Error when publishing project

Hi,
I am getting the below error when I am trying to publish existing project back to server after making
changes The error message was The project could not be saved to the server.  Please retry
saving the project.  If the probelm persists, save the project as a MPP file and contact your system administrator. 
I get this error as an admin when other PM tries to publish don't get any error it shows it publish but its not saving any changes made to the project. As
the tasks doesn't appear in Resources timesheets as well.
Any help why?

That's weird.. If you published correctly, the timesheet should be populated or at least you should be able to insert the task. Moreover you can see the assignments in the resource assignments page..
Are you sure that the publication was correctly processed, no error message in the queue and the ULS logs?
Have the resources the "New Task Assignment" permission?
Can you try on a blank new project? 
The ultimate way will be to delete the task and assignments (or just the assignments) and recreate them.
An intermediate way is to change the assignment owner to another value, publish the project, change back the assignment owner and publish
again the project.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Similar Messages

  • Error when Publishing Project on PS2013 - Blocking correlation 78%

    Hello,
    I have a strange error on a Project Server 2013 Platform. Certain projects refuse to be published, and the task finishes as an blocking job, with an achievement level of 78%. The error is Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.SynchronizeTaskListInManagedModeMessage.
    I put the complete error message at the end of this post. The ULS doesn't provide me more détails.
    To get more infos in ULS, I switched the log mode to verbose, and I got an interesting message:
    Node   Consistency Message: Assignment Save.   Uid=35d15af1-908a-e311-b465-005056a27863
    Bad assnIndex 4 passed for   654d65c4-0a59-e311-a55a-005056a27863
    Bad assnIndex 4 passed for   654d65c4-0a59-e311-a55a-005056a27863
    Bad assnIndex 4 passed for   654d65c4-0a59-e311-a55a-005056a27863
    Node Consistency Message:   Summary Resource Assignment Save.
    I tried googling this keyword "assnIndex" : it returns no answer. The GUID after the "for" is a ResourceUID. But what means assnIndex ?
    Here are some additional info, saying when the project can be publihed, and when it returns an error:
    - if the project contains tasks with only generic resources, it can be publiehed without pb => OK
    - if the project contains tasks assigned to less than 2 named resources  it can be published => OK
    - if the project contains at least 1 task with more than 2 named resource, it fails => KO
    - if I desactivate this task with 3 named resource, the project can be published => OK
    The workaround is to split tasks, so that each is assigned to max 2 resources, but it can not be a solution.
    If somebody can help me to find a solution, it would be very great !
    I looked for some CU but, it seems that I'm up to date:
    Archi: 1 WFE, 1 AS, 1 SQL Server 2012
    OS: W2008R2SP1
    Version extracted from the dbo.Versions table: 15.0.4420.1017
    We use only standard function, no specific developement, Handler, etc.
    Than you for your help,
    Sylvain
    Detailed error message:
    <?xml version="1.0" encoding="utf-16"?>
    <errinfo>
     <general>
      <class name="Microsoft.Office.Project.Server.BusinessLayer.Queue.Message">
       <error id="23000" name="ProjectPublishFailure" uid="7de05826-878e-e311-a08b-005056a27863" projectuid="b0baeed4-c48d-e311-b465-005056a27863" messagetype="Microsoft.Office.Project.Server.BusinessLayer.QueueMsg.SynchronizeTaskListInManagedModeMessage"
    messageID="38" stage="" blocking="Block"/>
      </class>
      <class name="Queue">
       <error id="26000" name="GeneralQueueJobFailed" uid="7ee05826-878e-e311-a08b-005056a27863" JobUID="9f48511e-878e-e311-838a-005056a25f52" ComputerName="b29ed4a6-9e80-4c9f-b3c2-ad2d85d17ffa"
    GroupType="ProjectPublish" MessageType="SynchronizeTaskListInManagedModeMessage" MessageId="38" Stage="" CorrelationUID="e99d521e-878e-e311-a08b-005056a27863"/>
      </class>
     </general>
    </errinfo>

    Hi,
    Since its happening with certain projects only, chances are that it could be due to corrupted project data and confusing details in ULS may can seen as misleading.
    you can follow these steps (credit goes to our very dear Dale Howard), he also listed these steps in a blog but i cudnt find it rite now:
    1.  Ask the Project Server administrator to restore the backed up project again (even though it is corrupted).
    2.  Ask the PM to open the project in Microsoft Project 2010.
    3.  Ask the PM to add the Save for Sharing button to the Quick Access Toolbar (File > Options > Quick Access Toolbar).
    4.  Click the Save for Sharing button and save the enterprise project as an MPP file.
    5.  Close the MPP file and then reopen it.
    6.  Save the MPP file with the same name as the enterprise project.
    According to Microsoft staff, the Save for Sharing feature is the new way to repair a corrupted enterprise project.  
    http://social.technet.microsoft.com/Forums/projectserver/en-US/cda7b102-b0a0-4ec1-9a1e-b059f565a47e/msp2010-project-schedule-can-not-be-opened-in-project-client?forum=projectserver2010general
    let us know if this works for you.
    cheers.
    Khurram Jamshed - MBA, PMP, MCTS, MCITP (
    Blog, Twitter, Linkedin )
    If you found this post helpful, please “Vote as Helpful”. If it answered your question, please “Mark as Answer”.

  • Java Error When Publishing

    So I have an applicational prototype that I need to have out by the end of the day today, and all of a sudden Flash Catalyst states that the project cannot be published due to an error. It also said to check the Code view to see what's wrong. Yesterday it did say that the error was a "Java Heap Space" error, but today there is absolutely nothing in the problems listing even though it still outputs that there's an error when publishing the project.
    The prototype builds and runs in the browser just fine, but it's publishing that becomes the problem. I am not a Flex developer by any means, but as a user experience designer, I understand how to edit some of the coding, so if anyone could shed some light on this, I will do my best to fix the problem with any solutions that will work.
    I appreciate the help guys!
    -- Rick

    To the original poster, Rick:
    If you're seeing a "Java Heap Space" error message, this is a (not very user-friendly) way of the program telling you it's running out of memory.  Catalyst tries to detect and warn you when your project is getting too large, but it's not always perfect.
    Did you see any warnings about the size of the images you've imported into your project?  Very large images can certianly be one source of problems.
    Here are a few tips for dealing with large images:
    Resize them to be smaller using a another app like Photoshop, before you import into Catalyst.  Shoot for a file size of 100-300 KB at the most, for very large "gallery"-style photos.  Other images should be < 100 KB (remember, people viewing your site will have to download all this).
    In Catalyst, when you're done shrinking down an image to the right size, choose Optimize Artwork > Rasterize in the heads-up display to "lock in" the smaller size.
    In Catalyst, choose Optimize Artwork > Convert to Linked Image for any especially large photos.  This can speed up the initial load time of your site, and it will also help avoid memory problems when publishing.
    Hope that helps!
    - Peter

  • Adobe Captivate 6 Error when publishing

    Help!  I having trouble publishing a training that my employees can view.  When they open the project they are getting the first image here that is essentially blank.  I have attempted to reduce the size and save to different folders etc. but nothing seems to work. 

    Hi there,
    Could you tell me the complete version of Captivate (Help > About Adobe Captivate).  6.0.1.240
    Which version of Adobe Reader or Acrobat are they using?  Adobe Reader XI
    Can you publish this locally on your system (not to network drive directly), check force republish option also, and are you able to view it on your end?  I can pull up the file from my computer that is saved in the same drive that the agents are attempting to pull up.  But, I am not sure if it is viewing for me because I have it on my system.
    Re: Adobe Captivate 6 Error when publishing
    created by Varun Kalra<http://forums.adobe.com/people/Varun+Kalra> in Adobe Captivate - View the full discussion<http://forums.adobe.com/message/5855412#5855412

  • Publishing error when publishing one section

    I am publishing my material per module and receive the following error when publishing one of the modules:
    Publishing Activity Log:
    Task
    GMT Training Guide / Creating numbering styles in document
    Path
    /49b77e2d-7666-443e-a2fa-edbfc9aa22b2/Parts/pr.oxmlprint.multi.xml     
    Comment
    Processing project failed
    Ref. #
    -1673847682
    All of the other modules publish with no problems.
    Any assistance in this regard would be much appreciated.
    Thanks,
    Angie

    Did you copy the text in there? Could be the following:
    The problem is related to concept frames. Some concept frames have not regular charachters. Those characters aren't visible in the edit mode. The are only visible if you copy the text of the concept frame to word. In word use the button "display unknow characters". It seemed like they will appear if you copy and paste text in the conceptframes.
    You need to copy the text of the editor to Word. Click on the button "display unknown characters" to see all characters in text (including e.g.enter and spacebar). Remove the strange characters such as small circles. Copy the text and paste it back into the editor.
    Save the editor (and publish again).
    Good luck.

  • 404 error when publishing to FTP server.

    I'm getting the 404 error when publishing my iWeb site to my FTP server.  Please help.
    It says I have a good connection and publishes but then I get the error when I "Click to go to the site."  I've read where I have to upload the file to my server but with the file index_html.  Do I rename my iWeb file, domain, to index_html?

    I'm getting the 404 error when publishing my iWeb site to my FTP server.  Please help.
    It says I have a good connection and publishes but then I get the error when I "Click to go to the site."
    A 404 errors means the file is not on the server.
    Checking the connection is just testing the FTP connection.
    I've read where I have to upload the file to my server but with the file index_html.  Do I rename my iWeb file, domain, to index_html?
    Do I rename my iWeb file, domain, to index_html?
    No, you don't. The domain file is where iWeb  stores its assets. It stays on your computer. It has no meaning outside it. iWeb publishes the index.html file and all the other files.
    Read this : The concept of iWeb Sites
    So if your pages do not load, check for their presence on the server.

  • ERROR When Create Project

    Hello,
    I receive this below error when create project 
    GeneralQueueJobFailed (26000) - CreateWssSite.CreateWssSiteMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='c27f372b-2a35-e311-9420-00155d000806' JobUID='05a50b2a-2a35-e311-9420-00155d000806' ComputerName='cb123222-a0b2-4ad1-bd20-3e4809df7a4a'
    GroupType='CreateWssSite' MessageType='CreateWssSiteMessage' MessageId='1' Stage='' CorrelationUID='58b84c9c-8266-f0a7-f7a4-a41dcfc7411f'. For more details, check the ULS logs on machine
    cb123222-a0b2-4ad1-bd20-3e4809df7a4a for entries with JobUID
    05a50b2a-2a35-e311-9420-00155d000806

    Hi Khaleel,
    Do you see only this message or do you also see something like below:
    CreateWssSiteContent: Creating project site failed! Project Uid=8e180c10-5433-4424-a236-54ea989872fa, site URL=http://PROJECT.test.com/PWA/AAAtest1000, site name=AAAtest1000. Microsoft.SharePoint.SPException: The site template requires that the Feature {e8389ec7-70fd-4179-a1c4-6fcb4342d7a0}
    be installed in the farm or site collection. at Microsoft.SharePoint.Utilities.SPUtility.ThrowSPExceptionWithTraceTag(UInt32 tagId, ULSCat traceCategory, String ......
    So, if you see the above message, its a feature that is missing. How many servers do you have in the farm? Do you have a separate project application service server?
    In that case you will have to copy the feature under "14\TEMPLATE\FEATURES" features folder from WFE to application server also. This is because when creating a project workspace, PSI will refer to this feature on application
    server and since it is not present in application server, it fails creating the site.
    Happy troubleshooting.....
    Vikram Daruru - MSFT

  • Window error when publishing Muse change, can't pubish page update

    Window error when publishing Muse change, can't pubish page update. Any suggestions?
    It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
    <script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
    "use strict";
    var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
    n.src = "//paypal.adtag.where.com/merchant.js";
    s.parentNode.insertBefore(n, s);
    }(document, "script"));
    </script>

    Window error when publishing Muse change, can't pubish page update. Any suggestions?
    It happens after I updated my website payment page with a new Paypal html. That html is below with x's put in to the code. Why doesn't Muse or Windows like this code in Muse?
    <script type="text/javascript" data-pp-pubid="9xxxxx6cec" data-pp-placementtype="540x200"> (function (d, t) {
    "use strict";
    var s = d.getElementsByTagName(t)[0], n = d.createElement(t);
    n.src = "//paypal.adtag.where.com/merchant.js";
    s.parentNode.insertBefore(n, s);
    }(document, "script"));
    </script>

  • WorkFlow Error when publishing

    Hello, 
    I am having errors publishing workflows. This was working and all of a sudden stopped. From the error message I am taking it as a permissions issue? 
    Here is the code it spits out: 
    System.InvalidOperationException: Operation failed with error System.UnauthorizedAccessException: Attempted to perform an unauthorized operation.
    at Microsoft.SharePoint.SPAppPrincipalManager.GetManager(SPWeb web)
    at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.EnsureAppPrincipal(SPWeb elevatedWeb)
    at Microsoft.SharePoint.WorkflowServices.SPWebWorkflowSecurityContext.<SetupApplicationEcosystem>b__3()
    at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<Run
    Anyone have any thoughts? This happens with all sorts of workflows, even basic ones as shown in the above example!
    Thanks,
    Will 

    Hi,
    For your issue, Re-register the workflow service using command:
    Register-SPWorkflowService -SPSite 'https://myhost/mysite' -WorkflowHostUri 'https://workflowhost' -AllowOAuthHttp -Force
    Reopened SharePoint Designer again and test again.
    Here are similar posts, you can use as a reference:
    https://social.technet.microsoft.com/Forums/en-US/61b2cfad-355d-4a43-8dd6-7d6813cd1b2f/sharepointdesigner-error-when-publishing-a-workflow?forum=sharepointcustomizationprevious
    http://sp2013.pro/2013/04/solution-errors-were-found-when-compiling-the-workflow-the-workflow-files-were-saved-but-cannot-be-run-cannot-set-unknown-member/
    Best Regards,
    Lisa Chen
    Lisa Chen
    TechNet Community Support

  • Error when publishing to file

    i keep getting "an unknown error" when publishing to file or publishing all to mobileme...
    It still works if i just publish to mobileme.
    Any ideas?
    Im trying to get my site going on go daddy, and kinda really need it in a folder...

    If you are still getting the error then its likely that you have a corrupt domain file.
    To prove this, quit iWeb, create a new folder on your desktop and drag your domain file out of - Home Folder/Library/Application Support/iWeb - into this.
    Relaunch iWeb to force it to create a new domain file, add some content and try publishing to a folder.
    If this works, your original file is corrupt.

  • SharePointDesigner - Error when publishing a workflow

    Hi.
    When i´m publishing my workflow, sharepoint designer rises the following exception:
    "Error were found when compiling the workflow. The workflow files were saved but cannot be run." - "Unexpected error on server associating the workflow."
    The workflow is really simple; i used some custom activities (to read details from an attached excel document) and then i have to do many checks and about 12 approvals.
    I have recreated the workflow and it seems that adding the 7th approval creates this error; when publishing with 6 approvals everything is fine.
    My Question: What is the error, where can i find more information regarding this issue, maybe it´s a bug in designer? Are there any known workarounds that can help? I really need so many approvals :-)
    Is there a way to split the workflow in 2 or 3 parts, that can do the "job" of the big one?
    I´m using Sharepoint Server 2010 with the current SPD (-> Microsoft Information Worker VM).
    Thx for help

    I finally found a solution how to solve this issue:
    In the web.config file of the current site collection (where i was publishing my workflow) i have appended a timeoutvalue for my requests:
    Old entry: <httpRuntime maxRequestLength="51200"/>
    New entry: <httpRuntime
    maxRequestLength="51200"
    executionTimeout="300"
    />
    This will give my workflow some more time to publish!
    Source: http://www.manjuke.com/2011/05/fixed-sharepoint-designer-error.html

  • Error when publishing BPM project to MDS

    Hello everyone,
    I get this error when I try to publish a BPM project to MDS : Error while publishing BPM project to MDS: 'BPM-70800: An I/O error occurred'
    I use SOA/BPM 11g version 11.1.1.4.
    Thank in advance for your answer
    Bilel

    Hello Ajaz,
    BPM-70801 is a very generic error that can have multiple causes. Please provide the error log from servers log file. From what I understand, you are using a separate soa_server1, so watch out /your_domain/servers/soa_server1/logs/soa_server1.log
    Regards
    km

  • IMovie 11 error when publishing to Youtube

    Get the following error when attempting ro publish to Youtube.
    "Unable to prepare project for publishing. The project could not be prepared for publishing because an error occurred. (-50)"
    I have 71 Gb available from 500 GB (14%). I have also made sure all folders in the "Movie" folder have permissions set to Read/Write and verified and repaired my HDD.
    I just upgraded to iMovie 11 in hopes the problem would correct itself, but it did not.
    Any help would be appreciated.

    Make sure you are using the right password for YouTube. A few months back, they had everyone link their YouTube account to a Google account. If so, you may need to use the YouTube username, but the Google account password.
    Try going to the YouTube web page and uploading it there. The same password should work.
    Message was edited by: AppleMan1958

  • SOAP error when publishing Infopath form to Sharepoint

    Hi - this is my 1st post and I hope
    someone can help with a problem I have.
    From Sharepoint, I took the list option
    to "Customize Form". I then customized the form in infopath 2010 and tried to publish but it comes up with the error:
    "The publish operation could not be
    completed. It cannot be determined if the form template was successfully published. Try publishing the form template again, or change the list settings to use the default sharepoint form. The SOAP message cannot be passed."
    I've also tried just taking the "Customize
    form" option from sharepoint and making no changes in infopath and then publishing and still I get the same error. I've also tried removing all but one field on the form but that doesn't work either. I then created a new test list on the same site with a few
    columns and tried creating a form for that list and that published fine so there is clearly something up with the list I'm trying to design the form for.
    Any ideas please as I'm totally stuck
    for ideas for this.

    Hi
    I'm afraid the ULS log information below means nothing to me,  but I'm hoping that it will help to identify the problem.  I've pasted the last section of the log from when the error happened:
    RE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3756 AND tp_Version=9 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'98 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3757 AND
    tp_Version=9 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'89 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3759 AND tp_Version=7 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET
    sql_variant7=N'83 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3761 AND tp_Version=3 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'90 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768'
    AND tp_ID = 3762 AND tp_Version=7 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'90 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3763 AND tp_Version=4 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE
    UserDataVersioned SET sql_variant7=N'71 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3764 AND tp_Version=19 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'71 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768'
    AND tp_ID = 3765 AND tp_Version=16 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'70 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3766 AND tp_Version=9 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE
    UserDataVersioned SET sql_variant7=N'50 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3772 AND tp_Version=8 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'28 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768'
    AND tp_ID = 3780 AND tp_Version=9 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'28 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3781 AND tp_Version=11 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE
    UserDataVersioned SET sql_variant7=N'22 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3782 AND tp_Version=9 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'015 / Trn / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768'
    AND tp_ID = 3783 AND tp_Version=20 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'15 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3784 AND tp_Version=19 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE
    UserDataVersioned SET sql_variant7=N'2 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3787 AND tp_Version=9 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'2 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768'
    AND tp_ID = 3788 AND tp_Version=8 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'TBC / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3790 AND tp_Version=11 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE
    UserDataVersioned SET sql_variant7=N'TBC / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3791 AND tp_Version=10 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'0 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768'
    AND tp_ID = 3792 AND tp_Version=13 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'0 / PS / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3796 AND tp_Version=29 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE
    UserDataVersioned SET sql_variant7=N'58429 / Dev / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3799 AND tp_Version=5 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'58419 / PS / ' WHERE tp_ListId =
    'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3800 AND tp_Version=9 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'58179 / Dev / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3807 AND tp_Version=7
    AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'58178 / Dev / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3808 AND tp_Version=4 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'58512
    / Lic / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3812 AND tp_Version=5 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'58492 / Lic / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND
    tp_ID = 3816 AND tp_Version=20 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersioned SET sql_variant7=N'58483 / Lic / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3817 AND tp_Version=5 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE
    UserDataVersioned SET sql_variant7=N'58442 / Lic / ' WHERE tp_ListId = 'F5C66FBF-CF4B-4A1B-B7F5-B1D78A743768' AND tp_ID = 3821 AND tp_Version=4 AND tp_Level=1 AND tp_RowOrdinal=0;UPDATE UserDataVersione'     CommandType: Text CommandTimeout: 0
    3fcc87e8-8f0e-407b-a403-ebd5e0f9bbb7
    04/18/2011 13:25:52.97 w3wp.exe (0x0238)
    0x12C4 SharePoint Foundation
    Database btq8
    High System.Threading.ThreadAbortException: Thread was being aborted.     at SNIReadSync(SNI_Conn* , SNI_Packet** , Int32 )     at SNINativeMethodWrapper.SNIReadSync(SafeHandle pConn, IntPtr&
    packet, Int32 timeout)     at System.Data.SqlClient.TdsParserStateObject.ReadSni(DbAsyncResult asyncResult, TdsParserStateObject stateObj)     at System.Data.SqlClient.TdsParserStateObject.ReadNetworkPacket()     at System.Data.SqlClient.TdsParserStateObject.ReadBuffer()
        at System.Data.SqlClient.TdsParserStateObject.ReadByte()     at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject
    stateObj)     at System.Data.SqlClient.SqlDataReader.ConsumeMetaData()     at System.Data.SqlClient.SqlDataReader.get_MetaData()     at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior,
    String resetOptionsString)     at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior
    cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result)     at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)  
      at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)     at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior)     at Microsoft.SharePoint.Utilities.SqlSession.ExecuteReader(SqlCommand
    command, CommandBehavior behavior, SqlQueryData monitoringData, Boolean retryForDeadLock)     at Microsoft.SharePoint.SPSqlClient.ExecuteQueryInternal(Boolean retryfordeadlock)     at Microsoft.SharePoint.SPSqlClient.ExecuteQuery(Boolean
    retryfordeadlock) 3fcc87e8-8f0e-407b-a403-ebd5e0f9bbb7
    04/18/2011 13:25:52.97 w3wp.exe (0x0238)
    0x12C4 SharePoint Foundation
    General 8e2s
    Medium Unknown SPRequest error occurred. More information: 0x80131530
    3fcc87e8-8f0e-407b-a403-ebd5e0f9bbb7
    04/18/2011 13:25:52.97 w3wp.exe (0x0238)
    0x12C4 SharePoint Foundation
    Logging Correlation Data xmnv
    Medium Site=/sites/nfp
    3fcc87e8-8f0e-407b-a403-ebd5e0f9bbb7
    04/18/2011 13:25:52.98 w3wp.exe (0x0238)
    0x12C4 SharePoint Foundation
    General 72nz
    Medium Videntityinfo::isFreshToken reported failure.
    3fcc87e8-8f0e-407b-a403-ebd5e0f9bbb7
    04/18/2011 13:25:52.98 w3wp.exe (0x0238)
    0x12C4 SharePoint Foundation
    Monitoring b4ly
    High Leaving Monitored Scope (Request (POST:http://gateway:80/sites/nfp/ps/pmo/projects/_vti_bin/FormsServices.asmx)). Execution Time=121823.1919
    3fcc87e8-8f0e-407b-a403-ebd5e0f9bbb7
    04/18/2011 13:25:53.01 w3wp.exe (0x0238)
    0x12C4 SharePoint Foundation
    Logging Correlation Data xmnv
    Medium Name=Request (GET:http://gateway:80/sites/nfp/ps/pmo/projects/_layouts/error.aspx?ErrorText=Request%20timed%20out%2E)
    edd963de-a016-49d1-9400-f3d5aaf489a5
    04/18/2011 13:25:53.01 w3wp.exe (0x0238)
    0x12C4 SharePoint Foundation
    Logging Correlation Data xmnv
    Medium Site=/sites/nfp
    edd963de-a016-49d1-9400-f3d5aaf489a5
    04/18/2011 13:25:53.03 w3wp.exe (0x0238)
    0x12C4 SharePoint Foundation
    Monitoring b4ly
    Medium Leaving Monitored Scope (Request (GET:http://gateway:80/sites/nfp/ps/pmo/projects/_layouts/error.aspx?ErrorText=Request%20timed%20out%2E)). Execution Time=10.147
    edd963de-a016-49d1-9400-f3d5aaf489a5

  • Error when publishing AICC

    I am getting the following message when publishing in
    Captivate 3.
    "The reporting type selected for this project is AICC which
    is unavilable with the standard publish."
    Any idea on how to correct? Thanks!

    MaryLou,
    When you are publishing - are you publishing to an EXE file?
    I could expect
    an error like this if you are trying to publish to EXE and
    potentially other
    formats.
    Regards,
    Andrew

Maybe you are looking for