there was a problem initially due to program plug-ins reported missing so i tried going onto 'Help' and clicking on 'Configure Plug-Ins' from the drop down menu.
Not sure what i did.. but now i cannot use ID as it shuts down after the javascript errors are reported.
Anyone help?

hi
thanks for all the helpful info
i tried to reinstall INDESIGN only... didnt work same problem.
i tried by uninstalling INDESIGN and then reinstalling it only.... didnt work same problem.
I guess im going to have to do a full reinstall.. not a problem, do i need to contact yourselves to get clearance for a reinstallation?
I had a hard drive crash about 6 months ago and had to reinstall, had to phone Adobe and get an online clearance as id exceeded my sole installation for my CS3 hard copies.
thanks again
Date: Sat, 2 Jan 2010 09:50:57 -0700
From: [email protected]
To: [email protected]
Subject: Javascript error when opening CS3 on pc..?
I'd bet the original scenario was something like you tried to open a file and saw a message that you were missing plugins, or they were out of date, and that you should update or upgrade. That's the typical message you get when you try to open a file saved from a newer version of ID. Unfortunately it's quite misleading -- nothing you do to the plugins will help you in that case, and trying to use newer versions would be disastrous.
You should be able to selectively reinstall just ID. If you have the DVD you can run the installer and do a "Repair" installation, and if that doesn't work, you should be able to uninstall ID, then reinstall without removing the whole suite. If that still doesn't work, bite the bullet, uninstall everything and run the clean script (http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402767&sliceId=1), then reinstall. I'm not sure what happens with a downloaded installer, but I suspect it works the same. I'm pretty sure I read somewhere that to uninstall from a download you need to have it in the same location as was originally used for the installation.
Peter
>

Multiple JavaScript errors when opening aspx file in Dreamweaver

I get multiple javascript errors when opening aspx file in Dreamweaver similar to... "While executing translateHyperLink in ExternalRenderers.htm, a JavaScript error occurred."

Hi Steven,
Not sure if this is related, but can you try the solutions in Troubleshoot JavaScript errors | Dreamweaver CS4, CS5, CS5.5, CS6
Thanks,
Preran

Error When Opening Any Form

Hi All.,
Im facing some issue while opening any form..its stuck in below mention file while opening any form i tried all the ways still im not able to fix the issue.
Application:11.5.10.2
OS-----------HP-UX
DB-----------10.2.0.4.0
File Name:
oracle/forms/ui/FLWTextArea
Work Around
Relink the all the files
Regenerated the jar files
Regenerated the forms
f60gen help=y
Forms 6.0 (Form Compiler) Version 6.0.8.28.0 (Production)
Forms 6.0 (Form Compiler): Release - Production
(c) Copyright 1999 Oracle Corporation. All rights reserved.
PL/SQL Version 8.0.6.3.0 (Production)
Oracle Procedure Builder V6.0.8.21.0 Build #0 - Production
Oracle Virtual Graphics System Version 6.0.5.39.0 (Production)
Oracle Multimedia Version 6.0.8.25.0 (Production)
Oracle Tools Integration Version 6.0.8.17.0 (Production)
Oracle Tools Common Area Version 6.0.5.32.0
Oracle CORE Version 4.0.6.0.0 - Production
Metalink Doc id
java.lang.NoClassDefFoundError: oracle/forms/ui/FLWTextArea Error When Opening Any Form [ID 1219663.1]

Thanks,
From the below doc id we are currently in patch set 19 but im not able see that in ad_bugs.,
Note: 232313.1 - Information on Previous Versions of Developer 6i Patchsets
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=232313.1
Here is an example:
If you have Forms: 6.0.8.27.x --> You are on Developer 6i Patch 18
If you have Forms: 6.0.8.26.x --> You are on Developer 6i Patch 17
If you have Forms: 6.0.8.25.x --> You are on Developer 6i Patch 16
If you have Forms: 6.0.8.24.x --> You are on Developer 6i Patch 15
SQL> select bug_number from ad_bugs where bug_number='&BUG_NUMBER';
Enter value for bug_number: 9935935
old 1: select bug_number from ad_bugs where bug_number='&BUG_NUMBER'
new 1: select bug_number from ad_bugs where bug_number='9935935'
no rows selected
SQL>

Getting 500 Internal Server Error when opening GC page

There was no change in configuration and all of a sudden, I can not connect to GC. I did notice that OC4J for OC4J_EM is down and I can't get it to go "Alive". Can someone run opmnctl status and print the output for me?
I'm on Windows 2003/GC 10.1.0.4. Anyone has seen this problem?
Cheers,
Rodney

Exact error when opening page is:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator, [email protected] and inform them of the time the error occurred and anything you might have done that may have caused the error. More information about this error may be available in the server error log.

Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679

Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
Bruno

Hi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James

Error when opening an RFC connection (LB : Hostname or service of the messa

Hi All,
Im trying to transport datasources in BW, they are 7.x RSDS datasources. but we did not change the source system, it was existing and we are using the same source for older BW version. we now installing new BW 7.x system.
These transports went fine in BQ system but failing in BP system with the below error :
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when activating DataSource 2LIS_17_I0NOTIF RP1CLT100
Error when opening an RFC connection (LB : Hostname or service of the message ser
Error when resetting DataSource 2LIS_17_I0NOTIF RP1CLT100 to the active version
the datasource 2LIS_17_I0NOTIF is active in RP1CLT100 system. when this transport goes to prod it tries to overwrite the existing one, as there are no changes to the datasource the structure will be the same.
but after that it cant able to activate that datasource.
so my question is can we able to activate this datasource in RP rather than doing transport again from R/3 Dev---R/3 PRD.
i tried RSDS_DATASOURCE_ACTIVATE_ALL but it doesn't help.
another question is when we migrate from 3.x datasource to 7.x, does this change any metadata in R/3 system as well.
Best Regards
Robyn.

Hi Rizwan,
Looking at the error message it seems like there is some issue with RFC connection and whatever objects you are trying to move are not reaching to target system. Just have a check with basis team.
Once you migrate DS from 3.x to 7.0 yes there will be some meta data changes e.g. the DS type will be changed from ISFS to RSDS. You will have to send the migration along with current data source.
Regards,
Durgesh.

Error when opening an RFC connection in IDT

Hi Experts,
I m trying to create a relational connection (JCO) from IDT to BW 7.4, and I m getting the following error:
Error when opening an RFC connection (CPIC-CALL: ' ThSAPOCMINIT', communication
I searched this error in Internet and I found many discussions about it ...And I think it's about autorizations in BW system that by default dosen't allow external servers to connect to it.
So, I changed the values for the following parameters in RZ11 t-code:
gw/acl_mode = 0
gw/reg_no_conn_info = 0
But I still get the same error ...When I checked the SM59 t-code I found that IDT create an entry in TCP/Ip connections ...
Can you guide me to solve this issue...
BW server is 7.4 version on AIX OS
BO server is 4.1 SP05 on windows system
Thank's a lot for your help.
Abdess,

Hi,
test the RFC connection in sm59.If it is sussecfull then try to create conneciton otherwise see the error message.
Amit

Error when opening table container file keydb read only

Hi Guys,
We are installing solution manager 4.0 on windows/sql but we are getting following error and couldnt continue the installation
FKD-00070 Error when opening table container file C:\PROGRA1\SAPINS1\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml for writing. Possible reason: "read-only"
ERROR 2008-06-04 20:10:56.843
FKD-00049 XML - Parser error: error: no DTD specified, can't validate in line 1, 1
in file C:\Program Files\sapinst_instdir\SOLMAN\SYSTEM\MSS\CENTRAL\AS\keydb.xml.
Please help
Regards,
Santosh

Further info
keydb.xml is empty and the directory has got write access for everyone
regards
Edited by: Santosh Keerti on Jun 4, 2008 1:29 PM

Error When Opening the Setup/Transactions/ Sources Window

Hi All,
in Oracle E-Business Suite R12 Version
Error When Opening the Setup/Transactions/ Sources Window
APP-FND-01388: Cannot read value for profile option FND_DEVELOPER_MODE in routine &ROUTINE.
ORA-01403: no data found
FRM-40735: WHEN-CREATE-RECORD trigger raised unhandled exception ORA-06502.

Amr,
Please see the suggested solutions in these docs.
App-Fnd-01388: Cannot Read Value For Profile Option Fnd_developer_mode In Routine [ID 563884.1]
R12: How To Avoid The Error Message APP-FND-01388 On Drilldown [ID 556668.1]
R12 APXINWKB Error APP-FND-01388 When Trying To Query Invoice [ID 864195.1]
APP-FND-01388 Cannot Read Profile Option FND_DEVELOPER_MODE In Benefits Service Center Form [ID 422182.1]
Thanks,
Hussein

Error when opening document with ECL control: INVALID_DATA

Hi Gurus,
I've tried to search the net for this problem but could not find anything and I'm stuck now.
Description:
we're using ECL to view attached documents (to POs etc.) which are stored through ArchiveLink on the content repository.
when we try to open this document, time-to-time we get following error:
Error when opening document with ECL control: INVALID_DATA
Message no. SDV004
by time-to-time I mean that when we try to open same attachment again it opens successfully (sometimes we need to re-open it 3-4 times to get it)
what we've tried is to enlarge timeout for HTTP protocol (tx SMICM, from former 30 to actual 60) but only effect we got is that we're waiting for the error longer time
It will be really great if anybody of you guys can give me an advice where the problem can be or where should I look and what to check
Thanks,
David

Hi Christoph,
thanks for tip, unfortunately this was already flagged, currently settings are:
for Display Settings:
yes - include ECL control
use HTML control
empty - maximum viewer wait time
(do you think that setting some value for this could help)
yes - deactivate generic object services in viewer
no - doc display as dialog box
yes - deactivate data provider cache
Storage Settings:
yes - always copy document class from document type
yes - permit multiple assignment
Thanks,
David

Error When Opening Document

I receive the following error when opening a Web Intelligence Document, no matter the user.
Cannot initialize Report Engine server. (Error: RWI 00226) (Error: INF )
I also cannot run any reports. Anyone have an idea? I cannot seem to find any information in the knowledgebase on that error.

Phasenjager,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Outlook 2010 gives error when opening a PowerPoint attachment.

Outlook 2010 gives error when opening a PowerPoint attachment.
Hi All,
We have several VIP employees that are getting the following error on all PowerPoint documents that come as attachments from Outlook.
I have researched and tried the following steps and verified these settings are already applied.
I did find a work around but not a fix and our security team will NOT allow me to change this setting however if I uncheck the setting all employees can open the outlook attachment.
Any other ideas on a fix for this if I am unable to uncheck Enable Protected View.

Hi Matthew,
This is a perennial problem, here is a thread which has a deep discussion about this issue:
http://social.technet.microsoft.com/Forums/office/en-US/07f710a5-a6ca-4256-8f27-6aac41a6b37e/outlook-2010-unable-to-open-word-excel-and-power-point-attachments-from-an-email?forum=outlook
It looks like nobady really find a solution there, the only workaround is what you have found - change the protected view setting in Trust Center. You will lose some security by doing this but it seems to be the only solid solution currently.

Error when opening CS6 Beta

Similar Messages

Maybe you are looking for