Error when Publishing iWeb Site (iWeb 1.1.2)

I am consistently unable to publish my website. The following is the most recent error:
An error occurred while publishing file “/Web/Sites/iWeb/Site/Worcester, MAfiles/_MG0611.jpg”.
Before this one, it was a different jpg image that caused the publish to fail. I feel like three pictures have made the publish fail. I have done nothing different, I just try to keep publishing.
These are the most recent changes that might have effected something:
1. I upgraded to Leopard.
2. I edited three pages, removed one page, and added two additional pages.
3. I did not finish publishing after these changes because I had to board a plane.
4. I uploaded pictures to my computer, and then ran out of space.
5. I had troubles, but with Apple Discussion help (thank you) I was able to install my external hard drive, utilize Time Machine, and free up space on my hard drive. (I now have 21G on my internal drive available)
6. I moved iTunes music folder to external
7. I added more photos to iphoto, and added another page.
I have tried to publish several times unsuccessfully. Twice, my network went down. The other times, I get a file error (always a different file). And these were pages I did not even touch.
My entire website is now "red", meaning it needs to be published.
HELP!!!! I am sooo distressed.

Hi,
have a look at:
"I can’t publish"
Halfway down this page:
http://iwebfaq.org/site/iWeb_Troubleshoot.html
Regards,
Cédric
+“I may receive some form of compensation, financial or otherwise, from my recommendation or link.”+

Similar Messages

Error when publish my site on .mac

hello from Paris,
with iweb 08, when I publish my site I have the error : "an error occurred at the time of the publication of the file : /web/.tempory web resources/3A70C2FF-C939-4AF3-BC7D-BDOCA9AA0C5F"
can you help me?.
Thank you
Frédéric BETHE - Paris - France

Bonjour Paris,
je continue en français ?
je n'ai jamais eu ce type d'erreur particulier, le numéro ressemble assez plus une adresse (site, carte modem ou autres, bien que très longue) qu'a un type d'erreur de l'application. La suite de mon message pourrait ne pas s'appliquer. il faudrait chercher du cote Firewall, qualité de la connexion ou autre.
De mon cote j'ai appris a mes dépend que Iweb '08 etait sensible au volume que l'on tente de publier.
Le premiere chose a faire pour débloquer les erreurs est de publier la totalité du site a nouveau.
si ça passe, lire la suite : sinon alléger le site a publier en supprimant des éléments (les lourds en premier : albums, photos etc..), et reconstruire en suivant ma philosophie...
J'ai pris mon partit de publier très souvent quand je travaille mon site, après une sauvegarde bien sur.
Iweb semble relativement travailler par incrément, c'est pas toujours trop lent. C'est rébarbatif, ça fait perdre du temps en apparence, mais bien moins que de cracher le dossier domaine pour en avoir trop fait a la fois. Et de devoir tout refaire avant de pouvoir publier au nouveau.
Apres une journée de travail publiée correctement, je copie le dossier domaine au complet sur une source extérieure et amovible (un disque dur, et un DVD 1x/mois)et je m'assure que son nombre d'éléments est le même dans les deux dossiers.
je me suis deja retrouve 2 fois avec un dossier domaine vide des éléments des templates de Iweb (même pas de mes ajouts graphiques en fait...).

Error when publishing my site, etc., etc...

1) I've tried to publish my web pages (at a low 256MB), I get an error message, but nothing says just WHAT the error is!?! WHY? What do I do now??? How do I fix something when I don't know what the problem is? (By the by, I do use a dial up - could that be it? ... OR ...
2) could this be the problem, I still have that box that comes up when I open my iWeb ... " The following errors occured while trying to open this document" with 3 "missing files" - all .jpg's. I've tried to find them using spotlight, which shows "no results found" ??? So, how do I find and get rid of those so called missing files? My web pages are complete, as I want them.
3) Then, though I've "logged in" and posted before, I continue to get a page saying "You don't have permission to post, only allowed to read" I don't get that? Do I have to go through hoops to log in to the discussion group, to be able to ask a question?
Thanks to any who can help ... Frustrated KELPV

youll find one last chance here:
http://web.mac.com/mark8heaton/iWeb/PublishErrorsHelp/Publish%20Errors%20Help.ht ml
max

How do I remove old web site when publishing new site with same URL in iweb? Hit replace when publishing new iweb site (so we could have control over changes) but new site name is attached to old via a / after our www address we want to keep.

I hit the replace when publishing the new iweb site (so we could have control over changes - last one was not an apple based site) but new site name is attached to old via a forward slash and underscore after our www address. Makes it very messy with a very long web address. Original address now followed by iweb site name followed by name of first page? Went for iweb as not that computer literate - all going so well?! Cheers for help in anticipation. Have to get off to work now but be great end to week if we could be sorted tonight. Rupes

Well yes of course, if you try and publish through iWeb there won't be an option to publish without your site folder which is exactly why I told you to download Cyberduck and use Cyberduck to upload your site to your server having published your site from iWeb to a local folder. That is what you need to do if you don't want your site name to be included in yoru url.
It would have been easier also if you had used Cyberduck initially to connect to your server and delete your old site yourself - at least that way you would have deleted the correct files rather than relying on your hosting service to do it and doing it incorrectly.
Download Cyberduck and then select the publish to a local folder option from iWeb and then use Cyberduck to upload your site to your server, but rather than uploading the whole site folder and separate index file, upload ONLY the contents of your site folder and then your url will be http://www.domain.com/page_name.html.
It really isn't rocket science!

How to publish my site iWeb on a FTP servor ?

How to publish my site iWeb on a FTP servor since Mobilme is no longer available ?

You might want to check out third party hosts like Machighway or Hostexcellence or others who offer low cost website hosting. They will give you the info you need to plug into iWeb's ftp page to upload the site. they cost less than mobileme and offer more.
Apple has some tutorials on ftp and iweb. http://www.apple.com/findouthow/web/#ftp
Hugh

404 error when publishing to FTP server.

I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site." I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?

I'm getting the 404 error when publishing my iWeb site to my FTP server. Please help.
It says I have a good connection and publishes but then I get the error when I "Click to go to the site."
A 404 errors means the file is not on the server.
Checking the connection is just testing the FTP connection.
I've read where I have to upload the file to my server but with the file index_html. Do I rename my iWeb file, domain, to index_html?
Do I rename my iWeb file, domain, to index_html?
No, you don't. The domain file is where iWeb stores its assets. It stays on your computer. It has no meaning outside it. iWeb publishes the index.html file and all the other files.
Read this : The concept of iWeb Sites
So if your pages do not load, check for their presence on the server.

Error when publishing to file

i keep getting "an unknown error" when publishing to file or publishing all to mobileme...
It still works if i just publish to mobileme.
Any ideas?
Im trying to get my site going on go daddy, and kinda really need it in a folder...

If you are still getting the error then its likely that you have a corrupt domain file.
To prove this, quit iWeb, create a new folder on your desktop and drag your domain file out of - Home Folder/Library/Application Support/iWeb - into this.
Relaunch iWeb to force it to create a new domain file, add some content and try publishing to a folder.
If this works, your original file is corrupt.

Java Error When Publishing

So I have an applicational prototype that I need to have out by the end of the day today, and all of a sudden Flash Catalyst states that the project cannot be published due to an error. It also said to check the Code view to see what's wrong. Yesterday it did say that the error was a "Java Heap Space" error, but today there is absolutely nothing in the problems listing even though it still outputs that there's an error when publishing the project.
The prototype builds and runs in the browser just fine, but it's publishing that becomes the problem. I am not a Flex developer by any means, but as a user experience designer, I understand how to edit some of the coding, so if anyone could shed some light on this, I will do my best to fix the problem with any solutions that will work.
I appreciate the help guys!
-- Rick

To the original poster, Rick:
If you're seeing a "Java Heap Space" error message, this is a (not very user-friendly) way of the program telling you it's running out of memory. Catalyst tries to detect and warn you when your project is getting too large, but it's not always perfect.
Did you see any warnings about the size of the images you've imported into your project? Very large images can certianly be one source of problems.
Here are a few tips for dealing with large images:
Resize them to be smaller using a another app like Photoshop, before you import into Catalyst. Shoot for a file size of 100-300 KB at the most, for very large "gallery"-style photos. Other images should be < 100 KB (remember, people viewing your site will have to download all this).
In Catalyst, when you're done shrinking down an image to the right size, choose Optimize Artwork > Rasterize in the heads-up display to "lock in" the smaller size.
In Catalyst, choose Optimize Artwork > Convert to Linked Image for any especially large photos. This can speed up the initial load time of your site, and it will also help avoid memory problems when publishing.
Hope that helps!
- Peter

Error When Publishing "no access to internet (internet module not loaded)"

When publishing a site in GoLive 9 I get the message""no access to internet (internet module not loaded)".
i've never had this problem before, this just started happening and cant figure out how to get it to work again. it's weird because i can connect to my ftp server from the file menu and the internet module is checked on in my preferences. i've tried creating a new site file for my webpages and reinstalling GoLive and nothing has worked.
has anybody had the same problem? thx!

ha, ok i just figured it out. i didn't have the proper ftp setting in the publish preferences. i hadn't changed the info in the "server name" from the place holder text that was automatically inserted. that's a strange error message to display for that!!!

SharePointDesigner - Error when publishing a workflow

Hi.
When i´m publishing my workflow, sharepoint designer rises the following exception:
"Error were found when compiling the workflow. The workflow files were saved but cannot be run." - "Unexpected error on server associating the workflow."
The workflow is really simple; i used some custom activities (to read details from an attached excel document) and then i have to do many checks and about 12 approvals.
I have recreated the workflow and it seems that adding the 7th approval creates this error; when publishing with 6 approvals everything is fine.
My Question: What is the error, where can i find more information regarding this issue, maybe it´s a bug in designer? Are there any known workarounds that can help? I really need so many approvals :-)
Is there a way to split the workflow in 2 or 3 parts, that can do the "job" of the big one?
I´m using Sharepoint Server 2010 with the current SPD (-> Microsoft Information Worker VM).
Thx for help

I finally found a solution how to solve this issue:
In the web.config file of the current site collection (where i was publishing my workflow) i have appended a timeoutvalue for my requests:
Old entry: <httpRuntime maxRequestLength="51200"/>
New entry: <httpRuntime
maxRequestLength="51200"
executionTimeout="300"
/>
This will give my workflow some more time to publish!
Source: http://www.manjuke.com/2011/05/fixed-sharepoint-designer-error.html

Window error when publishing Muse change, can't pubish page update

Window error when publishing Muse change, can't pubish page update. Any suggestions?
It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
<script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
"use strict";
var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
n.src = "//paypal.adtag.where.com/merchant.js";
s.parentNode.insertBefore(n, s);
}(document, "script"));
</script>

Window error when publishing Muse change, can't pubish page update. Any suggestions?
It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
<script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
"use strict";
var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
n.src = "//paypal.adtag.where.com/merchant.js";
s.parentNode.insertBefore(n, s);
}(document, "script"));
</script>

WorkFlow Error when publishing

Hello,
I am having errors publishing workflows. This was working and all of a sudden stopped. From the error message I am taking it as a permissions issue?
Here is the code it spits out:
System.InvalidOperationException: Operation failed with error System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
at Microsoft.SharePoint.SPAppPrincipalManager.GetManager(SPWeb web)
at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.EnsureAppPrincipal(SPWeb elevatedWeb)
at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.<SetupApplicationEcosystem>b__3()
at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<Run
Anyone have any thoughts? This happens with all sorts of workflows, even basic ones as shown in the above example!
Thanks,
Will

Hi,
For your issue, Re-register the workflow service using command:
Register-SPWorkflowService -SPSite 'https://myhost/mysite' -WorkflowHostUri 'https://workflowhost' -AllowOAuthHttp -Force
Reopened SharePoint Designer again and test again.
Here are similar posts, you can use as a reference:
https://social.technet.microsoft.com/Forums/en-US/61b2cfad-355d-4a43-8dd6-7d6813cd1b2f/sharepointdesigner-error-when-publishing-a-workflow?forum=sharepointcustomizationprevious
http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

URGENT - INTERNAL SERVER ERROR when connecting to site

i'm getting INTERNAL SERVER ERROR when connecting to site. everything was ok till yesterday night but since today morning, nobody has been able to log in the site.
i looked at the Apache Listener log files in IAS_HOME/Apache/Apache/logs
the error_log file contained the following :-
[Fri Jan 26 08:32:04 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:32:05 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/p
age
[Fri Jan 26 08:32:58 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:32:58 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/I
sItWorking
[Fri Jan 26 08:33:13 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 08:33:13 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/page
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
then i tried to kill all the httpd processes and restart the apache and the error log was populated with the following :-
[Fri Jan 26 09:35:48 2001] [warn] child process 16269 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16270 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16271 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16272 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16273 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16274 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16275 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16276 still did not exit, sending a SIGTERM
[Fri Jan 26 09:35:49 2001] [warn] child process 16277 still did not exit, sending a SIGTERM
,same messages continue for different
,process ids followed by
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Attempt to free unreferenced scalar.
Attempt to free unreferenced scalar.
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:35:53 2001] [error] child process 16269 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16270 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16271 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:53 2001] [error] child process 16272 still did not exit, sending a SIGKILL
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16269 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16270 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16271 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16272 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16273 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [error] could not make child process 16274 exit, attempting to continue anyway
[Fri Jan 26 09:35:54 2001] [notice] caught SIGTERM, shutting down
[Fri Jan 26 09:38:10 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:38:44 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 09:38:44 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
e
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:39:06 2001] [notice] caught SIGTERM, shutting down
[Fri Jan 26 09:39:30 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
[Fri Jan 26 09:42:17 2001] [error] [client 127.0.0.1] Invalid method in request ^A
[Fri Jan 26 09:42:17 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
e
Any ideas or suggestions anyone ....??
what could have possibly changed since yesterday to effect the site ??
any help would be greatly appreciated ...
null

A couple of questions:
1) Did you try shutting down apache with the sript?
2) When killing the httpd processes did you also kill the associated java processes?
null

Adobe Captivate 6 Error when publishing

Help! I having trouble publishing a training that my employees can view. When they open the project they are getting the first image here that is essentially blank. I have attempted to reduce the size and save to different folders etc. but nothing seems to work.

Hi there,
Could you tell me the complete version of Captivate (Help > About Adobe Captivate). 6.0.1.240
Which version of Adobe Reader or Acrobat are they using? Adobe Reader XI
Can you publish this locally on your system (not to network drive directly), check force republish option also, and are you able to view it on your end? I can pull up the file from my computer that is saved in the same drive that the agents are attempting to pull up. But, I am not sure if it is viewing for me because I have it on my system.
Re: Adobe Captivate 6 Error when publishing
created by Varun Kalra<http://forums.adobe.com/people/Varun+Kalra> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/5855412#5855412

Publishing error when publishing one section

I am publishing my material per module and receive the following error when publishing one of the modules:
Publishing Activity Log:
Task
GMT Training Guide / Creating numbering styles in document
Path
/49b77e2d-7666-443e-a2fa-edbfc9aa22b2/Parts/pr.oxmlprint.multi.xml
Comment
Processing project failed
Ref. #
-1673847682
All of the other modules publish with no problems.
Any assistance in this regard would be much appreciated.
Thanks,
Angie

Did you copy the text in there? Could be the following:
The problem is related to concept frames. Some concept frames have not regular charachters. Those characters aren't visible in the edit mode. The are only visible if you copy the text of the concept frame to word. In word use the button "display unknow characters". It seemed like they will appear if you copy and paste text in the conceptframes.
You need to copy the text of the editor to Word. Click on the button "display unknown characters" to see all characters in text (including e.g.enter and spacebar). Remove the strange characters such as small circles. Copy the text and paste it back into the editor.
Save the editor (and publish again).
Good luck.

Error when Publishing iWeb Site (iWeb 1.1.2)

Similar Messages

Maybe you are looking for