Error when outputting

When I go to output my file (File > Export > Media) I set everything up hit OK then Media Encoder opens and then I press "Start Que" and within seconds I get the little yellow triagle next to the Job. I click on it and notepad opens up the Error Log and It says:
Could not read from the source. Please check if it has moved or been deleted.
I have cehcked the path and the file is there. What the heck is going on?
Many thanks,
Houston
I have never had this problem before.

This very link that you suggested takes to mack to the Adobe article that started this post.
http://kb2.adobe.com/cps/407/kb407106.html
So I am back wher eI started.. I really dont want to have to reaload Adobe Suite. My God I don't have that kind of time. Can I just reload Premier PRO?
So you've already read that Adobe KB Article and have followed all suggestions? I saw no mention of that in the OP.
Well, if you ARE logged-in as Administrator, have followed the suggestions in the KB, it's probably time to follow the second suggestion in that second step, unless you are trying to edit to/from an external, or NAS, as Bill suggests.
Good luck, and sorry to send you a link that you have already followed with no success.
Hunt

Similar Messages

  • Getting an error when outputing with Autocad

    I have the latest Adobe viewer installed 10.1.1.  Yet I get an error when trying to output to a PDF.  It wasn't always this way. 
    error is; "No PDF viewer installed" 
    Please help

    Mac or Win? Can you open Reader? In any case, you cannot create PDFs with Reader, which is, well, very little more than a reader of PDF files.

  • Decode error when outputting to file to later burn to DVD

    I have an MPG file created in Ulead Media Studio Pro (which I can no longer run as it does not run on Windows 7 which my new PC uses).  I created a new project in PE9, added the mpg file, dragged it to the timeline and told Premiere to change the project settings to match. It is now PAL DVD Upper field first.  There is no red line on the timeline above the clip.  When I try to output it to a file for later burning to DVD I get a decode error around a particular frame.  When I go near that frame in the monitor window and step forward one frame at a time it moves smoothly until it gets to the frame in question when there is a noticeable delay from pressing the arrow button and the time counter updating to the next frame number.  The MPG plays fine in Windows Media Player and VLC player - it shows a cross fade transition at the spot that fails in PE9.  Is there anything I can do to fix this?  I don't have independent DVD authoring software as otherwise that would be an option.

    Depending on the source footage, I have found that some other programs do a better job of handling them. For that reason, I have CyberLink PowerDirector, and Magix MovieEdit Pro on my computer. Actually, since I use PrPro for most of my work, that is also why I bought and installed PrE - it handles footage well, that PrPro chokes on.
    Personally, I am less comfortable actually editing in PowerDirector, or MovieEdit Pro (older versions of both), but PrE is closer to PrPro, so I rely on it as my "first step," and the other two NLE's more as just converters.
    Still, if another tool in your video-editing toolbox, works better, there is zero shame in using it. Sometimes an adjustable spanner is all a mechanic needs, but when they require a universal socket with a "wobbly" extension on their Snap-On rachet, then the adjustable spanner goes back into the toolbox.
    Most of all, I am glad that you are able to produce the desired results. That is what it's all about.
    Thanks for reporting your workflow and your success. Good luck.
    Hunt

  • Error when sending report output to printer from Forms 10g

    Hi,
    I have a simple report that I am running from a form using run_report_object built-in. I can successfully send the report output to a file but when I send the report output to a printer my report is
    terminated with report status of 'TERMINATED_WITH_ERROR'. I am using the default forms service and reports server that comes with the forms builder. How do I specify the reports server to user my default network printer ?Following is the code that runs my report.
    Thanks,
    Anna
    PROCEDURE SEND_TO_PRINTER IS
    repid REPORT_OBJECT;
    v_rep VARCHAR2(100);
    rep_status VARCHAR2(50);
    rep_server system_variables.reports_server%type;
    alldone          exception;
    BEGIN
         select reports_server
         into rep_server
         from system_variables;
         if rep_server is null then
              msg_alert('Error getting the reports server name', 'I', FALSE);                
              raise alldone;
         end if;
         :ctrl.run_report_errors := 'N';                    
         repid := find_report_object('REP_OBJ1');
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_SERVER,rep_server);
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_EXECUTION_MODE,BATCH);
         SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
         IF :ctrl.rg_print = 'P' THEN
              --Send the output to printer.
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,PRINTER);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'dflt');
         ELSIF :ctrl.rg_print = 'R' THEN
              --Rich Text Format
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'rtf');
              SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESNAME,:ctrl.filename);
         END IF;
         v_rep := RUN_REPORT_OBJECT(repid);
         rep_status := REPORT_OBJECT_STATUS(v_rep);
         WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
         LOOP
              rep_status := report_object_status(v_rep);
         END LOOP;
         IF rep_status = 'FINISHED' THEN
              null;
         ELSE
              :ctrl.run_report_errors := 'Y';
              msg_alert('Error when running report.' || rep_status, 'I', FALSE);           
         END IF;
    EXCEPTION
         when no_data_found then
              msg_alert('Error getting the reports server name', 'I', FALSE);      
         when alldone then
              null;     
    END;

    If you use Windows the user that runs the reports server is usually LocalSystem. Check this in the Windows Services panel.
    LocalSystem has no printer access. To be able to print, you have to use a real domain user that has access to the printer. So, change the Log on properties in the Services panel.

  • SOLVED: Getting an Input/Output error when accessing certain files

    My system started failing a few days ago because of sudden Input/Output errors when trying to access certain files. It was running fine until various applications started crashing like for example Pidgin (in retrospect probably because of DBus crashing). I decided to reboot and now can't login anymore because the DBus module fails to load which in turn means that HAL doesn't load either and so I can't use my keyboard to login.
    The error message I get from DBus is that it can't access the file /etc/dbus-1/system.d/org.freedesktop.PolicyKit.conf because of an Input/Output error. I tried to fix/see what was wrong using the arch livecd. Because I thought my problem had to do with a pacman update that had failed before I'd rebooted, I updated my system and I noticed that when pacman tried to access other files it came back with the same error message. The files seemed pretty random, one of them was fakeroot.conf and then several library files like libfaad (sorry this is kind of vague but I'm away from home right now and can't go online very often so I'm writing this from memory).
    I'm guessing its a hard drive problem because checking the filesystem for errors came back with nothing. I was just wondering whether anyone had any other ideas before I go and reinstall. I'm going back home tomorrow so I'll be able to follow any advice/reinstall then.
    Last edited by siell (2010-04-08 17:01:37)

    UPDATE
    It seems to be fixed! The second run of e2fsck fixed some more issues and the files that were causing the problems earlier seemed to have bad inodes. Boots fine now and I can get into my system. I checked and I still have a reasonable amount of free space so I don't think that was the reason ... I have no idea how the filesystem got so corrupted out of nowhere.
    A few things are different, for example, it asked me to unlock the keyring and I couldn't mount my external encrypted drive anymore and had to do it manually with cryptsetup. e2fsck made quite a few changes so I imagine it's due to that. Shouldn't be to hard to fix though.
    Thanks for your help!

  • PDF Report Error When Distribute the Output?

    REP-0069: Internal Error.
    REP-57054: In-process job terminated:Executed successfully but there were some errors when distribute the output.
    REP-50159: Executed successfully but there were some errors when distribute the output.
    Approximately 5000 Pages
    Distribute PDF File Approximately 1700 Files
    How i can resolve this issue?

    Based that you are in base release I will encourage you to upgrade to the latest patchset for 10gR2 (10.1.2.3) and then apply the recommended bundled patch on top of 10.1.2.3 as several issues have been fixed with
    those patches.
    Reference
    Oracle Reports - Recommended Patch Bundle on Top of 10.1.2.3 (Doc ID 1162562.1)
    Regards RZ

  • IO error: Socket output stream shutdown by peer when trying to import DCs

    Hi,
    I am getting this error when trying to import DCs.
    com.sap.lcr.api.cimclient.CIMClientException: IO error: Socket output stream shutdown by peer
    I am specifying the SDM host, similar to J2EE URL I guess along with SDM port in Development configuration pool URL.
    Can some one guide me if I am missing some thing or some thinkg else is going wrong.
    Any help or suggestion will be very helpful to me.
    Thanks and regards,
    Chinnu

    Hi Nithn,
    Thank you for the response.
    It is due to issue in track configuration.
    Build Server and Repository server URLs are not Fully qualified domain names.
    Made a host entry and I was able to import the configuration.
    Thanks and regards,
    Chinnu

  • Input/output error when installing CS6 on my MacBook Air 10.10 Yosemite

    I have the CS6 disk and I keep getting input/output error when I try installing it on my new MacBook Air 10.10 with Yosemite.

    sounds like you have a damaged cd.
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
    window using the Lightroom 3 link to see those 'Important Instructions'.

  • Error when generating waveform analog output on NI 6704 card

    Hi, I am trying to understand why NI 6704 card appears to be incompatible with what I'm trying to do. 
    I want to use a waveform to generate an analog output voltage on a NI 6704. 
    I have a vi in the style of the waveform buffer generator in this example:
    http://zone.ni.com/devzone/cda/epd/p/id/4837
    which creates the waveform. In my main routine I attempt to create and write a DAQmx ao task using the waveform information, but get this error: 
    Possible reason(s):
    Requested value is not a supported value for this property. The property value may be invalid because it conflicts with another property.
    Property: SampTimingType
    Requested Value: Sample Clock
    You Can Select: On Demand
    Task Name: _unnamedTask<7D>
    According to documentation the 6704 has no onboard memory... but it's not clear to me how the DAQmx functions are actually sending the data to the card, i.e. if they are attempting to read and store the waveform buffer on to the card, it the lack of memory on the card could be my problem. Is is correct that that is part of my problem? Or since the error has to do with the sample timing clock, is my problem that the 6704  uses software timing? 
    I've run my program successfully on an NI 6225 card... are there any work arounds for generating such an output on a 6704? 
    Thanks in advance!

    The error has everything to do with software timing. Your device does not have a hardware clock so you get an error when you try to configure it. To output a waveform, you have to do out one point at a time. You can only do this at a low frequency and it will have considerable jitter.

  • New Output Module install generates an i/o error when running even on a single image.

    Adobe *had* removed the Output Module from Bridge, and I see now there is a (tedious) "manual" install to "reinstate" the module available online, but it is not functional. It generates an i/o error when running even on a single image.

    I'm afraid this is not helping the OP
    There are already to many having this I/O problem showing in several other threads and in this forum there is still no solution found. Can you pass this on to Adobe Tech please?
    Thanks

  • I get an input/output error when i try to restore a functioning backup from my external harddrive to my new internal harddrive through disk utility?

    my hardrive Had a smart status warning so i made a backup of it on my external harddrive through disk utility. i checked to make sure that the backup was working and i had no problems with it. i then bought a new internal harddrive and swaped it out but when i was in recovery mode to try to restore my new hardrive i kept getting an error message saying restore error, input/output error

    The big dilemma with a new Internal drive is separating Drive operation from 'inside the MacBook' operation. If you had an External Enclosure, you could do all the work (including booting up from the new drive) using the External enclosure.
    Then if a know-good drive develops problems only when moved inside the MacBook, it is time to try a replacement cable.

  • Error when "Issue output To" is done in VA23 transaction

    Hi All,
    I'm getting a error when "Issue output To" is done in va23 transaction, the message reads as follows "Element CONF_OUT window MAIN is not defined
    form ZVQUOTATION_3YR".
    But when i check the script the text element CONF_OUT is present in the main window
    Can u please tell me what is the reason for this.
    Thanks & Regards
    Santhosh

    Check in the driver program .when you calling the Write_form for this text element is the name proper ,check out the sapscript is activated .
    Please reward if useful.

  • Run time error when set filter on the request id in the output query.

    Hi all,
    I am getting a run time error when I select the request id and set filter on that and  when i am selecting all the request id it contains around 2lacs values in that If i cliked ok on that .
    It popped up a msg like this
    " Run time error 61706
    Insufficient memory to perform operation "

    User was educated not to select the entire data in the filter

  • REP-0081 error when emailing report output

    I am using RUN_REPORT_OBJECT to execute a report from a form. I have the report set up as a Report object in the form. The report runs fine to screen or to file, but I am getting an error when attempting to email report in batch mode:
    REP-0081: Error during file I/O operation.
    REP-0110: Unable to open file 'mpa02448.pdf'.
    scaba 14
    Execution Mode = Batch
    Report Destination = Mail
    Report Destination Name = [email protected]
    Report Destination Format = PDF
    I am able to send email to the same address via UTL_SMTP directly from the form, so it is not an email handler problem.
    Any ideas?

    I have verified the latest patches.
    Addresses are indeed in Windows address book.
    As far as verifying permissions on the file, the file does not exist. It would appear that the error is generated when creating the PDF file, before emailing occurs. Again, however, I do not have problems writing to file directly.
    Is there a default directory used when emailing report for file creation? Perhaps the permissions on that directory need to be changed. Please advise.

  • Input / Output Error when creating GUID Partition on External Drives

    I've been trying to setup an install of OS X on an external device and therefore need to partition them to the GUID Partition Scheme.
    I've tried it with my iPod and an External Hard Disk Drive and no matter what I do, I get the error:
    Exited with Error: Input / Output Error
    Thats all I get. I can partition them with either of the other two choices, but of course those wont let me boot an Intel Based Mac.
    The External HDD is USB 2.0, the iPod I've tried both USB and Firewire, and have not had any luck. I know it can be done, but am not sure why I'm having this problem.
    Any suggestions?

    I'm having the same problem. Trying to format an external drive with the GUID scheme fails.
    # diskutil eraseDisk HFS+ Test GPTFormat /dev/disk1
    Started erase on disk disk1
    Creating Partition Map
    error writing partition map: Invalid argument (22)
    Partitioning encountered error Invalid argument (22) on disk disk1
    I've tried this on my Intel MacBook and on my PPC Mac Mini. Tried using a generic USB2 flash disk and also an iPod shuffle. Always the same error.
    Is GUID broken on external drives?

Maybe you are looking for