Error when posting to WebService on XI system using Soap

Hi,
We have a scenario where we have a 3rd party system posting to the XI webservice. The sender Soap adapter is configured for HTTPS without client authentication.
I am using soapui software to test the connection. Before changes were made to the configuration for SSL, we were able to post to XI using the http url. After the changes were made, when posting using the http url no response is received and no message is produced in XI. Also, when we change the url to https and using the port 50001 to post the SOAP message we get the following error:
The following error occurred while parsing the HTTP request: com.sap.engine.services.httpserver.exceptions.ParseException: Incorrect request line: [CONNECT eagnmnsu39e:50001 HTTP/1.1]..
Can anyone provide some insight to the issue?
We are using a user ID with the correct security profile
Thanks.

http://publib.boulder.ibm.com/infocenter/wmbhelp/v6r0m0/index.jsp?topic=/com.ibm.etools.mft.doc/ac04595_.htm
Hope this link will help you.
BR,
Alok

Similar Messages

Error when posting IDoc *** in system ERP100

Hi Experts!
Can you pls help me with a goods receipt issue?
When user tries to make a good receipt on a PO, we have the msg "Error when posting IDoc *** in system ERP100" in SRM front-end application monitor.
The same msg is getting displayed in RZ20.
On the idoc itself in tcode WE02 however, I can't see any problem and unfortunately I have no access to the same t-code in R/3. Anyway, I don't see the GR on the PO.
What can be the reason for this problem please?
What is in general the way to analyse and solve this kind of issue?
Thanks a lot !!
imre

Hi,
First find out the PO number from the idoc in tx WE02 in SRM system. Then in ERP , transaction BD87 , specify the details like message type and the system information .... and find out the PO that was errored out for GR. From this we can find the cause of the error. First try to rectify the error and then run the report to clear the contents of BBP_DOCUMENT_TAB.
Hope this helps.
Regards,
Kalyan

Error when calling a Webservice's public method in Forms10g

Hi,
I'm getting the following error when calling a webservice's public method, i'm using Forms10g 10.1.2.3
java.rmi.RemoteException; nested exception is: HTTP transport error javax.xml.soap.SOAPException
java.security.PrivilegedActionException javax.xml.soap.SOAPException
Message send failed javax.net.ssl.SSLException SSL handshake failed X509CertChI have added the Jar containing the client proxy in both Classpaths(system variable and default.env), the jar has been made with jdk 1.4
I also have tested the client proxy from jDeveloper and it's working there, but in Forms i'm getting this error.
I guess my problem might be that i'm calling a webservice that is secured since the url starts with https
what should i do to fix this ??
Regards
Carlos

I understand, so i have a doubt, why the webservice works on jDeveloper ??Not just JDeveloper even soapUI and Neatbeans have a way of working without a client certificate installed.
I do not know how they achieve it. I know that they work without a client DC.
Cheers,
PS: See this http://stackoverflow.com/questions/8887434/webservices-ssl-https, it offers a clue.
The java programs run unhindered when one-way authentication is being used. These products ship with a digital certificate that is in the path of most popular CAs.
Corollary, if the Web Server is configured for mutual authentication then you need to install and configure the client certificate in the tools.
Edited by: Prabodh on Dec 5, 2012 8:36 PM

Error when posting a SOAP request

Hi all,
Facing error when posting the SOAP request and after entering the Server Username and password giving error that http not found and url
The URL i follow is http://<hostname>:<port>/XISOAPAdapter/MessageServlet?version=7.0&channel=:BusinessSystem:PI_SOAP_CC
can any one of you tell me in place of XISOAPAdapter what should i place?
Please help me to post the SOAP request to PI server.
Thanks in advance ,
Manohar.

Hi ,
copy the same URL (Endpoint that you had given while generating wsdl file) to the browser and chek the status. ( http://host:port/XISOAPAdapter/MessageServlet?channel=party:service:channel)
See the below URL for the same i.e. SOAP adapter...http://help.sap.com/saphelp_nw04/helpdata/en/fc/5ad93f130f9215e10000000a155106/content.htm
You should get response something like this '
Message Servlet is in Status OK
Status information:
Servlet com.sap.aii.af.mp.soap.web.MessageServlet (Version $Id: //tc/aii/30_REL/src/_adapters/_soap/java/com/sap/aii/af/mp/soap/web/MessageServlet.java#15 $) bound to /MessageServlet
Classname ModuleProcessor: null
Lookupname for localModuleProcessorLookupName: localejbs/ModuleProcessorBean
Lookupname for remoteModuleProcessorLookupName: null
ModuleProcessorClass not instantiated
ModuleProcessorLocal is Instance of com.sap.aii.af.mp.processor.ModuleProcessorLocalLocalObjectImpl0_0
ModuleProcessorRemote not instantiated
This is make sure that webservice endpoint is given correctly. Don't forget to give username and password for connecting to XI server. user should xiappluser .
Ranjeet Singh.

Error when posting the goods receipt

Hi we have recently successfuly updated 4.6 B to ECC 6.0.But when i am doing captive consumption by 949 Mvt. through process message system gives an error that
Error when posting the goods receipt
Message no. CB345
Diagnosis
With the selected process message, a goods receipt for the order was reported to the warehouse (destination ZPI1). However, an error occurred when the goods receipt was posted.
Please do needful.
Regards,
PP

Hi Daniel,
This is the first time i am coming across an issue like this.
neverthless from a logical front,
1. Remove Cost center as a valid receiver in Settlement Profile.
2. Your OKB9 setting are pretty much good. No need to worry about it. Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
3. Check the Settlement rule when you have created Production Order. It should have been MAT.
4. I hope you are creating Production Order with Material (using CO01 and not CO07)
5. Make sure in OPL8, the default rule in controlling tab is PP1.
Once all these are fine, i do not see any reason why you will get your probelm.
Please check and revert back to me if the problem still persists.
Best Regards
Surya

Error when posting to profitabilty segments

Dear All
I get the following error when posting poriftabilty segment data in the accounting doument, if i try to enter the same characteristic value even to diffrent G/L Accounts.
Data record already exists
Message no. KE581
Diagnosis
This error should not occur.
Procedure
Contact your system administrator or SAP directly (component CO-PA-ACT).
Has anyone come across this issue... ? Pls let me know how to resolve this?
Thanks
Gayani

Hi,
Please implement the latest version of the note 1321225 into your system in order to solve this problem!
Afterwards please execute the function module RKE_GENERATE_INTERFACE_ACT in transaction SE37 for the operating concern you use - as described in note 1321225 under 'Solution'!
Please enter function module RKE_GENERATE_INTERFACE_ACT in transaction SE37, press F8, enter your operating concern and press F8 again.
Afterwards the described problem with error message KE581 should be solved.
regards
Waman

Error when posting goods issue

hi gurus,
can anyone please help me with this error when posting goods issue to a free issue sales order " line item text is mandatory for vendor invoices".
thanks in advance

Dear Ysabella
It seems the item texts is not maintained in the order which is made as mandatory.
Go to sale order VA02, select that line item and click on "GotoItemTexts". There maintain the relevant text and retry.
thanks
G. Lakshmipathi

Getting an error when i am execution a BI query using ABAP.

Hi Expert,
I am getting an error when i am execution a BI query using ABAP. Its Giving me this Error "The Info Provider properties for GHRGPDM12 are not the same as the system default" and in the error analysis it saying as bellow.
Property Data Integrity has been set differently to the system default.
Current setting: 0 for GHRGPDM12
System default: u2019 7 u2018
As I am very new to BI and have very limited knowledge, so I am not able to understand this problem. Can any one help me to resolving this issue. Previously it as working fine, I am getting this error last 2 days.
when i am debugging , I am getting error from
create instance of cl_rsr_request
CREATE OBJECT r_request
EXPORTING
i_genuniid = p_genuniid.
this FM. Its not able to create the object. Can any one please help me out.
Thanks in advance.
Regards
Satrajit

Hi,
I am able to solve this problem
Regards
Satrajit

I am getting an error when I connect my Ipod, I have used it on this laptop before but now it is saying "Ipod detected, but it could not be detected properly" Help please!

I am getting an error when I connect my Ipod, I have used it on this laptop before but now it is saying "Ipod detected, but it could not be detected properly" Help please

You can try going through this troubleshooting document
iPod nano: Error message saying that iPod 'could not be identified properly' - Apple Support

I am getting a 404 error when trying to access any search link using google, I can get to a website if I enter the url directly. I have cleared my history, emptied the cache and reset safari.

I keep getting a 404 error when trying to access any search link using google, I can get to a website by directly using the URL. I have cleared history, empited the cache and reset safari. Any suggestions.

Right. If you are using delegated privs and sudo, make sure that sudo is configured to pass on the PERL5LIB and ORACLE_HOME environment variables at least.

Error while calling a webservice from ABAP system

Hi All,
I have generated a proxy for the webservice that is there in a Java system.
Iam getting the following error when I make a method call of that generated proxy.
SOAP:1.026 SRT: HTTP-Code 500: ("Internal Server Error").
Does anybody has any idea why is this happening?
Thank You,
Suresh.

Hi Sridhar,
It is active and it was working fine. It suddendly started giving this error. Do you think if there is any possibility that there would be something wrong in the system where webservice is lying?
Thank You,
Suresh.

Tax error when posting vendor invoice

Dear Friends ,
I am posting this 3rd time, I am geting this error when poatin vendor invoice , I am geting this error in production system before GOLIVE ,when we are doing live data entry test . All the seting related to taxes has been testing more than 10times , But we are unable to find the problem . We had checked with all past messages and best possible solution in SDN ......but problem is not solved . Said error is as follows ....
Tax code V0 country IN does not exist in procedure TAXINN
Message no. FF713
Diagnosis
You entered a tax code which is not defined for the country of the company code to be posted to in the tax calculation procedure.
System Response
Procedure
Check and, if necessary, correct the entry.
Procedure for System Administration
If it is not an input error, check and possibly change the system settings.
To do this, choose Maintain entries (F5).
Check whether the company code is assigned to the correct country and whether the correct tax calculation procedure has been entered for the company code country.
Create a new tax code if necessary.
Caution:
Since it is possible that the tables in question are being updated at a different time on another computer, it can take a certain amount of time for the tax code to be on all local machines in client server architectures after saving the new code.
Raghu

hi
go to ftxp choose tax code v0
here in first input field give 00
then select that field and click on gl acct tab
here mention a gl or go to ob40 and mention gl for the acct key of that field
try finding
Tax code country IN does not exist in procedure TAXINN
on SDN u will get many threads
Tax code XX country IN does not exist in procedure TAXINN (MIRO Error)
conclusion is u must get acct for at least one condition in the tax code
regrads
kunal
award if helpful

Error while posting Vendor in R/3 System

Hi ,
When I am trying to post vendor data into R/3 system from flat file, I got an error in R3 System as
"IDoc: 00000000000525200 Status: IDoc with errors added"
"EDI : Partner profile not available"
Please advice
Thnx
Andy

Hi Andy,
When you disable the EDI_DC40 field, the Idoc Adapter constructs the Control record based on the info from SLD.
Please follow the below steps to make your scenario to work.
In XI
1)Define the Logical System for the Sender Business System in SLD.
2)Make sure this infomation about LS shows up in the "Adapter Specific Identifiers" of the Business System in XI Configuration. If not, Clear the SLD Cache and try it again.
In R/3
1)Define the logical system in the R/3 using Tr.code BD54.
2) Maintain the Partner Profile for this Logical system using TR.Code WE20 and define inbound parameters for the message type CREMAS.
Try sending the message again.
Hope this helps.
Rgds,
Sam Raju

Error when posting - Call up of feature PPMOD was not successful

Good Afternoon,
We recently completed an upgrade to ECC6.0 and this week we have seen two cases of receiving an error when trying to post payroll to FI using RPCIPE00.
The error we are receiving is: Call up of feature PPMOD was not successful, Message no. 3G100
The diagnosis on the error message is: Feature PPMOD has been called to set the employee grouping for account determination. This call was unsuccessful and suggests that we check the decision tree for PPMOD.
While there have been some somewhat recent changes to PPMOD, I have stepped through the feature for both individuals who had this error and can find no problem with the logic in the decision tree. I've also regenerated the feature successfully. After searching OSS I found note 1243065, which is the exact error that we are receiving. The problem is that this note was included in HR support pack 44, and we're already on HR support pack 48. We also found a post that suggested we use RPCIPE00_OLD, but gave us the same error.
My next step was to post a customer message, but thought it would be worthwile to post something here and see if anyone has any suggestions first.
Thanks in advance,
-Nick
Edited by: Nicholas Petters on Apr 15, 2010 5:32 PM

The issue may not be related to the note you indicated as this note should already be included in your system with SP 48. Please check what personnnel areas the errors ees are in, and see if they're in the decision tree of 'PPMOD' .
If this looks OK, run payroll simulation for the error ee, put break-point in form 'CALL_549B' of program '/1PAPA/FEAT310PPMOD' and see what value STRUC-WERKS (pers. area) is when it fails.

Dump error when posting through F-02.

Greetings everyone,
When posting G/L act through F-02 we are facing a dump error in QUALITY system and in DEVELOPMENT we are able to post succesfully.
From my primary analysis one standard program is calling and that program has syntax error.
When i checked that program it is saved in local object and generated automaticaly when some thing done is FICO.
Generated Program is Module pool program :GBTV6FI0
Description of that program is below
Generated by report RGUGBR01.
Generated code used by validations substitutions and rules.
!! Do not manually change or transport !!
For reference please find the dump below
    Error in the ABAP Application Program
    The current ABAP program "SAPLGBL5" had to be terminated because
    come across a statement that unfortunately cannot be executed.
    The following syntax error occurred in program "GBTV6FI0 " in in
     " in
    line 519:
    "FORM "SEND_CMPLX_DATA_015" does not exist"
    The include has been created and last changed by:
    Created by: "DDIC "
    Last changed by: "****"
    Error in the ABAP Application Program
    The current ABAP program "SAPLGBL5" had to be terminated because
    come across a statement that unfortunately cannot be executed.
Can any one please suggest me how to resolve this issue.
Thanks in Advance.

This looks like you have not transported the code to quality system. This code seems to have been generated when validation, substitution and rules have been defined and is missing in quality system (not transported ?)
Find the form send_cmplx_data_015 in development system and check the version. This is the transport that still needs to be transported to quality system.
I now see that you say it has been saved as local object. In that case assign it to a package and transport in SE80.
And now I see the answer of Klaus, follow the instructions in the note he has supplied first. It seems that note is exactly describing your problem. :-)

Error when posting to WebService on XI system using Soap

Similar Messages

Maybe you are looking for