Error when promote information space

HI all,
Environment:
BO BI - Explorer 4.1 SP3/SP4
IE 11, Firefox 31
Java 1.7 update 51/67
I would like to promote information space to LCMBIAR.
I have a link between two information spaces, when i try to add object and click on add & close, explorer send me an error : "Failed to get dependencies of the job.(PRS 00048)". So i just add it and then close but when i go to manage dependencies, there isn't any dependencies.
Now if i just add the two information spaces in the promotion management and go to manage dependencies. Only one of them have dependencies and not the other. How can i find all the dependencies of my two information spaces.
Thanks a lot,
Regards.

Hi,
Check if mentioned SAP note is relevant to you.
1779821 - Adding objects to Promotion Job throws error "Failed to get dependencies of the job.(PRS 00048)"
Amit

Similar Messages

Index Creation Error, while creating Information space

Hi,
I'm trying to create an Information Space in explorer based
off of a Universe created on a Bex Query from SAP BW.
This
Universe is created in Universe design tool based on BW 7.4, gives below error, while creating report in Web Intelligence based on Universe.
Database error: Failed to execute MDX Query.
Reason occured when starting the parser timeout during
allocate/CPC-CALL.
2) In Explorer everything seems to be working fine with the
Information Space creation up until the point where I need to index it. When I click 'Index' it takes about 5-10
seconds and then fails with the following error
Latest indexing failed
Start Date: 2015/02/11 08:51
End Date: 2015/02/11 08:53
Server, BOHDSIA.ExplorerIndexingServer, generated the
following messages:
Index Creation Failed (
The execution of the specified analysis query
failed.-Database error: A database error has occured. (IES 10901)
Database error: A database error has occured. (IES 10901))
The Bex Query executes successfully in BEx Analyzer and webi
report created with BEX as datasource

Please see reply at:
http://technet.oracle.com:89/ubb/Forum36/HTML/000661.html

HTTP 500 Internal Server Error when promoting

Hi All,
We are on HFM 9.3.1 and trying the use the process management feature.
In the HFM Server and Web config window we have specified an smtp server: mail.comp.com and restarted the services.
When we try to promote an entity, a new window pops up with a "HTTP 500 internal server error". For some reason this window cannot be maximised.
Now I am not 100% sure the smtp server we are using is correct.
Has anyone come across this? The entity is still promoted even though we get this error.
Which log should I be looking at for further info?
Thanks for your help.
Seb

Hi,
We fixed the problem by applying the following on the HFM web server:
1) open a command prompt (Start -> Run -> cmd) and type the following commands
cd \Windows\Microsoft.NET\Framework\v2.0.50727
regasm /codebase "C:\Hyperion\FinancialManagement\Web Server\Mailer.dll"
Restart server
Thanks,
Seb

Bus Error when accessing A24 space on a VME device with VXI-VISA and VME-MXI-2

I am trying to access A248 register space on a VME card, but I get a bus error using viIn8 and viOut8 with VXI-VISA on a VXI controller running Win2k across a VXI-MXI-2 <-> VME-MXI-2 link.
I found the following entry on your site, but I do not if or how it applies to my situation:
I Cannot Access A24 Space on a VME Bus with a VME-MXI and an AT-MXI-1 on a Windows NT System.
Product Group: VXI Software
Product Name: NI-VXI for AT-MXI for Windows NT
Version/Revision: 1.0
Problem: With a VME device, bus errors were received when trying to do a VXIin or VXIout to the address in A24 space. The device was successfully edited within the non-VXI device editor portion of VXIedit. Resma
n acknowledges that the device has a base address of x0000 and has requested 4 MBytes of space in A24 space, but the bus errors were still received.
Solution: Use VXIedit to insert x4700 into registers A, C, E and 10 of the the VME-MXI. This allows the entire range of VME address spaces (A16, A24 and A32) to be mapped to the MXI bus. You can then access A24 Space.
Related Links:
Fixed Version:
Report Date: 08/01/96
Last Updated: 07/19/2002
Document ID: 0O076NGJ

Hi bnemmers,
Thank you for contacting National Instruments. First, let me address the KnowledgeBase that you referenced. That KnowledgeBase applies to the VXI-MXI, not the VXI-MXI-2. A similar solution may help, but I will explain that solution last.
You said that you could not access A24 space on you instrument. Do you have problems accessing A24 space on this particular instrument or on all of your instruments? If you can not access A24 space at all, then there could be a problem with your MXI-2 controller or with its configuration.
If it is a single instrument that is causing problems, then I suspect there is a problem either with that particular instrument or with the configuration of that particular instrument. If possible, I suggest you test another working instrument in this system. I also suggest you test this instrument in another system that you know is working.
You mentioned that you are using a VME instrument. If this is the case, then I want to make sure that you have the VME instrument properly configured in Measurement and Automation Explorer. When you add a VME instrument using the "Create new VME Device" option in Measurement and Automation Explorer, you must make sure to add A24 space as a resource in order to communicate in A24 space. When you add this resource, make sure that you select an appropriate range.
As I mentioned above, it is possible that the MXI-2 interface is not configured properly. It is possible that A24 access is not configured properly and that your device is never even seeing a request to read or write a register. There is a register on the MXI-2 that controls A24 access. This register is called VWR2, Extender A24 Window, and is located at 0xE of the MXI-2's A24/A32 address space. You can read this register using viIn16. If you are using A24 space, then bit 14 should be set to 1 to enable A24 address mapping. Bits 10-8 control the size of the A24 window that is mapped, and bits 7-0 control the base of the A24 window. To make sure that A24 space is enabled and mapped, try writing 0x7800 to this register using viOut16. Assuming that you have opened a VISA session to your VXI-MXI-2 or VME-MXI-2, you would use viOut16(visa session, A24, 0xE, 0x7800). Some of this is explained in the VME-MXI-2 User Manual available at http://digital.ni.com/manuals.nsf/webAdvsearch/68409BFF568BB6118625665F005A0A41?OpenDocument&vid=niwc&node=132100_US.
I hope this helps. If you are still encountering problems, I suggest you call and talk to an Applications Engineer. Please generate a phone support request at http://www.ni.com/ask. When you do that, you will be given a Service Request Number and a phone number to call. When you call that phone number, you will be routed directly to an Applications Engineer.
Regards,
David Shatila
Applications Engineer
National Instruments

Error when displaying information about logon to windows 7

Hi everyone,
Would appreciate your kind assistance in this issue.
Currently, I've tried to set the "display information about previous logons during user logon" however user is unable to log in after gpupdate.
Error message is as follows :
Security policies on this computer are set to display information about the
last interactive logon. Windows could not retrieve this information. Please
contact your network administrator for assistance
Thank you everyone!

http://www.grouppolicy.biz/2010/07/group-policy-setting-of-the-week-35display-information-about-previous-logons-during-user-logon/
http://blogs.technet.com/b/askds/archive/2010/07/17/friday-mail-sack-saturday-edition.aspx#lastlogon
NB:
For domain user accounts in Windows Server 2003, Windows 2000 native, or Windows 2000 mixed functional level domains, if you enable this setting a warning message will appear that Windows could not retrieve the information and
the user will not be able to log on. Therefore you should not enable this policy setting if the domain is not at the Windows Server 2008 domain functional level
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Error in creation of Information spaces in Business Objects Explorer

Dear Experts,
I am trying to create an Information space on BOE. There is am error when i click on "NEW" button in manage spaces tab. Error says "Failed to retrieve the data source details.The creation of the data source object tree failed. - Permission denied". We raised a CSN ticket and the processor says this is built on Linux and not many know about it. Please help us with the solution.
The system has BIAccelerator and we are done with the Polestart indexing for the Infocube.
Thanks & Regards,
Swetha

Hi Vadim,
Following attributes are already maintained for Vendor Root in Org Plan :-
BUK
BWA
CUR
ITS_DEST
SYS
VENDOR_ACS
VENDOR_SYS
Beside this I have checked up availability of replicated vendors in VENMAP table with GUID.
First error message is coming:
"Central system not reached"
When I am defining Logical system and external business partner ID that is R/3 Supplier code than another error is coming :
"BP role BUOP001 already exists for partner XXX"
This XXX is running sr. no. of BP number range but do not appear in BP data base . And in next attempt next Sr. no. is blocked by system.
Problem is still persisting pls. suggest.
Sanjay

PS 50301 error - No Registered Index Version for Information Space

Hi there,
I'm facing an issue with the "SAP Explorer Information Space". When I try to open the Information Space, it opens fine but when its about to load, an error message appears. "It is not possible to open Information Space. Can't load the Information Space Index. (PS 50301)"
When I click "Show Details", it displays:
"No registered index version for information space"
I'm seeing this error message after updating BO 4.0 SP4 to BO 4.0 SP6.
I did try to index the information space but it fails.
So basically the question is why did this update from BO 4.0 SP4 to BO 4.0 SP6 impact the Explorer Information Space?
Environment details:
BO 4.0 SP6 on Windows 2008 Server using Oracle 10g as back-end.
Front End: using Windows 7, Mozilla Firefox, Internet explorer.
Error Message:
Explorer Indexing Error after I tried to Index this:

The way this was solved was, I created 4 new explorer services in CMC.
1- Explorer Exploration Server
2- Explorer Indexing Server
3- Explorer Master Server
4- Explorer Search Server
After creating the new ones and running them, I deleted the old ones. Then I Indexed the Information Space and everything seemed fine.
Regards,
samique

Adobe Bridge CS5, error when creating contact sheet "There is insufficient disk space..."

I am running Bridge CS5 for the first time and I receive this error when attempting to create a contact sheet. "There is insufficient disk space to complete this operation." The image files I am using are web optimized and very small. The error even occurs when attempting one small image. I have gone back to using Bridge CS4 and it works just fine. Any help?
Thanks!

I think I narrowed this down to having a network volume mounted with a share name of "Users". The strange thing is even you if unmount the volume you will still have problems. However, if you avoid mounting the volume entirely (from boot) it will be OK.
The solution, it appears, is to rename the sharepoint to something other than "Users". This worked for us. I'm not sure if it matters whether the server is Windows or Mac OS. In our case the sharepoint was an AFP volume on Mac OS.
We had other errors related to Bridge such as "unable to create folder" and the path in the message appeared to be /Users/currentUser/..... which made no sense at all. However, if Bridge was internally trying to use /Volumes/Users (the mounted sharepoint), it would not only not find "currentUser", but it would not have permissions to create that folder either.
So, another possible solution could be to grant file creation rights on the network volume "Users". Another not-so-great idea.
Hope that helps someone else!

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I get error message: not enough space to download when I try to buy a tv series on Itunes. It tells me to delete photos or videos to make space, but I have no photos and videos. Help?

I would guess that a TV series takes up a fair amount of storage capacity. It is just a standard message I think that may indicate that you are actually running low on storage space.
If you go to Settings>General>About how many GBs are specified as being available? If you are low on space maybe deleting some apps may help.

Error when executing a Query through information Broadcasting

Dear SDN,
We have configured information Broadcasting in the Web Reports---
Scheduled and then when executing the following error is coming
500 internal server error - Microsoft internet explorer
Error when processing your request
What has happened?
The URL http://xyz.com:8000/sap/bw/BEx was not called due to an error.
Note
The following error text was processed in the system BWD : Please enter a valid value for characteristic 0CALMONTH.
The error occurred on the application server asalbwd_BWD_00 and in the work process 0 .
The termination type was: ERROR_MESSAGE_STATE
The ABAP call stack was:
START-OF-SELECTION of program RSRD_BROADCAST_PROCESSOR
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system BWD in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server asalbwd_BWD_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server asalbwd_BWD_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http-c:900-u:VENKAT -l:E-s:BWD-i:asalbwd_BWD_00 -w:0-d:20080708-t:133744-v: ERROR_MESSAGE_STATE-e:Please enter a valid value for characteristic 0CALMONTH.
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
Please suggest us to resolve this error..
Help will be greatly appreciated with points..
Thanks in advance

Hi
Thanks...
I have given only Fiscal Year/Period Variable
Other than Fiscal Year/Period Variable....No Variables in that Query..
In FI Queries, I did not use 0CALMONTH Variable...
I do not know why it is giving that error..
Please suggest us to resolve this error..
Thanks in advance

Error when trying to create XUSER information for SAPServiceSID

Hi all,
I am getting the following error when trying to create the XUSER information for the SAPServiceSID user on a WINDOWS/MAXDB 7.9 install.. Does anyone know a FIX for this?
>xuser -c .\SAPServiceSID -U c -u CONTROL,P@ssw0rd -d SID -n HOSTNAME -S INTERNAL -t 0 -I 0 set
FATAL: Close xuser entry failed: could not write USER data [1307]
I am running the command as the SIDADM user.
I have tried the solutions in the following notes without success:
39642
1542818
39439
1875264
1409913
Thanks!

Hi Jayson,
Try this.
Solution
Add the "Administrators" group under:
Control Panel
-> All Control Panel Items
   -> Administrative Tools
      -> Local Security Policy
         -> Local Policies
            -> User Rights Assignment
              -> Take ownership of files or other objects
You check you command and modify.
xuser.exe -c Hostname\SAPServiceSID -U DEFAULT -u Username, Password -d SID -n Hostname -S Schema_Name -t 0 -I 0 set'
Regards,
V Srinivasan

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro.... The operation can't be completed because an unexpected error occurred (error code -50)

I keep on getting this error when i try to copy files to my 2T Time Capsule, Please help im running out of space on my MacBook Pro....
The operation can’t be completed because an unexpected error occurred (error code -50)

I would get an external drive today and copy all your stuff off the TC.. forget trying to load more onto it. There is a good chance after 3years (A 2TB should be only about 2years tops), the disk or the TC itself is on the way out. Do it immediately. If TM is also failing to backup you need to recognise symtoms of impending doom.
Unfortunately the error messages are archane and it is hard to discover their meaning.
You also cannot verify a network drive.. you can verify the TM sparsebundle though so do that.
A5. http://pondini.org/TM/Troubleshooting.html
Reboot the whole network from off.. certainly if you run later OS it can simply lose the drive..
If you still fail to be able to copy to the TC.. then get that external and copy off it. Tell us if you can do that.

Explorer error "Failed to retrieve the Information Spaces list." from HANA

I am getting this dumb error "Failed to retrieve the Information Spaces list. // Request timed out" in Explorer's "Manage Spaces" area every time I click on the analytic view listed under my HANA sources of the Explorer. So, my HANA source is visible, and analytic views are visible in Explorer as well, but I cannot get any Information Space created because of the error, and I could not find the error and its causes in Explorer docs.
I already
- upgraded HANA db to Rev 18 (for some reasons I cannot u[grade this system to SPS3 yet) and BIP and Explorer 4.0 are on the latest Patch 8 of SP2.
- configured connection using IDT defined connection,
- restarted servers in CMS already 100s of times.
There is enough free space on the BO server's drive: 33GB. BO is a single server based on Win2008 R2 SP1 with 40GB RAM.
Any ideas what else I can do to get rid of this issue? It is a test server, so I cannot open customer msg to SAP Support.
Thanks,
-Vitaliy

Try increasing the timeout under
..\SAP BusinessObjects\Tomcat6\webapps\explorer\WEB-INF\classes\ default.settings.properties
from
request.timeout=60
to
request.timeout=600

Information space creation error in BOBJ Explorer

while creating the information space i am getting the following error
Failed to retrieve the data source details.
The creation of the data source object tree failed.
Cannot perform this operation: no valid license found
Looks like a license key issue, but while installing the BOBJ Explorer setup does not asked for any license key,
How to solve this error? How to get the license key and how can i update the license key information?
Thanks,
Kiran

Hi all,
The problem has been solved, I added all the license keys to the CMC server and then the problem got solved.
Thanks,
Kiran

Error when launching promoted app from RemoteAPP

Hi:
We are receiving this error when launching any application from RemoteAPP, we tried promoting Calculator, Notepad, etc. and received the same error as well.
"Personalization:
This theme can't be applied to the desktop.
Try clicking a different theme"
Help!
Thank you,
Stangride

If you launch the app directly from the session hosts using the same account that your using with remoteapp what are you getting? Try and RDP to the session host when you attempt it. I would also check rsop.msc to see if you have any GPO or scripts that
are manipulating themes.

Error when promote information space

Similar Messages

Maybe you are looking for