Error when posting an goods issue of movement type 501: order not contain

I tried to post an goods issue of movment type 501 to a stock transport order. But I get the error as below.
Document 4500000130 does not contain any selectable items
Message no. M7 064
Diagnosis
The document or item entered cannot be adopted.
Possible reasons for this are:
The document items have already been processed
(Suggest zero lines indicator set?).
the document items have been deleted or are blocked.
the document items have been created for a different plant.
(for reservations only) movements are not yet allowed for the reservation items.
(for reservations only) the document items are retrograde components of the order. These are posted using the order confirmations.
The document is an R/2 document.
Procedure
Make sure your entries are correct.
If the system has already processed the total quantity, you can set the Suggest zero lines indicator. The system will suggest the quantity zero for the items that have already been processed.
If you have entered a particular item, cancel the item. If you do not enter an item, the system searches all of the open items in the document.
If the document is a purchase order, production order or a reservation, you can enter search criteria in the dialog box.
You access the dialog box by choosing the menu option Enter with reference on the initial screen.
If the document is an R/2 document, you have to cancel it manually by entering the reversal movement type.
How can I proceed to post?
Thanks,
Eda

Hi
Go to T.code MB1A, enter the required movement type, Plant and storage location and then click,
The push button of  Reservation on the tool bar for refereing the reservation or
The push button of  order  on the tool bar for refereing the Production order.
Cheers
Kris

Similar Messages

  • Error when posting the goods receipt

    Hi we have recently successfuly updated 4.6 B to ECC 6.0.But when i am doing captive consumption by 949 Mvt. through process message system gives an error that
    Error when posting the goods receipt
    Message no. CB345
    Diagnosis
    With the selected process message, a goods receipt for the order was reported to the warehouse (destination ZPI1).  However, an error occurred when the goods receipt was posted.
    Please do needful.
    Regards,
    PP

    Hi Daniel,
    This is the first time i am coming across an issue like this.
    neverthless from a logical front,
    1. Remove Cost center as a valid receiver in Settlement Profile.
    2. Your OKB9 setting are pretty much good. No need to worry about it.  Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
    3. Check the Settlement rule when you have created Production Order. It should have been MAT.
    4. I hope you are creating Production Order with Material (using CO01 and not CO07)
    5. Make sure in OPL8, the default rule in controlling tab is PP1.
    Once all these are fine, i do not see any reason why you will get your probelm.
    Please check and revert back to me if the problem still persists.
    Best Regards
    Surya

  • BAPI to reverse Goods Issue for movement type 601

    Hi Everyone,
    Does anyone know of any BAPI that could be use to reverse Goods Issue for Movement type 601?
    I tried using BDC of transaction VL09 and was able to reverse the GI document successfully but the return message type was 'E' with unreadable message -
    Tabelle 'E' enth#t keinen Eintrag f# 'Ch 004 &'
    When I tried using BAPI_GOODSMVT_CANCEL, I get the error message 'E M7 130 Material document cannot be processed'.
    Best Regards,
    Junwen

    hi, Junwen!
    the following code works pretty well:
          fp_vbeln = vbeln_val.
          fp_budat = budat_val.
          fp_tcode = 'VL09'.
          fp_vbtyp = 'J'.
          CALL FUNCTION 'WS_REVERSE_GOODS_ISSUE'
            EXPORTING
              i_vbeln                         = fp_vbeln
              i_budat                         = fp_budat
            I_COUNT                         =
            I_MBLNR                         =
              i_tcode                         = fp_tcode
              i_vbtyp                         = fp_vbtyp
            TABLES
              t_mesg                          = it_mesg
           EXCEPTIONS
             error_reverse_goods_issue       = 1
             OTHERS                          = 2.
    luck.

  • BAPI to post a Goods issue with relation to Sales Order?

    Hi Everyone,
    After creating a delivery order, I need a BAPI to automatically post a goods issue for this DO.
    I tried using BAPI_GOODSMVT_CREATE but it returns the message 'Goods Movement not possible with mvmt type 601'.
    Any advice?
    Best Regards,
    Junwen

    Hi John,
    My data are as follows:
    GOODSMVT HEADER:
    PSTNG_DATE: 30.09.2004
    DOC_DATE: 30.09.2004
    REF_DOC_NO: had tried 1014000359 or empty
    GOODSMVT_CODE: 03
    GOODSMVT_ITEM:
    MATERIAL: HP0121002
    PLAN: 1010
    STGE: 10FG
    BATCH: BATCH1
    MOV: 601
    CUSTOMER: 180017
    ENTRY_QNT: 1
    ENT_UOM: PC
    ENT_UOM_ISO: PC
    DELIV_NUMB: 1014000359
    DELIV_ITEM: 000001
    From your feedback, it is possible to use the BAPI to create a goods issue for movement type 601?
    Best Regards,
    Junwen

  • Error in Goods issue with movement type 541

    Dear Users,
    I have created a Sub contracting PO. After that when i m issuing the goods to vendor with movement type 541, its giving the following error: Movement type 541 is not planned for this operation.
    Please help me out

    You can provide material to vendor either using Transaction codes :
    1.  MIGO - Transfer Posting - Other - Movement type 541
    2.  MB1B - Movement type 541  or
    3.  ME2O - Mention the vendor & execute
    S. Kumar

  • Error in posting a goods issue

    Hi everyone,
    We're encountering an issue with posting. When trying to post a goods issue from a delivery via VL02N, an error message is displayed : "The document does not contain any item.". although it does contain items.
    Do you have an idea of why thie error would appear ?
    Thanks in advance.

    Hello,
    Can you check whether
    1. you have picked the item,if not then pick the material and goto Edit>Confirm pick order>All items, or
    2. activated warehouse management. if yes then you need to create a transfer order with reference to that delivery.
    Hope it helps.
    Regards,
    Priyanka

  • Error during Goods Issue using movement type U61

    Dear All,
    There is this error with respect to goods movement type U61. It states u201C Difference in Object List header data: U61 previously /321 Newu201D
    I get this error when I am doing the Goods issue using the transaction EM10 or MB1A
    Any guidance or help is welcome
    Regards
    Balaji.J

    Hi,
    The goods issue movement type is 501, the previous movement type was also 501 only. The status of the device is in ESTO. By doing goods issue using movemenn type U61, I need to make them in to AVLB status.
    Regards
    Balaji.J

  • Issue while posting using goods issue for delivery type NL

    Hello Experts,
    I have created an outbound delivery for an intra-company transfer (within same company code) between two plants. The delivery type in NL (replinishment delivery)
    When i am trying to post the goods issue from supplying plant, I am getting following error
    "Account type K is not defined for document type WL".
    Delivery type NL should not be used to issue stock to vendor but I am not issuing it to any external vendor , issuing the stokc only to a receiving plant.
    Please help to understand why i am getting this error.
    Regards,
    Nish.

    Hi,
    If you are doing an STO Scenario, Check whether you have created the supplying plant as a vendor.
    The Vendor Account group should be plants.
    Also check whether you have given the plant in the vendor master Purchasing Data - Extras tab in the menu click on add purchasing data & check.
    If you haven't assigned this, do the same & create a fresh STO & check.
    Hope it will work.
    Thanks & Regards,

  • HU error when Reversing the goods issue in STO process

    Hello Gurus,
    I will explain the whole process we follow for STO:
    1. Create sales order ->Based on PR in sales order schedule lines, PO will be created -> outbound delivery -> Pack in HU -> PGI -> based on output type Idoc will be triggered -> this outbound IDOC will create the Inbound IDOC and Inbound delivery -> Here HU will copied from Outbound delivery (Means both in inbound delivery and outbound delivery HU is same)-> then do the Good receipt in Inbound delivery.
    Now when user doing the goods receipt he is getting error MSSA-SATRA exceeded by 1PCE  The reason is someone deleted the item from the sales order.  Hence when user trying to post the GR it is checking for the open sales order item in MSSA table.  Since it has been deleted from the sales order he cant able post GR.
    Now user does not wants to receive this item, hence we wants to reverse the process.
    So we followed the below process:
    1. Unassigned the HU in Inbound delivery and then deleted the Inbound delivery.
    2. Then used VL09 transaction to reverse the goods issue.  But system giving error saying that HU is already assigned to object.
    I cant able to reverse the Goods issue since the HU is same in Inbound delivery and outbound delivery.
    Kindly suggest the reversal process for the above case.  Many thanks for your help in advance.
    Awating for your valuable replies.
    Br,

    Insted of deleting the handling units you should have un assign the handling units from inbound delivery.You have deleted the handling units and the same handling units will not be available in outbound delivery Pack icon.
    Do one thing are you able to enter line item in sales order ?.If yes then create inbound delivery manually and create new handling units for the qty and do GR.
    Currently where is the stock is it transit ?.If yes then above option may work.
    If nothing is possible only an option to write a SAP oss note they will correct your outbound delivery and inbound delivery.

  • Post Goods Issue for movement type 351

    Hi experts,
    I need to perform a post goods issue for the movement type 351.
    which bapi we need to use? is it going to be "BAPI_GOODSMVT_CREATE" or something else.
    What are the information that we require other than movement type for performing post goods isue?
    Any pointers on this will be highly appreciated.
    Regards,
    Sajith

    Hi ,
    Thanks man.. Then where should I do that.
    Idoc is PORDCR102. Message type is PORDCR1.
    My requirement is to create a STO first in the user exit EXIT_SAPL2012_001 and then to perform a Post goods issue in the user exit EXIT_SAPL2012_003.
    Can u please explain it.
    Regards,
    Sajith

  • BAPI for Goods Issue (MIGO) movement type 351 with reference to PO

    Hi,
    Is there an BAPI for Goods issue in MIGO with reference to PO movement type 351, i tried using "BAPI_GOODSMVT_CREATE", but there is no PO field in this, is there any other BAPI's available for the same?
    Thanks in Advance,
    Santosh

    for goods mvt type , the available is that itself . for 351 mvt type Po number is not required .
    if its a must , create a Z bapi with additional field  for PO and make it as reference .

  • FI/CO  / MM Issue - Sales, Movement type 251 is not hitting the Inventory G

    Hi All,
    I have an issue which i am not able figure out. I need ur suggestion to correct it.
    Scenario -
    We ran Sales at POS and transfrred the sales via Idoc.
    It updates the Revenue G/L account.
    It creates Article document and reduces the inventory.
    But when click on the FI documents for the inventory it syas no financial document exsists. I checked the configuration for vauation key with valuation area and movment type its perfect. Infact if i see the sales transaction which we performed before 10-Aug-2008 do have the financial documents and the inventory G/L account is also updated. Anything after 10-Aug-2008 till date having issue.
    Could you please advice whta do i need to check?
    Thank you so much for your time.
    Regards,
    Guru

    Hi Guru
    How are you? Hope u r doing well..
    Plse check whether you have assigned the GL Accounts for movement types 251/252.& inbound profile combination.in  Movement type dependent control of good movement in IMG - SD-POS Interface-Inbound- Movement type dependent control of goods movement.
    Regards
    Anis

  • Goods Issue for Movement Type 281

    Hi,
    Can anyone suggest me how to use MB_CREATE_GOODS_MOVEMENT to post goods for Mvmt Type 281.
    Please give me Sample data as i'm getting errors with data.
    Thanks in Advance,
    Anjani.

    Hi Srinivas,
    Thanks for the answer. It helped in solving the problem.
    thanks,
    Anjani.

  • Two step posting of Goods Issue Document ( After Holding )

    Hi Gurus,
    Is there a way to park a Goods Issue Document (Movement type 261/281) via MIGO?
    i.e. Data entry done by one user and park. System generates a docuemnt number.
    Second person refer the document and post later.
    Regds
    NalindaR

    Hi
    It is possible. if u go through the user exit.
    Thanks & Regards
    Ram

  • Movement type 647 does not currently support serial numbers  management

    we can't do "shipment start/PGI for DOWN shipment 1178184 DN# 40309339.
    Error message " Movement type 647 does not currently support serial numbers  management" see also attachment
    Error is like that
    Stop : Save Shipment
      Stop : Shipment 0001178184 :Action for Shipment start
    Read Activities profile ZPGI
    Main issue
    Stop: Movement type 647 does not currentely support serial number management.
    Delivery 001114455 in shipment could not be posted GI
    Ssome problem with the movement type 647. 
    what I understand is, its a SD movement which place the material in transit and automatically executes
    the 101 movement. If possible please help in this matter.
    Pls help what exactly issue and resolution .
    Regards
    Vicky

    Check this thread
    [STO with delivery in 1 step (mvt. type 647) with serial numbering   |STO with delivery in 1 step (mvt. type 647) with serial numbering]
    thanks
    G. Lakshmipathi

Maybe you are looking for

  • Wma files getting error message the media being played is of an unsupported format

    I have tried many methods of moving wma files from my pc to my 8310.  Some work and others trigger the error message "the media being played is of an unsupported format"  Why some work and other don't is mysterious to me.

  • Employee Designation change problem

    Hi,        I need to change the designation of the employee based on the employee personal number. I have given the personal number in PA41 and i try to change the employee group and subgroup in change actions. But when i change the date to currect d

  • Processing SGML file in XI / PI possible?

    Hello all, we want to process an SGML file through XI / PI. The problem is that the SGML has tags in that are not closed like this: <aaa attribute="..."...> ... </aaa> <bbb attribute="..."> <ccc attribute="..."...> ... </ccc> my first idea was to rea

  • Print Cartridges

    Hi, Garen.  This is good advice, and I hope that whoever responds to my query will follow it. I am a new participant to this forum, and was not sure where best to post this question. I have a C5180 that has served me very well in the past.  It seems

  • Openbox cairo-compmgr or xcompmgr, no "real" compositing

    Hi everyone, I apologize in advance for my bad inglish. I just baught an old thinkpad x61, equiped with an intel GMA965 chip and an intel X3100 GPU. At first, I installed xfce with compiz-fusion. Everything worked perfectly, my terminals had a real t