Error when posting my iweb created site to a server other than .mac

This is the error I get when I try to open the home page.
Parse error: syntax error, unexpected T_STRING in /home/fusion/bridgestudents-www/index.html on line 1
Help!

This is the error I get when I try to open the home page.
Parse error: syntax error, unexpected T_STRING in /home/fusion/bridgestudents-www/index.html on line 1
You might need to change your server. Here is info on the fixes:
http://homepage.mac.com/thgewecke/parsingerror.html

Similar Messages

Open VI Reference Error when Using a LV Created EXE as ActiveX Server

Making a long story short, I'm trying to create an executable in Labview that I can call from another Labview program via active x. I've been using the following article as my guide:
https://decibel.ni.com/content/docs/DOC-9647
It seems simple but I keep getting error 6945 saying that the VI name is no longer suffiencient. I've checked and rechecked the VI name that feeds VI path and I know it is correct. All I'm really trying to do is grab the VI reference so I can hide the front panel. Attached is a screenshot of the code and the error. Any thoughts?
Solved!
Go to Solution.
Attachments:
Screen Shot 2012-07-03 at 4.18.05 PM.png ‏44 KB
Screen Shot 2012-07-03 at 4.18.35 PM.png ‏22 KB

Thanks, dbell
This is such an awaited improvement and I am shocked that I did not know about it until now. I want to move to LV 2009 or later so that I do not have to expose bunch of VIs outside of executables. In LV8.6 if you use inheritance of LV Classes then conflicting name was inevitable as overriden VIs always have the same name as the parent method VIs (prefix does not fix it).
And I guess we need to add some comments on this page from PO >> https://decibel.ni.com/content/docs/DOC-9647
TailOfGon
Certified LabVIEW Architect 2013

ERROR WHEN TRYING TO ACCESS A FORM FROM A SCHEMA OTHER THAN APPS.

We are having a archive schema and we want the same standard form to be used to point
to this scehma and get teh details of archive orders. what are the basic setups
that needs to be done to achieve this.
What are the basic grants and setups that we will have to provide
when we do this.
What we have tried is that the datagroup for the responisbility of the form is attached to the Custom schema.
But We are getting some errors.
Errors are given below are received when i click and try to access the form.
ORA-00942: table or view does not exist has been detected in FND_GLOBAL.Initialize
APP-FND-09126The Custom event WHEN-RESPONSIBILITY-CHANGED raised unhandled excpetion. ORA-04067: not excuted,stored procedure PUBLIC.FND_DEBUG does not exist.
Please help!!

Hi ,
Thanks for your update.Do ihave to give grants for all the standard objects also. How do i find what are the objects that i will have to give grants? I tried taking trace but it doesnt show any SQL's.
Please let me know.
Regards,
Sajna
Edited by: user10983581 on Jun 16, 2009 8:14 PM

How do I get the RSS Feed to work when loading onto server other than .mac?

Does anyone have any knowledge of this? I am uploading a site created in iWeb on to a Media Temple which of course, disables many key functions in iWeb. One thing it supposedly doesn't disable though, is the RSS Feed, provided you input the proper URL when publishing the site. However, after nearly 20 tries with as many variations on the url as I could think of, nothing seems to work. Anyone have any insight? Many thanks in advance.

It takes two things...
1. Entering the correct base URL in the Publish to Folder window, and...
2. Uploading the correct files to your server
Number 1
When you select "Publish to Folder", there should be a little text field where you are asked to enter in a URL. What you need to enter here is the base URL for your site, and in most cases this is simply your domain name: http://www.yourdomain.com That's it. Nothing more. iWeb will then take this URL base and generate a functioning RSS feed URL.
Number2
When you select "Publish to Folder", you are asked to specify a folder INTO which iWeb will save the files necessary for the functioning of your site. You will need to upload only the CONTENTS of this specified folder, which includes only TWO items: an index.html file & your sitefolder. You must upload only these two items to your server WITHOUT the enclosing folder (the one you told iWeb to publish into.
If you satisfy the above two conditions (and only if you satisfy these two conditions), then you will end up with a functioning, automatically generated RSS feed from iWeb on your own server. There are other ways of achieving this endpoint (a functioning RSS feed), but this is the ONLY way to get iWeb to do all the work for you.

Having two sites on a server other than MobileMe.

I have my website hosted with Host Excellence. I've built two separate sites through iWeb. I continue to upload the second site to the mobile me server. I want to upload it to the Host Excellence server, but before doing so I want to be careful I don't mess up the other site I already have uploaded there.
Under my publishing settings on iWeb I set it to publish to an "FTP server" and for the site name I have that set for the domain name of my first site which is "digitalyoureview.com". I have the "user name" set to what Host Excellence told me to set it to and I'm using the "password" they have given me. For the "website URL" I have that set to "www.digitalyoureview.com".
How do I set the "site name" and a "website URL" so that iWeb knows where to send my files on the Host Excellent server without replacing my other site? At this point I don't have a separate domain name for the second site.
Thanks!
Pat

The companies that sell you domain names use wholesalers. For some reason, most of these are in Australia. The ones I have dealt with are Tuscows and Melbourne IT.
When you transfer a domain name, it can take a little longer if the original retailer uses a different wholesaler from the one you are transferring to.
Once I had to transfer a domain name for someone from Yahoo to Host Excellence. Yahoo's tech support is so hopeless that I had to go straight to the wholesaler and they completed it in 24 hours.
Most people seem to go for the seemingly cheap domain registrations by companies like GoDaddy and Yahoo. They don't think to ask how much these guys are going to charge you when it comes around to renewing them.
Host Excellence charges $15 per year. Yahoo will cost $9.95 for one year and then $34.95 per year after that.

Urgent Deadline to Fix PC Mess Displaying iWeb Created Site -- Please Help!

IWeb 08 and web-design-savvy Mac users, I really need your help... and I'm on a tight deadline.
I've designed the website promoting our group's big event by using iWeb 08; I was very troubled when I discovered tonight that there are major display problems in Microsoft Internet Explorer 6 on Windows PCs. This website is essential to promoting the event and I can't afford to lose traffic because of display issues.
Here's the site.
www.spj.org/pittsburgh
Can anyone walk me through the best fixes for the following problems?
On a PC in Internet Explorer:
1) The home page display chokes up during scrolling; there's a sort of "stuttering" effect in rendering of simple images that slows down the PC and gums things up.
2) The layout of the center-justified text is trashed by Explorer's insertion of large blocks of blank spaces and a line return in an area where I change the color of the text for emphasis.
On my web pages that display the iWeb-generated navigation links:
3) The label for the final navigation link drops down to a second row, creating a ragged, poorly formatted look.
4) If you click on the navigation link for the current page, it takes you to the home page instead of keeping you on the current page.
None of these problems happen in Safari for Windows.
In Firefox for Windows, I believe that only problem 3 happens.
Explorer 7 for Windows appears to fix only problem 2.
-Will an "optimizer" program fix any or all of these problems?
-Can I open the iWeb-created html files in Netscape Composer, SeaMonkey, TextEdit, or any other application, change the html code to fix any of this, and save the repaired result?
-Is there any change in the formating within iWeb that I should try that will put things right on a PC?
Thanks for any help you can offer. I have to fix this somehow this weekend.

Cédric,
Thank you. I will definitely build my own navigation menu, as you described to solve problems 3 and 4.
I'm still struggling with the decision of how to deal with issues 1 and 2 On a PC in Internet Explorer. (See below.)
I did already update to iWeb 2.0.3 before I created the site.
1) The home page display chokes up during scrolling; there's a sort of "stuttering" effect in rendering of simple images that slows down the PC and gums things up.
2) The layout of the center-justified text is trashed by Explorer's insertion of large blocks of blank spaces and a line return in an area where I change the color of the text for emphasis.
Here are options I'm considering.
One is to take screenshots of the site's current iWeb-generated graphics, turn them into jpegs, and reinsert them into the page as jpegs. My thinking is that it would eliminate any Explorer problems with rendering png images and effects.
Another option is to rebuild the entire site in another program, trying to imitate the look of my current iWeb-created site. The problem is, I don't know if I have to skills to properly create my PayPal online registration section, which is essential. If I do try to redo the entire site, I haven't decided to use Netscape Composer (my old method), SeaMonkey (its successor), or some other application with which I have no experience. If I do recreate the entire site, I'm going to have to be careful to exactly duplicate the individual page names, so that I don't break the links for anyone who has linked to the current pages.

Error when posting the goods receipt

Hi we have recently successfuly updated 4.6 B to ECC 6.0.But when i am doing captive consumption by 949 Mvt. through process message system gives an error that
Error when posting the goods receipt
Message no. CB345
Diagnosis
With the selected process message, a goods receipt for the order was reported to the warehouse (destination ZPI1). However, an error occurred when the goods receipt was posted.
Please do needful.
Regards,
PP

Hi Daniel,
This is the first time i am coming across an issue like this.
neverthless from a logical front,
1. Remove Cost center as a valid receiver in Settlement Profile.
2. Your OKB9 setting are pretty much good. No need to worry about it. Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
3. Check the Settlement rule when you have created Production Order. It should have been MAT.
4. I hope you are creating Production Order with Material (using CO01 and not CO07)
5. Make sure in OPL8, the default rule in controlling tab is PP1.
Once all these are fine, i do not see any reason why you will get your probelm.
Please check and revert back to me if the problem still persists.
Best Regards
Surya

Error when posting a SOAP request

Hi all,
Facing error when posting the SOAP request and after entering the Server Username and password giving error that http not found and url
The URL i follow is http://<hostname>:<port>/XISOAPAdapter/MessageServlet?version=7.0&channel=:BusinessSystem:PI_SOAP_CC
can any one of you tell me in place of XISOAPAdapter what should i place?
Please help me to post the SOAP request to PI server.
Thanks in advance ,
Manohar.

Hi ,
copy the same URL (Endpoint that you had given while generating wsdl file) to the browser and chek the status. ( http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel)
See the below URL for the same i.e. SOAP adapter...http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
You should get response something like this '
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
ModuleProcessorRemote not instantiated
This is make sure that webservice endpoint is given correctly. Don't forget to give username and password for connecting to XI server. user should xiappluser .
Ranjeet Singh.

Error when posting goods issue

hi gurus,
can anyone please help me with this error when posting goods issue to a free issue sales order " line item text is mandatory for vendor invoices".
thanks in advance

Dear Ysabella
It seems the item texts is not maintained in the order which is made as mandatory.
Go to sale order VA02, select that line item and click on "GotoItemTexts". There maintain the relevant text and retry.
thanks
G. Lakshmipathi

Error when posting IDoc *** in system ERP100

Hi Experts!
Can you pls help me with a goods receipt issue?
When user tries to make a good receipt on a PO, we have the msg "Error when posting IDoc *** in system ERP100" in SRM front-end application monitor.
The same msg is getting displayed in RZ20.
On the idoc itself in tcode WE02 however, I can't see any problem and unfortunately I have no access to the same t-code in R/3. Anyway, I don't see the GR on the PO.
What can be the reason for this problem please?
What is in general the way to analyse and solve this kind of issue?
Thanks a lot !!
imre

Hi,
First find out the PO number from the idoc in tx WE02 in SRM system. Then in ERP , transaction BD87 , specify the details like message type and the system information .... and find out the PO that was errored out for GR. From this we can find the cause of the error. First try to rectify the error and then run the report to clear the contents of BBP_DOCUMENT_TAB.
Hope this helps.
Regards,
Kalyan

Error when posting to profitabilty segments

Dear All
I get the following error when posting poriftabilty segment data in the accounting doument, if i try to enter the same characteristic value even to diffrent G/L Accounts.
Data record already exists
Message no. KE581
Diagnosis
This error should not occur.
Procedure
Contact your system administrator or SAP directly (component CO-PA-ACT).
Has anyone come across this issue... ? Pls let me know how to resolve this?
Thanks
Gayani

Hi,
Please implement the latest version of the note 1321225 into your system in order to solve this problem!
Afterwards please execute the function module RKE_GENERATE_INTERFACE_ACT in transaction SE37 for the operating concern you use - as described in note 1321225 under 'Solution'!
Please enter function module RKE_GENERATE_INTERFACE_ACT in transaction SE37, press F8, enter your operating concern and press F8 again.
Afterwards the described problem with error message KE581 should be solved.
regards
Waman

"Unauthorized Host" error when you try to connect to the admin server

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

Why am I getting an error when I place two OAM files one after the other in different pages?

Why am I getting an error when I place two OAM files one after the other in different pages? They do not load or play correctly. They are both configured to play automatically with a .125 second delay and both have a white rectangle "poster" over for a hidden effect.

Thanks for the idea, Scott! I initially tried your idea, but my OAM files were still not loading correctly. I tried other combinations of OAM files, and it seems to work fine.
Back to my original OAM files: I made sure that my elements in my Edge Animate project had different names. I originally copied parts of some elements from one to another, and I think it was confusing to DPS to read it.

When i open an mp3 file from a source other than apple, does itunes create it's own file and can I then delete the original mp3?

when I open a music file from a source other than apple, does itunes create it's own file and can I then delete the original mp3?

If you use iTunes' default settings then when you add a file to iTunes it places a copy of the file in the iTunes media folder and it leaves the original in place. The exception is when you drag it to the Automatically Add To iTunes folder.
It does not convert the file. You can delete the original if you wish.

Can iWeb be hosted by another site other than .Mac?

I have already purchased a domain name and a hosting agreement with GoDaddy, however I cannot utilize their web page templates for some reason. Another mac user suggested I purchase iWeb and then have GoDaddy host. Can that be easily accomplished?

Yes, it can be easily accomplished. Here's iWeb's Help info on this topic...
Publishing to a server or hosting service other than .Mac:
Instead of publishing your site to .Mac, you can publish your site to a local folder and then upload it to the server or hosting provider of your choice. You may want to use this method if you own a domain name and want to place your site there.
To publish your site to a local destination:
Choose File > Publish to a Folder.
Choose a location to store your site, and then click Choose.
After you publish your site to a folder, you can use an FTP (file transfer protocol) client to upload the site folder and index file to the location of your choice. iWeb does not provide an FTP client, but they are easy to obtain. Some hosting services provide a web-based FTP upload service, or you can download an FTP client from the web. For more information, contact your server administrator.
If you don't publish your site to .Mac, these features are unavailable:
Password protection
Blog comments
Blog search
Hit counter
Enhanced slideshows
Also, for Subscribe buttons to work, you must specify your site's URL in the field provided after you publish to a folder.

Error when posting my iweb created site to a server other than .mac

Similar Messages

Maybe you are looking for