Error when pasintg into DW CS3

Why do I keep getting this error when I paste text into DW
CS3.
"An error occurred while processing the input"
It doesn't matter what the source was, word document,
browser, notepad, etc. But it only does it in DESIGN view.
Any ideas?
Thanks,
Houston.

This also happened to me.
I went to "Commands" then " Manage Extensions".
I unchecked a few of the most recent installed extensions
then closed Dreamweaver. When I started Dreamweaver again, the
problem had been solved. I then rechecked the extensions that I had
unchecked to see which one was causing the problem. The problem was
still solved even with the extensions marked with a check.
I don't know what caused the problem. It appears that opening
up the Extension manager and un checking a few extensions,
restarting Dreamweaver, then re checking a few of the extensions
did the trick.
I can now copy and paste without it changing it to plain
text.

Similar Messages

I get an access denied error when logging into extension builder 2.1 on Flash Builder 4.6

I get an access denied error when logging into extension builder. The error is: You are not eligible to use CSIDE1 services due to the Service Eligibility Requirements.. Very frustrating since there is no other option than to read the adobe legal docs.
Before this started happening I was prompted to put in my birthday (WHO KNOWS WHY ADOBE NEEDS MY BIRTHDAY). I filled it in wrong and now this....
PLEASE HELP

Ok this problem is fixed.
Info for anyone else who faces this problem.
Apparently when adobe designed the extension builder installer package, they decided to get cute and try to figure out what version of the software, the extension builder package files should be installed into. So if you have FB4, FB4.6, and FB.7 there is no telling where it will go. Also if you try moving these folders somewhere else out of the applications directory, the installer will still find them on the system. I finally figured this out by watching my system log and seeing
11/22/13 12:13:46.258 AM cp[70909]: Cannot make directory /Applications/Adobe Flash Builder 4.6/Adobe Flash Builder 4.6.app
Location: /Users/myuser/Downloads/Adobe Flash Builder 4.6-adobegarbage/plugins/com.adobe.cside.ui_2.1.0.201304282312/icons: No such file or directory
After removing every single instance of places the package installer was trying to use. It finally resolved to the correct FB4.6 location. Why adobe could'nt spend a little extra time add a destination selector in the package installer is beyond me, but hey i only wasted 3 days trying to figure this out.... Sadly it isnt the first time i've wasted copius amounts of time fighting Flashbuilder problems.
Halligrimur, thank you for your help. It did lead to me solving the problem.

Captivate 3 is wrong size when importing into Flash CS3

I've tried exporting, publishing etc. and no matter how I
try, when I import into Flash CS3 the size of the Captivate content
(background screens, in particular) are too small. For example, I
captured a 423x424 area for my Captivate project. When I import
into a Flash CS3 project with the same dimensions the Captivate
content (screens) are more like 203x203.5 and the mouse path and
slide context starting positions are upper left corner. I've tried
adjusting some of the importing settings but can't get the screens
the right size unless I resize each one manually - and I have
around 100. Any help greatly appreciated!
-Scott

I am using captivate 3 and I get an error whenever I try to
export to flash cs3. unknown error.
why the hell doesnt Adobe say that flash is required to
export to flash BEFORE I buy the software? I am using my pc for
captivate, but am primarily mac based and was going to edit in
flash on my mac. but captivate didnt allow for me to export to
flash at all without any kind of flash installed. I installed a
demo version of flash, but the export is coming up with an error.
any ideas out there? adobe??? I'm currently using vista OS.
thanks in advance. r

Error when fetching into a variable of ROWTYPE

I came across with a vied error when creating the body of a method.
Problem:
I have a Type called Emp_typ and a corresponding table Emp_tab.
When I create the body of get method it gives the following error msg :
Compilation errors for PACKAGE BODY CHAMITH.EMP_API
Error: PLS-00386: type mismatch found at 'EMP_ROW' between FETCH cursor and INTO variables
Line: 9
Text: fetch get_emp_rec into emp_row;
Get Method body :
function get(id_ number) return emp_tab%rowtype IS
cursor get_emp_rec IS
select * from emp_tab;
emp_row emp_tab%rowtype;
begin
open get_emp_rec;
fetch get_emp_rec into emp_row;
close get_emp_rec;
return emp_row;
end;
However when I do the same without having a type upon the table emp_tab, it works fine.
Pls give me a solution for that.
Thanks,
Chamith

Hi,
Let me know the Oracle Database Version.
Regards,
Sailaja

Error when drilling into Sales order

I have a user that is getting an error when trying to open a document. The error is 'SBO FormDataEvent - Menu - Cannot activate a disabled menu'. She is accessing this through BP Master, clicking the SO arrow to get to the Sales Order Balance screen and then tries to drill into the SO using the orange arrow on the right of the SO number. What could be wrong?

Hi Pat,
Easy to test is create a new user and copy her authorisation .
User profile might have been corrupted .
BTW ,Did you aske her to log off from the system and log back in
Hope this helps
Bishal

Error when inserting into dynamically created filename-file

Howry
Am am receiving the following error when i am trying to insert into a file that have a dynamic filename (through declared variable, as date etc.).
I presume it is trying to look for the target file with the same name as the dynamic value passed through by the variable, but cannot find it- can anyone tell me how i can rather create the file as appose to insert into an already created file..?
Your help in this regard is much appreciated.
Here is the error:
ODI-1217: Session SAPO_hlr_suburbs (1577001) fails with return code 7000.
ODI-1226: Step 6_Ins_final fails after 1 attempt(s).
ODI-1240: Flow 6_Ins_final fails while performing a Integration operation. This flow loads target table #l_date.unl.
ODI-1228: Task 6_Ins_final (Integration) fails on the target FILE connection SAPO_HLR_SUBURBS.
Caused By: java.sql.SQLException: File C:\Files\Gero work\ODI In Files\SAPO_HLR_SUBURBS/2012-01-24 12:06:13.463.unl was not found
     at com.sunopsis.jdbc.driver.file.FileConnection.prepareForWriting(FileConnection.java:339)
     at com.sunopsis.jdbc.driver.file.impl.commands.CommandInsert.execute(CommandInsert.java:50)
     at com.sunopsis.jdbc.driver.file.CommandExecutor.executeCommand(CommandExecutor.java:33)
     at com.sunopsis.jdbc.driver.file.FilePreparedStatement.executeUpdate(FilePreparedStatement.java:138)
     at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java:665)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.executeUpdate(SnpSessTaskSql.java:3218)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java:1785)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java:2805)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java:68)
     at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2515)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:534)
     at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:449)
     at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1954)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:322)
     at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:224)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:246)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:237)
     at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:794)
     at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:114)
     at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
     at java.lang.Thread.run(Thread.java:619)

What operating system are you using?
The name of your file has the time within it , you cant have a filename with ':' in it on Windows.
Try using ALPHANUMERIC datatype for the variable and pull the current datetime as a char with something like :
select to_char( sysdate ,'YYYY-MM_DD HHMISS') from dual

Error when logging into account

I'm getting an error when trying to log in to my account.
I had 3 hard drives in my Mac and removed 2 of them and wiped/installed into another computer.
I still have the hard drive with OSX on it installed, but when I try to log into my account it says there is an error. I'm able to log into the Admin account, but not the one I used regularly.
I would like to recover some files I had on the desktop. Any way to do this?

While logged on as Admin, I go to OSX/Applications > Users > Brent > Desktop > Get Info > Permissions for Shared are Read/Write. All selections within the Brent folder have a red circle next to them - If I try to access them, it says the folder can't be opened because I don't have sufficient access privileges.
[IMG]http://img191.imageshack.us/img191/1039/picture3hs.png[/IMG]
[IMG]http://img215.imageshack.us/img215/7302/picture4ub.png[/IMG]
[IMG]http://img405.imageshack.us/img405/2796/picture5oh.png[/IMG]
[IMG]http://img683.imageshack.us/img683/4117/picture6zd.png[/IMG]

Have Elements 11 and I get a Run Time Error when going into editor?

I have Elements 11 and I am getting a run time error when I select editor. It worked 2 weeks ago and now I get the message. I use Windows 7 and it nothing has changed in the past two weeks that I know of. The error is Microsoft Visual C ++ runtime Library

Windows was installed in 2013, so it is whatever that dumb version was with
no 'off'...
I have Photoshop Elements 10.0
I have no idea what an optimized computer means.
When I say 'either editor' I mean I can't use the Full or Quick editor,
they both produce the same message stream.
As follows:
   Box pops up that is Microsoft Visual C ++ Runtime Library with the
message:
    Runtime Error
    Program : C:\Program files
    THis application has requested the Runtime to terminate it is an
unusual way....
   PLease contact the application support team for more information
If I click the OK button then I get an Adobe Photoshop Elements 10 box that
pops up which says
"Elements 10 has stopped working"
I have no problem downloading images into the program or renaming files or
pulling images back out I just can't edit.
Hope that helps.
Leslie
On Tue, Mar 31, 2015 at 11:27 AM, A.T. Romano <[email protected]>

Why do I get server error when logging into Icloud on my pc

Why do i get server error when i try to log into icloud control panel on my pc

document.write(''); document.cookie = 'CTINC=1; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/'; document.cookie = 'SiteStamp=XXDtZ12Ou3WtAF; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/'; document.cookie = 'Persistent_id_XXDtZ12Ou3WtAF=0BD14F766ACA:1318308966; expires=Fri, 08-Oct-2021 04:56:11 GMT; domain=.royalbank.com; path=/';

Error when logging into forum

Past few days get error when trying to login to forum. An error occurred during a connection to pingsso.lithium.com. SSL received a weak ephemeral Diffie-Hellman key in Server Key Exchange handshake message. (Error code: ssl_error_weak_server_ephemeral_dh_key)     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem.  Error in Firefox, but works OK in IE. What should be done to fix this in Firefox? In Firefox I can't even get to this page to type a question. Had to go to IE to be able to submit the question. What should be done to fix this in Firefox?

Clear your entire browser history including "cookies". I'd bet that will solve your issue.
ssjazz wrote:
Past few days get error when trying to login to forum. An error occurred during a connection to pingsso.lithium.com. SSL received a weak ephemeral Diffie-Hellman key in Server Key Exchange handshake message. (Error code: ssl_error_weak_server_ephemeral_dh_key)     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
    Please contact the website owners to inform them of this problem.  Error in Firefox, but works OK in IE. What should be done to fix this in Firefox? In Firefox I can't even get to this page to type a question. Had to go to IE to be able to submit the question. What should be done to fix this in Firefox?

TS3694 0x800b0101 error when signing into itunes

I am constantly getting the error code 0x800b0101 when trying to log on to Itunes. I have tried to download a fix code but am also getting an error when trying to run that. Has anyone had this problem and if so can you please provide me with a solution?????

Gents... and Ladies.
I was having the issue last night... I went to update some apps on my iPhone and it kept telling me my password was wrong (I knew it wasnt)... after saying "ok let me change that password" on my Apple ID it gave me the painful message "fatal internal message"
I just checked this AM (7:00 AM EST) and I am posting this message with my @me account using the account I had issues with.
Is everyone else ok now or still having issues. Was going to call Apple Support from work today.
Cheers
Daniel

PGC error when burning in Encore CS3 ... help

I've looked and can not find any one else with exactly this problem. I recently upgraded to Adobe Creative Suite 3 and can not get a DVD to burn. The project checks fine, the files transcode without difficulty but during the burning process, I very quickly get a PGC "file name" error.
I have a Sony Pentium 4, 2 GHz, with 1.21 G of RAM, and plenty (30 G) free on my hard drive. I have a 16X Memorex DVD burner which is probably 6 months old, but up until now has worked great. I've tried several different brands of DVD-R media and same problem.
I'd describe myself as an advanced amateur at video making. I taught myself on Nova's Video Explosion and burned 100's of dvd's on the Sonic's My DVD program over the past 5 years. Actually that system worked well, but I'd outgrown it. I downloaded Encore 2.0 free 30 day trial and loved it. I'd import (uncompressed) avi files that I'd created in other programs (mostly Video Explosion, but also Movie Shaker, and Windows Movie Maker), create menus in PS CS2 and my DVD's burned quickly and without errors at all. When my 30 days expired, I found they no longer offered 2.0 and I decided to spend the big bucks at got Creative Suite 3 really solely for Encore.
I've now spent 3 days trying all kinds of different things, many different files from different sources and I always get the same error message of "PGC "file name" has an error at "time" internal software error %0, line "file name:, time 00:"time", ref= BPGC.
I did read some messages on here about uncompressed avi vs. compressed avi. I did find that I was using uncompressed avi, but when I used Adobe premiere and rendered as MPEG 2 ( I believe), I got the same error. The only success (?) I had was when I rendered a file as a .MOV. It did burn without the dreaded error message, but the quality was extremely poor and jumpy.
Any ideas? I've got a project due in a couple of days and at present I've got files that I can't get to DVD...

So, finally I've found the source of the problem and a workaround!
First the source:
when Encore has to transcode a video it must corrupt the file, because it's the transcoded file that causes the problem, I tried this by importing a transcoded file into Encore 1.5 there it came with the same error.
Now the workaround, ok maybe it isn't quite a workaround but it's a way to go:
What I did was: I built my project new in Encore 1.5, because Encore 2.0 has a problem importing the videos by me, but if you would just import the videos in 1.5 and let 1.5 transcode them so that all of them would fit on a DVD you should be able to import the transcoded files in CS3 and it should work, no guarantee.
Other possibility: try opening your project in encore 2.0 and re import your videos there and let 2.0 do all of the transcoding, that might work too!
But for certain: don't let encore CS3 do all the transcoding!
I'm working with PAL files I don't know if it will be the same by NTSC, but it's worth a try!
If anybody feels like reproducing the bug, here is the way to do it:
Make a project in Encore CS3 and import Videos encoded by premiere as MPG2-DVD (I think: .m2v .wav) and set the transcoding options to automatic, encore should have to transcode the files. Then let encore make the DVD, at some point you should get that nice PGC error!

Inconsistent datatypes error when inserting into a object

I am trying to insert some test data into the table emp.I have managed to succesfully create the objects and types but when I try to insert into the emp table I get a inconsistent datatypes error however I have checked the datatypes and they all seem fine. Can anyone help me.
thanks
CREATE OR REPLACE TYPE Address_T AS object
(ADDR1                VC2_40,
ADDR2               VC2_40,
CITY_TX          VC2_40,
COUNTY_CD          VC2_40,
POST_CD          VC2_40);
CREATE OR REPLACE TYPE PERSON_T AS OBJECT (
LNAME_TX           NAME_T,
FNAME_TX           NAME_T,
BIRTH_DATE          DATE,
TELEPHONE          VC2_20,
EMAIL               VC2_40);
CREATE OR REPLACE TYPE EMP_T AS OBJECT (
EMP_ID     NUMBER (10),
PERSON     PERSON_T,
ADDRESS ADDRESS_T,
HIRE_DATE DATE)
CREATE TABLE EMP OF EMP_T
(EMP_ID NOT NULL PRIMARY KEY);
INSERT INTO EMP VALUES (1,
PERSON_T('PETCH',
'GAVIN',
'23-JAN-80',
'(01964)550700',
'[email protected]'),
ADDRESS_T('67 CANADA',
'WALKINGTON',
'BEVERLEY',
'EAST YORKSHIRE',
'HU17 7RL'),
'11-FEB-02'
ERROR at line 1:
ORA-00932: inconsistent datatypes

Gavin,
What is your VC2_40 and NAME_T type definition? Your insert used these as varchar2, which is a built-in type not a user-defined type. If you explicitly define these to be varchar2's, the insert statement works fine.
Regards,
Geoff
I am trying to insert some test data into the table emp.I have managed to succesfully create the objects and types but when I try to insert into the emp table I get a inconsistent datatypes error however I have checked the datatypes and they all seem fine. Can anyone help me.
thanks
CREATE OR REPLACE TYPE Address_T AS object
(ADDR1                VC2_40,
ADDR2               VC2_40,
CITY_TX          VC2_40,
COUNTY_CD          VC2_40,
POST_CD          VC2_40);
CREATE OR REPLACE TYPE PERSON_T AS OBJECT (
LNAME_TX           NAME_T,
FNAME_TX           NAME_T,
BIRTH_DATE          DATE,
TELEPHONE          VC2_20,
EMAIL               VC2_40);
CREATE OR REPLACE TYPE EMP_T AS OBJECT (
EMP_ID     NUMBER (10),
PERSON     PERSON_T,
ADDRESS ADDRESS_T,
HIRE_DATE DATE)
CREATE TABLE EMP OF EMP_T
(EMP_ID NOT NULL PRIMARY KEY);
INSERT INTO EMP VALUES (1,
PERSON_T('PETCH',
'GAVIN',
'23-JAN-80',
'(01964)550700',
'[email protected]'),
ADDRESS_T('67 CANADA',
'WALKINGTON',
'BEVERLEY',
'EAST YORKSHIRE',
'HU17 7RL'),
'11-FEB-02'
ERROR at line 1:
ORA-00932: inconsistent datatypes

Timeout expired error when inserting into a mirrored server

We have 3 SQL Server 2012 servers.
All 3 SQL Server has the same database, ie myDB.
In 2 of the servers (say server A and B), myDB is mirrored, and on the 3rd server myDb is NOT mirrored.
When the program calls a stored procedure to insert a record into a table in the database, on the mirrored servers (server A and B) sometimes it takes up to 7 seconds and gave an error "Timeout expired. The timeout period elapsed prior
to completion of the operation or the server is not responding. This failure occured while attempting to connect to the Principle server." This doesn't happen all the time, but happens often enough throughout the day.
The 3rd server (that is NOT mirrored) never gives this Timout expired error.
Will mirrored server cause slowness in writing, thus causes the Timeout expired error ?
Thank you.

Since we can live with some missing data, I think we should use asynchronous mirroring instead of synchronous, do you agree ?
That may be an options, provided that you are on Enterprise Edition. As I recall, Standard Edition only has synchronhous mirroring.
There are caveats with asynchronous mirroring. One is data loss in case of a failover, which you say that you can live with. There may be more caveats, though. Unfortunately, since my role is more of a developer than a DBA, I'm not too well versed in
the details. Maybe someone else can fill in?
Can a firewall issue cause mirror latency, that in turn causes the delay in writing to the principal database ?
Firewalls and other network hiccups certainly can cause a latency.
Erland Sommarskog, SQL Server MVP, [email protected]

Error when importing into 11.1 database from 10.2 database

Hi everyone !
I'm trying to import full database(10.2) into database 11g
Before running Data Pump ,I had checked compability between 10.2 and 11.1 and Oracle says that they're supported .
So I've used 10.2 expdp to export data from 10g database . Then I've used 11d impdp to import data into 11g database .
but it's not working well .
DATABASE_EXPORT/SYSTEM_PROCOBJACT/PRE_SYSTEM_ACTIONS/PROCACT_SYSTEM
ORA-39083: Object type PROCACT_SYSTEM failed to create with error:
ORA-20000: Incompatible version of Workspace Manager Installed
Failing sql is:
BEGIN
declare ver varchar2(100) ; dummy integer; compile_exception EXCEPTION; PRAGMA EXCEPTION_INIT(compile_exception, -06550); invalid_table EXCEPTION; PRAGMA EXCEPTION_INIT(invalid_table, -00942); procedure createErrorProc is begin execute immediate 'create or replace function system.wm$_check_install return boolean is begin return true ; end;' ; end ; begin
Processing object type DATABASE_EXPORT/SYSTEM_PROCOBJACT/POST_SYSTEM_ACTIONS/PROCACT_SYSTEM
ORA-39083: Object type PROCACT_SYSTEM failed to create with error:
ORA-06550: line 2, column 93:
PLS-00302: component 'OPERATOR_NONE' must be declared
AND ANOTHER ERROR
ORA-39083: Object type PROCOBJ failed to create with error:
ORA-06550: line 4, column 1:
PLS-00103: Encountered the symbol "DECLARE COMMIT; END;
" when expecting one of the following:
( - + case mod new not null <an identifier>
<a double-quoted delimited-identifier> <a bind variable>
continue avg count current exists max min prior sql stddev
sum variance execute forall merge time timestamp interval
date <a string literal with character set specification>
<a number> <a single-quoted S
ORA-39083: Object type PROCOBJ failed to create with error:
ORA-06550: line 2, column 11:
PLS-00103: Encountered the symbol "VARCHAR2" when expecting one of the following:
:= . ( @ % ;
The symbol ":=" was substituted for "VARCHAR2" to continue.
Can you please give me some advices ?
Thanks
Edited by: Tien Lai on 2009-okt-19 01:56

Pl see if MOS Doc 730373.1 (ORA-39083 ORA-20000 Incompatible Version of Workspace Manager Installed) is applicable in your case
HTH
Srini

Error when pasintg into DW CS3

Similar Messages

Maybe you are looking for