Error when performing action Pass Normal Change to Test
When we perform the action "Pass Normal Change to Test" we receive an error message. Reviewing the short dump in ST22 of our development ERP system provides additional information such as DYNPRO_SEND_IN_BACKGROUND, Screen output without connection to user, SAPLTMSU_ALT. Using this information we have identified two notes (49730 and 1497281, which is not applicable). We tried changing the user type for our RFC communication user (as per 49730), but that has not worked.
Interestingly the Transport of Copies (which occurs when this action is performed in ChaRM) has been created in development. But it has not been released and ChaRM is not aware that the Transport of Copies has been created. If we move it outside of ChaRM we will lose this history.
Has anyone experienced this issue? How did you resolve it?
Hi Mathias,
After checking each TMW RFC connection (in our TMS) and making updates as required; the main solution (as I see it) was in the TMSADM@ RFC connections. A couple had incorrect passwords and a couple had incorrect authorizations. Once I made the required changes and confirmed the RFC
were working from an authorization perspective, I was able to successfully complete the action “Pass Normal Change to Test”.
Hope this helps.
Shawn
Similar Messages
-
Pass normal change to test - CHARM
Dear All,
We are in process of implementing Charm system but we are facing a issue in it.
We are able to create the request for change and after being released, change document is getting generated.
First issue is change document directly moves to "in development" status instead of "created".
Second issue, we create transport request--> do our activity --> release the task. Then when we change the status from "in development" to "Pass change to test" it gives a error. There should be creation of transport of copies but that doesn't occur and changes are not moved to test environment.
Attached screen shot.
TIA
Regards
SushantHello Sushant,
For your first issue, please check the following SPRO Activities:
1) Define Status Profile for User Status
Path: Change Request Management > Transactions > Status Management > Define Status Profile for User Status
a) look for Status Profile SMMJHEAD (or, its Z-version in case you have created it) and double-click on it
b) the following screen shows the available transaction type statuses. Check if the flag "Init. Status" is checked for "Created" status (follow printscreen below)
In case 1) is OK, verify:
2) Define Action Profiles and Actions
Path: Change Request Management > Transactions > Actions > Change Actions and Conditions > Define Action Profiles and Actions
a) mark the correct action profile (default is SMMJ_ACTIONS)
b) double-click on "Action Definition"
c) look for Action Definition SMMJ_ON_CREATE_MJ; mark it and double-click on "Processing Types"
d) on the Action Definition screen, in the "Settings Method Call" screen section, there must be assigned the HF_SET_STATUS method.
Click on the Glasses Icon (display definition)
e) check if the "initial value" column has "E0001" (it is the "Created" status for Normal Changes)
Regards,
Daniel -
Active failed. Communication error when performing integrations.
I actived an activity but the request failed. In the request log,the last rows indicated the reason,but I can't understand and don't know how to solve it. Below show the last rows of the log:
Change request state from SUCCEEDED to FAILED
Error! The following problem(s) occurred during request processing:
Error! Communication error when performing integrations. HTTP protocol error [reason: Parsing of the response body failed [reason: Comment must start with "<!--".]]. Request FAILED.
REQUEST PROCESSING finished at 2010-09-05 03:00:16.468 GMT and took 2 m 36 s 172 msI copied SCs' info from http://host:port/sap/monitoring/ComponentInfo below:
Software Components
Vendor Name Version Location Applied
sap.com WD-APPS 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227111730
sap.com WD-FLEX 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227114200
sap.com ENGINEAPI 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227104639
sap.com LM-MODEL-CE 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110643
sap.com LM-SLD 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227111825
sap.com WD-RUNTIME 7.11 SP3 (1000.7.11.3.0.20090714195600) SAP AG 20100227112212
sap.com WD-ADOBE 7.11 SP3 (1000.7.11.3.0.20090708034600) SAP AG 20100227110000
sap.com EP-MODELING 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227113917
sap.com J2EE-FRMW 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227110242
sap.com ENGFACADE 7.11 SP3 (1000.7.11.3.0.20090707223600) SAP AG 20100227111458
sap.com ESREG-BASIC 7.11 SP3 (1000.7.11.3.1.20090819222300) SAP AG 20100227110634
sap.com CAF 7.11 SP3 (1000.7.11.3.0.20090708030100) SAP AG 20100227114351
sap.com ESF 7.11 SP3 (1000.7.11.3.0.20090716184100) SAP AG 20100227111734
sap.com CORE-TOOLS 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112432
sap.com EP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112608
sap.com APP-LIB 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227105136
sap.com MOIN_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227105811
sap.com LMNWABASICMBEAN 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227112135
sap.com ESCONF_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227110749
sap.com VCFRAMEWORK 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227111401
sap.com LMINTERNALAGENT 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110251
sap.com APP-LIB-BASIC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104638
sap.com ESI-UI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112458
sap.com WDEXTENSIONS 7.11 SP3 (1000.7.11.3.0.20090708083400) SAP AG 20100227114257
sap.com LMNWACDP 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227112218
sap.com EP-CONNECTIVITY 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112502
sap.com LMNWAUIFRMRK 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114149
sap.com SERVERCORE 7.11 SP3 (1000.7.11.3.0.20090721210400) SAP AG 20100227110257
sap.com CE-RA-EDM 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227110932
sap.com EP-BASIS-API 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112504
sap.com ESMP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227110214
sap.com ESREG-SERVICES 7.11 SP3 (1000.7.11.3.2.20091001033900) SAP AG 20100227112210
sap.com ESP_FRAMEWORK 7.11 SP3 (1000.7.11.3.2.20090914172400) SAP AG 20100227112151
sap.com VCKITBI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227113947
sap.com BI_UDI 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227114349
sap.com VCFREESTYLEKIT 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227114146
sap.com EP-RUNTIME 7.11 SP3 (1000.7.11.3.0.20090715192600) SAP AG 20100227114235
sap.com BI-BASE-S 7.11 SP3 (1000.7.11.3.0.20090708074100) SAP AG 20100227114355
sap.com JSPM 7.11 SP3 (1000.7.11.3.0.20090721210400) SAP AG 20100227110220
sap.com UDDI 7.11 SP3 (1000.7.11.3.1.20090928214200) SAP AG 20100227110233
sap.com WSRM 7.11 SP3 (1000.7.11.3.0.20090708051400) SAP AG 20100227110903
sap.com UMEADMIN 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112447
sap.com SAP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112125
sap.com VTP_BUILDT 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227104841
sap.com J2EE-APPS 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112629
sap.com MESSAGING 7.11 SP3 (1000.7.11.3.3.20090909003900) SAP AG 20100227114300
sap.com FRAMEWORK 7.11 SP3 (1000.7.11.3.0.20090721210500) SAP AG 20100227114152
sap.com LMNWATOOLS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114149
sap.com CAF-MF 7.11 SP3 (1000.7.11.3.0.20090708030100) SAP AG 20100227111731
sap.com CAF-UI 7.11 SP3 (1000.7.11.3.0.20090708093200) SAP AG 20100227112401
sap.com SAPNWDEMO 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104638
sap.com MMR_SERVER 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227114353
sap.com DI_CLIENTS 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112503
sap.com UWLJWF 7.11 SP3 (1000.7.11.3.0.20090708074100) SAP AG 20100227113931
sap.com VCBASE 7.11 SP3 (1000.7.11.3.0.20090708050100) SAP AG 20100227112627
sap.com BI-WDALV 7.11 SP3 (1000.7.11.3.0.20090715032600) SAP AG 20100227111328
sap.com BI-WDEXT 7.11 SP3 (1000.7.11.3.0.20090708083300) SAP AG 20100227114258
sap.com SOAMONBASIC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112447
sap.com EP-ADMIN 7.11 SP3 (1000.7.11.3.0.20090726162100) SAP AG 20100227114239
sap.com EP-BASIS 7.11 SP3 (1000.7.11.3.0.20090708052800) SAP AG 20100227112829
sap.com LMNWABASICAPPS 7.11 SP3 (1000.7.11.3.0.20090727232800) SAP AG 20100227114323
sap.com LMNWABASICCOMP 7.11 SP3 (1000.7.11.3.0.20090726191000) SAP AG 20100227112449
sap.com LMCFG 7.11 SP3 (1000.7.11.3.0.20090726191000) SAP AG 20100227112609
sap.com LMCTC 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114321
sap.com NWTEC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112331
sap.com SR-UI 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227112359
sap.com BASETABLES 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227112423
sap.com CFG_ZA_CE 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227105952
sap.com LM-CORE 7.11 SP3 (1000.7.11.3.0.20090707235900) SAP AG 20100227111845
sap.com DI_CBS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227111119
sap.com BRMS-BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104935
sap.com XI_CNT_SAP_BASIS 7.11 SP1 (1000.7.11.1.0.20081108235600) SAP AG 20100226194653
sap.com BRMS-FACADE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227105857
sap.com BPEM-CONTENT 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227111116
sap.com ADSSAP 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227104529
sap.com BPEM-PP 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227110939
sap.com BPEM-HIM 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227110948
sap.com DI_DTR 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227110723
sap.com BPEM-CORE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227112433
sap.com BPEM-FACADE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227111735
sap.com SAP_XIGUI 7.11 SP3 (1000.7.11.3.2.20090819222300) SAP AG 20100227111517
sap.com SAP_XIESR 7.11 SP3 (1000.7.11.3.3.20091001183900) SAP AG 20100227111819
sap.com SERVICE-COMP 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227112210
sap.com BPEM-WDUI 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227112404
sap.com GP-VC 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227112422
sap.com GP-PP 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227113936
sap.com GP-CORE 7.11 SP3 (1000.7.11.3.0.20090708091600) SAP AG 20100227112606
sap.com DI_CMS 7.11 SP3 (1000.7.11.3.0.20090708100200) SAP AG 20100227114059
sap.com BPEM-MON 7.11 SP3 (1000.7.11.3.0.20090708082900) SAP AG 20100227112502
sap.com VOICERT 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227111455
sap.com BRMS-CORE 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227114147
sap.com IDEUPDSITECE 7.11 SP3 (1000.7.11.3.0.20090708112000) SAP AG 20100227104951
sap.com BPEM-FLEXUI 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104710
sap.com BPEM-BUILDT 7.11 SP3 (1000.7.11.3.0.20090708055000) SAP AG 20100227104645
sap.com VOICEVC 7.11 SP3 (1000.7.11.3.0.20090708094400) SAP AG 20100227104733
sap.com IDEUPDSITETOOLS 7.11 SP3 (1000.7.11.3.0.20090708053700) SAP AG 20100227112428
test.sap.com HM-WDUIDMKTSCNR 7.11 SP0 (1000.7.11.0.0.1268322642085) Local Workplace 20100324083612
test.sap.com HM-WDUIDMKTCNT 7.11 SP0 (1000.7.11.0.0.1268322933427) Local Workplace 20100324083656
test.sap.com HM-WDUIDMKTCORE 7.11 SP0 (1000.7.11.0.0.1268322880287) Local Workplace 20100324083659 -
ERROR: Cannot perform action deploy on component library
Hi all,
Some Background on what i did:
First I created two DCs:
1)External library DC
2)J2EE server component library DC
and followed the procedure given as in
/people/valery.silaev/blog/2005/09/14/a-bit-of-impractical-scripting-for-web-dynpro
Then i created a third DC of type Web Module in order to hold all the classes as given in: Using External JARs in a Web Dynpro Project
But when I deploy the J2EE server library component DC, I am getting the following error:
Oct 16, 2006 8:38:39 AM /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
[001]Deployment aborted
Settings
SDM host : teak
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/krunalra/LOCALS1/Temp/temp19352pcbp.com~lib_comp.sda
Result
=> deployment aborted : file:/C:/DOCUME1/krunalra/LOCALS1/Temp/temp19352pcbp.com~lib_comp.sda
Aborted: development component 'lib_comp'/'pcbp.com'/'NWX_LIBS_C'/'20061016083638':
Caught exception during library deployment from SAP J2EE Engine's deploy service:
java.rmi.RemoteException: com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot perform action deploy on component library E:\usr\sap\NWX\DVEBMGS00\SDM\root\origin\pcbp.com\lib_comp\NWX_LIBS_C\20061016083638\temp19352pcbp.comlib_comp.sda. Reason: java.rmi.RemoteException: Error during deployLib of server component ./temp/deploy/work/deploying/temp19352pcbp.comlib_comp.sda.. Reason: com.sap.engine.core.service630.container.ContainerException: java.lang.NullPointerException; nested exception is: com.sap.engine.frame.container.deploy.ComponentDeploymentException: com.sap.engine.core.service630.container.ContainerException: java.lang.NullPointerException
at com.sap.engine.services.deploy.server.DeployServiceImpl.deployServerComponent(DeployServiceImpl.java:1576)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deployLibrary(DeployServiceImpl.java:1434)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:336)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.frame.container.deploy.ComponentDeploymentException: com.sap.engine.core.service630.container.ContainerException: java.lang.NullPointerException
at com.sap.engine.core.service630.context.container.deploy.DeployContextImpl.deployLibrary(DeployContextImpl.java:36)
at com.sap.engine.services.deploy.server.library.DeployLibTransaction.begin(DeployLibTransaction.java:68)
at com.sap.engine.services.deploy.server.library.LibraryTransaction.makeAllPhases(LibraryTransaction.java:81)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deployServerComponent(DeployServiceImpl.java:1566)
... 11 more
Exception is: ; nested exception is: com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot perform action deploy on component library E:\usr\sap\NWX\DVEBMGS00\SDM\root\origin\pcbp.com\lib_comp\NWX_LIBS_C\20061016083638\temp19352pcbp.comlib_comp.sda. Reason: java.rmi.RemoteException: Error during deployLib of server component ./temp/deploy/work/deploying/temp19352pcbp.comlib_comp.sda.. Reason: com.sap.engine.core.service630.container.ContainerException: java.lang.NullPointerException; nested exception is: com.sap.engine.frame.container.deploy.ComponentDeploymentException: com.sap.engine.core.service630.container.ContainerException: java.lang.NullPointerException
at com.sap.engine.services.deploy.server.DeployServiceImpl.deployServerComponent(DeployServiceImpl.java:1576)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deployLibrary(DeployServiceImpl.java:1434)
at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:336)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: com.sap.engine.frame.container.deploy.ComponentDeploymentException: com.sap.engine.core.service630.container.ContainerException: java.lang.NullPointerException
at com.sap.engine.core.service630.context.container.deploy.DeployContextImpl.deployLibrary(DeployContextImpl.java:36)
at com.sap.engine.services.deploy.server.library.DeployLibTransaction.begin(DeployLibTransaction.java:68)
at com.sap.engine.services.deploy.server.library.LibraryTransaction.makeAllPhases(LibraryTransaction.java:81)
at com.sap.engine.services.deploy.server.DeployServiceImpl.deployServerComponent(DeployServiceImpl.java:1566)
... 11 more
Exception is:
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineCompOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
Deployment exception : The deployment of at least one item aborted
I have being stuck up on this erorr for past few days,
If anybody can please help me out in this,then it would be highly appreciated.
Thank You,
With regards,
Krunal.Do you have permissions to write to the Database/RDMBS?
James -
Error when performing full backup?
Error when performing full backup, please help.
Starting backup at 14-AUG-08
current log archived
released channel: ch1
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 08/14/2008 17:43:18
RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
ORA-19625: error identifying file /u02/oracle/uat/uatdb/9.2.0/dbs/arch1_195.dbf
ORA-27037: unable to obtain file status
IBM AIX RISC System/6000 Error: 2: No such file or directory
Additional information: 3
FANHi,
It seems one of your physical archive file is not there...
but to explore more first paste your backup command that you are using.
Navneet -
Error when performing search: getExtendedProperties [LDAP: error code 50
Hi there,
We are currently running OAS 10.1.2. We have an application which is running Oracle Forms. To get access to these forms, the authenication is a combination of the user logging on to their windows domain, (AD SSO) and having the correct username and groups within Oracle OID and DAS.
We have a major problem at the moment in Production where every so often a user will get rejected for having insufficient access rights, and the UserID in the logs being Null. Yet if they try again it works.
Does anyone know why this might be happening for?
Here is the Forms log :
09/07/31 06:59:32 Forms session <967> runtime process id = 10,780
09/07/31 07:02:27 oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: er
ror code 50 - Insufficient Access Rights]
09/07/31 07:02:27 at oracle.ldap.util.User.getExtendedProperties(User.java:365)
09/07/31 07:02:27 at oracle.forms.servlet.FormsOIDContext.getUserCredentials(Unknown Source)
09/07/31 07:02:27 at oracle.forms.servlet.FormsServlet.getUserId(Unknown Source)
09/07/31 07:02:27 at oracle.forms.servlet.FormsServlet.doRequest(Unknown Source)
09/07/31 07:02:27 at oracle.forms.servlet.FormsServlet.doGet(Unknown Source)
09/07/31 07:02:27 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
09/07/31 07:02:27 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
09/07/31 07:02:27 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
09/07/31 07:02:27 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
09/07/31 07:02:27 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
09/07/31 07:02:27 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
09/07/31 07:02:27 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
09/07/31 07:02:27 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192
09/07/31 07:02:27 at java.lang.Thread.run(Thread.java:534)
09/07/31 07:02:27 oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: er
ror code 50 - Insufficient Access Rights]
09/07/31 07:02:27 In getUserId method: caught oracle.ldap.util.AccessDeniedException: General Error when performing search: ge
tExtendedProperties [LDAP: error code 50 - Insufficient Access Rights]
09/07/31 07:02:27 In doRequest method in ue.isNamingException
09/07/31 07:02:27 Redirecting to DAS to update the resviewer list
09/07/31 07:02:27 UserID is NULL redirecting to DAS
09/07/31 07:02:27 Forms Group DNcn=Logical Application Group, orclApplicationCommonName=formsApp_dras03.workcover.qld.gov.au_63A
36930655911DBBF37F32F8ED7FD07, cn=forms, cn=Products, cn=OracleContext
09/07/31 07:02:27 The DAS URL generated: http://prinfds.workcover.qld.gov.au:7777/oiddas/ui/oracle/ldap/das/mypage/AppCreateReso
urceInfo?resKey=prcar_sso&resType=oracleDB&resViewer=cn%3DLogical+Application+Group%2C+orclApplicationCommonName%3DformsApp_dras
03.workcover.qld.gov.au_63A36930655911DBBF37F32F8ED7FD07%2C+cn%3Dforms%2C+cn%3DProducts%2C+cn%3DOracleContext&doneURL=http%3A%2F
%2Fdras03.workcover.qld.gov.au%3A7778%2Fforms%2Ffrmservlet%3Fconfig%3Dprcar_sso%26form%3DSY0001.fmx&cancelURL=
09/07/31 07:05:26 oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: er
ror code 50 - Insufficient Access Rights]
09/07/31 07:05:26 at oracle.ldap.util.User.getExtendedProperties(User.java:365)
09/07/31 07:05:26 at oracle.forms.servlet.FormsOIDContext.getUserCredentials(Unknown Source)
09/07/31 07:05:26 at oracle.forms.servlet.FormsServlet.getUserId(Unknown Source)
09/07/31 07:05:26 at oracle.forms.servlet.FormsServlet.doRequest(Unknown Source)
09/07/31 07:05:26 at oracle.forms.servlet.FormsServlet.doGet(Unknown Source)
09/07/31 07:05:26 at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
09/07/31 07:05:26 at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
09/07/31 07:05:26 at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
09/07/31 07:05:26 at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
09/07/31 07:05:26 at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
09/07/31 07:05:26 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
09/07/31 07:05:26 at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
09/07/31 07:05:26 at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192
09/07/31 07:05:26 at java.lang.Thread.run(Thread.java:534)
09/07/31 07:05:26 oracle.ldap.util.AccessDeniedException: General Error when performing search: getExtendedProperties [LDAP: er
ror code 50 - Insufficient Access Rights]
09/07/31 07:05:26 In getUserId method: caught oracle.ldap.util.AccessDeniedException: General Error when performing search: ge
tExtendedProperties [LDAP: error code 50 - Insufficient Access Rights]
09/07/31 07:05:26 In doRequest method in ue.isNamingExceptionI fixed it in my environment.
formweb.cfg has oid_formsid and formsid_group_dn. Verify if these values are correct.
Also ensure that formsid_group_dn has no blank spaces after ',' (commas)
formsid_group_dn=cn=Logical Application Group,orclApplicationCommonName=formsApp_xyzhost_1224C3F0A73B11DBBFC783346A955D8F,cn=forms,cn=Products,cn=OracleContext -
Export error when performing export of posttable actions!
On an 8i database I encountered an error while performing export of posttable actions.
then error in sys.dbms_sql,dbmsaq_import_internal,dbms_export_extension etc.
errors are ora-06512,ora-01403,exp-00008
help please ,if I would be able to create above mentioned packages.LauraEA, I've had the error-43 before and would get it when just trying to open a .mov. When I moved the .mov file to another drive it would open fine. I had the QT .mov files on a (F:) drive and found that I had the drive named twice (F:) (F:) when changing the drive to a single (F:) it resolved the problem. So the error-43 does happen when a drive is named in a way that QT cannot recognize.
I don't know if the same situation pertains to the computer your on? But if you click on "more options" in the right upper corner of this page. And type in error-43 in Search Terms: and select all in Restrict by Date Range:
Where there may be some info in other post's that have had this error and give you some further insight, that's all I can offer and how it was resolved with the computer I was on -
Error when performing Additional Action
Hi Friend,
In my case additional action is activated (T77S0 ADMIN EVSUP 1). Also in table T529A U0000 and U0302 box has been checked. But when performing additional action getting an error u201CDo not enter a personnel action for the date of hiring/transferu201D.
I have hired an employee and same day transferring the employee, when trying to save Action infotype getting the above error u201Cu201CDo not enter a personnel action for the date of hiring/transferu201D.
Please let me know the way out.
Regards,
GRMHi GRM,
No two actions can be run on the same day if these actions are changing the employment status of the employee.
Either make the transfer the next day or make transfer action don't change the employment status (which is NOT advisable from my point of view).
Regards,
Dilek -
Error when trying to pass the proxy server
jdev version: 10.1.2.3.0
Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Prod
PL/SQL Release 10.2.0.4.0 - Production
TNS for Linux: Version 10.2.0.4.0 - Production
Hello,
i've follow a tutorial to make a client to consume e web service in forms.
i must work through a proxy server.
here is the jdev code:
public class PrimeNumbersStubnew extends WrappedDocLiteralStub
+{+
public PrimeNumbersStubnew()
+{+
m_httpConnection = new OracleSOAPHTTPConnection();
Properties props = new Properties();
props.put(OracleSOAPHTTPConnection.PROXY_HOST, "10.0.2.21");
props.put(OracleSOAPHTTPConnection.PROXY_PORT, "8070");
props.put(OracleSOAPHTTPConnection.PROXY_AUTH_TYPE, "basic");
props.put(OracleSOAPHTTPConnection.PROXY_USERNAME, "XXXXX");
props.put(OracleSOAPHTTPConnection.PROXY_PASSWORD, "XXXXX");
m_httpConnection.setProperties(props);
+}+
+private String _endpoint = "http://www50.brinkster.com/vbfacileinpt/np.asmx";+
public String getEndpoint()
+{+
+....+
And a receive an error when i execute the forms:
+Exception: java.lang.Exception: [SOAPException: faultCode=SOAP-ENV:Protocol; msg=Unsupported response content type "text/html; charset=utf-8", must be: "text/xml". Response was:+
+<HTML><HEAD>+
+<TITLE>Access Denied</TITLE>+
+</HEAD>+
+<BODY>+
+<FONT face="Helvetica">+
+<big><strong></strong></big><BR>+
+</FONT>+
+<blockquote>+
+<TABLE border=0 cellPadding=1 width="80%">+
+<TR><TD>+
+<FONT face="Helvetica">+
+<big>Access Denied (authentication_failed)</big>+
+<BR>+
+<BR>+
+</FONT>+
+</TD></TR>+
+<TR><TD>+
+<FONT face="Helvetica">+
+Your credentials could not be authenticated: "Credentials are missing.". You will not be permitted access until your credentials can be verified.+
+...+
It's like the credential were bad but i'm sure that they are correct.
How can i do to resolve that?I've tested and it change nothings.
I've try to put the property "ALLOW_USER_INTERACTION" and it work fine.
It ask for user and pass and after it work.
I don't understand why when i put that property it work.
Properties prop = new Properties();
prop.setProperty(OracleSOAPHTTPConnection.ALLOW_USER_INTERACTION,"true");
prop.setProperty(OracleSOAPHTTPConnection.PROXY_HOST, "10.0.2.21");
prop.setProperty(OracleSOAPHTTPConnection.PROXY_PORT,"8070");
m_httpConnection = new OracleSOAPHTTPConnection(prop);
A thing that i see with that prop, is that we use a Realm but even if i put the realm, the error is still there.
Here are the screens that the property show me:
<img src="http://www.imageshotel.org/thumbs/Malebodja/setcookierequest.jpg" alt="hébergé sur http://www.imageshotel.org/" />
<img src="http://www.imageshotel.org/thumbs/Malebodja/authorizationrequest.jpg" alt="hébergé sur http://www.imageshotel.org/" />
Any suggestions?
Edited by: Malebodja on Feb 24, 2010 2:39 AM
Edited by: Malebodja on Feb 24, 2010 2:40 AM -
"404 Not Found nginx" Certificate Error when performing Google search
Ever since I upgraded to Mavericks on my 2.4 GHz Intel iMac I have started getting occasional errors when trying to access Google sites (search, docs, calendar, YouTube, etc). In Safari, I get the warning that the Certificate is Invalid, and when I view the certificate I see a hierarchy of Certificates: "Class 3 Public Primary Certification Authority > Verisign Class 3 Public Primary Certification Authority - G5 > Verisign Class 3 Secure Server CA - G3 > [and here is the weird part to me] a web domain *other than* google or the site I am visiting, e.g. "www.netflix.com" (I don't have a netflix account), or www.skype.com, or others. Sometimes when I then accept the certificate I am redirected to the site listed in the cert screen, e.g. Netflix, other times I get a screen that says "404 Not Found nginx", other times a screen saying "Invalid URL: The requested URL "/", is invalid. Reference #9.4d290e6b1389574.4981108". I am then not able to access any google sites until some time has passed. This happens in all browsers; it is not specific to Safari.
Other notes:
-My computer's date and time is correct
-I deleted the SystemRoot Certificates for Verisign and the problem went away but not having that certificate created a lot of different problems.
-I reinstalled Mavericks to get the System Root certs back and the problem returned
Thanks for any advice you have.1. Have you restarted your router and your broadband device (if they're separate) since you first noticed the problem? If not, do that now and see whether there's any change.
2. From the Safari menu bar, select
Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data
and confirm. Test. -
"Error when activating update rule" after changing ODS key
Hi Gurus,
I have problem when transporting in productive system an existing ODS & the update rule linked. The message is : "Error when activating update rule".
This is when i move one field from the key to a simple field of the ODS.
Before transporting requests, i deleted data in the ODS by right-click on ODS --> Request tab --> select the request --> click on delete....
I don't understand because i did the same in Qual environment and everything is OK : transport request & ODS loading...
Please help.....Hello,
Please try to check/perform the following steps:
1- You must ensure for the update rule have mapping between infosources
and ODS/CUBEs correct, this means that also these objects need
to be of the same version in the source system of the transport as in
target system.
2- Please ensure all infoobjects in the cube are active.Please
reactivate all the objects again in source system.
3- Ensure all infoobjects are found in the communication structure.
4- Please try to collect the update rule via BW transport connection
with the grouping option "only necessary objects" and then transport
those objects again.
Could you please reactivate the infocube and its update rules again
and then create a new transport for this infocube and transport it
again.
Best regards,
Paula Csete -
Xcode service - CI Bot error when performing Unit Tests
When an Xcode Service bot attempts to perform a build with 'run unit tests' enabled, the build always fails. When looking at the log file the same error repeated many times:
xcsbuildd[1966] <Warning>: [XCSBuildOperation.m:106 7368f310 +2126ms] Preflight connection to /var/XCSControl/com.apple.XCSTestUserPreflightService failed; retrying: No such file or directory
Followed by these messages a few lines later:
xcsbuildd[1966] <Error>: [XCSBuildOperation.m:102 7368f310 +2104ms] Timed out trying to connect to CG Session; giving up after 60 seconds
xcsbuildd[1966] <Error>: [XCSOperation.m:33 7368f310 +0ms] Error Domain=XCSBuildServiceDomain Code=0 "Cancelled integration because headless test environment is required but not available after 60s" UserInfo=0x7fa952571bd0 {NSLocalizedDescription=Cancelled integration because headless test environment is required but not available after 60s}
xcsbuildd[1966] <Debug>: [XCSOperation.m:28 7368f310 +0ms] Cancelling operation: XCSBuildOperation
I've hit a brick wall with this, and can't find anything on it.
Has anyone had this problem and found a fix?Same problem here after updating the Xcode service to the latest version. Anyone found a solution ?
-
Consistant Static Noise noise changes when performing actions on laptop, need he
I have a Sound Blaster Li've 24-bit External sound card which I have my DJ equipment connected to. The problem I am coming across is static noise coming through the speakers. The sound is there when the audio board is powered on?or off. I have already did basic troubleshooting and I refered to theKnowledge Base on this site.
Power of laptop is in a different source, soundcard has the latest downloads, speaker cables are fine etc. I want to check the Bios on my computer but I don't think I am that tactful to do this. Anyways, I will cut and paste my message I started on Mediamonkey.com, I am GDTRFB66. I basically wan't to know if there is a filter or a better sound card I can purchase to knock out the interference the computer is making. I Usually only run 2 speakers, sometimes I will connect smaller speakers through my audio board and run it through source. Also the ststic noise is there when I just connect my computer directly to my laptop and it uses the onboard sound card, so I doubt it is an issue with the sound card.
I really would like some additional help here is the post I submitted on Media Monkey......Next Message
<span class="name">]<span class="nav">http://thalassa.bio.auth.gr
http://93.95.7.84/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=426,E=0000000000226533826,K=772,Sxi=2,Kb=ww_en glish_add,VARSET=ws:http://us.creative.com/,Case=obj(656)<span class="gensmall"><span class="nav">[size="2" color="#006699">Back to top[size="2" color="#006699"><img border="0" src="http://www.mediamonkey.com/forum/templates/subSilver/images/lang_english/icon_profile.gif" alt="View user's profile"><img border="0" src="http://www.mediamonkey.com/forum/templates/subSilver/images/lang_english/icon_pm.gif" alt="Send private message"><SCRIPT language=JavaScript type=text/javascript><!--
if ( navigator.userAgent.toLowerCase().indexOf('mozilla ') != - &amp;amp;&amp;amp; navigator.userAgent.indexOf('5.') == - &amp;amp;&amp;amp; navigator.userAgent.indexOf('6.') == - )
document.write(' ');
else
document.write('&amp;lt;/td&amp;gt;&amp;lt;td&amp;gt;&amp;a mp;nbsp;&amp;lt;/td&amp;gt;&amp;lt;td valign=&amp;quot;top&amp;quot; nowrap=&amp;quot;nowrap&amp;quot;&amp; gt;&amp;lt;div style=&amp;quot;position:relati've&amp;quo t;&amp;gt;&amp;lt;div style=&amp;quot;position:absolute&amp;quot ;&amp;gt;&amp;lt;/div&amp;gt;&amp;lt;div style=&amp;quot;position:absolute;left:3px;top :-px&amp;quot;&amp;gt;&amp;lt;/div&amp;gt;&amp;lt;/div&amp;gt;');
// --></SCRIPT>?<img width="" height="" src="http://www.mediamonkey.com/forum/templates/subSilver/images/spacer.gif" alt=""><span class="name">]GDTRFB66
<span class="postdetails">
[size="">Joined: 05 May 2007
Posts: 7
[size=""><img width="2" height="9[/img] src="http://www.mediamonkey.com/forum/templates/subSilver/images/icon_minipost.gif" alt="Post"><span class="postdetails">[size="">Posted: Sun May 20, 2007 2:54 am<span class="gen">?[size="">Post subject: [size=""><img border="0" src="http://www.mediamonkey.com/forum/templates/subSilver/images/lang_english/icon_quote.gif" alt="Reply with quote"><img border="0" src="http://www.mediamonkey.com/forum/templates/subSilver/images/lang_english/icon_edit.gif" alt="Edit/Delete this post"><img border="0" src="http://www.mediamonkey.com/forum/templates/subSilver/images/icon_delete.gif" alt="Delete this post">i am hesitant to screw with my bios I'm not that comfortable in performing those ste
ps.
Or should I give it a shot -
Error when performing uploading a file in a thread worker.
Could anyone give me some suggestions?
I am trying to get the ajax file upload to work in Netbeans Visual Web Pack.
I pass the Upload component in the start() method, and perform uploading in the run() method. I get the following errors:
WARNING: Cannot serialize session attribute SessionBean1 for session CDF8F6EF75EF4DBC930C977303C8C472
java.io.NotSerializableException: java.lang.Thread
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1156)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1509)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1474)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1392)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326)
at java.util.HashMap.writeObject(HashMap.java:1000)
at sun.reflect.GeneratedMethodAccessor245.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at java.io.ObjectStreamClass.invokeWriteObject(ObjectStreamClass.java:945)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1461)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1392)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150)
at java.io.ObjectOutputStream.defaultWriteFields(ObjectOutputStream.java:1509)
at java.io.ObjectOutputStream.writeSerialData(ObjectOutputStream.java:1474)
at java.io.ObjectOutputStream.writeOrdinaryObject(ObjectOutputStream.java:1392)
at java.io.ObjectOutputStream.writeObject0(ObjectOutputStream.java:1150)
at java.io.ObjectOutputStream.writeObject(ObjectOutputStream.java:326)
at org.apache.catalina.session.StandardSession.writeObject(StandardSession.java:1462)
at org.apache.catalina.session.StandardSession.writeObjectData(StandardSession.java:938)
at org.apache.catalina.session.StandardManager.doUnload(StandardManager.java:516)
at org.apache.catalina.session.StandardManager.unload(StandardManager.java:462)
at org.apache.catalina.session.StandardManager.stop(StandardManager.java:666)
at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4345)
at org.apache.catalina.core.StandardContext.reload(StandardContext.java:2984)
at org.apache.catalina.manager.ManagerServlet.reload(ManagerServlet.java:906)
at org.apache.catalina.manager.ManagerServlet.doGet(ManagerServlet.java:353)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:689)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:252)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.netbeans.modules.web.monitor.server.MonitorFilter.doFilter(MonitorFilter.java:174)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:202)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:173)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:213)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:178)
at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:524)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:126)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:105)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:107)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:148)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:869)
at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:664)
at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:527)
at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:80)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:684)
at java.lang.Thread.run(Thread.java:619)Sorry this isn't a concurrency problem and I know nothing of Ajax or Netbeans.
As the exception states, you are trying to serialize a Thread object and Thread is not a Serializable class. -
ORA-01722: invalid number error when trying to pass a list of values
Gurus
We are using a function like so
The usage for the function below is
Select fn_st_bb_nm_uc (‘1232131312, 123213312’) from dual;
SQL> /
Select fn_st_bb_nm_uc ('1232131312, 123213312') from dual
ERROR at line 1:
ORA-01722: invalid number
It’s giving an invalid number error. When we pass one value it is working fine but when we pass a string of values it gives this error. I have opened an SR around this but would greatly appreciate your help
Acc_blackbar is the table and acc_blkbr_id is of type number.
FUNCTION fn_st_bb_nm_uc (pBB_ID_LIST VARCHAR2)
RETURN VARCHAR2 IS
vspcm_typ_nm_uc VARCHAR2 (2000);
CURSOR stname
IS
SELECT distinct st.spcm_typ_nm_uc
FROM
acc_blackbar abb,
acc_specimen_type ast, acc_procedure apr,
acc_specimen_part asp,
specimen_type st, procedure pr,
proc_proc_family ppf
WHERE abb.ACC_BLKBR_ID = apr.ACC_BLKBR_ID
AND apr.ACC_SPCM_PART_ID = asp.ACC_SPCM_PART_ID
AND asp.ACC_SPCM_TYP_ID = ast.ACC_SPCM_TYP_ID
AND ast.ACC_SPCM_TYP_SPCM_TYP_ID = st.SPCM_TYP_ID
AND apr.procdr_id = pr.PROCDR_ID
AND pr.PROCDR_ID = ppf.PROCDR_ID
AND abb.acc_blkbr_id in (pBB_ID_LIST) ;
BEGIN
DBMS_OUTPUT.PUT_LINE(' BB LIST : ' || pBB_ID_LIST);
FOR st IN stname
LOOP
vspcm_typ_nm_uc := vspcm_typ_nm_uc || ',' || st.spcm_typ_nm_uc;
END LOOP;
vspcm_typ_nm_uc := SUBSTR (vspcm_typ_nm_uc, 2);
RETURN vspcm_typ_nm_uc;
END;This ask tom thread covers multiple solutions:
[http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:210612357425|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:210612357425]
Maybe you are looking for
-
I cannot open my photos in my CS6 product. I can see the photos at the bottom of my sdcreen, but when I try to open one, I see the little blue circulating circle for about three seconds, then it changes to a plus sign, and nothing else happens.
-
Pavilion dv6-1230us Black Screen after installing Windows 7...Please Help
Hi, I recently installed Windows 7 and everything was working fine until my computer went into hibernation. Before this, I installed all the drivers and software from the HP website for my computer for Windows 32 bit setup. After my computer went
-
Dear All, when i select debit and credits in my vendor account i am not able to clear even when my credits and debits are equal. Exchange rate difference account is triggered which does not have any value (0) but is displayed as line item when cleari
-
I cannot create child's apple id for family sharing
When it asked to fill the 3 digit security code of CC, was always not working and said make sure to put correctly, which i did and even tried with another CC, still the same
-
UD - Selected set code does not exist
Dear All, We have create material in 0001 plant. It is consumable material and QA is not required. But by mistake Inspection flag was activited in material master. Now material received is in QA Stock. We have created inspection plan and not inspecti